Adds runtime CPU detection for Windows and macOS, and switches feature
detection of AES to runtime like for x86,
So far only on ARM64, since gcc doesn't do function versioning on ARM32,
but clang can, so it could be added later.
Change-Id: Ibe5d60f48cdae3e366a8ecd6263534ba2b09b131
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MSVC does not have pthreads.
"QT_FEATURE_thread" should mean "Enable thread support".
And I think this note is only meaningful for WASM. For other platforms,
thread support should be enabled by default.
amends 4972fdb350
Change-Id: I5a4fc05219c9b2ff9c6e54fd444b4b94230727bb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And adjust configure.json files that were stale
Amends d385158d52
Change-Id: I851838a12c3773a6e8119ebc7f1de941ae7fe224
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add SOLARIS cmake platform definition.
Add settings for QT_DEFAULT_MKSPEC so that qplatformdefs.h can be found.
Solaris has its gssapi symbols in libgss.
Solaris supports @ORIGIN.
Solaris ld does not support --dynamic-list needed for reduce relocations.
Make solaris fail the reduce relocation test.
getauxval is specific to GNU libc and some other libc implementations on
Linux but sys/auxv.h is not. The bootstrap uses sys/aux.h as the only
indication for getauxval. This breaks builds on Solaris, so only make
sys/auxv.h an indicator for getauxval on linux or glibc based systems.
Solaris uses X11 so add it to the X11_SUPPORTED list.
Solaris network libraries for sockets etc are in socket and nsl.
ifreq does not have a member ifr_ifindex on Solaris, it uses
ifr_index. Add test to check if ifr_index is a member of ifreq.
The first struct in the in_addr union on solaris is defined as four
uint8_t, therefore four arguments are needed for its initializer list.
Change-Id: Ieed4c1bbac8559a7ae1db9c4e1e91f609f150270
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Xcode allows building a project targeting either the device or
simulator sysroot in one single build dir, but for the sysroot
switching to work there should be no linker or compiler flags
referencing absolute paths of a specific sysroot.
During CMake configuration of a project targeting iOS, all found
system libraries will be within one single sysroot, either the device
one or the simulator one, whichever one was passed to
CMAKE_OSX_SYSROOT. CMake will then generate the Xcode project
and pass those absolute paths, which makes sysroot switching within
Xcode not work.
To avoid that, the CMake documentation recommends passing linker and
framework flags of the form '-lfoo' and '-framework bar' instead of
absolute paths. Xcode then takes care of setting the correct framework
search path.
Zlib is one of the libraries found in the iOS sysroot and thus passed
as absolute path.
To avoid that, create a new FindWrapZLIB find script. The target it
creates will pass the absolute path to the library on non Apple
platforms and an -lz linker flag on Apple platforms (macOS and iOS).
To avoid issues with target global promotion when system PNG package
is found, ensure that a found ZLIB::ZLIB target is promoted to global
manually in src/gui/configure.cmake.
Pick-to: 6.1
Change-Id: I8bd8649be4f680a331ad51925f27cb9d13ac5e5f
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
CMake 3.18 introduced the file(ARCHIVE_CREATE) API that we use with
COMPRESSION Zstd for compressing corelib's mimedatabase.
It's possible to build CMake without proper zstd support, and we have
encountered such builds in the wild where the file(ARCHIVE_CREATE) call
crashes.
Add a configure test to determine whether CMake properly supports the
Zstd compression method.
Fixes: QTBUG-89108
Change-Id: I37e389c878845162b6f18457984d4f73a265b604
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to feed gn with linker info for qtwebengine build.
Change-Id: I4bd96af8bb8a1927e4c03e5c5d4ade10a0876eb1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed for QT_FEATURE_foo checks in repos other than qtbase when
building SIMD specific files (e.g. qtimageformats).
Task-number: QTBUG-85447
Change-Id: Ibd2200fe24cecbb0b2a092f645ca622baf738601
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Setting a lib infix is not supported with framework builds due to the
nature framework of include resolution: includes like <QtCore/qstring.h>
won't work if the framework is named QtCoreInfix.
The combination framework build and lib infix was agreed on to be out of
scope in the comments of QTBUG-35604.
Pick-to: 6.1
Change-Id: Ib7c6983f2f64ea1a7cfcd56657d31eeab3f55fe3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The generated code contained many repeated blank lines.
Most main()s were preceded by one, but not all.
Only include blank lines for actual empty entries in lists, where
configure.json specified them, plus one before main if anything else
precedes it.
Change-Id: I6e6c34940e08712a1aa848a3c9ad1b0fb5806d77
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The main(void) signature obviates the need for unused parameters and
has existed since (at least) C89; so use that instead of the
old-fashioned argc/argv arguments we don't use in any of these tests.
Change-Id: Ibfe850a1fce378673c9781011475ea623fd75ad4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
At least, running util/cmake/configurejson2cmake.py changes these lines.
Adding them has provoked the script to add a .prev_configure.cmake file.
Change-Id: Idc123d1dee2ce51cd640c090c7910ecc1f0fc5a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Keep the c++2a feature, but make it an alias for compatibility
purposes.
Pick-to: 6.1
Change-Id: I6f153109be84659806f1b7a57a88a187875166d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Introduce the 'printsupport' feature to control whether the PrintSupport
module is built.
[ChangeLog][QtPrintSupport] Building of QtPrintSupport can be disabled
by passing -no-feature-printsupport to configure.
Fixes: QTBUG-90778
Change-Id: I8a9a4b7f8dd8f39a81565c8eb14ce1ae0839267d
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Nodir Temirkhodjaev <nodir.temir@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The AES and SHA features were checking for the wrong TEST_subarch_foo
variables.
Pick-to: 6.0
Task-number: QTBUG-87376
Change-Id: I46cd14d98832529aebac22cfcb01180330c5e091
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When checking the value of CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG>,
then <CONFIG> must be the upper case configuration name.
Also, we must not unset __qt_ltcg_detected, because the feature
condition evaluation happens way after the feature definition, and
__qt_ltcg_detected was not available anymore there.
This commit amends 96bdcdacbc.
Fixes: QTBUG-87874
Change-Id: I2b555bd1d7fbc8973e1d9493045c27d61b0d2c1b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
They are disabled for the qmake build due to QTBUG-71990, but the issue
doesn't apply to the CMake build.
Task-number: QTBUG-71990
Change-Id: I6c659e9dbbc947fd3c6241f9fab2ea306c98020b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a new feature called 'FEATURE_msvc_obj_debug_info' which
should allow usage of sccache for Windows MSVC configs.
Enabling the feature will replace the default '/Zi' compile flag
that CMake sets in Windows-MSVC.cmake with '/Z7'.
This ensures that the debug info is placed into the compiled object
file instead of placing it in the compilation .pdb file via
mspdbsrv.exe.
The final pdb file will still be created for shared libraries and
executables due to the linker '/debug' flag.
Static libraries will not have a .pdb file, instead the debug info
being embeeded in the .lib file.
The downsides of using '/Z7' are more disk space usage, slower
link times, more memory used for linking because the linker needs
to deal with more symbols.
The upside is that caching each indepedent cl.exe call is possible.
This is what Chromium uses with goma, and Firefox with sccache.
We're not enabling the feature by default to allow easier
testing (and switching it off) in the CI if it proves not to be
feasible.
It will probably have to be disabled at least for building
qtwebengine due to high memory requirements.
Task-number: QTQAINFRA-3934
Change-Id: I89e0e57995e938a780be318d1faec700194aa93f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Enabling it will force usage of '-O3' flag when building Qt.
If the platform has no '-O3' flag, use '-O2' as a fallback.
Task-number: QTBUG-86866
Change-Id: If13f7de954ba5c01dc9634f06a85529828fe90a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This option maps to FEATURE_reduce_exports. The feature is on by
default, except for MSVC. The reduce_exports configure test is not used
in the CMake build.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN target
properties are now explicitly initialized in the
qt_set_common_target_properties function, because we don't have access
to the feature in QtSetup.cmake where the CMAKE_<LANG>_VISIBILITY_PRESET
variables were set before.
Task-number: QTBUG-85373
Change-Id: I378453f0e0665731970016170302871e20ceb4e2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It causes issues in our Windows CI, because the strawberry perl
pkg-config is found. And even that one is unusable, due to a bug in
CMake which is tracked at
https://gitlab.kitware.com/cmake/cmake/-/issues/21239
Change-Id: I58816195d35459e8a44c923399c35a4956c222a2
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
This configure switch sets the CMake variable
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> per release config to ON.
The feature 'ltcg' is enabled if any of the variables
CMAKE_INTERPROCEDURAL_OPTIMIZATION,
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> are ON.
In order to implement the check, configurejson2cmake had to be extended
to be able to write extra CMake code before and after the feature
definition. This extra code can be added to a feature mapping below the
keys "cmakePrelude" and "cmakeEpilogue".
Task-number: QTBUG-85373
Change-Id: Ia2eb907edcf087f137977a9b090705397f83eb05
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
If '-make examples -no-compile-examples' was specified, sources of Qt's
examples would be installed, but the examples would not be built.
This switch has always been a source for confusion and is only
interesting for distributors, who can just package the examples
directory tree.
Change-Id: I0291d70e4951d98b553a4abf217db49d05316d3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The Android build for x86_64 fails with CMake. It should also fail with
qmake builds but the current multi-ABI build is testing the feature for
arm64-v8a only.
In [1], it's stated that AVX and AVX2 are not supported on x86_64 ABI.
[1] https://developer.android.com/ndk/guides/abis#86-64
Task-number: QTBUG-85982
Change-Id: I20c9366bdee2a13ca554ec67f5d0c041bd068b91
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The debug feature for the CMake build is solely determined by the value of
CMAKE_BUILD_TYPE or CMAKE_CONFIGURATION_TYPES. There is no point in
restricting the autoDetect expression to developer builds or MSVC and
macOS builds.
User-visible result: -DCMAKE_BUILD_TYPE=Debug now actually turns the
'debug' feature on, also for non-developer builds on Linux.
Change-Id: I65c92575c9483bff16beb78b60606c55aeadcece
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This configure switch controls the feature 'optimize_size'.
This isn't merely a mapping to CMAKE_BUILD_TYPE=MinSizeRel, because
we potentially want to combine -optimize-size with -force-debug-info,
which maps to CMAKE_BUILD_CONFIG=RelWithDebInfo.
Task-number: QTBUG-85373
Change-Id: I1a9343ebc54816f52e90e9d33ea3df4c99b1ec9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The configure argument -qreal <type> maps to the CMake argument
-DQT_COORD_TYPE=<type>.
Fixes: QTBUG-83325
Change-Id: I94970f31ccfb241b1dd4f1d9b6cef25d6684dc05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There's no way that Qt 6 will be binary-compatible with Qt 5.1.
Change-Id: Ic1abfbdc8dc497dcb24494a8f3e2d96bcf27ef83
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If certain 3rd party libraries have a version that's not suitable for
Qt, the configure summary should say so, rather than use them and fail
at build time.
With the current situation, we have to duplicate the version
information from the configure.json files in helper.py, by assigning
the version number as an extra find_package variable.
Rerunning configurejson2cmake then embeds this version info into the
qt_find_package calls in configure.cmake.
Some of the Find modules are rewritten to take the specified version
into account when looking for the libraries.
This involves moving around the code for creating a target, after
calling find_package_handle_standard_args() so we know if a good
enough version was found.
Task-number: QTBUG-82917
Change-Id: I139748d8090e0630cda413362760034dc3483e11
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In Qt5, the -qtlibinfix option did not affect the naming of plugins,
unless -qtlibinfix-plugins was set. This option was added in
5641650993 to offer a way to have -qtlibinfix affect the plugin names
without changing the default behavior. We now remove the
-qtlibinfix-plugins option, as the old behavior is not desirable.
[ChangeLog][configure] The -qtlibinfix option now affects the names of
plugins. The -qtlibinfix-plugins configure option was removed.
Task-number: QTBUG-15192
Fixes: QTBUG-85439
Change-Id: I96f5c2577b76274929c431621967df0e9b4631b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This adds the CMake equivalent to the classical -device-option key=value
configure argument:
-DQT_QMAKE_DEVICE_OPTIONS=key1=value1[;keyN=valueN]
The keys and values get dumped verbatim into qdevice.pri.
This patch also ports the machineTuple configure test. Its result is
written into qdevice.pri as value for the GCC_MACHINE_DUMP variable.
Change-Id: I29f2323fd87639fafaed99ec7446c7ee75504705
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The change fixes the labels to show up correctly in the configure
summary.
It also allows enabling the sanitizer via the feature flags, e.g.
-DFEATURE_sanitize_address=ON.
Finally the qtbase sanitizer option is saved in QtBuildInternalsExtra
so that repos built after qtbase have the same sanitizer options
enabled.
Change-Id: Ic9d9e3ce3c7ebbc244ced2e6d163d1ac8ee06b12
Fixes: QTBUG-84721
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The qt_internal_apply_gc_binaries function should apply both compile
and link flags, not just link flags.
The flags should be applied publically to all consumers of Bootstrap
regardless if the gc_binaries feature is enabled.
The flags should be applied publically to Core only in case if the
feature is enabled (aka for static builds only).
Change-Id: Id42af0d9b527004d74c04eff2c9e3c2be1e76aac
Fixes: QTBUG-84461
Task-number: QTBUG-83929
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The CI system can test this, but there's little reason to blow
up every developers compile time by 30%.
Change-Id: I7677b0411103fb1301ad087c884cc9bd22a5aee2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is Windows-only and must be turned on manually.
For MSVC it sets the MSVC_RUNTIME_LIBRARY target property.
For MinGW it adds the -static linker flag.
Change-Id: I9da3b88d545b34bc34a3a80301b2dd1b5986fa88
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This maps to the CMake variable QT_USE_CCACHE.
Change-Id: I3258027301284d907f6ecde6c65d2c0dde8f0a11
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This maps to the CMake variable CMAKE_INTERPROCEDURAL_OPTIMIZATION.
Change-Id: Id0ce48f176b95c27e74ab80276e89503b1660f79
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
