The latest XDG spec (0.8) defines XDG_STATE_HOME that does not exist
in QStandardPaths::StandardLocation.
Some Linux distributions clean XDG_CACHE_HOME on restart which makes
XDG_STATE_HOME useful as a path for saving application state.
This commit adds StateLocation and GenericStateLocation to serve as a
StandardLocation for XDG_STATE_HOME for all platforms.
This commit also updates docs and tests to fit the new changes.
[ChangeLog][QStandardPaths] Added StateLocation &
GenericStateLocation to StandardLocation
Change-Id: I470602466c37f085062cc64d15ea243711728fa5
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds a warning symbol.
Adds a note to the brief string.
Pick-to: 6.5 6.6
Change-Id: Ib036295bbcf7ab5eca7fd554fb2da836fedad8a0
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Added a template that we can use instead of rewriting the message for
every policy.
Pick-to: 6.6
Change-Id: I13cc182244d5f092e3d5677664bc149c6b126da5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The /coin directory is not installed, so trying to include a .qdocconf file using a relative path from an (installed) global configuration will fail.
Task-number: QTBUG-113326
Change-Id: I761b1a7eb19ca9d6a768f1367e30d5eaf80cb816
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The most common limit for the maximum number of allowed documentation
warnings is zero. Use a global value for 'warninglimit', adopted by
all Qt module documentation projects that include the configuration
from qtbase/doc/global.
This allows for a temporary increase of the limit across all modules as
needed - for example, when updating the QDoc binary that the CI
provisions to a version that introduces new types of documentation
warnings.
Increase this base limit temporarily to 10 to help re-enable
documentation testing in CI as it's currently disabled.
Task-number: QTBUG-113326
Change-Id: I8b66951ca9324bcfaec3b5a7ec2cff544c62feb0
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Adding some Qt Design Studio macros for global
qtdoc use. This would ensure flexibility for
the documentation writing.
Pick-to: 5.15 6.5 6.6
Task-number: QDS-10142
Change-Id: Id61a68d124aad1b8c8f9e17358fb5990efbab5de
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
QDoc allows code-expanding macros to be defined so that the user can
abstract away common code in a simple to use command.
Furthermore, macros allows for a different expansion based on the
currently generated format so that format-specific requirements can be
satisfied when required.
When format specific expansions are provided, QDoc considers the
resulting text as if it should be generated verbatim.
The "\raisedaster" macro is used to generate an superscript asterisk.
The macro is provided for both HTML and DocBook.
As the macro has format-specific expansions, the expanded code will be
read verbatim.
Nonetheless, while the HTML expansion expands to actual HTML, the
DocBook expansion expands to an equivalent QDoc code, which will not be
generated correctly.
To avoid the issue, the DocBook version of "\raisedaster" is modified so
that it produces the correct DocBook code.
Change-Id: I3a37838bda885af42f8d93b86ec08126d7146ff9
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QDoc allows code-expanding macros to be defined so that the user can
abstract away common code in a simple to use command.
Furthermore, macros allows for a different expansion based on the
currently generated format so that format-specific requirements can be
satisfied when required.
Due to a certain bug in QDoc, when generating the DocBook format, QDoc
would expand an HTML specific macro definition when a DocBook specific
one was not provided.
As this bug is now being fixed, the DocBook format will lose some of the
output that it was previously generating.
For example, the "\beginqdoc" and "\endqdoc" macros are defined, for
HTML, to expand to the beginning of block-comment text, "/*!" and ending
of block-comment text, "*/".
To avoid losing the usage of "\beginqdoc" and "\endqdoc`" when
generating DocBook, an equivalent expansion of the macro is now provided
for the DocBook format.
Change-Id: I45fb54f1f56077771c091323a69fd63e09a910eb
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
By default QDoc writes filePath attributes for each entry in the
.index file it generates. The attribute value is an absolute path
that's only relevant or useful for debugging purposes.
Pick-to: 6.6 6.5
Change-Id: I3bc646104af74b67c74350912359cf65ac252992
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QDoc allows code-expanding macros to be defined so that the user can
abstract away common code in a simple to use command.
Furthermore, macros allows for a different expansion based on the
currently generated format so that format-specific requirements can be
satisfied when required.
Due to a certain bug in QDoc, when generating the DocBook format, QDoc
would expand an HTML specific macro definition when a DocBook specific
one was not provided.
As this bug is now being fixed, the DocBook format will lose some of the
output that it was previously generating.
For example, the "\youtube" macro is defined, for HTML, so that a
youtube video can be embedded by reference.
To avoid losing the usage of "\youtube" when generating DocBook, an
equivalent version expansion of the macro is now provided for the
DocBook format.
Change-Id: Id74155f2c30b80b5f4490f8451cd8d00535806d6
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
By setting 'qhp' to true, QDoc will warn if qhp configuration is not
provided.
Pick-to: 6.6 6.5
Task-number: QTBUG-114181
Change-Id: I26bce80e888d0b0bd270ecdcc6c0774298076a4b
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
It adds nothing new to what the trivial and license wizard examples
show, other than a bunch of somewhat messy and outdated code to generate
C++ code files based on the input.
The example is referenced in a few parts of the documentation, but there
are equivalent snippets in the trivial and license wizard examples, so
point at those instead, and add some relevant API usage where needed.
Pick-to: 6.5
Change-Id: If1ff57e775bad28920d9e019aeccae69d1f4d127
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
QDoc adds a 'Status' field to the table on top of type reference pages.
One common status for Qt modules/types is 'Technical preview'. Add
an icon that is displayed next to the status description, highlighting
the fact that the type is in tech. preview and therefore subject to
change.
Pick-to: 6.5
Task-number: QTBUG-113026
Change-Id: Ibe6ca2a562cc7810fe27e7dcf514c711cd022894
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
There are two examples for Camera in Multimedia module. One of them is
using widgets, while the second one is QML based.
In such case the QML example is preferred for Android platform. That is
why only QML example should have android tag.
This commit remove android tag from qtMultimedia Widget Camera example.
Fixes: QTBUG-113238
Change-Id: I9d2c072fcc18e8e5a5a44a9a2da887a7b6660b46
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Argument passed to the \ingroup command should not be wrapped in
braces as it's read as-is.
Pick-to: 6.5
Task-number: QTBUG-111891
Change-Id: Ic759af37e8b7e9f60651103b395fdd7e630779c6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Examples in Qt's codebase must be tagged with specific categories
such that Qt Creator can group them thematically. This can be done
by way of using the `\meta category` construct in QDoc.
At the same time, we want the generated documentation to group the
examples by the same logic as in Qt Creator. Hence, QDoc was modified
to implicitly add a group for each category that is used in a
`meta category` invocation.
By design, QDoc exposes ways to list groups to users, but no way to list
the \meta command invocations. Letting QDoc implicitly add a group for
categories passed to the \meta command as a side-effect, therefore breaks
with the principle of least surprise and the single responsibility
principle.
An alternative solution makes use of QDoc's existing support for code
generation through macros. This patch introduces the macro
`\examplecategory` as a global macro throughout Qt to achieve the same
effect as the aforementioned change to QDoc. The macro takes an argument
enclosed in curly braces. This argument is the example category name. It's
used as meta information in the manifest files consumed by Qt Creator, and
added as the category group name for the QDoc side at the same time.
The introduction of this macro allows reverting the change to QDoc
itself, while maintaining feature parity for both Qt Creator and the
generated content.
Task-number: QTBUG-111891
Pick-to: 6.5
Change-Id: I311b98168253b45ac456ff3c1824db3d835191a9
Reviewed-by: Luca Di Sera <luca.disera@qt.io>
It doesn't showcase anything interesting that other examples
don't already show off.
Pick-to: 6.5
Change-Id: Ie95c3ddb3ff52b3beab54bd6fa75fb75ae5c7ba5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
The previous example finished way too quickly and provided no real
value in regards to API understanding. Previously, QtConcurrent::map
was used, which was also used in other examples. We are now using
QtConcurrent::filterReduce to demonstrate other functionality.
Task-number: QTBUG-111165
Pick-to: 6.5 6.5.0
Change-Id: Ibd6eb119d0711cddfe8b211d460e9d67d6ce95c3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Added a QFileDialog to let the user select a path. Before, the path
was statically assigned with "../../" , which is not optimal.
I also modified the findFiles function to check for text files in
general and not only *.cpp and *.h files. Lastly the result of the
word counting is now displayed on the console, as I think this is an
informative output from this example.
Task-number: QTBUG-111165
Pick-to: 6.5 6.5.0
Change-Id: Ie27c6acb4f79a78e3bef141edb92de08901fde71
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Removed side panel and swipe to remove examples as part of patchset
3bc6f344a8f10699313c3e0c9236dd6945edd895 and updated docs to reflect
that change.
Fixes: QTBUG-110989
Pick-to: 6.5.0
Change-Id: I6241dd9842b1584e3dd25057591fe29eaa34d579
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
All QtQuickControls examples are marked for android by default.
However, the To Do List example is iOS specific so don't include it.
Add it to the list of iOS tags instead.
Fixes: QTBUG-111426
Pick-to: 6.5 6.4
Change-Id: Ic89d6b40d263f81ed402a2064f2e44b2fa826940
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
qdoc does ignore image directories if no file with 'known' suffix
is found.
[ChangeLog][qdoc] *.webp has been added to the list of default image
suffixes.
Pick-to: 6.5
Change-Id: I49524ea13d14dd7e246401dec7deb2ba4e66cb07
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This is almost exactly the same as the "Analog Clock" (widget) example.
"Analog Clock Window Example" demonstrates:
* How to render to a QWindow (covered by RasterWindow example)
* QPainter and transformations (covered by Analog Clock example)
* How to use QTimer (covered by Analog Clock example)
Pick-to: 6.5
Change-Id: I7f20a29798830ed6345eca250e4139cb314cab84
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
It demonstrates timerEvent() and some QFontMetrics
There are other examples that demonstrates this
Pick-to: 6.5
Change-Id: I4ad6f30c8ef93c995f980545ed88ab13b9aa9c7d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We only support Qt 5.15 since a while, so the detailed information in
which Qt 5 version a particular class, function, or enum was introduced
is becoming less and less relevant.
Pick-to: 6.5
Change-Id: I39bd579f23abc0ac84879e9bd22e6a97651ef7c3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Google translate drops the space around the non-translatable
inline text. This should ensure that inline anchors have extra
margins.
Change-Id: I1c204a9a27d0a39256ef04aa3f03ba1b8433aa54
Done-with: Topi Reinio <topi.reinio@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Which can be used by Qt Creator and Assistant.
Task-number: QTBUG-97125
Task-number: QTCREATORBUG-26557
Change-Id: I03e5ac0a15f84101c73887724693e9eb27670754
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
The same kind of line is required for DocBook as HTML or QHP. This
change makes that requirement clear.
It was suggested by Nicholas Bennett in a change in existing
configuration for this exact line.
Change-Id: I664300f229bac9931c6f1ac4a08bd7c8c42bf37c
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Four examples in QtQuick module had wrong tag in qdocconf file:
-QQuickRenderControl D3D11 Example
-Scene Graph - Direct3D 11 Under QML
-Scene Graph - Metal Texture Import
-Scene Graph - Metal Under QML
The first two are specific to Windows. The other two are IOS specific.
They were all marked as "android".
This commit changed those tags to correct one.
Pick-to: 6.4 6.4.0 6.3
Fixes: QTBUG-106436
Fixes: QTBUG-106438
Fixes: QTBUG-106439
Fixes: QTBUG-106469
Change-Id: I3d8d3cb54e4e552d7574c7c2f1d59437374c6446
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Copy them from QRegExp docs in qt5compat to
doc/global/includes/corelib/port-from-qregexp.qdocinc, so that the
porting docs can be included from both Qt 6 porting guide and qt5compat.
Task-number: QTBUG-89702
Pick-to: 6.4 6.3 6.2
Change-Id: I616e2333f60f36e4851398479939fd062016748d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Cpp.ignoretokens, Cpp.ignoredirectives, falsehoods are not
used anymore by clang based qdoc.
Most defines are not needed, either, because clang based qdoc
will get these defined by scanning the normal headers. And QDOC,
Q_CLANG_QDOC is actually set by qdoc itself.
What's left is Q_GUI_LIB, Q_WIDGETS_LIB, which is used in headers
modules to make some API conditionally available. Finally, there's
QT_KEYPAD_NAVIGATION, which seems to be a Qt 3 thing, but still
some documentation depending on it ;)
Pick-to: 6.4
Change-Id: Ib9cf0debac8d569cc21271087168a46c0f8635ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Hide the 'template magic' to implement Q_WEAK_OVERLOAD from the
documentation. So far Q_WEAK_OVERLOAD void foo() lead to
template <typename> void foo()
in the generated documentation, which is arguably confusing to the
uninitiated. And people interested in implementation details & exact
overload resolution will arguably just read the .h files themselves.
Fixes: QTBUG-104851
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I5e0b1b337b28e621e6a627241aa8037da0a879a7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
qt-module-defaults-online.qdocconf includes online-specific overrides
for some of the documentation macros. This needs to happen also in
the commercial template to have equivalent behavior.
Pick-to: 6.4 6.3
Change-Id: I2ca3246fbf16cef502e8eada056df6e8db573d5d
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
