On OS X and Windows, this was not working, because the socket was being bound
in v6 mode (due to ::Any being for dual mode), but the address passed was a v4
address, meaning it took the wrong codepath. Linux, strangely, apparently works
anyway.
This is fixable in OS X (by using the v6 join path when bound in v6/dual mode),
but the same fix doesn't work on Windows, failing with WSAEADDRNOTAVAIL.
Don't allow this behaviour, and provide a sane error message telling the user
what to do instead.
Done-with: Shane Kearns
Task-number: QTBUG-25047
Change-Id: Iaf5bbee82e13ac92e11b60c558f5af9ce26f474b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This is unfortunately still "most of them", because of QTBUG-24451
however some of the unit tests are still possible to test stably.
Also skipped test cases which would hang forever due to QTBUG-24451.
Bearer tests are not run, because they pass when test machine has no
wireless LAN, but fail or hang if it does (QTBUG-24503)
Change-Id: Icf99d45707102d2ef9219ed0b5ad521605716219
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Windows unhelpfully writes to only one byte of the output buffer
when getsockopt is called for a boolean option. Therefore we have
to zero initialise the int rather than initialising to -1 as was
done before.
This in general only works for little endian architecture, because
the word would look like 0x01000000 on big endian. So I have added
some compile time asserts in the assumption that windows is always
little endian. This is ok for comparisons with 0/false, but not
comparisons with true or nonzero values.
In the case of IPV6_V6ONLY, it is documented as DWORD (unsigned int)
but on some windows versions it is returned as a boolean triggering
the warning. I removed the warning, as the conversion to int works on
both LE and BE since it is only compared with zero.
Task-number: QTBUG-23488
Change-Id: I3c586d1ada76465fc045a82661f289920c657a4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is broken in a couple of ways. A few one line fixes
combined into a single patch.
1. Linux is the only OS that does
abstract unix domain sockets by prepending a null as the first
character. Don't test this on non-Linux platforms and expect
it to pass.
2. Change QVERIFY2 to QCOMPARE so we can see why this
fails in CI but no on the local system. Use QCOMPARE
where possible.
Change-Id: Ic3d2cf9696730dc4d6589539fdfe8a48ccf28de5
Reviewed-by: Alex <alex.blasche@nokia.com>
Due to recent changes in the test it should now compile
and run properly. This re-enables the test.
Change-Id: I6c647d99fa1f1b1c53e006fef2865d6be08ec16c
Reviewed-by: Alex <alex.blasche@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
QLocalServer could only listen to sockets it created.
Thi is not always possible as sockets may be passed
by socketpair() or have to be created locally by
other means. This adds a similar feature to QLocalSocket
where a native descriptor maybe used.
Change-Id: I43b0af179b3b868dd164d4e1fd312ff4546cf9ff
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Tapani Mikola <tapani.mikola@nokia.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QAuthenticator used it for the convinience of QHttpSocketEngine only.
QHttpSocketEngine has now been ported to use QHttpNetworkReply to parse
HTTP responses.
Change-Id: Idf6e70aa76613aad6e3d789d81ca1b4fd73575c2
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Windows x64 uses 64 bits integer for sockets, to ensure compatibility we
should use ptr sized integers for our socket descriptors.
Task-number: QTBUG-19004
Change-Id: I4b56023874a4f1bad107c66c054fecfedde33d88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: If36b1b8f69c3509128786fec67899ae18ffaa2bc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This testcase fails on the Ubuntu 11.10 x64 platform, add flag to .pro
file so test is ignored on this platform.
Task-number: QTBUG-23380
Change-Id: I51831df8c8e9bfcf63d3689e37552ca1a62691cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMessageBox was being used to test nested event loops. This has been
changed to use QEventLoop directly.
Also, there was an unnecessary use of QPushButton to trigger a test
case, which has been removed.
As a result, 3 test cases can be run on VXWORKS, and one more test case
on Windows that were previously skipped.
Change-Id: Ic65ed441cd37d242f89df3ef3b8638a1458d9cf3
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
tst_QTcpSocket::disconnectWhileLookingUp required the host lookup +
connect + disconnect procedure to complete in <50ms, which is not always
true.
When disconnecting (rather than aborting with close()), wait for the
disconnection to complete with a timeout of 5 seconds.
Task-number: QTBUG-21043
Change-Id: I3b59abf9a8eb2c6d99416e1a8ec6b528885b656e
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
setSocketDescriptor fails because socket is in the wrong state.
This is timing dependent, if qt-test-server is still in the DNS cache
then the test failed.
- clear the DNS cache to avoid the host lookup state being skipped.
Change-Id: If159d514b1aa9b62a4834f6352d5e7b0a00a5724
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
bind() test failed if there is an autoconfigured IPv4 address.
e.g. bluetooth adaptor that is not attached to a network.
Or WLAN adaptor in peer-peer mode.
- solved by skipping the autoconfigured IPv4 addresses in the same way
as IPv6 addresses are already skipped
bind() test fails for proxy
- skipped, QTBUG-22964 created
Change-Id: I9a799ae8db421783f474e97cf876d6e265516397
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When listening on QHostAddress::Any, serverAddress() should return
QHostAddress::Any too, assuming that setting the socket options
was successful.
Task-number: QTBUG-22899
Change-Id: I50a9ff1b4ad0c1c1905e2952c595d7068df2627d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This should be API-compatible with Qt 4, but is not ABI-compatible, due to
removing the enum from QUdpSocket.
Task-number: QTBUG-121
Change-Id: I967968c6cb6f96d3ab1d6300eadd5bde6154b300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: Ie44b6ea8dd496857ea264f730148d3dc4f5c8324
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This commit re-enables tests that are assumed to be ok by now, since they:
- Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829).
- Did not have any known issues associated with them.
Note that not all of these tests were disabled as a result of QTBUG-21402.
Task-number: QTBUG-21402
Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The platformsocketengine autotest uses the native socket engine directly
rather than through QAbstractSocket. The bind tests were failing because
the autotest was creating a socket with IPv4 (AF_INET) and then binding
with QHostAddress::Any (AF_INET6).
A linux kernel update caused this to start failing on the test machines.
Change-Id: Iea62f3d56dbfb35fcb952dcf00313578eb2bd764
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a
Reviewed-on: http://codereview.qt-project.org/5941
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This change disables failing tests to increase the
likelihood that 'make check' terminates with a zero
exit status. This is done to prevent the CI system
from blocking further commits once qtbase#refactor
is merged into qtbase#master.
Failing tests are marked as insignificant (by putting
'CONFIG += insignificant_test' in the .pro file).
Note: This is a temporary measure that needs to be cleaned up
once the refactor->master integration is complete.
Ideally all disabled tests need to be enabled and passing.
All changes will be marked by the string QTBUG-21402 in a comment
for easy location.
Task-number: QTBUG-21402
Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d
Reviewed-on: http://codereview.qt-project.org/4678
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
