The documentation was previously code-heavy and short on exposition,
while focusing almost entirely on the CBOR converters. Prune most of
the CBOR code quotes, shuffle some snippet markers, add and remove
others and rewrite the main text.
Shift focus to the base-class for converters and how it's used by
main(). Retain relative focus on the CBOR converters, as they are
relatively full-featured hence illustrate more than the others do, and
replace the sequence of single-line sections about the others with a
section collecting all into a table and saying some general things
about them.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I8d41f25c165eb1a7ba20cb68aee6ab6b2fd050f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Out-only converters shouldn't need to implement loadFile(), as it
shouldn't be called - a converter is not used for input unless it says
it supports input. At the same time, provide the "ground state"
implementations for optionsHelp(), outputOptions() and probeFile() to
save the trivial implementations the need to duplicate one another.
In the process, make the handling of loadFile()'s outputConverter more
consistent among those that do implement it. Always set
outputConverter if it's initially null (the caller does assert this).
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I856d12c791d1f8e0accdb7dd1412d493117b2302
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mostly to pave the way for moving the class code to a file of its own,
but this incidentally saves the need to std::as_const() every use.
Moving the underlying object to a local static of a private method
also saves the need for heap allocation (which was leaked).
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I30f4bf3c46d39e04d0ac4e3e9ba431945ebb9193
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The Converter class, in the eponymous example, had a null member
variable that wasn't a nullptr - it pointed to an instance of
NullConverter - so that other converters could test whether a
Converter * they'd been passed was null (in the sense of pointing to a
NullConverter). This, however, was susceptible to misreading - I
misread one such comparison as a nullptr check and thus thought it
redundant with an earlier actual nullptr check. To spare future
readers similar confusion, replace the public static member variable
with a protected (since only other derived classes need it) static
predicate, to at least give the reader a clue that this is using the
word null in a class-specific sense.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I1e4f494b303d1bf90107f8c6fa3a4a22f6d81b90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old name didn't say what sort of thing it was converting; and our
guidelines for examples discourage using the word Example in the
title. Also reword the description of the tool in the command-line
parser and an assertion.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I6f52f5227362b4b807c8aabfd2103287af42bca0
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The serialization conversion example used raw C's way to abort on
error; change to using Qt's way of doing the same. Likewise, convert
the various other uses of fprintf(stderr, ...) to qWarning() and of
printf(...) to qInfo().
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: Ia8821d3c20f58f71c106028ec422ad473c11e164
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Have the text dumper do the same as all the others, instead of
ignoring unknown options.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I3c1dcbeda19e679be562110e44c5f566dfcc79ce
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The extra code for using the OpenGL paint engine is significant enough
to be distracting from what the examples are supposed to show. If we
want to show how to use QPainter on an OpenGL widget, then we can make
dedicated and documented examples for that, in the OpenGL category. And
we have such examples in the Qt OpenGL module anyway.
As is, the examples feel more like manual tests of the OpenGL paint
engine; if we need more coverage there, then we can add it there.
Change-Id: I7b56ea6d08c02cd0a1050ab03991656a0538498d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Drop the home-made solution with mutex and bool (which could have been
an atomic, but we have had a ready-made solution in QThread for a long
time).
Pick-to: 6.5 6.6
Change-Id: Id213a021f0ae94215afb28ff874fcb597dd1e6f9
Reviewed-by: MohammadHossein Qanbari <mohammad.qanbari@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mikko Hallamaa <mikko.hallamaa@qt.io>
Reviewed-by: Ed Cooke
The important bits from the example are ~10 lines of code, no need
for building a poor-man's version of a graphics or item view.
Pick-to: 6.6
Change-Id: I7874c66765c5b46230c92846ee3de1ee83f47e45
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
When adding custom buttons to a QMessageBox the return value of exec()
as well as result() is not a StandardButton value, but instead an opaque
value, and the documentation says to use clickedButton() to determine
which button was clicked.
Pick-to: 6.6 6.5
Change-Id: Ib47a218989b4dcb5d51f648bc55bc02399bae602
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Partly because it also saves to CBOR, but also because our guidelines
say to avoid using "Example" in the title.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: Id858475a6b0474228cfe8044e188cc763f56e3a8
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Although used mostly in the same files, they're separate types, so
define them in separate places.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I9e64b382ad48f9a74e432ccd49b6f5fcc9316da3
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The server used to hardcode the name while the client allows the
user to specify it. The server's UI is adjusted to let the user first
specify the server name he wants to listen to and second stop listening
to the current server.
Task-number: QTBUG-117064
Pick-to: 6.6 6.5
Change-Id: I80fc976151ead7a181fbc32080597277bc515313
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QItemDelegate was superseded since Qt4 by QStyledItemDelegate but it
took until Qt6.7 to remove the last occurrences in qtbase.
- remove unused includes / replace with qabstractitemdelegate.h
- replace references in the documentation with QStyledItemDelegate
- adjust the examples and tests to use QStyledItemDelegate
Pick-to: 6.5 6.6
Change-Id: I246755004ce2d01192a726ca0972106c237df0cc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The whole Q_DECLARE_METATYPE part is superfluous in these two examples,
as QVariant works with any type as long as it is copy-constructible.
And QVariant will call the equivalent of qRegisterMetaType, so that
doesn't need to happen, either.
Showing how to integrate the type with qDebug is fine in theory, but
also a repetition of content that can be found in other places.
Given that there isn't much else being shown in these two examples, it's
better to remove them from examples and move them to manual tests.
Some parts of "Custom Type Example" were used as snippets in other
documentations under qtbase/src/corelib. So, they were added in
customtypeexample.cpp file in the snippets folder.
Fixes: QTBUG-117001
Pick-to: 6.6 6.5
Change-Id: I45b16338912e3f7394cbb5169642bd31af32d5e1
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
* Fix references to Wait Conditions Example, Semaphores Example, and
MIME Type Browser Example as they were renamed.
* Rename 'Shared Memory' example as its title clashes with
the title of another page (sharedmemory.html).
src/corelib/global/qfloat16.cpp:
* warning: Invalid '\relates' (already a member of 'qfloat16')
Pick-to: 6.5 6.6
Change-Id: Ia28be8e3882a7ad1fadcdbd50a657705d58526bd
Reviewed-by: Andreas Eliasson <andreas.eliasson@qt.io>
Declare stopProcess() as a method because it's used in the connect()
overload taking a pointer-to-member-function, so it doesn't need help
from moc.
Task-number: QTBUG-117147
Pick-to: 6.6 6.5
Change-Id: Iaa1c02de82cffdea455af520c37dc0e6e6861443
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Fix includes order and add the needed ones to avoid transitive includes.
Remove QT_{BEGIN,END}_NAMESPACE because these are private Qt macros that
should not be used in the examples.
Task-number: QTBUG-117147
Pick-to: 6.6 6.5
Change-Id: I6caa0a59f2ab4dfec6fb558a0896c27b05b6a5db
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The setup of the input and output converters is fairly complex but was
made harder to read by nearly-duplicating its logic for input and for
output. Break out into a separate function to make clear what parts
differ between the two and what parts don't. In the process, allow the
search for a named converter to continue past a match that doesn't
support the needed direction, on the off chance of a name collision.
Make an error message more articulate in the process.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I2a9de8b406c538098076f388fc8a1980b91fe16b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Declare sendFortune() as a method because it's used in the connect()
overload taking a pointer-to-member-function, so it doesn't need help
from moc.
Q_OBJECT is not needed anymore as the "Server" class doesn't contain
signals and slots anymore.
Use Q_DECLARE_TR_FUNCTIONS Macro to allow tr() calls.
Task-number: QTBUG-117064
Pick-to: 6.6 6.5
Change-Id: Id197cb4c9f9df2102b769d028d8a0cae91e5c492
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Fix include order to respect the Coding Conventions.
Add needed includes to avoid Transitive includes.
Remove uneeded classes.
Remove QT_{BEGIN,END}_NAMESPACE because these are private Qt macros that
should not be used in the examples.
Task-number: QTBUG-117064
Pick-to: 6.6 6.5
Change-Id: Ie98d4fbddb18d5578e2651bdb4850527ff984582
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Create QString at compile time using the literal operator""s instead of
using pointer to characters. This way, no conversion or allocation will
occur at runtime.
Task-number: QTBUG-117425
Pick-to: 6.6 6.5
Change-Id: I2a19d4fe1150aad7908d0c2a7215099bc0814e8d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Create QString at compile time using the literal operator""s instead of
using pointer to characters. This way, no conversion or allocation will
occur at runtime.
Task-number: QTBUG-117422
Pick-to: 6.6 6.5
Change-Id: I92eed0a371bf6383ddb1e938646029f1c24242bf
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reorder the includes following the coding conventions.
Remove unneeded includes.
Add needed includes to avoid Transitive includes.
Task-number: QTBUG-117422
Pick-to: 6.6 6.5
Change-Id: Iaf2b939bc160312de8aa4035da03b648cf76f17d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
When declaring MimetypeModel class, use Q_DECLARE_TR_FUNCTIONS Macro
instead of Q_OBJECT as we only need to call tr() functions.
Task-number: QTBUG-117146
Pick-to: 6.6 6.5
Change-Id: Ic7afd4a806d57ba2a651ebe129f3a91f35764354
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Fix include order to respect the Coding Conventions.
Remove QT_{BEGIN,END}_NAMESPACE because these are private Qt macros that
should not be used in the examples.
Task-number: QTBUG-117146
Pick-to: 6.6 6.5
Change-Id: Iba7a4726180ec97d9654ed3b934baca8c1df0b5c
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Fix code lines that do not respect the 100 characters limit rule.
Task-number: QTBUG-117146
Pick-to: 6.6 6.5
Change-Id: I9833e9a25a09833b3e0384c95af8a422d5aa4582
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Both executables (subscription, bindablesubscription) are documented
as one project. Make sure that e.g. Qt Creator can also load this
project.
Fixes: QTBUG-117109
Pick-to: 6.5 6.6 6.6.0
Change-Id: I3912f2f76379940b02f3a57a7a55440a30366755
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move the rsslisting example documentation to examples/network/doc,
as it is done for all the other examples.
Fixes: QTBUG-117215
Pick-to: 6.5 6.6
Change-Id: If83202825afe8c69cb7fda0f84ca4832cf3d60e7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added to the list of important links on the Android Platform home page.
Task-number: QTBUG-116780
Pick-to: 6.2 6.5 6.6 6.6.0
Change-Id: Id65a73d56bff0b288ebb1da098f6dbd8cbbe606e
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Create QString at compile time using the literal operator""s instead of
using pointer to characters. This way, no conversion or allocation will
occur at runtime.
Task-number: QTBUG-117036
Pick-to: 6.6 6.5
Change-Id: I9942ef8efa38de9ac5975799249a65fcb4c966c9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Fix include order to respect the Coding Conventions.
Include individual headers instead of "generic" headers.
Remove QT_{BEGIN,END}_NAMESPACE because these are private Qt macros that
should not be used in the examples.
Task-number: QTBUG-117036
Pick-to: 6.6 6.5
Change-Id: I33f9c54098824bfcfacac7c2f624554e105a291a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
