Also contains some fixes which fix the Windows build, amending
e1b8257dee.
Pick-to: 6.3
Fixes: QTBUG-101294
Fixes: QTBUG-101304
Change-Id: I779f50fc705ed32f0314daf28b39b477a7fe925d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also include the comprehensive tests for bool cast compilation which I
originally wrote to confirm that the QTEST_ASSERT() change should be™
correct.
Pick-to: 6.3
Task-number: QTBUG-101406
Change-Id: I9a2871bfd4be9999b7a720bec775bba7aeffbe24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
... if there aren't any.
Pick-to: 6.3
Change-Id: I8531e0c1c3ca41d1b1a9d55c9d11782bd63b6f76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In constExpr(), where code incorrectly assumed conversions to int or
uint were implicit, make them explicit.
In classEnum(), don't test bitwise operators between QFlags and
int/uint when QT_TYPESAFE_FLAGS is in effect.
Pick-to: 6.3
Fixes: QTBUG-101294
Change-Id: If119bf56dd12778f7231a9e76293c76e75354809
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes it easier to interpret the output from the test, because of
embedded newlines.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f141e09537f4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Simplifies the code. And removes the unnecessary quote around the
pattern that was there, for some reason.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f135edf6993b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These tests rely on reading output sent to stderr, so make
sure their output does go there.
Pick-to: 6.2 6.3
Change-Id: If62c073101c1d2e3d64f8cb2769d67f3b9fbeefb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- current INTEGRITY development pack don't support denormals for float and double.
All values are rounded to 0.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: Iaaacdc4210c7ac2ec3ec337c61164a1ade0efb01
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Switched to use runtime path instead of compile time path for the
helper executable. Some tests cases were failing on webOS because of
wrong path.
Fixes: QTBUG-99846
Pick-to: 6.3
Change-Id: I566bc04bdb96ac6e7dd0a875eadb50685aef8282
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Stress test creates too many threads on run time.
Testing system is limited in 123.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I215074fa432c8aa18b2a753169646841c01d0b2a
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Especially static inline variables. This greatly reduces the amount of
code that existed in macros, moving them to templates.
Additionally, this removes one level of indirection from
Q_APPLICATION_STATIC by removing the std::unique_ptr. We now directly
manage the object's storage.
Change-Id: I2cffe62afda945079b63fffd16bcc825cc04334e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
- GHS compiler is not fully compliant with iec559. Therefore we need
to update is_iec559 checking for GHS case.
Pick-to: 6.2
Change-Id: Ia094509d26bf5f0109f2937547a056267019cffb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reduce overhead for including qguiapplication.h by splitting
up qnativeinterface.h into a public and a private part.
[ChangeLog][Potentially Source-Incompatible Changes] The
qguiapplication.h header no longer implicitly includes
qloggingcategory.h. If your code depends on the transitive
include, explicitly include <QLoggingCategory> where needed.
Pick-to: 6.2
Task-number: QTBUG-97601
Change-Id: Ic02327a1c3092e21730160af5c59a9d58dc1239c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adding new entries to QOperatingSystemVersion in patch releases
was previously breaking our BC guarantees because the entries are
exported, thus users cannot freely switch between different
patch-releases without a recompile if they adopted the new entries.
Move the data itself to a base class so that the entries can be
constructed inline.
Task-number: QTBUG-97808
Change-Id: Ic44f07488af8a04a3bedc10bebb740c4d68f43f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch removes most of the checks that are made using C++20
__cpp_* macros for features available in C++17 and earlier.
Library feature check macros (__cpp_lib_*) are unaffected.
Change-Id: I557b2bd0d4ff09b13837555e9880eb28e0355f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In two cases, it was as easy as replacing an unnamed enum's values
with constexpr variables. In the case of QSimplex, I opted for
qToUnderlying(), as the enum made sense on its own.
Change-Id: Ifcf5be14bd2f35e50adabdbd7ecdb2e83f6bf5b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The use of a freestanding function is not needed now that the name
doesn't alias the nativeInterface accessor function, and was just
adding complexity to the machinery.
People not familiar with the code will have an easier time following
the flow through the helper member function, and we no longer need
to declare our own export macros.
Pick-to: 6.2
Change-Id: I17530b7e89939cfc19ab8ffaa076b7129ae02dcf
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
By switching out the static_assert for an enable_if we end up producing
a clearer error, at the call site:
/qt/qtbase/examples/gui/rasterwindow/main.cpp:69:9: error: no matching member
function for call to 'nativeInterface'
app.nativeInterface<QNativeInterface::QCocoaGLContext>();
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/qt/qtbase/src/gui/kernel/qguiapplication.h:176:5: note:
candidate template ignored: requirement
'NativeInterface<QNativeInterface::QCocoaGLContext>::isCompatibleWith<QGuiApplication>'
was not satisfied [with NativeInterface = QNativeInterface::QCocoaGLContext, TypeInfo =
QNativeInterface::Private::NativeInterface<QNativeInterface::QCocoaGLContext>, BaseType =
QGuiApplication]
QT_DECLARE_NATIVE_INTERFACE_ACCESSOR(QGuiApplication)
^
By using SFINAE for the TypeInfo we can also ensure that it works for
types that are not native interfaces, such as if the user tries to
call nativeInterface<QString>().
Since we can no longer use decltype(*this) to resolve the base type
we need to change QT_DECLARE_NATIVE_INTERFACE_ACCESSOR to take the
type as an argument, as we do for other QT_DECLARE_FOO macros.
Pick-to: 6.2
Change-Id: Ie3f7e01ab7c3eb3dcc2ef730834f268bb9e81e0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
GCC can't see through all the foreach code to determine whether the
loop will execute at least once, so don't play hardballs with the
compiler and initialize the variable.
Change-Id: I95756a99eda497a25aa277046df9895f558758c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test uses a 64-unit array and deliberately clears various portions
of it, provoking a gcc warning:
warning: ‘memset’ used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
The calls to memset() do, in fact, have a sizeof(T) factor in their
size. Suppress this warning for the duration of that test.
Change-Id: I7d144d655a75f5ef4449fa3b956f80bcc509a83b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"Cherry-pick" of C++2b's std::to_underlying.
[ChangeLog][QtCore][QtGlobal] The qToUnderlying function has been
added, to convert an value of enumeration type to its underlying
value.
Change-Id: Ia46bd8e4496e55174171ac2f0799eacbcca02cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not just a compile-time one (that the macros compile and don't
raise warnings).
Change-Id: I5642bf242a6c26a33730708f3c1710237fc107a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFlags was lacking a named function for testing whether a QFlags object
contains _any_ of the bits set by a given enumerator/other QFlags.
Drive-by, add testFlags taking a QFlags, not just an object of the
enumeration; and simplify the implementation of testFlags to more
closely follow what its documentation says it does.
[ChangeLog][QtCore][QFlags] The testFlags, testAnyFlag and
testAnyFlags functions have been added.
Change-Id: Ie8688c8b0dd393d34d32bc7786cdcee3eba24d1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Analysis of problems with the new test for qFuzzyIsNull() revealed
that, where its version for double uses approximately 4500 * epsilon
and for float used 84 * epsilon as threshold, the qfloat16 version's
value was barely more than epsilon, with the result that the test had
to use a different value than the threshold to pass. (Converting the
threshold from float to qfloat16 and back made it bigger; in effect,
the threshold value was not <= itself.)
Furthermore, comparison with qFuzzyCompare() implied a value of
1/102.5 should be used, roughly 10 * epsilon, for consistency. When
1/102.5 is rounded to three significant digits (the precision we use
in QTest::toString(), for example), to give 0.00976f as threshold, we
get a value that, after conversion to qfloat16 and back to float, does
give a result <= what we started with. So change qFuzzyIsNull() and
its test to use this as qfloat16's threshold value.
[ChangeLog][QtCore][QFloat16] The qfloat16 threshold value for
qFuzzyIsNull() has changed from 1e-3 to 9.76e-3, almost a factor of
ten increase, for consistency with qFuzzyCompare()'s tolerance. Values
between these would previously have had qFuzzyIsNull(f) false despite
qFuzzyCompre(f, 1+f) being true.
Change-Id: I35816dce78da34a3e2339c8bc42d5bd03714a3f6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They were missing.
I also wanted to verify that it's true for sub-normal values.
At the same time, relocate qfloat16's implementation of qFuzzyIsNull()
to between those of qFuzzyCompare() and qIsNull(), since its apparent
absence initially confused me.
Change-Id: I9637c0070e754d16744c76fc9f846596257c6a63
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt defines some integral datatypes (qsizetype, qintptr, quintptr,
qptrdiff) not in terms of the corresponding language datatypes (resp.
make_signed_t<size_t>, intptr_t, uintptr_t, ptrdiff_t) but as "integer
types with the same bit size of the corresponding language type" (and of
course the corret correct signedness for the target type).
This makes the Qt datatypes not printable via printf-like formatted
output, incl. qDebug, qWarning, QString::asprintf and so on; that's
because there isn't a format modifier that would universally work
with the Qt definitions.
For instance, on a 32 bit platform, ptrdiff_t may be a typedef for long,
while qptrdiff is a typedef for _int_ instead. Both long and int would
indeed be 32 bits, but they still are different types, and this means
that the ptrdiff_t-specific 't' length modifier would be wrong for
qptrdiff:
qptrdiff p;
printf("%td", p); // WARNING: -Wformat: wanted long, got int
Similarly, not using 't' breaks on 64 bits, and so on and so forth.
There isn't a way out, short of inserting casts on every print
statement.
So, let's adopt the same solution C/C++ use for their own integer
typedefs: the PRIx macros. This allows one to always use the correct
formatting specifier without the need of a cast.
I'm not adding the macros for the qintXX datatypes, as they already
exist in the Standard Library.
[ChangeLog][QtCore][QtGlobal] A series of PRIxQTDATATYPE macros have
been added. They make it possible to print some Qt type aliases
(qsizetype, qintptr, etc.) via a formatted output facility such as
printf() or qDebug() without raising formatting warnings and without
the need of a type cast.
Change-Id: I473226a661868aed9514d793c8e6e4d391ab5055
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test causes frequent failures in the CI. This is the most
subtle fix until it is properly fixed.
Pick-to: 6.1
Task-number: QTBUG-91423
Change-Id: I6499378dcd3ed1c31275db38d83b572e764366cc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
I get a warning about the variable t_var being set but not used.
This patch fixes the warning.
Change-Id: Ib2df5ed2dddd283eb87f71a8b85951d1f67f04f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt is now always built with CMake.
The "cmake" keyword for QtTest blacklists remains for now. Removal is
tracked in QTBUG-90545.
Change-Id: I0011d56176a07c82698b2eb9aa330e77efa6cd34
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amend aa136d46e1 that changed qRound()
implementation to use __builtin_round() functions on ARM64 which do
not fail "round largest representable float less than 0.5" test,
unlike the simple version of qRound() used elsewhere.
Change-Id: Ic66cb0f826d91cd6a85ad72b646c79ded1c0eeca
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Add test for qRound that covers some edge cases for rounding. Note that
as of right now, this test fails and the docs have been updated to warn
that it should not be depended on for strict correctness.
Change-Id: I1a61bca47abd77855fe7c13ded44e913cc7e8722
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
std::optional<int> is the wrong datatype to use for compare.
First and foremost, it can't be used in the idiomatic form of
auto r = a.compare(b);
if (r < 0) ~~~ // a is less than b
if (r > 0) ~~~ // a is greater than b
which we *already* feature in Qt (QString, QByteArray).
Also, std::optional<int> (explicitly) converts to bool, which is
a trap, because the result of the comparison can be accidentally
tested as a bool:
if (a.compare(b)) ~~~ // oops! does NOT mean a<b
Not to mention extending this to algorithms:
auto lessThan = [](QVariant a, QVariant b) { return a.compare(b); }; // oops!
std::ranges::sort(vectorOfVariants, lessThan);
which thankfully doesn't compile as is -- std::optional has
an *explicit* operator bool, and the Compare concept requires an
implicit conversion. However, the error the user is going to face
will be "cannot convert to bool because the operator is explicit",
which is deceiving because the fix is NOT supposed to be:
auto lessThan = [](QVariant a, QVariant b) { return (bool)a.compare(b); }; // big oops!
Instead: backport to Qt the required subset of C++20's <compare>
API, and use that. This commits just adds the necessary parts
for compare() (i.e. partial ordering), the rest of <compare>
(classes, functions, conversions) can be added to 6.1.
Change-Id: I2b5522da47854da39f79993e1207fad033786f00
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 3e59c97c3453926fc66479d9ceca03901df55f90)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Four code-paths that weren't tested are simply those with the
parameters swapped from code-paths we did test. In any case, the
float-distance between values should be symmetric, so test that.
Task-number: QTBUG-88183
Change-Id: I2060eb77b1abada5b0fd5f4557dbb1761c5cfd02
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add tests for QMessageLogger class to explicitly cover all
overloads of logging methods.
Task-number: QTBUG-88183
Change-Id: I8d551f4b066cc285101646230bd9a17869ada3c1
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
