Because fonts are bigger on BlackBerry than those assumed when the test was
written, explicitly adjust the font size on this platform.
Change-Id: I6a23c28c2d32edf744dd5de09ea0a97fd5f9b6d6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Some test cases rely on the fact that show() is not fullscreen, which may not
be true for some platforms. Explicitly make use of showNormal() to avoid
full-screen show on these platforms.
Change-Id: Ie62fe21bf0f466c561a27cffda99d0201b4a45af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
There has been frequent failures with CI, especially with OSX 10.7.
These seems to work ok in CI node when ran alone but CI is running
those in parallel with some other tests, and this is causing errors,
most likely due to lost focus.
Change-Id: Ic4151099c27a4b5d91778c9b13e88d2d661e8a0d
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Keep the content aligned to the bottom when the view has been scrolled
to the bottom and the content is relayouted (for example due to
sorting).
Task-number: QTBUG-30653
Change-Id: I9513e295e276d25ff2068036cd80dbf91314fe84
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Before it would skip out a row depending on the size of the tableview.
Now it will show the next set of cells for the direction it is going in.
Change-Id: I02926d0b2187ffafffb63f7fff43c233b4d7d6af
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We cannot access children directly, since that won't ensure that
the pending sort is executed. However, the functions we need are
there already and actually makes the code nicer.
Task-number: QTBUG-29903
Change-Id: I6899284275dd79b991896a5f08486b58d95f819d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Just like other functions this function should emit expanded and
collapsed.
A part of fixing
Task-number: QTBUG-8176
Change-Id: I6d801f61e6f0cb8836634cc52f0be2b610f6c728
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we call call collapase we emit collapsed. Therefore it should
also be emitted on collapseAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: I20c1388fcbbb60d12debb4a0b3b0d9fed41e2563
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we call QTreeView::expand expanded is emitted.
For the same reason we should emit expanded on expandAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: Ie85e724eec50980c68f626ec47dec5c1e08cc085
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It can be used to determine whether expand() should really expand.
Change-Id: If79d8c295a4ca1356e60051682b227524a065126
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
A itemview item with its flags set to Qt::NoItemFlags is considered
disabled, and therefore should not cause the activated signal
to be emitted.
Task-number: QTBUG-20490
Change-Id: If824505c46f4fcadb9265ad6d1e9337f0cee32cf
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ibe8e2ec867afb4051a3c7eef806d9cd86945928b
Reviewed-by: David Faure <david.faure@kdab.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch allows single selection to be cleared with the normal
control modifier. This affects e.g QTreeView and QListView.
Task-number: QTBUG-8836
Change-Id: I7fd50b987acc3552b36657409568192763257536
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Somehow this bug managed to stay hidden until the introduction
of QFusionStyle.
Task-number: QTBUG-27675
Change-Id: I86b049b869e9f2951426dc67a485ad7c60ef1403
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
geometryengine.cpp: In member function 'void
GeometryEngine::drawCubeGeometry(QGLShaderProgram*)':
geometryengine.cpp:159:93: warning: cast to pointer from integer of
different sie [-Wint-to-pointer-cast] geometryengine.cpp:167:95:
warning: cast to pointer f rom integer ofdifferent size
[-Wint-to-pointer-cast]
benchmarking.cpp: In member function 'void TestBenchmark::multiple()':
benchmarking.cpp:85:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
benchmarking.cpp: In member function 'void TestBenchmark::series()':
benchmarking.cpp:120:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
qstandarditemmodel.cpp:2717:45: warning: unused variable 'd'
[-Wunused-variable]
qxcbconnection.cpp: In member function 'xcb_timestamp_t
QXcbConnection::getTimestamp()': qxcbconnection.cpp:930:40: warning:
suggest parentheses around assignment used as truth value
[-Wparentheses]
tst_qguiapplication.cpp: In constructor
'BlockableWindow::BlockableWindow()': tst_qguiapplication.cpp:340:9:
warning:'BlockableWindow::enters' will be initialized after [-Wreorder]
tst_qguia pplication.cpp:339:9: warning 'int BlockableWindow::leaves'
[-Wreorder] tst_qguiapplication.cpp:342:12: waring: when initialized
here [-Wreorder]
tst_qsqltablemodel.cpp:570:10: warning: unused parameter 'value'
[-Wunused-parameter]
tst_qabstractitemview.cpp:1546:8: warning: unused parameter 'index'
[-Wunused-parameter]
Change-Id: I49c88547182e4669cfde2c2536403fc5573ca2da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the sections has been resized we need to calculate new values
for the section start-positions. Otherwise we break visualIndexAt
and sectionPosition.
This fixes a regression introduced in
b800d8b94a
Change-Id: I148dbf44f742208787ed59b70d82b8048d721e90
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Get rid of QWidget-centric QMacStyle::eventFilter() and implement the
fade out animations for scrollbars using QNumberStyleAnimation-based
QFadeOutAnimation.
Change-Id: I2000fa50d46b153e981ceafc12a53932a196382e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Using
git ls-files -z | xargs -0 sed -i 's/ \+$//'
in the relevant directories.
Change-Id: I861ef9952fb32ed2db9ec8b67864ec7d0d61f0f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QItemDelegate and QDataWidgetMapper use the WRITE method on the USER
property to set a value in a widget. This did not work for QComboBox
whose USER property currentText lacked a WRITE method.
This change adds the missing setter and flags it as the WRITE method.
The setter setCurrentText() simply calls setEditText() if the combo
box is editable. Otherwise, if there is a matching text in the list,
currentIndex is set to the corresponding index.
Test included.
Follow-up to 816c554017 which restored
currentText as the USER property.
Task-number: QTBUG-26501
Change-Id: I5f2f999e60b09728ca03ead4e28fe36d1f3ee189
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is similar to the patch 05aa8c6c12
which was applied to QListView.
Task-number: QTBUG-26548
Change-Id: I38ff07230673a93a32b01a7f1951d0378d94185b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The original bug was reported as a different test failing. Looking
through the CI logs, that test now always passes, but fastScroll fails
unstably. The fastScroll test is already excluded on Mac, but the patch and
reason for that predates the public git history.
This is a regression since marking the entire test as insignificant,
and shows why insignification of tests should be as narrow as possible.
Narrow this one now.
Task-number: QTBUG-21098
Change-Id: I0d6c22e422af190c9e6331e123db38022af28e4b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
I can't find any failures in the CI logs, as reported by the bug.
Even if there is still an unstable test here, it is not appropriate
to mark the entire test as insignificant, as that hides regressions
in the entire class.
Task-number: QTBUG-23638
Change-Id: I1aeaf6e725bf28e9ac03c9330a67e51241b9272b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added ThemeHint::TabAllWidgets as a mean to access that platform
specific bool. The default implementation returns always true when
querying QPlatformTheme::themeHint().
Several auto-tests had to be updated to reflect for qt_tab_all_widgets'
type change. One XFAIL removed from tst_QApplication::focusChanged().
Task-number: QTBUG-24372
Change-Id: Ie1f0486c19898fe54c53aa4a27e378485075e512
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The solution is similar to that
in b84e180263 which affected
QSortFilterProxyModel.
Task-number: QTBUG-25370
Change-Id: I6bbb9d9786bcb2c9fa8027ab8a7cc13664784b8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The private method is called in several places in QListViewPrivate,
but before this patch, the implementation in QAbstractItemView was
called. This meant that the options were not set properly,
resulting, for example, in icons in icon mode being laid out in
list mode (on the left and small).
This is a regression resulting from
8eab9cbce2 and
3578e05b29. Other views are not
affected in a similar way.
Change-Id: I753cb99410e367266753eaf2fa43361b9212ab96
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QAIM::createIndex() took either int or quint32, but QMI::internalId()
returned qint64.
In the new interface, createIndex() takes, and internalId() provides,
integers of type quintptr.
This matches the storage size of the void* in the model index and
avoids truncation.
Remove the
createIndex(int, int, quint32) and
\obsolete createIndex(int,int,int)
overloads.
This makes a literal 0 in the third parameter ambiguous now.
The solutions have been noted in changes-5.0.0.
Change-Id: I0a0ecd8430eaf695129a4d09d14d4e30745485c4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
If you had a QTreeView with expandable items, if you tried to expand and while
the animation was still running you'd try to collpase the node,
the display would be completely broken: the items below that items would
not be visible any more except for a fraction of a second when expanding
or collapsing it again.
The problem is in the fact that when starting an animation the QTreeView
stores the state before animating. And it does that even if an animation
is already running. So the stateBeforeAnimation becomes AnimatingState and
when the animation finishes, AnimatingState is the state that is restored
breaking the painting.
Unit test is included.
Change-Id: I015212c1ed8962e6df705655099a5660f195caf3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26540
Change-Id: I1c365aeb013f5ddedd0589aa4c4844be759a3882
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
They used to always return indexes in column 0.
Change-Id: I2cf4239e0a975b37548de00a1deb916fcd88b4c7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-21804
Change-Id: I475166f3f60b1278089baa255ace4e18baeb568e
Reviewed-by: Jani Honkonen <jani.honkonen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The listitem width was calculated incorrectly because spacing was
not considered. This fixes the second part of the reported bug where
spacing is set. Added some tests to catch the issue relating to the
reported bug.
Also added a test to check spacing in general.
Task-number: QTBUG-21804
Change-Id: Icc6326bce914264d882a60a9fc0ebe7d2a08dbf6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If the selected item is scrolled with keyboard keys the selected item
will go outside the visible area. The scrolling did not take hidden
items into account when calculating the amount to be scrolled.
Task-number: QTBUG-21804
Change-Id: I63da0248cec43be464898f9dc8167e739f00ccd0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26687
Change-Id: Iaa0197efe64c61505e22e4a63a1f5c012af0bc78
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26793
Change-Id: Ic19cb6581cd5838d26713998e152772a5d12da4f
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is consistent with QAbstractButton, QCalendarWidget,
QDialogButtonBox and QGroupBox (ie, all other widgets with
a clicked signal)
Task-number: QTBUG-26105
Change-Id: Ieafe988b5c03216796b69a7cd70ac1a03fc12b0a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test has a member QWidget *topLevel which it recreates
and shows in init() without waiting for it to be exposed
although it is not used in every test case. This apparently
interferes with some tests that create separate top levels.
Do not show in init(), delete the topLevel.
Add wait to the cases where the topLevel is shown.
Change-Id: Ib428020b36dc82991d41e68478fd583bdfb004c7
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Remove usages from autotests with the exception of
widgets/kernel, widgets/widgets and widgets/graphicsview.
Change-Id: I917b2857ed0cd07a6b3dbcd69244f558086c6586
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Using qRegisterMetaType<T>() has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything.
Had to add Q_DECLARE_METATYPE to QFileInfo, for
QList<QPair<QString,QFileInfo>> of QFileSystemModel to work with
the partial specialisations of Q_DECLARE_METATYPE for QList, QPair.
In order to synchronize this change with other modules that did
their own Q_DECLARE_METATYPE(QFileInfo), a sync macro is defined
that can be tested in other modules, and will later be removed again.
Change-Id: I3004664e07e64cd885d5a03a57ff4e4379804aec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is a bigger test after this change:
c3e1abad4e
Beside the test of behavior it has the class
FastEditItemView which could be useful in the future.
QTestEventLoop::instance().enterLoop(1) does not perform well.
(IE it makes CI slower). My class could be used to extensions.
(or maybe even to remove a few of these calls)
Change-Id: I4f1460873cd07ddc482d5cfe462b59c47ebb189f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This test is nice to have regardless though the main reason for it
is a refactor of hiddenSections in QHeaderView.
Change-Id: Id41a1d5edda2ef75bf432a78cdb3e952303eae92
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In 96f1fe8855 we agreed that sections
with negative sizes did not make sense. Of the same reason default
section sizes and minimum section sizes should be not negative.
Change-Id: I6a770e7f510d8e2bb90bfd8f38b4fa0566fc137b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The dependencies on QFont, QBrush, QIcon are all in QtGui, so there's
little sense to still have these classes in QtWidgets.
This also copies and pastes a version of QWidgetItemData as
QStandardItemData inside qstandarditemmodel_p.h.
Change-Id: Ibafc5a30748e7ce0b54753309ae6dc4a797fc20e
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Defined missing SPI_GETPLATFORMTYPE macro as it was done in for example
in qwidget and qaccesiblity test cases.
Change-Id: I33a1e0119848911fbc4830299fcc1854f5259e86
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
This is a cherry-pick of b0601630dd0ddabfaa3b97d042ee02b981d95988
from February
QListView does not consider hidden rows when scrolling to an item.
If there are hidden rows (or columns) before the selected item then
the visual index of an item is not the same as the row index
from the model. So scrolling will be off by the number of hidden
rows before the selected item.
Added a autotest for this also.
Task-number: QTBUG-21115
Change-Id: I01b097bce7f163cdb480a71b763c060cc006fdc7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a cherry-pick of 4f388c383e39b598d997e21bd9a4f16d89bd0625
from February
Recursive call is caused if user code calls QtreeWidgetItem()::sortChildren and
sorting is enbled in QTreeWidget.
First call is from user code and second is caused by timer.
When timer expires second call is made.
This recursion is prevented with QTreeModel::SkipSorting skipSorting()
in QTreeWidgetItem::sortChildren();
Task-number: QTBUG-20345
Change-Id: Ibf73e69274423f31397a9e391bfba7d5c4103a3c
Reviewed-by: Markku Tapio Heikkilä <markku.heikkila@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
tst_qlistwidget::fastScroll fails if the mouse cursor happens to be
over the tested widget, because that causes an item to highlight,
resulting in unexpected region of widget to be painted. Fixed by
forcing the mouse cursor off the widget before the test.
Task-number: QTBUG-24299
Change-Id: I8f45541feda44681179d43eda67d970d5fea4e40
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
In QTreeViewPrivate::adjustViewOptionsForIndex() wrong index had been
used when referencing to array of viewItems. Variable row is set to the
index of the QModelIndex, however it is not as same as the index in
viewItems[] when there was hidden item in treeWidget. Index of viewItems[]
should be used here. Unit test is added as well.
Change-Id: Idc7eda979e7d09c5a07bd6dffd92b7abbac10e67
Task-Id: QTBUG-25333
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Similar to XCB.
Task-number: QTBUG-24299
Task-number: QTBUG-24296 (partially fixed)
Change-Id: I4c9d813d9645f957f2caad0c4e395ce0d3d222cc
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The overload of this method was renamed
in b64426248d but this one was not.
Change-Id: I60a6ddf0fcf9deea31ccf51e7b0db16c66023356
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Also remove some code which has been unused since it was introduced in
32182d107fa75e5619ecc91a81f50626f429ebe1
Task-number: QTBUG-25140
Change-Id: Ic7053d68d8200f845c1ae330342d27af7275e057
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@digia.com>
Reviewed-by: David Faure <faure@kde.org>
This doesn't fix the bug, but confirms that it is CI flakyness.
Task-number: QTBUG-21098
Change-Id: Ic37a7574af88205371f4b2c24113d12b1386835c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test used to be unstable, but has not failed for more than 400 CI
builds.
Task-number: QTBUG-23637
Change-Id: I0d92136aa9d641e447820ab19b53034f475f74da
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This is a regression introduced by commit
22b7d21186.
Task-number: QTBUG-24965
Task-number: QTBUG-25140
Change-Id: I3f3bfe23af802444b078a29ee5565dd2bd24a34d
Reviewed-by: David Faure <faure@kde.org>
This makes it easier to find insignificant tests that have no associated
bug report.
Change-Id: Ia71d59da062818d3860b0365d063e044705267fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In (SHA) b800d8b94a the span model
was replaced with a plain section model. The code however still has
variables and classes called someting with spans which would be
confusing for possible new readers of the code.
This patch cleans up most of it. It only renames classes,functions
and variables (and not any semantics or the public API).
Change-Id: I6ceb068c7317223f0d8e37f8032197f518d0174c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QComboBox does in fact have a user property
since b1b87a73012342dc1619a8e907ea9954d59ca564.
Change-Id: I24eb2ef267cec5d8a9f7348954b703fa6df04fa5
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: David Faure <faure@kde.org>
Both classes had such components before, but there were issues with
the NOTIFY signal not being in the same class as the Q_PROPERTY.
This patch solves that problem by using a signal of a different name.
Task-number: QTBUG-15731
Change-Id: Ibc7ce4dba8a6b88c05d62a90e14d0101c5cd3082
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This fixes a situation where we (wrongly) assume that
a section with size 0 is hidden. However a hidden
section should be one that we have called hideSection
(or setSectionHidden) on.
Change-Id: Ic14eded2666022f27434dc55927323a74910549c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QTreeView already does this in the exact same way. It's necessary to
call submit() so edit strategy OnRowChange in QSqlTableModel will
work as expected.
Change-Id: Ib430143e8a71f3b0bcd842fcc772cc7ee4525f0a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This patch renames the functions in Qt5 according to the
notes. It also renames resizeMode to be consistent.
The old functions are both marked with both QT_DEPRECATED
and '### Qt 6 - remove'
All usage of the function within the qtbase are also
changed to use the new functions.
Change-Id: I9e05fa41d232e9ca43b945fcc949987017f3aedd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Remove QPlatformFontDatabase::defaultFonts() returning
a hash containing widget name ->font and the Windows
implementation.
- Add enumeration and font accessor to QPlatformTheme. The value
returned for the enumeration value overwrites the default font
of the font database.
- Implement for Windows, Mac and KDE.
- Add more Windows palettes.
Task-number: QTBUG-23686
Change-Id: I8a2abdfd216df23daa7c9630c54264cdf61295db
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
It might be silly to have sections with size 0 without using hideSection.
Nevertheless we should still use the principle of least surprise.
It does not make sense that hiding a row 'far' away should affect
the semantics of setOffsetToSectionPosition on lower indexes.
Change-Id: Iaf847eba2ea4d28fc7bcfe3a27d62f432f6f61e0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This fixes a minor bug in VisualIndex triggered when calling
resizeSection with size 0 (but not hideSection).
It is mostly cosmetics - however hopefully there will soon
be a minor refactoring and there is really no need to make
strange code to keep a semantic bug.
However it is also doubtful to make a semantic change
while refactoring.
Change-Id: Ide153e421fd7a634062cb74867f4a49da4bf9cd6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In order to keep binary compatibility, Qt 4 introduced V{2,3,4}
classes for QStyleOption subclasses. They're simple, low level
containers for various members with public access (no accessors
required).
In Qt 5.0 we can break BC, so this patch moves the members
from the derived classes into the ``base'' ones.
The ``base'' ones get a version bump matching the highest
version available, and the V{2,3,4} classes become typedefs.
This change can cause problems in code that used QStyleOption
directly, especially QStyleOptionViewItem, because the old V4
fields get default initialization but the QStyle subclasses
detect that the option is a V4 option and expect all fields
to be properly initialized. The fix in such places is to
properly initialize all fields.
Task-number: QTBUG-23522
Change-Id: I2f782da09ca5cc8c4cbafc07448fb0d33153a251
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This provides a stronger mechanism e.g when inheriting QItemDelegate.
It makes some things much easier e.g avoid delete of an editor
and maybe only delete depending on what the editor says itself.
This introduces a new virtual function.
Task-number: QTBUG-2299
Change-Id: I8410f8199775987dbacffd99e4c354fdadcdd21f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a test that verifies correct behaviour of qheaderview.
It includes test of swapSections, moveSection, rowcount-change,
resizeSection, hideSection and position lookup.
Change-Id: Idc1fe8167f2d95dee5c5b1161cb633cbf9495d17
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patch removes the posibility to call resizeSection
with negative sizes.
Sections with negative sizes affect the other sections,
and it does not seem to have a useful, well-defined semantic.
The length can also become negative - and visualIndexAt
work strange.
Change-Id: I632beb160649fa10e2106314557b8c5a106aa3cf
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This allows QStandardItemModel to be usable in QML without requiring
clients to subclass it.
Task-number: QTBUG-15067
Change-Id: I867fcd8137132affdf21f37a9fa293e855a09a13
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
setSectionHidden called with (logindex, true) will
sometimes prevent a (correct) call to
resizeSection(logicalIndex, 0).
This seems a bit odd - however it does execute
d->doDelayedResizeSections().
Therefore the section is going to be hidden later.
However it is a problem that the length meanwhile is wrong.
(That is a value that is not the sum of the sections)
This is fixed by execute updates before returning the
length.
Task-number: QTBUG-14242
Change-Id: Ia1d2f6db3213792b250a6a37942b56554261cd3a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
tst_qwidget.cpp will not build/link without tst_qwidget_mac_helpers.mm,
so re-add it to the build as well.
Change-Id: I55130f62c215c4b82683d90456e31fdb09f833a8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
EditKeyPressed 4 test data fails, all other test data for the function
pass.
Task-number: QTBUG-23696
Change-Id: Ied56bd0b653ad4dcc2b6451b486aae7cad134211
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Both test data fail.
Task-number: QTBUG-23697
Change-Id: Iee4b08a88db33c72c584e326e928863af61c8dd4
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Crash was introduced by d639105759491 (pre-Qt-4.8 only)
Task-number: QTBUG-15834
Merge-request: MR-2725
(cherry picked from qt4 commit fd25323de7b5d5f3e0ffb1bd81ea4d251e071566)
Change-Id: I59959d3ba4c9bcb0d39bdbe58432817bbbfdd9f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QAbstractItemViewPrivate::renderToPixmap was not setting all the flags
that the normal QTreeView painting sets:
option.showDecorationSelected, option.viewItemPosition (so the drag pixmap
looked wrong on Windows 7, with rects around each cell), and then the
unittest also discovered that State_Children/State_Sibling wasn't set either.
Task-number: QTBUG-15834
Merge-request: 2517
(cherry picked from Qt4 commit d63910575949106f84dacf04abaa14fc866aa66b)
Change-Id: I0a5014d960543c3ed8fea73d6df578e7e521b0e0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QTRY_VERIFY waits for a condition to become true while regularly
processing events. There is no need for a custom solution to this
problem.
Change-Id: Ia65c90cbdb165b543f5c78f9bac3cfadd77dfb3f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTRY_VERIFY waits for a condition to become true while regularly
processing events. There is no need for a custom solution to this
problem.
Change-Id: Ia23e2fb61cdc5c3a3a8a729cd4356ba930fe7cb7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
So that it won't just return "Helvetica" that may not exist in
target system. Providing it seems to fix QTBUG-21833 as well,
thus we can remove the QEXPECT_FAIL statement in qlistview test.
'_' appears to reach the minimum right bearing in some fonts.
Task-number: QTBUG-21833
Change-Id: I2340af6ee736083ec4f6575e469840ebec4e545e
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
When combined with http://codereview.qt-project.org/8644, the test
crashes. This appears to be due to a column of the view being deleted
in response to calling setCurrentIndex(), as documented in QTBUG-22707.
This commit must be merged at the same time as
http://codereview.qt-project.org/8644.
Task-number: QTBUG-22707
Change-Id: I075be7df5d9196e37e2286e61d317086a76a167d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qlistview test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: I029be60c16cdff5ee3e38889d2780f1ee7d01b51
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The unreadable() test function has been disabled since before the tests
were imported into the Qt repository. The idea of the test seems valid
(though the original implementation failed to correctly create an
unreadable file), so it should be re-enabled.
Change-Id: I94634bc5785dfbfbb42ca975badaead7fe812b29
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test function has been disabled since before the tests were
imported into the Qt repository in 2006, but seems to pass today, at
least on Linux.
Change-Id: I8ff90a11a0fbb260d66b20ae735b5f21c450a5af
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed test data has been disabled since before the tests were
added to the Qt repository in June 2006, and was incomplete (the
"pattern" field was missing).
Change-Id: I974d03a4dcca76ba1a20f740372702612c8ce02b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove a couple of "#if 1" directives (but not their contents), which
have been present since before the tests were imported into the Qt
repository in 2006.
Change-Id: Id43aff37843e7a44ed96973f809de3838ba0e5b9
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was disabled in January 2007. The commit history does
not make clear what the code was supposed to achieve and the code
doesn't do what the comment at the top says (that looks like a TODO).
Best to delete it and start again.
Change-Id: I42b6b1d865c96518d74dc189a4a41d0d2776e5bc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: I80691b274d9d2abda72bca894ace9de545410ed8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Fix typos I was able to find in `tests/auto' directory.
Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I3c1d993d5682db913aadc267d98a638061f393d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
