Currently depending if user uses QApplication
or QGuiApplication we end up in different behavior
when running post routines. For example QApplication
destructor calls post routines before stopping event dispatcher,
In case of QGuiApplication post routines are called
from QCoreApplication destructor, so no more event dispatcher.
This behavior is not consistent and creates troubles
when releasing resources of web engine.
Attached test will hang on windows with QGuiApplication,
however works fine with QApplication.
Task-number: QTBUG-79864
Change-Id: Ice05e66a467feaf3ad6addfbc14973649da8065e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On the mac, the push button's bevel doesn't cover the entire widget
rectangle, but is smaller to leave space for focus frame, shadow, and
in general to meet style guidelines. Without this change, a click
anywhere inside the widget would activate the button.
QAbstractButton::hitButton can be reimplemented to limit the area in
which the button is triggered. However, getting the rectangle also
requires an addition to QStyle, so that we can query
QStyle::subElementRect for the actual area the button's bevel covers.
As a side effect, tests that use QPushButton and assume that it
responds to clicks at position 0,0 have to be fixed so that they
don't fail on mac.
Change-Id: I01b60a763bccf39090aee5b2369af300f922d226
Fixes: QTBUG-81452
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It is conceivable that during the try-compare loop of processing
windowing system events we loose and regain the focus. That would
explain the occasional test failure where instead of the expected 3
focus in events, we have received four.
Task-number: QTBUG-77769
Change-Id: I2221440d09a74d4d18a72f7786232b4491cf45a8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 56f084781e)
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is conceivable that during the try-compare loop of processing
windowing system events we loose and regain the focus. That would
explain the occasional test failure where instead of the expected 3
focus in events, we have received four.
Task-number: QTBUG-77769
Change-Id: I2221440d09a74d4d18a72f7786232b4491cf45a8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test was found crashing with software rendering in Qt 5.7.
Removing the insignification revealed that there are failures
on WinRT as well, blacklist them for the moment.
Task-number: QTBUG-78802
Fixes: QTBUG-49630
Change-Id: Ib1a3efe69d7b63cdd98c6da364ab09e0e2dbdf62
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Use the standard testlib helpers for generating clicks and port the
remaining occurrences to the new versions of
QWindowSystemInterface::handleMouseEvent(). Similarly, fix
QWindowSystemInterface::handleTabletEvent().
Task-number: QTBUG-76491
Change-Id: I6a30957164891b56a018696606956c3cab56047f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
According to Windows docs, GetMessage() function retrieves the messages
from the input queue in defined order, where posted messages are
processed ahead of input messages, even if they were posted later.
Therefore, if the application produces a posted event permanently, as
a result of processing that event, user input messages may be blocked
due to hard CPU usage by the application.
It's not a problem, if an internal Qt event loop is running. By calling
sendPostedEvents() on the beginning of processEvents(), we are sending
posted events only once per iteration. However, during execution of
the foreign loop, we should artificially lower the priority of the
WM_QT_SENDPOSTEDEVENTS message in order to enable delivery of other
input messages.
To solve the problem, it is proposed to postpone the
WM_QT_SENDPOSTEDEVENTS message until the message queue becomes empty,
as it works for the internal loop.
Task-number: QTBUG-77464
Change-Id: I8dedb6837c6fc41aa6f497e67ab2352c2b4f3772
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Otherwise, we get a warning:
QWARN : tst_NoQtEventLoop::consumeSocketEvents() QWindowsContext::windowsProc: No Qt Window found for event 0x2a3 (WM_MOUSELEAVE), hwnd=0x0x9b80646.
in the event loop which is running by another test. So, add missing
'delete' call.
Change-Id: Ib9b24155bdd6e78062a5234c317c9f878906e413
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Commit b6ded193 added an unconditional dereference
of the platformScreen pointer, for calls where nativePostion
is non-nullptr.
Change-Id: I4a6fbbd0337f91d4fcb76c17b4dc60e1b9ad10ed
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For some reason, the overload resolution of the
High DPI scale() functions introduced by
b6ded193ee chose the
wrong overloads for QPointF and/or QPoint; it fell
back to the generic template intended for qreal,
QSize, etc, ignoring the origin. Remove the
template and spell out all overloads.
Fixes: QTBUG-77255
Change-Id: I5661f16f7326f65156f646f430f5a0c71d5302d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test is failing in 5.13 for unknown reasons.
Task-number: QTBUG-72296
Task-number: QTBUG-72344
Change-Id: I24c1ad1b6def3096de99caeeebeee6e204cc75ca
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
- Use nullptr
- Fix C-style casts
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Streamline code in some cases
Change-Id: I4c9b99126cff02136def0e03accdf1129fe6d72b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The new test tst_QTouchEvent::touchOnMultipleTouchscreens()
needs the touchpoint IDs to be predictable, but another test currently
has a QEXPECT_FAIL; without release events, g_pointIdMap continued to
hold the touchpoints that were there when the test failed. So it's
necessary to add QWindowSystemInterfacePrivate::clearPointIdMap()
to be able to call it in the test cleanup function.
Fixes: QTBUG-73830
Change-Id: Ia6a70d028be95cd2b6676db6363ec408c0b116bc
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The function is setting the brushes correctly in the return value, but
without updating the resolve_mask, making it return wrong results in
functions like isBrushSet or the debug operator.
Added a unit test for the member function, since the class is still
mostly untested, and clarified the reference documentation of what the
function is supposed to do.
Change-Id: Iaa820dc44f095e125f9375cb00da5569986803c6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Windows and WinRT only have on event dispatcher class so that failing
test cases in one test will most likely also happen in the other.
Change-Id: Ib047c6870e6e02f3cf8deaaa6e438ed0ac7e2d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before commit 4d15f393a7 update requests
were handled by a timer on QWindow. Therefore they survived the closing
and re-opening of platform windows. Now, as the timer was moved to
QPlatformWindow, it gets reset when you close the QWindow, and any
pending update requests are lost. However, we do set the
updateRequestPending variable on QWindow when requesting an update.
Therefore, we can also restore the update timer on the platform window
when creating it.
Change-Id: I23b00f24a46706beac7d1455edd8a5623db46b22
Fixes: QTBUG-70957
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The matatype should not keep manually maintained list of stream
operators. The patch adds automatic detection for all builtin types
so load and save functions pick the right delegate automatically.
This change exposed some existing anomalies:
- char is enforced to be signed while it seems that just calling
the operator directly does not have that feature.
- [unsigned] long type is always upgraded to [unsigned] long long
- QCborSimpleType doesn't have the data stream operators while
metatype is able to stream it through casting
Change-Id: I51178d6acd97d0585a6089e30ddd6acb2a29af54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In openSUSE 15.0 /etc/os-release the ID of the OS was
changed from "opensuse" to "opensuse-leap". So every blacklisting
we did for opensuse, didn't cover opensuse-leap. This one adds
opensuse-leap as a blacklisted platform whenever opensuse
was blacklisted.
Task-number: QTBUG-70463
Task-number: QTBUG-51399
Change-Id: I5879eb34926757163973d8b9442eae58f47d2f11
Reviewed-by: Liang Qi <liang.qi@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
