Changed \bold to \b, \i to \e, and \o to \li.
Task-number: QTBUG-24578
Change-Id: If02517164f30f05436596224c1b1895a86d9e9f8
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This reverts commit ff25691d00.
The change broke qtdeclarative. Several autotests crash because
QHttpNetworkConnection::transparentProxy() calls proxy() on a
null socket.
Task-number: QTBUG-24717
(cherry picked from commit 849b760c90)
Change-Id: I54965ffe58e9a852200d681102af134addbb5508
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Use the pre-processor macros to detect the byte order. This is
how it is done for ARM and other platforms. Use the variant of
the macro with the most underscores to match our ARM detection.
Change-Id: I7d2b34bf45a7f3979b44a1fe2e95f678152a5dcd
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This reverts commit ff25691d00.
The change broke qtdeclarative. Several autotests crash because
QHttpNetworkConnection::transparentProxy() calls proxy() on a
null socket.
Task-number: QTBUG-24717
Change-Id: I57e3ccf5d20683f59cf7450083d1fcb3fa1c40fe
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
syncqt may generate that file also as a result of configure tests. so
just check for the file's existence instead of trying to reproduce under
which circumstances it should appear.
Change-Id: Ia24f96b05fc70e104f7be19d08cea614ffb505be
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Logic was clearly always off kilter, and this was only defined for GUI
builds
Change-Id: Ie85c156510e7c450a5192408b4c365ff07ce2029
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Parts of the auto-detection is using __BYTE_ORDER__. This
pre-processor macro was added in GCC 4.6. Document that in
the auto-detection code. Remove the misleading error message
in qsysinfo.h.
Change-Id: I66430ba1c9a1cdf476889ae6d5f3ca476243e000
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The wrong macro logic was causing iconv_open to never be
called under QNX.
Change-Id: I3367872fc8440f87fb59667770acd06262aef723
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Follow-up to d13bedb9d8
where the regexp was a bit too tight and missed many specs.
Also cleaned up QMAKE_IDC, QMAKE_RCC and QMAKE_IDL.
Change-Id: Ia15007141739019ef5ccfdda0c856c478f732b85
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
for the mouseButtons and keyboardModifiers vars and methods.
Implement queryKeyboardModifiers with a new virtual in
QPlatformIntegration.
Task-number: QTBUG-11243
Change-Id: I9e95841542ac61c73ff72d7682ad962ea8aada42
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Change-Id: Ib6640daa0fdd12f98f9d7e257c226e0abdcf31dc
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Antialiasing of fonts was causing two tests that relied on finding
at least a certain number of pixels of certain color to find one or two
too few pixels of that color and thus fail.
Fixed by increasing the amount of text displayed to make sure enough
pixels of correct color would be present.
Also removing the test insignification, as the test will now
pass completely when run under Windows Classic theme, which CI uses.
Task-number: QTBUG-24323
Change-Id: Ic0b614d33e4e4f5df18d53cb72a05db5d8b6b5e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
make is perfectly capable of doing shadow builds
Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Both tst_qimagereader.cpp and tst_qimagewriter.cpp do not depend on
QtWidgets.
Change-Id: I7e8b31c23db203c44ccb4cd4e8e747d18c5d7ed7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QWindowSystemInterfacePrivate::eventTime.start() is never called,
resulting in all calls to
QWindowSystemInterfacePrivate::eventTime.elapsed() within
qwindowsysteminterface_qpa.cpp to return 0. This could cause events
to be lost, such as mouse button press events from the evdevmouse
input plugin.
Change-Id: Iba9d23b51af80e8532d24ccf382e9077c06bb4be
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
QPointF is in the category of types for which QList
is needlessly inefficient (elements are copy-constructed
onto the heap and held through pointers). Use a vector
instead. This is consistent with the QPainter API.
Change-Id: Ie3d6647e05b40a33a7bb0598cbbcde4676e00836
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
eglfs uses the (old) OpenGL paint engine for paint operations. This drags in a
QWidget dependency and hence everything bar the kitchen sink. This change
gets eglfs buildable without widget support although anything which relies
on a QPaintDevice will end up rendering nothing to the screen. (Similar
to the QWS simplegl driver)
Change-Id: If7fcdb79038ef7568e771402fd1667bc0318ff5f
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
If SSL_MODE_RELEASE_BUFFERS is available we should tell OpenSSL
to release memory early.
http://www.openssl.org/docs/ssl/SSL_CTX_set_mode.html
Task-number: QTBUG-14985
Change-Id: Ib6656ebb3c4d67ca868b317ee83ddbf0983953f9
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Markus Goetz <markus@woboq.com>
HasIsNullMethod uses the accepted C++98 idiom to
check for members that might be inherited from
baseclasses.
The technique, however, requires inheriting from
the type-under-test, which fails for C++11 final
classes.
Fortunately, under C++11 we have much better
support for static type introspection: sfinae
for expressions. We use this here (see decltype()
use in qvariant_p.h) to write a C++11 version of
HasIsNullMethod that works with final classes, too.
However, since this technique required decltype()
support in the compiler, Q_DECL_FINAL can no longer
be used for both method and class markup. So we
declare a new Q_DECL_FINAL_CLASS which is only
set iff the compiler supports decltype(), too.
MSVC 2005 and 2008 support a non-standard, but
sufficiently compatible, version of override/final,
but no decltype(). A later patch will use MSVC
'override/'sealed' to implement Q_DECL_{OVERRIDE,FINAL}
for these compilers, but I currently don't see a
version of HasIsNullMethod that could support these
two, so the split off of Q_DECL_FINAL_CLASS is in
anticipation of that commit. If someone _does_ find
an implementation of HasIsNullMethod that works on
MSVC2005 and 2008 sealed classes, then it's a simple
matter of s/Q_DECL_FINAL_CLASS/Q_DECL_FINAL/g.
This code has been tested on GCC 4.7 (prerelease)
and GCC 4.8 (prerelease).
Change-Id: I8700c8307d79a74d45fef0aec1c6027b4a922a43
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Calling FcFontMatch should be avoided as much as possible. We can simply
cache the patterns it returns, which should still save memory compared to
loading all font engines as we did before.
Change-Id: I67208a4f919338a948535f717cfd0139dbea2e5f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
error C2039: 'move' : is not a member of 'std'
error C3861: 'move': identifier not found
Change-Id: I40beb59f893a8969275154664c947889eb570c95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
.qmake.cache is not necessarily accessible to other modules which depend on
information about whether we are cross compiling or not. We might as well
advertise this fact globally via the CONFIG variable in qconfig.pri.
Change-Id: I6dee3e6604e5ca1c775c5f9f834fe29b4e27adb8
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
this is oxymoronic: if a .qmake.cache is present, telling qmake the
project root is utterly pointless.
the windows variant never had this.
Change-Id: Iefc6e242ad7458dc699b955a3657f31f1ecf4c7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this was a somewhat magic support for sysroots, automatically rewriting
a number of path-holding variables. this was (as usual) completely
undocumented, extremely fragile, and we are coming up with something
better now anyway.
Change-Id: I045910f532cb3efc839ea81c7a48f8db695e4092
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the tool locations are now determined with qtPrepareTool(), which takes
non-installed qt builds into account already.
Change-Id: I17b2c5f4b181417f2a612be2f540768e7dc0ae4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The mask of possible mouse buttons in QNX provides tracking for the
up/down State of up to 8 mouse buttons. This update adds support
for the 5 buttons which we previously ignored in Qt on this Platform.
Task-number: QTBUG-24682
Change-Id: I8c1d2b2a5d0deb3b857fb387c242c3792e21ff95
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The test is marked as fail if qmake or make fails.
Change-Id: I565c68af4a9271d7aa36fb592ac399aa728ba4d8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Although passing a null pointer to pcre16_get_stringnumber for
the compiled pattern should simply make it error out, it's actually
an undocumented behaviour, so let's stay safe and add an explicit
check.
Tests for this codepath are added.
Change-Id: Ifd9c87874f6812ba487104ec1a5bbc83c3b16761
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE's JIT uses by default 32K on the pcre_exec caller's stack. This
is fine for most situations, but in some cases (esp. patterns with
lot of recursion) more memory is required.
Therefore, if a match execution fails due to exhausting JIT memory,
we let PCRE allocate up to 512KB to be used for the JIT's stack.
The pointer to the allocated memory is put in thread local storage
(so it can be reused from the same thread, if needed, and automatically
goes away when the thread dies).
Change-Id: Ica5fb7d517068befff88ebb198a603a26ec5d8a7
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix a typo that caused a variable to be hidden such that
the Qt::WindowFlags were not used.
Change-Id: Iea4456b0cd4c968e0fbfdd53e5006ffee0298b24
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QDialog is meant for inheritance (it contains other virtual
functions) ...
The main reason for this is that we inside the dialog
could have a (datadepened) precondition that should
prevent the dialog from being shown at all - instead we
might just want to show a messagebox.
That is not easy solvable in Qt right now. It is possible
to reimplement setVisible - but calling reject from
setVisible does not work. There seems only to be clumsy
solutions to that problem - unless these functions are
made virtual
Beside it also creates a nice symmetry to done.
Change-Id: I51c29e1f7a4a5522f5c0f71bcf98c943580790b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The comodogate 72:03:21:05:c5:0c:08:57:3d:8e:a5:30:4e:fe:e8:b0
certificate is a test certificate and the MD5 Collisions was created
as a proof of concept deliberately made to be expired at the time
of it's creation.
Task-number: QTBUG-24654
Change-Id: Ic8eb417363569fe50bf19cd229658f5e371862f7
Reviewed-by: Richard J. Moore <rich@kde.org>
