when building additional modules against an already installed qtbase,
$$[QT_INSTALL_PREFIX/get] is obviously the same as
$$[QT_INSTALL_PREFIX], so we would misdiagnose a non-prefix build.
instead, use the same condition as qt_build_config.prf (we cannot just
rely on what it sets, because in qtbase configure context it's evaluated
before we set up the paths).
Fixes: QTBUG-60541
Change-Id: I37be30e0e682ece76ed460a66f1984ee0fe2ed71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... for debugging purposes.
this needs to work in every configure run even though the options
(currently) come from qtbase's global scope. this is accomplished by
automatically injecting the test type dependencies declared in the
'builtins' scope (where they generally make no sense whatsoever, because
there are no tests there) into other scopes (the first one that has a
test of the particular type, specifically). we do that *after* the
scope's own test type deps, so it can do its custom stuff first (it can
explicitly activate the required features if it depends on some global
stuff).
Change-Id: I67317da1b55804d39458bdbcf13d39a3e57a13bf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
there is no reason whatsoever to ignore the variable if it's set to an
invalid value. also, it being empty would lead to a warning from qmake
since a while.
so instead check it for emptiness like every other variable, not for
file existence.
Change-Id: I1119f67520d2986811501cd3f223f8f4a87d067d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Don't start a new page to print a very high line of text if
that line wouldn't fit on one page in any case. In that case
we have to break the image up onto several pages anyway, so
we might as well start it immediately.
Change-Id: I823aa4961df179054476755c8f5df2e03874661f
Fixes: QTBUG-59885
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Any other method logs this here, too. This helped
to find the problem of QTBUG-71027.
Change-Id: I2d1f6199837d778ada62dac357764b0609e99692
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
in this case w->parentWidget() is not QTabBar, but QTabWidget and we
never draw PE_IndicatorTabClose control (before the recent major
re-write in qmacstyle we never tested the actual type).
Task-number: QTBUG-61092
Change-Id: I87c4813258cc2b483b2ef278c4a2f8796973af1c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Removes need to manually build up qmake command line when there's
already a Makefile generated (from a recursive qmake_all run e.g.)
Instead, just run 'make xcodeproj'.
Change-Id: Ibe91b183230721a4bcaddfde53b623df00f7adb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also affects the windowcontainer example, which includes an OpenGL
window.
Change-Id: Ic9f0f2aa66410b657e08c0225b085dd8df44e2a7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
All the delegate callbacks give us the relevant NSWindow, so we don't
need one delegate per window just to be able to resolve the correct
platform window.
Change-Id: I8e44186da63bf01f029bb0b1fefcd8880f49dda6
Fixes: QTBUG-65693
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Releasing it in [QNSWindow closeAndRelease] is wrong, as we only call
that method from a few call sites, and can easily end up with a normal
dealloc by means of e.g. the [m_nsWindow release] in ~QCocoaWindow.
This still leaves Xcode thinking we have a single leaking delegate
per active NSWindow, as it apparently doesn't realize we're calling
release manually. This needs to be investigated further.
Task-number: QTBUG-65693
Change-Id: I9105602274d8532465e5108aba2b05bf253268e9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This test was taking so much time that it regularly timed out on WinRT
and when running in qemu. Reduce it from around 40 to 7 seconds on a
powerful desktop.
Now it either runs for two full seconds for each test function or until
it has done 50 iterations.
Fixes: QTBUG-71405
Change-Id: If752c1e65d3b19009b883f64edc96d020df479d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Q_DISABLE_COPY annotates the functions as deleted but this was not
mentioned in the documentation.
As a drive-by adjust some indentations.
Change-Id: I808fe3f1ce9f949d2ba41436661569ab0f2a9f73
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
When a QScrollBar had a stylesheet the subControlRect() was not properly
mirrored which lead to a wrong scrolling behavior.
Fix it by adjusting the resulting rect with visualRect().
This reverts 00c9ec63a5 since it did not
completely fixed the issue for all use cases.
Fixes: QTBUG-27279
Fixes: QTBUG-38748
Fixes: QTBUG-40443
Change-Id: I19718287be7b4cfc9dbe6951fff99ae48264a855
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In NDKr18 Google removed GCC, most probably the massacre will not end
there and they will remove all GNU tools, so we need to start using LLVM
ones.
This patch still keeps the compatibility with GNU tools if the Qt was
built with android-g++ mkspec.
Change-Id: Ibe1979577e08ce63604d55fc5bbd5f64b3737675
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Inline images can have 4 different alignments. Unfortunately,
AlignTop and AlignBottom can only be set once we have laid out
the whole line and know the total height of the line, as one
could otherwise end up with lines that are too high.
To fix this, position the images for these cases in a second loop
after we have calculated the length of the line and the maximal
image height in that line.
Task-number: QTBUG-59310
Change-Id: I1fd4cd39e43a13d1967b9f5c9ce8270a99269cd9
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QFont, QFontMetrics, QFontMetricsF and QTextLayout constructors
use only const methods of QPaintDevice so there is no reason
for them to require a non-const pointer argument
Fixes: QTBUG-65967
Change-Id: Ibfcdef2a25f0cd4284dad76135fc4c9bf5667d7a
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Previously, the generation of this code was #ifdefed in uic itself.
However, the #ifdef should be in the generated code (anticipating
the cmake port where host and target builds might differ).
Task-number: PYSIDE-797
Change-Id: I46255f852f5f6a3d95d3a20456b6f00f2067a3fe
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
QFile::map() is documented to continue working after the QFile is
closed, so this should work for the resource file engine too.
Change-Id: I343f2beed55440a7ac0bfffd1563243a3966441f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We use std::vector and thus RAII instead of manual memory management.
std::vector (re)allocates only if needed, growing exponentially,
initializing only new elements. std::vector<>::resize also makes
initialization loop redundant
Task-number: QTBUG-71156
Change-Id: I253bb428c0fb641872f0f7f2dcfe1f9e89db0296
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Because of the system specific folder/filenames (organization
name vs domain) it was not possible to explicitly access the
settings with SystemScope without using #ifdef, as it is done
by Qt internally. The new constructor uses the default name
while creating an instance with a scope.
[ChangeLog][QtCore][QSettings] Added QSettings(Scope...)
constructor to avoid using #ifdef in Qt applications.
Change-Id: I81016430a1d18a382bfdd1e1cf32de367f98d7aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This was added to RGB64 rendering because pixel conversions could be
expensive, but when painting to non-standard imageformats, the same
can also be expensive in the generic 32-bit backend, and thus benefit
from the optimization as well.
Change-Id: I747a398670b1d4dbd844a772e7aafce3c8dbef20
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] Introduced the variables
WINDOWS_TARGET_PLATFORM_VERSION and
WINDOWS_TARGET_PLATFORM_MIN_VERSION for overriding the default values
of WindowsTargetPlatformVersion and WindowsTargetPlatformMinVersion in
Visual Studio project files.
The code to determine the default values is moved to qmake feature
files. A common/windows-desktop.conf file is introduced for variables
common to all non-UWP Windows mkspecs.
The package_manifest feature uses WINDOWS_TARGET_PLATFORM_VERSION as
default value for WINRT_MANIFEST.minVersion, and
WINDOWS_TARGET_PLATFORM_MIN_VERSION for
WINRT_MANIFEST.maxVersionTested respectively.
Task-number: QTBUG-53654
Change-Id: I251ec7f9b804c9bc9f7d571f5b43d52b2a2d99d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We have linked against Crypt32 for a while.
Change-Id: I7ec9401a63d7405e4b5357d6589501e997e31aca
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Moving it to a separate routine like blendTexture, so DrawHelper only
has solid color routines, and generalizing the vertical gradient
optimization.
Change-Id: I54bd59eba7e95247b9a365a3738d02c4f8cc2631
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Macro parameters should always be enclosed in braces when used.
Plain C strings passed in parantheses are interpreted as
const char[], at least by clang-tidy.
Implicitly decaying arrays into pointers should be avoided and
clang-tidy warns about this. Avoid both problems by always static
casting all messages to const char *.
Change-Id: I2be668169bec2823f69af3aa75086a31b0b31938
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise they might end up as const char[], which clang-tidy complains
about because it implicitly decays into a pointer when passed to the
QMessageLogger ctor.
Change-Id: I0d223f0c94cb63be6fc2a165348f143fadaf11ea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This issue was caused by the workaround added to fix QTBUG-70887.
Certain events like the initial touch down do not generate mouse
messages after the pointer messages (but only touch messages) and
should not be postponed by the pointer handler.
Fixes: QTBUG-71775
Change-Id: I7b64ae4d422f6a4c1bb465ce5f8255e85640dab1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Otherwise we can hit issues when other versions are included, as
ptrdiff_t while having the same length is not the same type as signed
long long on MSVC.
Change-Id: Id42049b1052e528a663125ee5426b068ee46db72
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It was just caching a pointer only used one other place where it could
be looked up.
Change-Id: I3a3455f467f8a107d24b208c8591e7c9725c3389
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This change fixes building Qt with the -no-feature-tabletevent configure
option by disabling handling of pointer messages associated with tablet
events within the pointer message handler.
Fixes: QTBUG-71774
Change-Id: Icb47a39793edb9a0f87c07c656b6ea6573d5f947
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
