Qt Quarterly 31 was the last edition of Qt Quarterly to be
published exclusively as a PDF. We cannot fix the typo in the
PDF. As the content is >10 years old an in an unmaintained
archive section, remove the reference to it from this example.
Fixes: QTBUG-81972
Change-Id: I41a82487ff89dbe8ea5701c02c51e7f7c79bf73d
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
What I originally thought NLM_CONNECTIVITY_IPV*_SUBNET meant turns out
to be what NLM_CONNECTIVITY_IPV*_LOCALNETWORK is, leaving me to wonder
when *_SUBNET is actually used. Anyway we now also check *_LOCALNETWORK
to make sure we're not unnecessarily denying certain connections to be
made.
At the same time check for link-local connections where both local and
remote are link-local, in this case even NLM_CONNECTIVITY_IPV*_NOTRAFFIC
is valid. Unfortunately this check cannot be done in
QNetworkStatusMonitor, so QNAM will likely not allow these connections.
Task-number: QTBUG-80947
Change-Id: Ieb96ce9f4a478eef0c3ea47f2471f701c102b4d4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This makes no difference for the IA-64 C++ ABI nor for MSVC until MSVC
2019 16.6. But it does with 16.6, where the std::atomic constructor
becomes non-trivial, which makes QtPrivate::RefCount non-trivial, which
makes QLinkedListData non-trivial.
Before this change:
User code \ Qt MSVC <=16.5 MSVC >=16.6
MSVC <=16.5 works works
MSVC >=16.6 fails works
With this change, they should all work. The list of symbols exported
should not change either, so linking against a Qt compiled with MSVC
<=16.5 should continue to work.
[ChangeLog][MSVC] Fixed a compatibility issue found when linking code
compiled with version 16.6 to a Qt compiled with 16.5.
Fixes: QTBUG-81727
Change-Id: If79a52e476594446baccfffd15ee771397467f8b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Apple changed on macOS 10.14 (Mojave). Windows has always allowed.
Fixes: QTBUG-81905
Change-Id: I572733186b73423b89e5fffd15f12fee3f03c055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The comment in QNativeSocketEnginePrivate::fetchConnectionParameters()
talked about IPv6 v4-mapped addresses. However, toIPv4Address also
converts the unspecified address (::), which resulted in QAbstractSocket
saying that it had bound to QHostAddress::Any instead of
QHostAddress::AnyV6
Change-Id: I572733186b73423b89e5fffd15f138579c5c0c50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change b274f656b8 enabled the use of a
response file for application building specifically needed when building
an application for Android on Windows. The same cause can happen when
building a library too with a lot of object files, so the command for
the link step can be too long. So we expand the functionality to be
used for libraries too.
Task-number: QTBUG-71940
Change-Id: Ia6d1943bf33f6decb53f6e71a8dc65310d2f20a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We don't have a -relocatable configure switch. Move the documentation to
the right place (configure -list-features).
The correct configure switches to turn the feature on/off are
-feature-relocatable and -no-feature-relocatable.
Task-number: QTBUG-80928
Change-Id: I96df0f44f12b2efe5a64132e9006d4b73de41255
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tasuku Suzuki <tasuku.suzuki@kdab.com>
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
In a case where a connection is refused, then it is possible for it to
fail at the time that the QHttpNetworkReply is being created and
therefore after the connections have been made it would have already
emitted the signal to indicate it was finished with an error.
To account for this, then it checks if there is an error code set on
the reply and if there is then it will call the relevant slot right away.
Fixes: QTBUG-57799
Change-Id: I4e73e5c82092c09f825343d18db40b47c3cdb9ac
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Menu items with submenus should implement the Expand/Collapse UI Automation
pattern in order to allow screen readers to say whether they are expandable
items.
Fixes: QTBUG-80550
Change-Id: I4f72d30172f76f028be5cbdeb1fd85fca6b07acf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
filterAcceptsColumn always returns true unconditionally and must be
reimplemented (overridden) by user code to achieve the described
behavior. Change the documentation to reflect this fact.
Fixes: QTBUG-81654
Change-Id: I0dade63294598238d2ad54ab251b4c1b27c72cdf
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Failing to tag the image results in costly CPU-based color-space
conversions.
Change-Id: Ib65547f4b99b83e10d3603c27388f50eb4d3840c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's needed when ANDROID_NDK_HOME is not set
Fixes: QTBUG-81978
Change-Id: Id6108083ae62757ca839d652793d98a89e6cb6b5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The second parameter of replace is a regex, therefore trying to replace strings like
"plugins/sensors/libplugins_sensors_qtsensors_android.so" will result to super strange
results.
Fixes: QTBUG-81974
Change-Id: I887e70f4fd8fa2af482a60f63af371f954b56ce1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since Android will place the created qrc files in their own architecture
then we need to make sure that we account for this when returning a list
of all the resources. This is so that when other files are created that
depend on this list, it is able to find them.
Fixes: QTBUG-81477
Change-Id: I4a083c1c5c3e0aec35649cf7f5419cf3c6a75eae
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add an event loop to wait for user file selection in native fileDialog
Task-number: QTBUG-77214
Change-Id: I3d97d6c3f46cf2a8ed0ee6f98e555e8d62e12cc3
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
On systems with very simple boot sequences, the kernel will create a
device called /dev/root and use that to mount the root filesystem.
However, that doesn't actually exist in /dev and could cause
confusion. So we try to resolve using /dev/block if the /dev entry does
not exist but udev is in use (udevd has the string "/dev/%s/%u:%u").
[ChangeLog][QtCore][QStorageInfo] Improved discovery of device nodes on
Linux if the /dev entry was renamed after the filesystem was mounted and
udev is in use.
Fixes: QTBUG-81464
Change-Id: If79a52e476594446baccfffd15eec573ae3deb0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were a few surprises:
- QByteArray::compare() are missing noexcept (will add)
- ibid., called with non-ascii content and CaseInsensitive fails
(this was discussed on the ML, with tentative agreement that
it's a feature, not a bug; waiting for QUtf8String(View) for a
fix, then).
- As was the case when we did this exercise with the relational
operators, QString(Ref)/QChar is not noexcept (will fix)
These have been QEXPECT_FAIL'ed.
Not much of the cartesian product is implemented at all, yet. These
have been #ifdef'ed with NOT_YET_IMPLEMENTED to see what's still
missing.
Change-Id: I7d9b21e292b98f980aacdc6248e88188f7472ba2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The font change in QComboBox might cause incorrect appearance of popup
menu since it doesn't notify popup menu to relayout itself
Fixes the issue by send font change event to the item view of popup
menu when received a font change event in QComboBox
Fixes: QTBUG-75846
Change-Id: I4821015cca95a7e233a22262596a6fbf27f10aef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When a QPushButton has an icon, text and menu, the text is truncated. In
RTL mode the menu indicator is also drawn on the wrong side.
Fixes: QTBUG-81784
Change-Id: I27ecb67d12c68ac939540f0f836b2e2875706b4b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As discussed in the bug report, making sure that the reference counts
are correct in such scenarios adds substantial complexity to the code,
only to support a bad use-case for which QStandardItemModel was not
designed.
Change-Id: I663b490ed3471875386add17e7eadb7d8df50489
Fixes: QTBUG-78142
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Since the patches applied previously are no longer required, we have
removed those too.
[ChangeLog][QtSQL][sqlite] Updated to v3.31.1
Change-Id: Ia80c31683a8cf92cfd114b6da32460ddcf38d502
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Those types are used as properties of Q(Date)TimeEdit,
QKeySequenceEdit.
Fixes: PYSIDE-1215
Change-Id: I8b9ffebb8229fff447aa7dd6bee6e037d708333c
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This way we produce valid xml also for the no-proxy case.
Change-Id: I5a277255d22c3814fe463c0cd013c04ddc6ad919
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Unregister the ActivityResultListener() after the result is handled.
Fixes: QTBUG-78912
Change-Id: Ia2b45eca002e854492c409c70a3876fa8ce98de1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
"" it's the root folder of the assets, setting m_fileName = "" will make
AndroidAbstractFileEngine::setFileName to fail and it will not set the
proper flags.
Fixes: QTBUG-81535
Change-Id: I0653f83b55ee790c8edf188889ccb30ef54584c0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When QWidget is being destroyed, its winId is cleared, and
a QEvent::WinIdChange is sent. If a listener of this event
reacted by calling winId() again, we might crash.
A crash can be observed when this child widget is destroyed in dtor of its parent.
E.g. here is a hierarchy of widgets:
1:QWidget
2:QObject
3:QWidget
4:QWidget
If a listener subscribed for WinIdChange events from (4),
and there is a connection to destroy (4) when (2) is destroyed.
This will lead to infinite loop:
1. QWidget::~QWidget
2. QWidget::destroy
3. QWidgetPrivate::setWinId(0)
4. QCoreApplication::sendEvent(q, QEvent::WinIdChange);
5. eventFilter
6. QWidget::winId
7. QWidgetPrivate::createWinId (this=0x555555957600) at kernel/qwidget.cpp:2380
8. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
9. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
10. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
11. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
12. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
Fixes: QTBUG-81849
Change-Id: Ib4c33ac97d9a79c701431ae107bddfb22720ba0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Our ALPN-related definitions were conditioned both on OPENSSL_NO_NEXTPROTONEG
and OpenSSL version (since ALPN first was introduced in 1.0.2), but
resolving was only under version check, not OPENSSL_NO_NEXTPROTONEG.
This went unnoticed for many years, and was found only recently with
OpenSSL built with no-nexprotoneg.
Fixes: QTBUG-81762
Change-Id: I7afca0b2034a234a19b5bcdefd3ce26f4202cddb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
While the single-line-case format is more readable when consistently
applied through the whole switch, it works less well when several of
the cases are too complex to fit on a single line.
Change-Id: I6a84a3d3d1493dadddab103da0336a8ef860563c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Back-ends need to catch NULL data so as not to call system APIs with
invalid pointers.
[ChangeLog][QtCore][QCollator] Fixed a regression introduced in 5.14.0
that caused QCollator not to operate with default-constructed QStrings
and print a warning on Windows.
Fixes: QTBUG-81673
Change-Id: I2eafe1e188b436afcca3cf2ecdf98bba707c44c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having a QtCore build optimized for AVX2 does not imply all user
binaries and libraries are optimized the same way. Most of them will
actually have been built for the base platform, which means they require
access to these tables to operate if they are using qfloat16.
Introduced by 5e40d3d982.
Change-Id: If79a52e476594446baccfffd15ee2da9e3693cce
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
On macOS it's possible to configure the system locale to not do digit
grouping (separating "thousands", in most western locales); it then
returns an empty string when asked for the grouping character, which
QLocale's system-configuration then ignored, falling back on using the
base UI locale's grouping separator. This could lead to the same
separator being used for decimal and grouping, which should never
happen, least of all when configured to not group at all.
In order to notice when this happens, query() must take care to return
an empty QString (as a QVariant, which is then non-null) when it *has*
a value for the locale property, and that value is empty, as opposed
to a null QVariant when it doesn't find a configured value. The caller
can then distinguish the two cases.
Furthermore, the group and decimal separators need to be distinct, so
we need to take care to avoid cases where the system overrides one
with what the CLDR has given for the other and doesn't over-ride that
other.
Only presently implemented for macOS and MS-Win, since the (other)
Unix implementation of the system locale returns single QChar values
for the numeric tokens - see QTBUG-69324, QTBUG-81053.
Fixes: QTBUG-80459
Change-Id: Ic3fbb0fb86e974604a60781378b09abc13bab15d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
MS's documentation says empty means "+" here, so implement that
fallback (which shall over-ride whatever the CLDR has given us for the
fallbackUiLanguage's positive sign).
Task-number: QTBUG-81530
Change-Id: Ic3f10dd061d0c46d1433f29b8065988da94c38e6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An empty string, when packaged as a QVariant, is non-null (as a
QVariant); and QSystemLocale::query()'s callers care about the
difference.
Some callers of the internal getLocaleInfo(LCTYPE type, int maxlen)
need an actual QString return, while others are what query() returns,
so need to return a QVariant; where the former want an empty string,
the latter need a null QVariant. So make that getLocaleInfo() into a
template, so callers can chose QString or QVariant as return type,
only affecting the failure returns.
Change-Id: I7b9a698badedc0e0d8aef8c6e85c22931c33297a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The "title" in markdown is the tooltip, not the name attribute of
a link. Also, tell the char format that it's an anchor.
Change-Id: I2978848ec6705fe16376d6fe17f31007cce4b801
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Given we feed UTF-8 data into the importer, it must be able to cope
with Unicode. Build md4c with UTF-8 support, advertise it at
usage site, and change a couple of broken decodings.
Driveby: the textedit example used the wrong codec to decode
a Markdown file. While the Markdown spec doesn't deal with encodings,
using the default one for HTML is certainly wrong. Port the loading
of both markdown and plaintext to UTF-8, as that what _saving_
via QTextDocumentWriter would use by default.
Change-Id: I51c6214cfe45ebfc5a67a7366f7866a5328366ec
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reaching a certain number of characters, OutputDebugString will just eat
the string and not give any output. As there is no way of handling that
error properly we divide the string into usable chunks.
Fixes: QTBUG-80996
Change-Id: Ic7ef34c48c212cbaec3a03790d1020506b7b4319
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Fix a small typo in the link to vcredist.exe
Change-Id: I8b2724bd01889ac439bcd1a762a7c74df9882492
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
It appears __ARM_FP16_FORMAT_IEEE is sometimes incorrectly set, and
we need to double-check that 16-bit floating point is available in the
__ARM_FP macro as well.
Task-number: QTBUG-68314
Fixes: QTBUG-81461
Change-Id: I878d6b286aa31e21271163dc6c8f8038b9534c76
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They're value types, so pass them as such.
Change-Id: I0dc46c63a3a0e6d859b821362f71390f0148b64c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
