It is part of a solution to produce notarizable binaries for
application using Qt WebEngine.
Pick-to: 6.6 6.5
Task-number: QTBUG-99555
Change-Id: Ice0bbcfb12829906328f55158b0c37f03878f17c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Unsetting CMAKE_STRIP and including CMakeFindBinUtils to find it again
is not safe, because CMakeFindBinUtils has logic to search for
additional tool names depending on the currently processed language.
The currently processed language is set in _CMAKE_PROCESSING_LANGUAGE
only when CMake is doing it's language introspection via
CMakeCXXCompiler.cmake.
This resulted in the build system finding a regular host-OS strip,
rather than an android specific llvm-strip when doing an Android
build, which then silently failed to strip the Android libraries
and caused us to ship big binaries.
Improve the strip wrapper creation in a few ways:
- Save the original strip value on first configuration
- Restore it if needed, without using CMakeFindBinUtils
- Don't apply the strip wrapper creation logic to Android,
we currently don't need it there
- Add some informational messages about which CMAKE_STRIP
ends up being used even if log-level is not DEBUG
- Fix a typo
Amends 39f657032b
Pick-to: 6.2 6.3
Fixes: QTBUG-103356
Task-number: QTBUG-101653
Change-Id: I23d98180446d5bb7628e783668f46e4e546ed700
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Fix binary_for_strip project not being found when the following
conditions were met:
- building a repo other than qtbase
- qtbase sources are not available on the machine
(usually happens in CI where only the current repo sources are
available).
The issue was that QT_CMAKE_DIR would always be defined, regardless of
which repo was being built and the system would incorrectly assume
the location of the project files.
The fix is to always pick up the sources from qtbase's source dir if
they are available (this time done with an appropriate check),
otherwise use the installed files.
Note that the behavior of always using the qtbase sources if available
is not exactly the best, but it is a more general issue that affects
other code too.
In the name of consistency, make it so for the binary_for_strip
project as well, but add TODOs in code to address the situation
in a separate change.
Amends 39f657032b
Pick-to: 6.2 6.3
Fixes: QTBUG-102064
Task-number: QTBUG-88090
Task-number: QTBUG-101653
Change-Id: I0649f945e9ff0ab1f597c51bb5ab389fa665c021
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
MinGW 11.2.0 comes with a strip.exe that strips the ".gnu_debuglink"
section in binaries, a section that is needed for the separate debug
information feature.
binutils version 2.34 mentions the feature for the first time:
https://sourceware.org/binutils/docs-2.34/binutils/strip.html#strip
To ensure the debuglink section is preserved, generate a shell wrapper
that calls the original strip binary with an extra option to keep the
required section.
To determine if the option is supported, we build a real shared library
on which strip will be called with the --keep-section option.
If the option is not supported, a wrapper is not generated and the
stock strip binary is used.
This logic only applies when targeting Linux and MinGW + a shared
library Qt. For other targets, the stock strip binary is used.
Developers can opt out of this logic by passing
-DQT_NO_STRIP_WRAPPER=TRUE when configuring each Qt repo.
Pick-to: 6.2 6.3
Fixes: QTBUG-101653
Change-Id: Idd213d48d087d3c9600c853362aebaba348cde33
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Use VERBATIM option to prepare the correct command line for the
add_custom_command. This especially sensitive when using build
directories with names containing special symbols, that cannot be
handled by shell correctly.
Change-Id: I51d7041cb806411135fd59bf6273c04a3c695443
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Debug tools are excluded from the ALL target for debug_and_release
builds. However, when using the -separate-debug-info option, the same
exclusion wasn't being applied for their dSYM INSTALL commands,
resulting in a CMake install error.
Pass any additional install args like
EXCLUDE_FROM_ALL COMPONENT "ExcludedExecutables"
to the installation rules of qt_enable_separate_debug_info and
install dSYMs for executables per-config in a multi-config build.
All the non-main config executable install rules are optional because
the non-main config executables are excluded from ALL.
Amends 5b136abd21
Pick-to: 6.2
Fixes: QTBUG-93999
Change-Id: I95c3ce28215c3ee535551e4b7a5fa9731f8f1c28
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For Apple's frameworks it's possible to include header files using the
following assumption:
If the framework name is "MyFramework" then
'#include <MyFramework/frameworkheader.h>' will work without specifying
the include path explicitly. This is broken for internal modules since
they use the framework name with the 'Private' suffix.
This uses the module name instead of the target name as a framework
name.
Amends edbe0eb335
Task-number: QTBUG-87775
Change-Id: I0592a28d0768724b6e10ca81aa7cefb0a3699a5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now all shared libraries and executables will get .debug files on
the platforms that support FEATURE_separate_debug_info
With the directory property _qt_skip_separate_debug_info certain
targets can retain the debug symbols in the binary e.g. lupdate with
MinGW 8.1.0 will cause objcopy / strip to fail.
Fixes: QTBUG-87015
Change-Id: I03b106e68ef0a42011d1ba641e6f686b2e7b7fb4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Once we can require CMake 3.17 everywhere, we can remove the variable
set up from QtSeparateDebugInfo.cmake.
Change-Id: I91572583654054f5fa47ac1e41be23050a5a8c0b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For this, we have to uninline the separate_debug_info configure test,
because supporting the conversion of this in configurejson2cmake is not
worth the hassle.
Separate debug information can be turned on for a target by calling the
function qt_enable_separate_debug_info. For Qt's shared libraries and
tools separate debug information is generated if the
'separate_debug_info' feature is manually turned on.
Change-Id: Ic2ffc15efef3794dc0aa42f3d853ef6d651a751c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
