When a popup is opened it grabs the input, but the leave event to the other
windows needs to be sent.
Remove the popupEnterLeave test as it did not test any code. The Popup
never gets any enter or leave events so it will succeed always succeed
Task-number: QTBUG-36862
Change-Id: I625c616eeb74b5168af7b751485e2a9a53b76cd3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
customMenuFont was null, so objects was an empty array, and
NSDictionary throws an exception when being called with arrays
of different sizes.
Task-number: QTBUG-42728
Change-Id: I8cdab449fd8c1d12b65c46dd5617a7f5e3e96c6e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
When the QWidgetWindow receives a resize or move event, it should check
with the widget if its crect already has this geometry. if not then send
the resize or move event
Ideally events should be sent whenever the QWidgetWindow receives them.
QTBUG-42383 is created for this problem
Task-number: QTBUG-29937
Task-number: QTBUG-38768
Task-number: QTBUG-30744
Change-Id: I1e9a5d25de29a98885edece927ba14d7a763eb01
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Fix warning:
void QWindow::setTransientParent(QWindow*) ... must be a top level window.
which occurred for example when parenting a QMenu onto a native child
widget.
Task-number: QTBUG-41898
Change-Id: Icc25fb2108bd68b2d9c0e551949b90fc7a82d358
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
ASAN report:
READ of size 8 at 0x606000011990 thread T0
#0 0x505e3b in EnterTestMainDialog::eventFilter(QObject*, QEvent*) tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10294
[...]
0x606000011990 is located 48 bytes inside of 56-byte region [0x606000011960,0x606000011998)
freed by thread T0 here:
#0 0x2b8df3551c79 in operator delete(void*) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:92
#1 0x418ab5 in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10276
previously allocated by thread T0 here:
#0 0x2b8df3551739 in operator new(unsigned long) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:60
#1 0x4188cf in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10272
EnterTestMainDialog::eventFilter() checks for nullness of 'modal'
before accessing it, but buttonPressed() did not reset 'modal'
to nullptr after deletion.
Change-Id: I65562a29f8264a6996d7d615e06de1d1afb5af53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fixes a regression against Qt 4, where Show/Hide events were received
when the minimized state changed.
It is restricted to QWidget so as not to introduce additional events
to QWindow (which already has signal visibilityChanged()) and cause
unexpected side effects in QQuickWindow.
Task-number: QTBUG-41312
Change-Id: Ib165a5daf7a7e5d8231ef8a94b70e8a2a3253057
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When a window's screen changes it may recreate the platform window.
In that case, update the winId in the widget to keep it in sync.
Task-number: QTBUG-40681
Change-Id: Iec815320214832bb63952de3a5bd1340a04dacd4
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Widgets and layouts added or inserted to a layout are checked for:
- Not being NULL
- Not being the parent widget of a layout or the layout itself,
respectively
Without this commit, adding a widget to its own layout would result in a
CPU-hogging infinite loop. Now, a warning is written to stderr and the
add or insert function call is ignored.
The checks are implemented as public functions of QLayoutPrivate and
thus accessible in QLayout's descendants to be used in various
"addWidget", "insertWidget", etc functions.
Unlike 'classical' layouts like QGridLayout, QFormLayout does indeed
accept widgets that are NULL. To not break this behavior, any call for
the check functions first tests if the widget or layout, respectively,
to test is NULL or not and calls the check only in the latter case.
Automated tests for QBoxLayout, QGridLayout, and QFormLayout were added.
For an unpatched Qt 5.3, each of those automated tests will freeze as
explained in QTBUG-40609. For a fixed version, warning messages about
invalid parameters to addWidget/addLayout/... calls will be read by
QTest::ignoreMessage, resulting in a passed test.
Change-Id: I1522d5727e643da3f7c025755975aca9f482676d
Task-number: QTBUG-40609
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When setting a new screen, the code calls QWindow::destroy(), which
recursively destroys all child windows. It then calls create() on the
top-level window, leaving child windows destroyed. This causes crashes
if you have embedded native widgets.
Task-number: QTBUG-40817
Change-Id: Iaace2589f48bbfd5faaf5ff95357ff43b310504a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The QPanGesture recognizer requires single-point touch events. The touch
implementation in Qt 4 would test Qt::WA_TouchPadAcceptSingleTouchEvents
and forward single touch events if set.
Making this work in Qt 5 is a little bit more involved since the platform
plugins don't know about widgets.
Change the Cocoa touch implementation to send single-point touch events
to QWidgetWindow windows only. Make QApplication forward single-point
touch events only if the target widget has the
Qt::WA_TouchPadAcceptSingleTouchEvents attribute set.
Task-number: QTBUG-35893
Change-Id: I68712a5e3efb4ece7a81ca42f49c412e525eeb3a
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Everything else passes, after some pending fixes in QtWayland.
Change-Id: Ibd8efcaab8c5210111854f1a7362434046a62898
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
So when they fail it's easier to figure out why.
Change-Id: I7e76a6e0b8076ede30a6bb9049a031063c569dfc
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Use sizes relative to the test widget size; move windows relative
to the top left point of the available screen geometry. Set a window
title on widgets to be able to identify them. The test now
passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: I5df9198e390befeb3ca18796e24180135a084aad
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Fix tests widgets leaking widgets and ensure it stays
that way by adding a check to cleanup().
Task-number: QTBUG-38858
Change-Id: I77a81d823c68cf0b4e51c2da55b1c473d6e4170b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fixed qwidget test cases for platforms that show windows full screen by
default and that don't support WindowMasks. Incorporated QNX/BlackBerry
peculiarities.
Change-Id: I349ecab5cef35c7d9751aa547465f685d620164a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
This reverts commit a1c5198387.
The idea of detecting non-spontaneous events by comparing
against the widget's crect has problems when sequences
of programmatic resizes occur. In addition, QWindowSystemInterface's
queueing of events is problematic for this.
Task-number: QTBUG-39611
Task-number: QTBUG-32590
Change-Id: I4674d8d5d5d432d938f7226b5790543335665c1f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
It is NOT always the same as isEnabled().
Added a unittest to prove it.
Change-Id: I7717126835923e8c091249bfcdf81767c44fb5f7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QWidget::resize() or QWidget::move() set the new size/position values
and send events. The spontaneous events generated by the platform
should be ignored in that case.
Task-number: QTBUG-30744
Task-number: QTBUG-38768
Task-number: QTBUG-32590
Change-Id: I9c0ae38842ed76a8a88ca64fdc9bbe106b2766b7
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
QEXPECT_FAIL followed by QTRY_COMPARE considerably slows down
tests due to the check timing out.
Task-number: QTBUG-38890
Change-Id: I7f90f2627fc6ce149d159a6d13355ca1a8181d54
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
One issue was that the text of a QPushButton would stretch the widget if the
platform font is to big. The other issue was that the autotest did not expect
that show might translate to a showFullScreen on some platforms.
Change-Id: I3a9903979d766d04c402fda309d0492cfa506ed6
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
When a child of a widget is spontaneously revealed due to a call to
the parent 'resize' method, the child will not receive a paint event
if it has the WA_StaticContents and WA_OpaquePaintEvent flags set.
This is caused by the backing store being pre-emptively resized by the
call to setGeometry_sys, which causes QWidgetBackingStore::sync to skip
the block which handles the static contents.
There doesn't appear to be any reason to preemptively resize the backing
store, since it is always resized as-needed during the the 'sync' method.
This change-set removes the code which preemptively resizes the backing
store.
Task-number: QTBUG-35282
Change-Id: Ie9942854ca5322dfe0f98ed8100810161576be80
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
[ChangeLog][QtGui][QWindow]QWindow::icon() now defaults to the application
icon, which can be set with QGuiApplication::setWindowIcon().
Change-Id: Id1974e5cda81775e515c14b294f67fb99351c6c9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
QScreen::grabWindow() is not always reliable because it grabs from the
framebuffer. (The window might then be covered by other windows, e.g.
"Stays on top"-Windows, popups etc).
If QScreen::grabWindow() fails we therefore fallback to
QWidget::grab(). This will not grab from the frame buffer, but it will
ask the widget to render itself (with its current state) to a pixmap
and return it.
QWidget::grab() should usually return the expected pixmap, and the
pixmap it gives is not subject to the state of the window manager.
This means that both QScreen::grabWindow() *and* QWidget::grab()
must produce an unexpected pixmap in order for the test to fail.
Change-Id: I276554155bb1e5b510d2a2d43628d91669464fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change childWidget->windowHandle() to childWidget->internalWinId() in
q_createNativeChildrenAndSetParent() to determine whether should we call
childWidget->winId().
This is because in some circumstances Qt will crash due to accessing
deleted QWidgetWindow object if we use windowHandle(). Think about the
following scenario:
1) create a widget A without parent and add two child widgets B and C to A
2) create a native widget D as the child of B, note that when we set
Qt::WA_NativeWindow attribute to it, its QWidgetWindow will be created
which means its windowHandle() is not null.
3) create a top level widget E as the child of C and show it. This will
make Qt call createWinId() to A and then
q_createNativeChildrenAndSetParent() will be called to create A's native
children recursively and finally make D's QWidgetWindow object become a
child of A's QWidgetWindow object. Please note here that B will not become
a native widget just because at that moment windowHandle() of D is not
null and Qt will not call winId() to its parent B
4) Set A's parent to another widget which has been shown, setParent_sys()
will be called to A and then Qt will call destroy() to A. in destroy() Qt
will try to call destroy() to its children recursively with a condition that
the child has Qt::WA_NativeWindow been set. But D's parent B is not a native
widget right now so B and D is not destroyed. Qt will then deleted the
QWidgetWindow object of A, since E's QWidgetWindow object is a child of
A's QWidgetWindow object, it will also be deleted. Now E hold a deleted
pointer of QWidgetWindow object. This is the source of crash later.
Task-number: QTBUG-35600
Change-Id: I97a20a68e626ee62b15bb4eae580e26f8948923b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Brings Windows QPA on par with other platforms.
[ChangeLog][Windows] Don't cover the taskbar when maximizing
frameless windows.
Task-number: QTBUG-8361
Change-Id: Iba35132f697cb7379650a4c883b616c5c2023d4c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Tweak a handful of tests which didn't compile on this platform.
Change-Id: I208d9eb289dfb226746c6d0163c3ea752485033b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Qt::WA_Mapped maps (sic) to windowHandle()->isExposed(), and we set/update
it in QWidgetWindow::handleExposeEvent(). Setting it directly in show_sys
shortcuts QPA and assumes showing a window is synchronous on all platforms,
resulting in trying to flush the widget backingstore when the window was
not exposed yet (due to discardSyncRequest starting to return false).
This reverts commit 829b1d13b2.
Change-Id: I0bd700d4939bc69ba184d8586435b68ec3dd72fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The dockwidget's toplevel window would be a parent of the container's
window when floating. When plugged back into the mainwindow the
dockwidget's window is destroyed and the container's window along
with it. Added a function toplevelAboutToBeDestroyed to unparent
the containers window before this happens so parentWasChanged will
work correctly.
Change-Id: I06679cfb3a8fa3834c0db0be5973c012b8277275
Reviewed-by: Ulf Hermann <ulf.hermann@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
When clicking on a widget currently focused, w/o having Qt::ClickFocus
set as focus policy, the focus should stay on the widget and not get
propagated to the widget's parent.
Task-number: QTBUG-34042
Change-Id: I53f1153829cc7228de02a90e38125b5cf4ee5008
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's not really clear if styles *must* return a non-negative value for
QStyle::pixelMetric(PM_Layout{Vertical,Horizontal}Spacing), but both
QBoxLayout and QGridLayout seems to be robust enough to handle this.
They will simply make sure that the spacing is never negative.
We therefore make QFormLayout equally robust.
Task-number: QTBUG-34731
Change-Id: I62235bfcd8adf7757cf15bc9927b29650ae6459d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
