This allows the QUrl component getters to return fully decoded data,
like they did in Qt 4. This is necessary for some use-cases where the
component like the user name, password or path are used outside the
context of a URL. In those contexts, the percent-encoded data makes no
sense, and the loss of data of what could be represented in a URL is
acceptable.
Also take the opportunity to expand the documentation of those getter
methods, explaining what the options argument does.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: I89f743cde78c02f169c88314bff0768714341419
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows one to instruct QUrl to ignore the percent-encodings and
interpret the data exactly as provided. This is useful in certain
use-cases where the data comes from a non-URL context.
The strict-mode checking of the components is not implemented
yet. Currently, the behaviour is equal to that of TolerantMode.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: Ia5abe045a8ce7f9b50cbce3b5a7e3735e068d03a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since we're about to introduce QUrl::FullyDecoded, this
QUrl::MostDecoded value would be confusing. Replace its uses with what
was intended at the point in question.
Change-Id: Iefd87bc33d37bace507c5cb0f206fa902e08e2df
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This was trying all the possibilities by brute force, but it turns out
that some combinations are not valid so they should not be
tested. What's more, it was using old values of the flags, so this was
actually testing nothing.
Change-Id: I6c2f5230d240fc23418df2d3a1ca905dbc47dd10
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: I2c4456ad7d3846c2262a0ba714ab8f0c9a05c597
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Change-Id: I5039e011f3c9b44ed1887424f11e4e146c3eb07f
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Similar to XCB.
Task-number: QTBUG-24299
Task-number: QTBUG-24296 (partially fixed)
Change-Id: I4c9d813d9645f957f2caad0c4e395ce0d3d222cc
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
In tests when IPv6 is not present QSKIP IPv6 tests.
Task-number: QTBUG-23660
Change-Id: I02abc7322d765a93cbf661e53c76257f03dca73e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
A couple of people reviewing the toText() method (which is new in 5.0)
have said that since the string returned is human readable it should
be a QString not a QByteArray. This change follows their advice.
Change-Id: Ibade9a24870805f7fbe2d299abeb9c6e964f0cf4
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
A (probable) typo was causing the code dealing with anchors
to use uninitialized values. This used to work by chance, but was
indeed detected by Valgrind f.i. when running tst_qregexp --
the indexIn test on anc11 data reported:
==3015== Conditional jump or move depends on uninitialised value(s)
==3015== at 0x514B4EA: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1813)
[...]
==3015== Uninitialised value was created by a stack allocation
==3015== at 0x514B3EB: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1803)
Fixing the code also makes the aforementioned test to succeed.
Change-Id: If7b3e518c1bbfcf12573d2637c33ef2eca27c4d5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The Encoding argument of QCoreApplication::translate()
is deprecated and source code is always assumed to be
encoded in Utf8. Simply remove the encoding argument
from the generated .ui.h files.
Change-Id: If6c40f6df13abd45a0303c863077972c3d1fb685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QIcon has been moved back from QWidget to QtGui, so the QIcon QVariant
and QMetaType handler can now be moved back to QtGui.
Also we can give back QIcon its old number, allowing to get rid of some
compatibility hack when unstreaming QVariant
Change-Id: I439d5c2987c06ecd619f394407850f678164afb8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
- Move the files and tests
git mv src/widgets/kernel/qicon* qrc/gui/image/
git mv tests/auto/widgets/kernel/qicon/ tests/auto/gui/image/
- update the include of QIcon
git grep -O"sed -i s,QtWidgets/qicon,QtGui/qicon," "QtWidgets/qicon"
git grep -O"sed -i s,QtWidgets/QIcon,QtGui/QIcon," "QtWidgets/QIcon"
- Adapt QIcon \ingroup documentation
sed -i s/QtWidgets/QtGui/ src/gui/images/qicon*
- Adapt export macro
sed -i s/Q_WIDGETS_EXPORT/Q_GUI_EXPORT/g src/gui/image/qicon*
- Update .pri and .pro files
- Remove the use of QStyle::alignedRect by copying its content (and
adapt slightly
- Use QGuiApplication::palette() instead of QApplication::palette()
- Add a hook in QGuiApplicationPrivate to call the
QStyle::generatedIconPixmap() from QtWidgets
Another commit follows to adjust QMetaType::Icon and move the QVariant
and QMetaType icon handler back in QtGui
Change-Id: I1b63759f892ebc02dfc30f41bb6e76e0b7451182
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The CI system is now using the parallel_test flag to run tests in
parallel. This test has become flaky, or at least more flaky than it
was previously. Mark it to no longer run in parallel.
Change-Id: I47bca3be620a8f648a0eb9c9b9f26d2d925efc01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextLine::cursorToX returned the line width for cursor positions
outside the width of a wrapped right to left line because the
leading space width was always calculated as 0.
Returning a non-zero width for the leading space does cause
problems for other uses of QTextEngine::alignLine() though
as the textAdvance already doesn't include the leading/trailing
space so subtracting it there double accounts for it.
Task-number: QTBUG-24801
Change-Id: I56cbb139814c32813bebb49de8c045b29154a958
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Maintain the consistency of QWizardPrivate's two members:
QVector<QWizardField> fields;
QMap<QString, int> fieldIndexMap;
during and after calls to QWizardPrivate's
void _q_handleFieldObjectDestroyed(QObject *)
member function. The failure to maintain this consistency
caused an out of bounds access and core dump in
QWizard's field(const QString &name) member function.
QWizard's field(const QString &name) member function expects
the values in the QMap fieldIndexMap to be indexes into the
QVector fields. Prior to this change
_q_handleFieldObjectDestroyed only removed the appropriate
entry from the map and erased it from the vector. It did
not decrement by one all the indexes greater than the index
that was removed from the map and erased from the vector
in the rest of the map.
For example ...
So if initially have the following mapping ...
"field0" -> 0,
"field1" -> 1, and
"field2" -> 2
with fields of size 3. After destruction of "field1" have ...
"field0" -> 0, and
"field2" -> 2
with fields of size 2.
Now attempts to look up "field2" using QWizard::field will
have an out of bounds error and possibly core dump or trigger
an internal Qt assert because an attempt to access
this->fields[2] will be made. It should be accessing
this->fields[1], but does not because the map is no longer
consistent with the vector.
This change adds a decrement by one for all the indexes
greater than the index that was removed from the map and
erased from the vector.
Task-number: QTBUG-25691
Change-Id: Ia2a41027628a65faec4ecdd5da235ddd19746a57
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
e.g. in QStaticText, the data is used just to get the line's y-position
and re-calculates just after the loop to determine the bounding rect and to draw the text;
in QWidgetLineControl, the data re-calculated over and over while the result
is seems to remain the same; probably the caching is needed here too
Change-Id: I0f7eb291532f63eccb9c5f749daebb73ff90632f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The current alternative is to define QT_WIDGETS_LIB before including
qtest.h, but this is not convenient/intuitive when using other build
systems than qmake. If one forgets the define, crashes happen when
using QApplication-related code.
Use <QTestWidgets> in one of the widgets autotests, for testing.
Change-Id: Id96be4976723aea3e8a28c9d0d594daab25a6d90
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The parser is recursive and too deeply nested json would
cause it to exhaust the available stack space leading to
crashes.
We now abort parsing with a DeepNesting parse error if the
document is too deeply nested. The current nesting limit
is set to 1024, which should be more then enough for any
real JSON data set.
Change-Id: I4adea3fd727149f7342536d73cf4530361a0a3a1
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
This reverts commit a17523805e56511465550a6a93a88b3fc3c8325a
The compatibility overloads were removed in change Icf108a80177155f21bb73c165fb8ab5d4e997bc2.
Change-Id: I4861f281451d66a1aa5f3525eea1773dfef0540e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Because the QPA font database would query fallback families inside
findFont(), support for requesting multiple font families in order
of preference (like QFont("Times New Roman, Arial")) did not work,
because the Arial fallback was never attempted. To fix this, we
pass in the queried fallbacks and make sure they are tried before
any platform specific fallbacks.
Task-number: QTBUG-20986
Change-Id: Idb2b717856f013ce2874f00a8debaff60176d2fc
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
+ QChar::LastValidCodePoint enum value that supercede the UNICODE_LAST_CODEPOINT macro
replace uses of hardcoded values with the new API; remove leftovers
Change-Id: I1395c9840b85fcb6b08e241b131794a98773c952
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
inline all non-static members to a static ones (declared with QT_FASTCALL),
ushort converts automatically to uint and the conversion cost is minimal.
Task-Number: QTBUG-13052
Change-Id: I189a6f205736766adcd3de2d61cee71f30cc64f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
texts for the textKeys are stored each in a separate COM(ment) section
so that the maximum text's size is almost 65KB
Task-number: QTBUG-10568
Task-number: QTBUG-111
Change-Id: I7d693741e10e5d78d497cb0af448160077350bb2
Reviewed-by: aavit <qt_aavit@ovi.com>
When qt_ntfs_permission_lookup is used, QFile::permissions failed
for files with long filenames.
Also created a test case for this API, which revealed another bug.
Task-number: QTBUG-25629
Change-Id: I73b7676a9d059c0e782b3f701b2e6bbc92f671ed
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
This can be enabled again now. The sender transfer test is still not
re-enabled since the test would take to long to run if sending
enough data to overwhelm the reciever's kernel buffers.
Change-Id: I4056fdca53ec8ebbcc53dfdc814d8bfdbc73f7ce
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
When a file is specified on a path that includes a drive letter
followed by a colon but no slash then it didn't always account
for the fact that this refers to the current path on that drive.
This fixes the problems in completeBaseName(), baseName() and
path(). Tests are also added for these three cases and some
others too.
Task-number: QTBUG-25353
Change-Id: I47a197c6af066f532442ad269be57597ec61303a
Reviewed-by: Irfan Omair <irfan.omair@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Initially we didn't do this because someone could accidentally create
another target of a conflicting name, and used a variable to store whether we
have created the target already or not.
That wasn't adequeate to deal with finding the package in a scope
like a function, so we used a directory property. However, the directory
property is not valid in the same scopes as the defined target. For
example, finding a Qt module in both a directory and a subdirectory causes
a conflict.
As it is already unlikely that a target would be accidentally created with
a name like Qt5::Core, we should simply use the IF(TARGET) form.
Change-Id: If64f25d45f51edcd1edb0d4bfb5ed3bb2479bd27
Reviewed-by: David Faure <faure@kde.org>
On some systems prior to this change the code
would not build with the following error reported
by gcc:
error: integer constant is too large for 'long' type
Change-Id: I778bce9a72ccf3a41cdf17883d734082ed3fb4b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Name is about mimetype names, while FileName is about, well, file names.
Task-number: QTBUG-25748
Change-Id: I34a9ac1a5fc06dc3e3855365e19c4dc7a1aa2671
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
This completes the transition from connectNotify(const char *) and
disconnectNotify(const char *) to the new QMetaMethod-based
functions.
Removed the old connectNotify autotests and renamed the
connectNotifyMethodXXX autotests to connectNotify, since there is
no longer any ambiguity about which overload is being tested.
Change-Id: Icf108a80177155f21bb73c165fb8ab5d4e997bc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The socket engines already implemented this, but it is a good idea
to test it explicitly.
Task-number: QTBUG-25634
Change-Id: Ife3fe09b0119ed435e4055523c553847739a09fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QUrl::fromLocalFile("/foo") doesn't set Host, but QUrl("file:///foo")
does (to remember that it saw a Host section, even if empty, which is
useful for urls like "remote://"). So ignore the Host flag in operator==.
Change-Id: I4322b4a75420c4e42766c0d65c1b121f28028a76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix operator== and operator< so that a URL with an empty fragment
or query, is not treated as equal to a URL without any fragment or query.
This restores the Qt4 behavior on this particular issue.
Change-Id: Ie989f37353fb13c791b1d558d638d2e8a5b5d1b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This ensures that we only find Qt5 modules from the same directory
as modules we have already found, not from multiple different
directories which may be incompatible.
Change-Id: I7ad1d81ec41bba2e543130740041338ba44a6c3b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Null bytearray means no query, and QString::fromLatin1(QByteArray())
doesn't give a null string, but an empty string.
Same for setEncodedFragment(QByteArray()).
Change-Id: I992e9253e35941d66886456872ea06aa2ae92450
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the scope ID is not set, Mac and Windows will not transmit
packets to link local addresses. This patch implements setting
the scope in the native socket engines and adds a test case.
(it was partially implemented already, though UDP specific code
paths were missed in the unix engine)
Task-number: QTBUG-25634
Change-Id: I23300bdc9856e38458078e913daaa59cd05a74b5
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
If the next active window is already known at the time a focus
out is received, pass it to QWindowSystemInterface.
Fixes a test and Qt Creator's locator bar.
Task-number: QTBUG-24186
Task-number: QTCREATORBUG-1
Change-Id: I0aed4c386c08ed182555c95640e1637c5b67f5ce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
After we have change the policy we should set the readbuffersize to
unlimited again, so that we try to download all data.
Change-Id: I1b9bdb6c2e5f408c920f6e6d7e85a39e4c18316b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This changes all the containers that uses QtPrivate::RefCount
(QMap already had one), and QVariant
In Qt 4.8, it was pointless to have the move constructor because we did
not have quick way to re-initialize a null container. (shared_null still
needed to be refcounted)
But now that we have RefCount, and that the shared_null do not have
reference count, we can implement a fast move constructor that do not generate
code to increment the reference count.
Change-Id: I2bc3c6ae96983f08aa7b1c7cb98d44a89255160b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This cmake function handles all of the necessary logic for using the
include directories of Qt modules, linking to Qt modules, adding
the required definitions, and most importantly, adding the position
independent flags required on UNIX systems to use Qt by default.
The function relies on functionality available in CMake 2.8.8, so it
is only available if that version of CMake or greater is used.
Change-Id: Ibe698e06819129479348c240844264c41553b5fb
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
A leading byte order mark is valid in utf-8 and we should
parse documents starting with those correctly.
Change-Id: Id85398ff6e05b93ceefbaf4a6de5571d5e61ca13
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
there are several reasons to do this:
* text breaking is not a shaper's job;
* since the text breaking rules are bound to a specific Unicode version,
updating Qt's internal unicode data would require updating the data in HB as well;
* makes porting to HurfBuzz-NG some easier
Change-Id: I0bbf8e8a343bc074696f4ddf2ae4e7fa32a61629
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This was crashing because the ':' was found past the end of the
username, causing the recoder to run from position 22 to 11, via the
long way around the memory.
Change-Id: Ic1ae596f34f7db857fb4210294974fb5a6adf691
Reviewed-by: Alexis Menard <alexis.menard@openbossa.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Because SSL2 is disabled in ubuntu's openssl binaries, the SSL
connection is expected to succeed rather than fail when the server
side is using SSL3/TLS1.0.
Used the OPENSSL_NO_SSL2 macro to decide this.
Change-Id: I2c35aa5aa0c9432ae78000c81f70086bdc31843d
Reviewed-by: Richard J. Moore <rich@kde.org>
If the url we pass as parameter already have percentage encoded data,
we don't want to decode it and call fromPercentEncoding. The test
coverage is not complete for qdataurl.cpp file but it is better than
previously and it will also protect us from future regressions.
Change-Id: I79f709f44bed1b7f274a3de639c7e291fa91a193
Reviewed-by: Thiago Macieira
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Rename posFromMove to posIncludesFrame in Widgets and
make the handling more fine-grained; try to clean it up
as soon as the frame margins are known
in QWidgetPrivate::fixPosIncludesFrame().
- Implement QWidgetPrivate::updateFrameStrut().
- Windows: Handle posIncludesFrame in window creation,
notify changed geometry after setting window flags.
- XCB: Do not change the window gravity in propagateSizeHint()
as this causes the window to jump around. Determine
the gravity in window creation, leave it constant and
fix the geometry when setting instead.
- Store the normal geometry when maximize/fullscreen
state change events are received.
- Remove xfails from fixed tests
Task-number: QTBUG-25331
Task-number: QTBUG-24905
Task-number: QTBUG-24294
Change-Id: I89c7229d86aaf88f02247d63915da7905e4a27ea
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
19d160b72b broke it temporarily, and this wasn't detected by
tst_headersclean, because it sets QT_NO_CAST_FROM_ASCII too,
which disabled the faulty code.
So this adds a new unittest for QT_NO_CAST_FROM_BYTEARRAY alone.
Change-Id: Iaf7a36a1378e77188bcc636e5dc9a1f9b84f70a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
C++ distinguish between "char", "signed char" and
"unsigned char", they are three independent types.
Fix QVariant behavior on ARM. On ARM "char" may mean
"unsigned char", but we depends on the sign during
a numerical conversions.
Change-Id: I610ce3fb88ed5964b67f3ae442d264fe16b2d261
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The implicit cast to QJsonValue was being ignored probably because the
compiler was generating a default QJsonValueRef assignment operator
Change-Id: I3a041595497308868dd7e4aab71027ce21bf8f0b
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This doesn't compile with a typical cross-compilation setup, which
generally won't include cups headers. The commit should have been
rejected, but wasn't, due to a bug in the Qt Project CI.
Since it now causes all other modules depending on qtbase to fail their
CI, it must be reverted to minimize disruption while the commit can be
amended and/or the test toolchain updated to include cups headers.
This reverts commit 80f7a38890.
Change-Id: I315ae275b37de358a74af28ab7bd691c9849acba
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
CUPS is the only supported print system on UNIX, LPR/PS support has
already been dropped but some LPR specific code still remains.
* Move qt_getCupsPrinterPaperSizes from qprinterinfo_unix to
QCUPSSupport
* Remove qprinterinfo_unix as no longer used
* Remove LPR related code from QPdfPrintEngine
* Remove all QT_NO_LPR uses
* Remove most QT_NO_CUPS uses, use QT_NO_PRINTER where necessary
Some QT_NO_CUPS uses remain in QPdfPrintEngine, these will be removed
in a following change implementing a CUPS plugin.
Change-Id: I439b6fad9cf88c3d24aa48e49475f49ad310dbad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The overload of this method was renamed
in b64426248d but this one was not.
Change-Id: I60a6ddf0fcf9deea31ccf51e7b0db16c66023356
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This also tests by consequence that the behaviour of QByteArrays
containing NULs is consistent. Right now, that means the QByteArray
processing stops at the NUL, which is the same behaviour as if a
pointer to the byte array's data were used. (it's what happens if
there's no QByteArray overload and the const char* one is called)
Change-Id: If56a822f95866e8cb5b153d07b48198bb83fb386
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This commit completes the previous commit so that both QString and
QStringBuilder now operate on UTF-8 input.
A small fix was required in QStringBuilder: an if clause isn't enough
to separate the two append versions. Since there are no QString
functions that append to char*, if we're converting to a QByteArray,
we need to go through a QString first in a separate function.
Change-Id: Ic503340c5d0c32d420c90c91cc2e0fc1ae9230f3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I052a3412a568ad639f2bf169b4491b56dddff1c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The file has been UTF-8 encoded for years, which means that the line:
QString longerBLOB( "abcdefghijklmnopqrstuvxyz¿äëïöü¡ " );
Loaded a mojibake into QString. Then, this data was stored as a blob
in the database by calling longerBLOB.toLatin1() (a QByteArray), and
reloaded for check using toString().
Once the QString default codec changes to UTF-8, the mojibake would
get fixed, and the test would fail. Make sure it doesn't happen.
Change-Id: If12d6124c973e4a1c1b7978d90fffb9aa5545c66
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Icb3ab0e1f4f3173563f3de36115b5457cf1ba856
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
In Qt 4, we loaded resources through the QTextEdit or
QTextControl if they were the parent of the document.
Modularization for Qt 5 broke this, as we can't cast
the parent to a QTextEdit anymore.
The fix is to make the loadResource() methods in QTextControl
and QTextEdit invokable and discover and invoke them at
runtime on the parent object.
Task-number: QTBUG-25116
Change-Id: Iba04bc16849b0c5ddcd275f12d1a386a8fe591bf
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
> http://www.unicode.org/versions/Unicode5.2.0/
D. Character Additions:
There are three new characters in the newly-encoded Kaithi script that will
require changes in implementations which make hard-coded assumptions about
composition during normalization. Most new characters added to the standard
with decompositions cannot be generated by the operations toNFC() or toNFKC),
but these three can. Implementers should check their code carefully
to ensure that it handles these three characters correctly.
U+1109A KAITHI LETTER DDDHA
U+1109C KAITHI LETTER RHA
U+110AB KAITHI LETTER VA
UCD 6.1 adds two more of them:
U+1112E CHAKMA VOWEL SIGN O
U+1112F CHAKMA VOWEL SIGN AU
Change-Id: I781a26848078d8b83a182b0fd4e681be2a6d9a27
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Since it deals with paths, let's use the proper path-handling
functions.
Change-Id: I896d2c472dfd675e9ff247657447178702f178be
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Show that nothing is changed either way, regardless of the encoding
flags used.
Change-Id: I31fba5f87eae777d4b708ab789b32169004bcbcc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It should only strip one slash (as the name indicates), and not if the
path is just "/".
Change-Id: I133a81977241de77a49d1d1559143d30e0bd52f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test is passing for Windows now in CI due to recent fixes, so
remove the insignification.
Change-Id: Ib74aea443c4a66c9bf743d88e15d9f27f9ac2fe4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ib1eaf42679ab5db4005192c3d00ba79e43edfcca
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This way, QWinEventNotifier will work on all Windows systems, not just
with the default event dispatcher. Other dispatchers (other than
QWin32EventDispatcher) are permitted, so the class should not abort just
because of that.
If a dispatcher really doesn't want to implement this, they need to
implement the virtuals to do nothing, possibly print a warning.
Change-Id: I2c132bcde95b9d5941c8906a0fcd2ad964087772
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Although we created an enum for pause modes to make 5.x binary
compatible with 5.0, the enum value is not well named.
In 5.1, we propose to add PauseOnProxyAuthentication to the enum.
PauseOnNotify is not clear what it means, while PauseOnSslErrors is.
Any new notification in a minor release would need a new enum value
otherwise applications would get pauses they did not expect.
Task-number: QTBUG-19032
Change-Id: I4dbb7467663b37ca7f0551d24a31bc013968bedc
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This reverts commit df43b9a06a.
Using the same depends information as QMake provides adds a lot of
convenience for users, and is mostly 'correct' from a CMake
point of view anyway.
Change-Id: I8f2a2f74a687c25a0dedcc491ef72ddb5b136090
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If we're not going to verify the peer, or we know in advance that
windows won't have a CA root then don't ask it to verify the
certificate chain.
The test case started failing in CI when the windows cert fetcher
was integrated due to timing change. I've relaxed the timing
requirement of the test to avoid it being unstable.
Task-number: QTBUG-24827
Change-Id: I694f193f7d96962667f00aa01b9483b326e3e054
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
It seems that this case is failing on CI because OpenGL version,
so skip if OpenGL is not recent enough.
Task-number: QTBUG-24192
Change-Id: I543e7a092e5c107ee57cd9dce7dc5c890a0315cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I7e7202e6a1a84699ae0d43e4b2e7ee9ec87ed0b6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The mentioned records for råkat.se cannot be resolved.
Note these were marked with a FIXME in the first place.
Change-Id: I4ea3bbb0aec8ca1b3487c44656b48a8715228886
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
I wrote nonsense in that commit. The older methods that take a timeout
all take milliseconds, and the comments in the unit test really meant
milliseconds, not seconds. 1s is not shorter than 100ms....
Change-Id: Ic18899bb0462d89575dc5a9a311478adc4dea1cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is much more performant than calling QObject::receivers(const char*)
Can be used instead of connectNotify in some cases.
Change-Id: I19e0933f678f171f515d9a0f69f0ad4fb7d894b4
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reimplementations of connectNotify() and disconnectNotify() can
assume that the signal argument is in normalized form, but after the
introduction of the Qt5 meta-object format, it could happen that it's
not.
The problem is that the internal QArgumentType class, which attempts
to resolve a typename to a type id, was calling QMetaType::type().
QMetaType::type() falls back to trying the normalized form of the
typename if the original argument can't be resolved as a type (this
behavior isn't documented, but that's how it works). This means that
e.g. QMetaType::type("const QString &") returns QMetaType::QString.
Since QMetaObjectPrivate::indexOfMethodRelative() (more specifically,
the methodMatch() helper function) prefers to compare type ids
over typenames (since the type ids are stored directly in the meta-
object data for built-in types), the method lookup would *succeed*
for signatures with non-normalized built-in typenames as parameters.
QObject::connect() would then think that it did not have to
normalize the signature (see "// check for normalized signatures").
The consequence was that the original, non-normalized form got
passed to connectNotify().
This commit introduces an internal typename-to-type function that
is the same as QMetaType::type(), except it doesn't try to normalize
the name. This way, the only place where normalization can occur in
the signature-to-meta-method processing is through the calls to
QMetaObject::normalizedSignature() in QObject::connect() itself.
The implication is that there are now cases where the method
signature will be decoded and processed twice, where processing it
once was sufficient before. On the other hand, it is consistent with
the pre-Qt5-meta-object behavior, where we predict that the
signature is already normalized, and only perform (comparatively
costly) normalization if the initial lookup fails.
Change-Id: Ie6b60f60b0f9a57ebd378d980329dac62d57bbd9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
static_metacall was never set on the metaobject written by
QMetaObjectBuilder::fromRelocatableData, sometimes causing a crash. It
should be initialized to 0.
Change-Id: I79373d895e131f0cc2ff1af6d2177a0c1a282be7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The Qt buildsystem is creating the config files for it even
when it is not building QtDBus, so Qt5DBus_FOUND = True.
Re-enable the CI testing on mac with this change.
Task-number: QTBUG-25522
Change-Id: I5d2690d17fde6c5aabcbdd3e2eef9f0846edd97d
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest fails to build after the introduction of the
QMetaMethod-based connect/disconnectNotify() functions; we are
intentionally keeping the old const char * versions (overloads) for
a limited time, to avoid disrupting other modules.
This commit will be reverted as soon as the compatibility overloads
have been removed.
Change-Id: I9b5a40b51ffa3bfa3d185410389678c262ca7b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This API will fully replace the const char *-based connectNotify()
and disconnectNotify() in Qt5; the old functions will be REMOVED
before Qt 5.0 final.
The new implementation fixes the long-standing issue of
connectNotify() not being called when using the (internal)
index-based QMetaObject::connect() (e.g., from QML).
As with the old API, there are still two "unintuitive" behaviors
concerning disconnectNotify():
- disconnectNotify() is not called when the signal is disconnected
using the QObject::disconnect(QMetaObject::Connection) overload.
- disconnectNotify() is not called when a receiver is destroyed
(i.e., when a connection is implicitly removed).
The old versions of connectNotify() and disconnectNotify() are kept
for now, and they are still called. They will be removed once known
existing reimplementations (e.g., QtNetwork, QtDBus) have been
ported to the new API.
Change-Id: I8b4f007f3c6d89199c1ba04a3e23c8ca314e0896
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The test is passing in CI for both Mac and Windows, so removed the
insignification from it.
Task-number: QTBUG-24885
Change-Id: Ida39d98b72e49fc82358d016b8de725bbfc5d6de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has been passing consistently since the previous crash was
skipped in commit 6dbd00b120.
Task-number: QTBUG-22792
Change-Id: I41ac001a3b9e16cde4d674dc9f34ab2dffb848cd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has been passing consistently since it started running in CI.
Task-number: QTBUG-24295
Change-Id: If2a163607ae72cae9e28619dd5de1b333aea4ed9
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These tests have been passing consistently since they started running
on Windows in CI.
Change-Id: I4505497afc477a7f4fbda0acc29987d0d0cf220a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
