Add compile-time testing to make sure that we can declare a JNI
class String that maps to java/lang/String.
Change-Id: I2b68b2b46112e56b279f3fcddc3d71847a005924
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
QlistWidgets with sorting enabled do not sort stable. A re-sort is
triggered when any Qt::ItemDataRole is changed and not only when
Qt::DisplayRole is changed. Due to an unstable optimization, the changed
element gets inserted at the beginning of their respective "equivalence
group".
This patch disables the optimization and ensures stable sorting
with std::stable_sort. Sorting is only performed, if the subset of
changed items in the range [begin, end] is not already sorted in the
whole list. For this purpose, it is assumed that the list has already been sorted before begin and after end. This assumption minimizes the subset to check.
Limits / side effect:
The patch focuses on the most common use case, which is a single item being changed. Replacing the optimization by std:stable_sort can potentially slow down the sorting performance of large data sets.
Task-number: QTBUG-113123
Pick-to: 6.5 6.6
Change-Id: Ib2bd08f21422eb7d6aeff7cdd6a91be7114ebcba
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
When constructing a QWeakPointer<T> from a rvalue QWeakPointer<X>,
even if X* is convertible to T*, actually doing the conversion
requires access to the pointee's vtable in case of virtual inheritance.
For instance:
class Base { virtual ~Base(); };
class Derived : public virtual Base {};
Now given a `Derived *ptr`, then a conversion of `ptr` to `Base *` is
implicit (it's a public base), but the compiler needs to dereference
`ptr` to find out where the Base sub-object is.
This access to the pointee requires protection, because by the time we
attempt the cast the pointee may have already been destroyed, or it's
being destroyed by another thread. Do that by going through a shared
pointer. (This matches the existing code for the converting assignment.)
This requires changing the private assign() method, used by QPointer, to
avoid going through a converting move assignment/construction, because
one can't upgrade a QWeakPointer tracking a QObject to a QSharedPointer.
Given it's the caller's responsibility to guard the lifetime of the
pointee passed into assign(), I can simply build a QWeakPointer<T> and
use ordinary (i.e. non-converting) move assignment instead.
Change-Id: I7743b334d479de7cefa6999395a33df06814c8f1
Pick-to: 6.5 6.6
Fixes: QTBUG-117483
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractItemView installs the delegate as an event filter on the
editor, so the delegate will get the focusOut event (and other
events) before the editor does. QAbstractItemDelegate will then
emit commitData, signaling that the "updated" data should be
written back to the model.
In the case where the editor of a delegate (QAbstractItemDelegate)
is a QSpinBox with keyboardTracking set to false, the value of
the spinbox won't be updated while typing, but only when the
spinbox's text edit focus is lost. In this case, the delegate's
commitData will be emitted before the spinbox has had a chance
to update the value in its handling of the focusOut event.
To fix, make sure to update the value before the data is
committed to the model in the delegate's tryFixup method.
Fixes: QTBUG-116926
Pick-to: 6.5 6.6
Change-Id: I68540964342407d23387e4404a0fe3f00d80eb5f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a move-to-trash operation failed, e.g. because the file was opened by
another process (or QFile), then the moveToTrash function would still
return true.
MSDN documents the IFileOperation::PerformOperations to return whether
the operation succeeded, but evidently this is only a statement about
the execution of queued up operations, not a statement about any of the
operations' success.
If the operation succeeded is reported by an HRESULT parameter
of the IFileOperationProgressSink::PostDeleteItem implementation,
and we ignored that parameter so far.
Check it via the SUCCEEDED macro, and set a boolean sink variable based
on that, which we can inspect to return the correct value.
Augment the test case by opening those files we create ourselves, and
if that fails (which it will on Windows, but not necessarily on other
platforms), then try again after closing the file. If the first attempt
succeeded, then the source file must also be gone.
Pick-to: 6.6 6.5 6.2 5.15
Fixes: QTBUG-117383
Done-With: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Icb82a0c9d3b337585dded622d6656e07dee33d84
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
d026fad3d9 added converting constructors
for QPointer. This however made converting _assignments_ ambiguous,
introducing a regression for users coming from Qt < 6.6.
This code:
QPointer<Base> base;
QPointer<Derived> derived;
base = derived;
used to convert `derived` to `Derived *` (using the implicit conversion
operator from `QPointer<Derived>` to `Derived *`), and then the
assignment operator for `QPointer<Base>` that took a `Base *`.
The introduction of the conversion constructor in 6.6 makes it possible
to convert `QPointer<Derived>` to `QPointer<Base>`, and then fall back
to the compiler-generated assignment operator for `QPointer<Base>`.
The result is that the code above is now ambiguous and stops compiling.
Fix this by adding a converting assignment operator for QPointer.
I'm only adding the const-lvalue overload because the implementation
requires going through the private QWeakPointer::assign helper. We
cannot copy-assign or move-assign the inner QWeakPointer, as those
assignments require lock()ing the QWeakPointer and that's not possible
on a QObject-tracking QWeakPointer (but cf. QTBUG-117483).
Assigning from a rvalue QPointer would mean calling assign() on
the internal QWeakPointer _and_ clear the incoming QPointer,
and that's strictly worse than the lvalue overload (where we just call
assign()).
Change-Id: I33fb2a22b3d5110284d78e3d7c6cc79a5b73b67b
Pick-to: 6.6 6.6.0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes it easier to locate later which test may be leaking stuff.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd178713f869752761
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The moveToTrash tests, on XDG platforms, would be trashing to
~/.local/share/Trash. Unlike Windows and Apple systems, the XDG trash
spec creates two files and these tests weren't deleting both of them, so
we had a slow increase of left-over files in ~/.local/share/Trash/info.
Cleaning up ~/.qttest is left as an exercise for the users. For example,
$ cat ~/.config/user-tmpfiles.d/qttest.conf
#Type Path Mode User Group Age Argument
e %h/.qttest 0700 - - 1w
Pick-to: 6.6 6.5 6.2
Change-Id: I9d43e5b91eb142d6945cfffd1786aeff91d34fde
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Android APIs use integer constants like enum values, so they are mapped
to one of the integeral types (jint, jshort, jlong etc) on the C++ side.
Enable C++ code to declare an equivalent enum (scoped or unscoped), and
to use that enum as a type in JNI calls by treating it as the underlying
type in the signature() generator.
Add a helper type trait that maps enums to their underlying type and
other integral types to themselves (we can't use std::underlying_type_t
on a non-enum type). Add tests.
Note: Java Enums are special classes with fields; this change does not
add any special support for those.
Change-Id: Iec430a1553152dcf7a24209aaebbeceb1c6e38a8
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Don't get a QModelIndex out of a temporary QPersistentModelIndex.
Pick-to: 6.6
Change-Id: Ida9e25f1a17130e19b75221e1189e6f2fccd3f27
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Equivalent to get/setStaticField.
Add a test, and tighten up the surrounding test code a bit.
Change-Id: Ic0993c5d6223f4de271cb01baf727459b5167f94
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Template functions don't permit partial specialization, e.g. we cannot
specialize typeSignature() to return an array signature for any
std::vector or QList type. We need to do that for better array support,
so move those functions as static members into a template class, which
then can be specialized.
Since submodules are both calling and specializing typeSignature and
className as template functions, keep and use those until the porting is
complete.
Change-Id: I74ec957fc41f78046cd9d0f803d8cc9d1e56672b
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
The type lives in the QtJniTypes namespace, which is where types end up
that are declared through the Q_DECLARE_JNI_CLASS/TYPE macros. Having a
String type in that namespace prevents us from declaring the Java String
class as a QtJniTypes type, which is silly.
Perhaps this type becomes obsolete at some point with std::string being
a constexpr type in C++23, but until then we need it. It has no ABI, so
renaming it us safe.
Until submodules are ported, leave a compatibility alias String type,
which also prevents us from declaring a String JNI class in tests until
the alias is removed in a later commit.
Change-Id: I489a40a9b9e94e6495cf54548238438e9220d5c1
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Tinja Paavoseppä <tinja.paavoseppa@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Amends 4f4a8e75ab, after which
QItemSelectionModel printed a warning when destroying the model.
We reset the selection model in response to the model getting destroyed,
and since the model is already set to be nullptr at this point the
select() function complains about changing the selection with no model
set being a no-op.
Fix this by not calling reset() when the model gets destroyed - the
stored selection and currentIndex are already reset at this point -
and instead only call reset() when a new model is set in initModel.
Fixes: QTBUG-117200
Pick-to: 6.6.0 6.6 6.5 6.2
Change-Id: I12fc6b3fb2f2ff2a34b46988d5f58151123f9976
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If the QCommandLineOption doesn't have a valueName, the parser won't
read the argument, therefore returning an empty value. If the developers
are calling ::value on the option, they clearly think it's expected to
get a value but won't ever be getting one, so we better warn them about
it.
Change-Id: I434b94c0b817b5d9d137c17f32b92af363f93eb8
Reviewed-by: David Faure <david.faure@kdab.com>
Use recursive descent to handle parentheses in config condition
expressions. This fixes cases like 'NOT (A AND B)'.
Fixes: QTBUG-117053
Change-Id: Iab1b6173abe00d763808bb972a9a5443ffa0938d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
[ChangeLog][QtWidgets][QDockWidget] A floating dockwidget that doesn't
have the DockWidgetClosable feature flag set can no longer be closed by
a call to QWidget::close or a corresponding keyboard shortcut (such as
Alt+F4).
Fixes: QTBUG-116752
Pick-to: 6.6 6.5
Change-Id: I7859a2eed11f0e4ee013f7f56611e282e9bcae9a
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This serves as regression test for future fixes of the config condition
evaluator.
Task-number: QTBUG-117053
Change-Id: Ib05fe5f5fb6aa2d440ecbc8affaf99b040553c06
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
When loading the fonts, we go through all the named instances
and register these as subfamilies. In addition to exposing these
variants by style name, we also register them with the according
weights, italic style and stretch. This adds a field to FontFile
to allow piping the instance index through to when we instantiate
the face.
[ChangeLog][Fonts] Added support for selecting named instances in
variable application fonts when using the Freetype backend.
Task-number: QTBUG-108624
Change-Id: I57ef6b4802756dd408c3aae1f8a6c792a89bee6a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The XML stream writer previously added namespace declarations with the
same URL as existing ones, but new names, and renamed the XML elements
to use the new namespaces instead of the existing ones.
[ChangeLog] Fix renamed and duplicated namespaces in QXmlStreamWriter.
Pick-to: 6.5 6.6
Fixes: QTBUG-75456
Change-Id: I90706e067ac9991e9e6cd79ccb2373e4c6210b7b
Done-With: Philip Allgaier <philip.allgaier@bpcompass.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Not only are we subject to Q and P defines, we're also included in the
unnamed namespace now.
Amends df030e06a8.
Pick-to: 6.6
Change-Id: Ie2f4c9f45d9845d8a26140e0e1214e87b615ff02
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QVariant(QMetaType) constructor is a major anti-pattern: unlike
*every* other QVariant's constructor, it doesn't build a QVariant
holding the QMetaType object, but a QVariant of the specified type.
Introduce a named constructor for this use case instead.
In principle, this should lead to a deprecation of the QMetaType
constructor... except that it's used everywhere, so I can't do it at
this time.
Drive-by, improve the documentation of the QVariant(QMetaType)
constructor (since it's basically c&p for the new fromMetaType
function).
[ChangeLog][QtCore][QVariant] Added the QVariant::fromMetaType named
constructor, that builds a QVariant of a given QMetaType.
Change-Id: I4a499526bd0fe98eed0c1a3e91bcfc21efa9e352
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
That we have two macros to declare a C++ type to represent a Java class
is confusing. The TYPE macro as of now allows us to declare array types,
but with QJniArray we won't need that anymore, and can just use Class[]
as the type instead. Changing that will be a follow-up commit; for now,
get rid of TYPE-usages to declare regular classes.
Change-Id: Iea0a9548772ca701148442412cf6ad567583213f
Reviewed-by: Zoltan Gera <zoltan.gera@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This is needed to support passing it to other processes so they can
enable legacy, compatibility mode. Right now, there's no such code, but
I am 90% certain we'll need it soon in 6.6.x, if not for compatibility
changes in the future.
There's a bug in passing a QNativeIpcKey to another process that causes
QSharedMemory to use the wrong QSystemSemaphore for control (a feature
that should never have existed in the first place, but we're 15 years
too late on that). I have not yet investigated a fix for this, but it
will likely involve knowing the original legacy key.
Pick-to: 6.6 6.6.0
Change-Id: Idd5e1bb52be047d7b4fffffd1750b547013cb336
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
So we can add them in the future but cause older versions of Qt to
reject them if they don't know what they are.
Pick-to: 6.6 6.6.0
Change-Id: I512648fd617741199e67fffd1782b85935bb832a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Also move some docs from asBackendZone() to systemTimeZone(), making
clear that the system zone object is current at the time of creation
and won't be updated if the system is reconfigured. Adapt some tests
to fail and make clear that the system is misconfigured if no valid
system zone is found.
[ChangeLog][QtCore][QTimeZone] If systemTimeZone() is unable to
identify a valid system time zone, it now produces a warning the first
time it encounters the problem.
Task-number: QTBUG-116017
Change-Id: Ia437d8a03ff3cbf2b2cd98e8a8c3aebe50c1ee32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
whenAll() and whenAny() create a shared context object which is
referenced by the continuation lambda. The refcount of context is only
correctly managed when it is copied non-const to the lambda's
capture list.
Fixes: QTBUG-116731
Pick-to: 6.6 6.6.0
Change-Id: I8e79e1a0dc867f69bbacf1ed873f353a18f6ad38
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There's no need for atomic semantics for a simple "scope value
rollback" (not sure why the code doesn't use the real thing).
There's also no semantics that make sense.
Extract the integer out of the atomic and store it back.
Change-Id: I8ba89216d1931a73ff22a8af7fd656c3f6948793
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Compilers that support 128-bit integer types usually don't have
support for 128-bit literals, so provide Q_(U)INT128_C macros and back
them with UDLs. This, of course, only works in C++, so until compilers
provide built-in literals that support C, too, that's all we get.
[ChangeLog][QtCore] Added Q_INT128_C() and Q_UINT128_C() macros to
create qint128 and quint128 literals in a platform-independent way.
Pick-to: 6.6 6.6.0
Fixes: QTBUG-116822
Change-Id: I4be645baf2e007ee1aa1a27f9b5166671806dc49
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of our testing effort where we try enabling more tests for
Web Assembly platform on CI. Not all tests work out of box, so some of
them will require followup work.
This commmit also introduces a new mechanism of automatically renaming
files when they are added many times with the same filename to single
translation unit.
Change-Id: I620536494ea83aeb9b294c4a35ef72b51e85a38b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This fixes the recently added QEXPECT_FAIL about glob-deleteall
in a local directory (with a binary cache). Before adding a glob match
we ask the more-local (higher-precedence) directories if they have
a glob-deleteall for that mimetype, and skip it then. This "asking"
is a virtual method, implemented for both XML and binary providers.
Change-Id: I6e4baf0120749f3331fd2d9254bea750a322b72d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old name Asia/Calcutta is being phased out. We can't assign
QTzTZP, so select between new name and old using a reference variable.
In the process, fix a QCOMPARE() against bool to a QVERIFY().
Pick-to: 6.6 6.5
Change-Id: I7cd8a813f8a88c8ae4ba07213f04f4ad0860cec0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A QMimeTypePrivate used to belong to a single provider, which would
provide the complete data for it.
But since the redesign in commit 7a5644d648, each provider
represents is a single mime directory, and the merging happens at the
QMimeDatabase level. So we need a QMimeType[Private] to be just a name
(a "request" for information about this mimetype) and the information
for that mimetype is retrieved on demand by querying the providers
and either stopping at the first one (e.g. for icons) or merging
the data from all of them (e.g. for glob patterns).
The XML provider was using QMimeTypePrivate as data storage,
give it its own struct QMimeTypeXMLData for that purpose instead.
Task-number: QTBUG-116905
Change-Id: Ia0e0d94aa899720dc0b908f40c25317473005af4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When running tst_qmimedatabase with the full shared-mime-info test suite
(which unfortunately requires local setup so this is easy to overlook),
we need *.webm to still be associated with video/webm.
So to test glob-deleteall, do that in installNewLocalMimeType(), with
other similar tests.
This however unearthed the following bug: the handling of glob-deleteall
is only correct when the local dir has no binary cache. It's broken
when using a binary cache. Added a QEXPECT_FAIL for now because this is
going to be fixed as part of a major redesign, coming up.
I also found out that neither xdgmime nor gio do this correctly...
Change-Id: Ib075fcdb792f60a859f23db8c2d7e1c6524f9050
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For historic reasons, the test had a single list of override xml files
to copy first into the global dir, and then into the local dir.
But glob-deleteall only makes sense in the local dir (as per the MIME
spec). Having two definitions for the same mimetype in the same dir
is undefined behavior, so the test was working by chance only, and
my upcoming refactoring/fixes caught that.
Change-Id: I4717683b4b3f9ba69f1fd815669460789700e877
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since compilers don't provide such macros, do it ourselves.
In order to test these macros, add ad-hoc specializations of
QTest::toString() for qint128 and quint128 locally to the test. Turns
out it's not too hard to write them, so we might move them to a public
header, yet.
Pick-to: 6.6
Change-Id: I1483f3af2ccec6038e1c780649f9ffe413bb59ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that QIntegerForSize<16> and std::numeric_limits<quint128> work
and that q(u)int128 are available in C mode, too.
Pick-to: 6.6
Change-Id: I44af8282399c78f6e74a8268af53bad64407ca34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were two problems:
- On platforms where QFLOAT16_IS_NATIVE == true, a qHash(qfloat16{})
call has become ambiguous between the three FP qHash() overloads
(float, double, long double), where it was unambiguously calling the
float one in Qt 6.4. This SiC was caused by the replacement of
operator float() by operator __fp16() in
99c7f0419e, which is in Qt 6.5.
- On platforms where QFLOAT16_IS_NATIVE == false, qHash(qfloat16{})
would produce a different value from qHash(float{}), and therefore
Qt 6.4, when the seed was != 0, because the former would go via the
one-arg-to-two-arg qHash adapter while the latter one would
not. Since participating functions are inline, this causes old and
new code to produce different hash values for the same qfloat16,
leading to a BiC possibly corrupting QHash etc.
Fix both by adding an explicit qHash(qfloat16). This function is
inline, so it doesn't add a new symbol to 6.5.x.
[ChangeLog][QtCore] Fixed qHash(qfloat16) which was broken from 6.5.0
to 6.5.3, inclusive. If you compiled against one of the affected Qt
versions, you need to recompile against either Qt 6.4 or earlier or
6.5.4 or later, because the problematic code is inline.
Pick-to: 6.6 6.5
Fixes: QTBUG-116064
Fixes: QTBUG-116076
Change-Id: Id02bc29a6c3ec463352f4bef314c040369081e9b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
0b421fa58b9a73d657bf17834788fd1175c4767e ensured a correct focus chain,
when buttons in a QDialogButtonBox were hidden.
The implementation did not check, if a hidden button was added via
setStandardButtons(). In consequence, it was removed from the
standardButtonHash and never added again.
QDialogButtonBox::button() returned nullptr for a standard button,
once it had been hidden. That introduced a regression.
This follow-up patch makes sure, a standard button is not removed
from standardButtonHash, when hidden. By no longer removing it from
standardButtonHash, it makes showQDialogButtonBox::button() always
return the pointer to the standard button, even if it is hidden.
The function handleButtonDestroyed() used the argument
QDialogButtonBoxPrivate::RemoveRule::KeepConnections, in order to leave
signal/slot connections untouched. It expected the the destroyed button
to be removed from standardButtonHash. In order to retain that
functionality, the enum class RemoveRule is renamed to RemoveReason,
and one value was added. QDialogButtonBoxPrivate now handles all
necessary cases of removing a button:
ManualRemove (previously Disconnect):
- remove button from roles
- remove button from standardButtonHash
- disconnect all signals
LeaveEvent (previously KeepConnections):
- remove button from roles
- do not remove button form standardButtonHash
- do not disconnect signals
Destroyed (new):
- remove button from roles
- remove button from standardButtonHash
- do not disconnect signals (QObject will do that)
An autotest is added to tst_QDialogButtonBox.
Task-number: QTBUG-114377
Pick-to: 6.6 6.5
Change-Id: Ib28625d44fa89c3d06f181f64875c2e456cebbfa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
By first checking if the list has any matches before potentially making
it detach.
Change-Id: I7a42c2910ef6efc45033e562573414a3a9ef972e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
91dcc76fc1 might have fixed the underlying issue, so we no longer
need the XFAIL codepath at all.
Fixes: QTBUG-114720
Change-Id: I67ccbed67a0536b679c50c26eb0b3e51c93dceeb
Pick-to: 6.6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
rowsAboutToBeMoved() and rowsMoved() signals aren't emitted for
QSortFilterProxyModel, which meant the two connections in the
ObservingObject's constructor didn't trigger the slots, which let the
test pass (the store/checkPersistentFailureCount stayed at 0).
- Instead connect to layoutAboutToBeChanged() and layoutChanged()
respectively, these two are emitted for QSFPM
- Use PMF syntax
- Verify m_persistent{Proxy,Source}Indexes aren't empty
Change-Id: I8b83989de02c2bfb22bde9b230cb5b68814f74b6
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Because the local `seed` variable shadowed the member one, this test
was run for each QFETCH_GLOBAL with the same data and seed. That
doesn't make sense, so make the test use the member variable `seed`,
as all other tests already do.
Since zero is one of the seeds coming from QFETCH_GLOBAL, drop the
seedless calls to qHash(), too.
Amends 64bfc927b0.
Pick-to: 6.6 6.5 6.2
Change-Id: I1e22ec0b38341264bcf2d5c26146cbbcab6e0749
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code only tested with seed = 0 and seed = 1045982819, the
latter being a "random number", which, however, fits into
32-bits. Since Qt 6.0 increased the seed from uint to size_t, amend
the test to actually test a seed value with some of the upper half of
bits set, too, also in 64-bit mode.
While we're at it, also test with each seed's bits flipped for extra
coverage.
Remove a static assertion that prevented testing seeds with the MSB
set.
Pick-to: 6.6 6.5 6.2
Change-Id: I5ed6ffb5cabaaead0eb9c01f994d15dcbc622509
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This commit reverts 2d77051f9d.
When requesting an allocation of size 0, we will actually get
a nullptr.
qarraydata.cpp:
~~~
if (capacity == 0) {
*dptr = nullptr;
return nullptr;
}
This will let the Q_CHECK_PTR trigger falsely. Such an occurrence was
initially detected during the cmake_automoc_parser build-step.
Found-by: Marc Mutz <marc.mutz@qt.io>
Task-number: QTBUG-106196
Pick-to: 6.6
Change-Id: Icb68c5dd518c9623119a61d5c4fdcff43dc4ac5d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QStaticLatin1StringMatcher is a static templated Latin-1 Boyer-Moore
string matcher which can be case sensitive or not. It should be used
when the needle is known at compile time so there is no run-time
overhead when generating the skip table.
The convenience functions qMakeStaticCaseSensitiveLatin1StringMatcher
and qMakeStaticCaseInsensitiveLatin1StringMatcher should be used to
construct the matcher objects.
Green Hills Optimizing Compilers are currently not supported.
[ChangeLog][QtCore] Added QStaticLatin1StringMatcher, which can be used
to create a static constexpr string matcher for Latin-1 content.
Task-number: QTBUG-100236
Change-Id: I8b8eed1e88e152f29cbf8d36d83e410fafc5ca2c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The latest XDG spec (0.8) defines XDG_STATE_HOME that does not exist
in QStandardPaths::StandardLocation.
Some Linux distributions clean XDG_CACHE_HOME on restart which makes
XDG_STATE_HOME useful as a path for saving application state.
This commit adds StateLocation and GenericStateLocation to serve as a
StandardLocation for XDG_STATE_HOME for all platforms.
This commit also updates docs and tests to fit the new changes.
[ChangeLog][QStandardPaths] Added StateLocation &
GenericStateLocation to StandardLocation
Change-Id: I470602466c37f085062cc64d15ea243711728fa5
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWidget::setVisible is virtual, and called via hide() by both the
QDialog and the QWidget destructor. A dialog that becomes invisible
when getting destroyed will at most execute the QDialog override.
Subclassing QDialog and overriding setVisible() to update the state
of the native platform dialog will not work, unless we explicitly
call hide() in the respective subclass's destructor.
Since e0bb9e81ab, QDialogPrivate::setVisible is
also virtual, and gets called by QDialog::setVisible. So the clean
solution is to move the implementation of the native dialog status
update into an override of QDialogPrivate::setVisible.
Add test that verifies that the transient parent of the dialog
becomes inactive when the (native) dialog shows (and skip if that
fails), and then becomes active again when the (native) dialog is
closed through the destructor of the Q*Dialog class. The test of
QFileDialog has to be skipped on Android for the same reason as the
widgetlessNativeDialog.
Fixes: QTBUG-116277
Pick-to: 6.6 6.5
Change-Id: Ie3f93980d8653b8d933bf70aac3ef90de606f0ef
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This allows us to control whether to run this particular test in ASan
mode or with specific loggers or not. Adding the expected log output for
tst_silent for other loggers is left as an exercise to the reader.
Change-Id: Ifa1111900d6945ea8e05fffd177f1548c8c8e714
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit f20adcde30. The
implementation had the right idea, but this is not expected to work
reliably in C++. It's jumping out of several frames without cleaning
them out properly and our ASan-based memory leak-checker has started
complaining (the next commit will move this test elsewhere).
==19313==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 258 byte(s) in 1 object(s) allocated from:
#0 0x7ffa505c8e48 in __interceptor_malloc (/usr/lib64/libasan.so.5+0x109e48)
#1 0x7ffa4f2d7ff9 (/home/qt/work/install/lib/libQt6Core.so.6+0x896ff9)
#2 0x7ffa4f2d834d in QArrayData::allocate(QArrayData**, long long, long long, long long, QArrayData::AllocationOption) (/home/qt/work/install/lib/libQt6Core.so.6+0x89734d)
#3 0x7ffa4f23b700 (/home/qt/work/install/lib/libQt6Core.so.6+0x7fa700)
#4 0x7ffa4f1f6cc8 in QString::reallocData(long long, QArrayData::AllocationOption) (/home/qt/work/install/lib/libQt6Core.so.6+0x7b5cc8)
#5 0x7ffa4f1f68a7 in QString::resize(long long) (/home/qt/work/install/lib/libQt6Core.so.6+0x7b58a7)
#6 0x7ffa4f2092ff (/home/qt/work/install/lib/libQt6Core.so.6+0x7c82ff)
#7 0x7ffa4f209e09 in QString::vasprintf(char const*, __va_list_tag*) (/home/qt/work/install/lib/libQt6Core.so.6+0x7c8e09)
#8 0x7ffa4ed0d83d (/home/qt/work/install/lib/libQt6Core.so.6+0x2cc83d)
#9 0x7ffa4ed114a9 in QMessageLogger::fatal(char const*, ...) const (/home/qt/work/install/lib/libQt6Core.so.6+0x2d04a9)
#10 0x5641d2604c40 in tst_Silent::messages() /home/qt/work/qt/qtbase/tests/auto/testlib/selftests/silent/tst_silent.cpp:77
#11 0x5641d26050fb in tst_Silent::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) tests/auto/testlib/selftests/silent/silent_autogen/include/tst_silent.moc:118
The restoration of the signal handler (which QtTest now has) is also
wrong: this needed to use sigaction() instead.
Change-Id: Ifa1111900d6945ea8e05fffd177f14fbc09a1d7d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Nothing in those files uses QPair; and a local build finished fine without them.
Task-number: QTBUG-115841
Change-Id: I669cfecaa9129bce6b31e464826287f138b159db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test case is an incomplete version of the test that will be added to
verify the fix for the referenced bug report. The test crashes already
when showing the dialog without this fix.
Task-number: QTBUG-116277
Pick-to: 6.6 6.5 6.2
Change-Id: I969a723157f6453b78bafae5cb24a6b37b1eea50
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... to replace the old stateChanged(int) one, which a) had the wrong
name and b) the wrong argument type.
Mark the old one as \obsolete, so new users don't see it
anymore. Prepare for deprecation in the test, but don't actually
deprecate, yet (this author does not know how to deprecate signals).
Found in API-review.
Amends 37b47ebf94.
As a drive-by, replace explicit qWait() calls with QTRY_COMPARE().
[ChangeLog][QtWidgets][QCheckBox] Added new
checkStateChanged(Qt::CheckState) signal, obsoleting
stateChanged(int).
Fixes: QTBUG-104688
Change-Id: I01791fd003b752c47d99bea65151202be9175c21
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The palette set by windows vista style during polish doesn't allow style-
sheet style to override it.
This patch reset resolve mask for the palette set by windows vista style
and thus it can be overridden.
Fixes: QTBUG-115511
Pick-to: 6.6 6.5
Change-Id: Ifcaf441f806cfa0273599b3dce83fdfaec3f5a66
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
There was an extra `q` before dnslookup.
Found while trying to build tst_qdnslookup, the target wasn't seen by
CMake/Ninja.
Pick-to: 6.6
Change-Id: Id594aab30dc9081fc269541561e0f2db5e615657
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
See code review 496440 on Gerrit for the details.
Change-Id: Ibd32a44cf7e2e07f36687cc2f0eeaf3008f64e73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By saying what's special about some of them
Pick-to: 6.6 6.5
Change-Id: I17bf2e12a27bf55f621020ddf3819ee9e606847d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of adding it after the block size was calculated. This makes no
difference for non-growing (exact) blocks. For growing blocks, this
means we take that extra element into account before rounding to the
next power of two, instead of after. That results in a change of the
thresholds of when a block grows and also what capacity it will
contain.
For example, for a QString growing to 22-25 elements:
Request | Previously | Now |
elements | bytes | malloc()ed | capacity() | malloc()ed | capacity() |
22 | 44 | 66 | 24 | 64 | 23 |
23 | 46 | 66 | 24 | 64 | 23 |
24 | 48 | 66 | 24 | 128 | 55 |
25 | 50 | 130 | 56 | 128 | 55 |
To avoid wasting elementSize - 2 bytes in this footer, we only include
this footer if elementSize <= 2. Thus, for a QList<int> growing to 11-13
elements:
Request | Previously | Now |
elements | bytes | malloc()ed | capacity() | malloc()ed | capacity() |
11 | 44 | 66 | 12 | 64 | 12 |
12 | 48 | 66 | 12 | 128 | 28 |
13 | 52 | 130 | 28 | 128 | 28 |
In both cases, we now only allocate powers of two while growing, which
may be beneficial to some allocators.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177dcb96e251d0a1
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The SizeShift was not taken into account when constructing QASV from
QL1SV. This is not an issue in normal Qt builds, because SizeShift == 0
there.
But in bootstrapped case (and in future Qt 7) SizeShift changes to 2,
and the bug becomes visible.
The added test-cases do not really reveal the issue, because we do
not run tests in bootstrapped builds, but at least they will help
to prevent the issues in Qt 7.
Pick-to: 6.6 6.5 6.2
Change-Id: I337b37b5230323a5357f48fd1c9bf799ca507d52
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The pre-existing test for QLocalServer was testing only a minor subset
of cases, so replace it with the call to
QTestPrivate::testReadWritePropertyBasics.
The test for QLocalSocket's bindable properties was missing, so add
it.
The new tests didn't reveal any problems.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I695bb050d39eeae9ffb84c097c36601a4ca89af6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The pre-existing tests were not using the QTestPrivate helpers, so
extend them with the call to QTestPrivate::testReadWritePropertyBasics.
The updated test didn't reveal any problems with binding loops, so no
other action is required for now.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I51a17974a7f5bec3c969fcb55b6f28e3e9218eb5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The pre-existing tests were not using the QTestPrivate helpers, so
extend them with the call to QTestPrivate::testReadWritePropertyBasics.
The updated test didn't reveal any problems with binding loops, so no
other action is required for now.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I360614a40fe2bacb796051607ed67e7e666b4f22
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The bindable property tests were not using the QTestPrivate helpers, so
add a new test which uses them.
The new tests revealed a binding loop for the interval property.
Fix it in a usual way by explicitly removing the binding and using
{set}ValueBypassingBindings() in the setter.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: If94f57938da449a68e3527aead5ebd55ba410adb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The old tests were not using the test methods from QTestPrivate, so
add another test case.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I291ede26461e79a615630f1decad2ad7549b4dd8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
... by using valueBypassingBindings() when accessing the properties
from the setters.
This commit is mostly trivial.
Had to change the template parameters in the unit-test, because the
updated QTestPrivate::testReadWritePropertyBasics() creates an instance
of the TestedClass, and QAbstractProxyModel cannot be instantiated,
since it has pure virtual methods.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I0cae29263ea9bb92c9de06891b0ba8633fb9fd72
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The bindable property tests should use the helper functions from
QTestPrivate.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: Ie1a61ab80e6f737eac02246214c2c93129a1cf94
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Extend the unit-tests for bindable properties and fix the discovered
binding loop by using {set}ValueBypassingBindings() in the setter of
the duration property.
The code refactoring does not modify the setter logic, because
previously the binding was anyway implicitly removed when calling the
assignment operator. The updated code just does it explicitly.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I0f339d182efb60500ee7f12e407f200d739da312
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
libstdc++'s std::filesystem::path implementation incorrectly assumes
that any 8-bit char input is UTF-8, when it patently isn't on Windows.
Reported at https://gcc.gnu.org/bugzilla/show_bug.cgi?id=111244
Pick-to: 6.5 6.6
Fixes: QTBUG-116609
Change-Id: I2b24e1d3cad44897906efffd17803f2862935c9b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's very hard to debug a macro.
Pick-to: 6.5 6.6
Change-Id: I2b24e1d3cad44897906efffd17803b8eac9bd844
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Accessibility implementations rely on correct information about the
model dimensions when operating on item views. An item view that has a
root index set needs to report it's size based on the root index, rather
than for the view's model directly.
Pass the rootIndex to all calls to QAbstractItemModel::column/rowCount.
Refactor the code to avoid excessive dereferencing of a QPointer, apply
const and fix/improve coding style in touched lines.
Emit a ModelReset notification when the root index changes, or (in the
case of QListView) when the model column changes.
Split long Q_ASSERTs into multiple lines to be able to better trace the
exact reason for an assertion, and replace the assert with an early
return of nil when it's plausible that a cached cell is no longer part
of the view (i.e. because the root index changed).
Add a test case that verifies that changing the root index changes the
dimension of the view as reported through the accessibility interface.
Pick-to: 6.6 6.5
Fixes: QTBUG-114423
Change-Id: I7897b79b2e1d10c789cc866b7f5c5dabdabe6770
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Installing a second mimetype with *.txt as glob had a different
effect depending on whether it was installed into the same prefix
or a different prefix as the one where text/plain is installed.
Pick-to: 6.6
Change-Id: I7f54b8efe22f620eb57257745c48fe5402c87626
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextMarkdownImporter::import() took a QTD* as if it would be ok to
reuse one instance of QTextMarkdownImporter for repeated importing into
different documents; but in practice, we never do that: in fact it's
usually a short-lived, stack-allocated object, as in
QTextMarkdownImporter(&doc, QTMI::DialectGitHub).import(input);
So it's less clumsy internally to require the document be provided to
the constructor: that way a QTextCursor can be constructed immediately
too, as part of the importer object rather than separately on the heap.
This is private API, unused outside qtbase.
Change-Id: I8041ceb33cb7e7608df55dc5a963292c585afb90
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The 6.5 versions of the overload not taking a context/receiver object
were constrained by requiring a functor to be free function or lambda.
207aae5560 removed that constraint, which
might be source incomaptible if wrapper functions in user code forward
the constraint using Expression SFINAE. Those wrappers would no longer
be removed from the overload set based on the same criteria as the
function they wrap.
We can't constrain the new functions based on the same predicate as
before, as after the simplification we have only one overload with, and
one without context object. But we can still remove overloads for
incompatible functors.
Add the respective scenario to the QPermission test as a compile-time
test.
Found during 6.6 header review.
Pick-to: 6.6
Change-Id: Id21391b4a6b78a29de2f8fa04374f4262e5fafa7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
...to set m_o to nullptr and prevent an existing QSignalBlocker from
touching the QObject, which it was created for.
Add documentation and implement an autotest.
Change-Id: Ic18e80af5a57df1928f9d36aa0ab7ad79b6525fd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Private libraries were linked conditional to QT_FEATURE_private_tests in
the CMake file. qstatictext_p.h was included conditional to developer
build. A developer build fails, with test enabled and private tests
disabled.
=> Change the CMake condition to QT_FEATURE_developer_build, to resolve
mismatch between CMake and cpp file.
Pick-to: 6.6 6.5 6.2
Change-Id: I79213e7d3c38851b8b80cb8ab248d7bff750c227
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
QLabel *l is declared uninitialized, assigned in a for loop. The last
object is deleted for testing purposes.
This leads to a false compiler warning about deleting a potentially
unintialized pointer.
=> initialize with nullptr to silence the warning.
Pick-to: 6.5 6.6
Change-Id: I1422b04fc1fdbfc7248de577884aabfb539f3f4b
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Private libraries and WrapOpenSSL were linked conditional to
QT_FEATURE_private_tests in the CMake file.
qsslkey_p.h and open ssl symbols were included conditional to developer
build. A developer build fails, with test enabled and private tests
disabled.
=> Change the CMake condition to QT_FEATURE_developer_build, to resolve
mismatch between CMake and cpp file.
Pick-to: 6.6 6.5
Change-Id: I3ac93b02701e467a0b548c35d441d35a45c4568b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QItemSelectionModelPrivate::initModel() uses string based connections,
to connect/disconnet its QAbstractItemModel.
The QObject::destroyed signal is connected to modelDestroyed(), which
does not disconnect other signals.
QQuickTableView's selection model binds to its QAbstractItemModel.
The binding also reacts to QObject::destroyed
Eventually, QItemSelectionModel::setModel(nullptr) is called.
At this point, only a QOBject is left from the QAbstractItemModel.
That leads to warnings about disconnecting string based signals, which
belong to QAbstractItemModel.
This patch changes the connect syntax to the QObjectPrivate::connect
API. Instead of keeping a list of string based connections around, the
connections themselves are kept in a list member. Disconnecting happens
based on that list.
Connections are also disconnected in
QAbstractItemModelPrivate::modelDestroyed.
An auto test is added in tst_QItemSelectionModel.
Fixes: QTBUG-116056
Pick-to: 6.6 6.5 6.2
Change-Id: I57e5c0f0a574f154eb312a282003774dd0613dd6
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This functionality was lost when we switched to Catch2.
Change-Id: I2b24e1d3cad44897906efffd177fb4cff641546f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 118f2210c6. That commit added
#ifdef Q_OS_UNIX
if (test == "assert"
|| test == "crashes"
|| test == "failfetchtype"
|| test == "faildatatype")
return; // Outputs "Received signal 6 (SIGABRT)"
#endif
Which duplicated 4 out of the 5 tests in the block:
#ifdef Q_OS_LINUX
// QEMU outputs to stderr about uncaught signals
if (QTestPrivate::isRunningArmOnX86() &&
(test == "assert"
|| test == "crashes"
|| test == "faildatatype"
|| test == "failfetchtype"
|| test == "silent"
))
return;
#endif
But as Linux is Unix, we never got to that second block for those 4
tests.
Pick-to: 6.6
Change-Id: I2b24e1d3cad44897906efffd177fb4b5507d190a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QString::fromJsString -> QString::fromEcmaString()
QString::toJsString() -> QString::toEcmaString()
For API naming compatibility with QByteArray::fromEcmaUin8Array()
Pick-to: 6.6
Change-Id: If6e2121e31e630d6728ed24e41d14b763f395aaa
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
QWidget already handles this, but it might be useful for non-Widget
object hierarchies as well, such as in Qt Quick.
The flag is opt in, and as QWidget already handles these events by
itself (without checking any flags), we assert that we don't end up
in this code path, instead of enabling it for QWidget. The latter
would mean refactoring the QWidget code, with possible regressions.
Docs and header comments have been updated to reflect that this
event is not widget specific. (This is an issue with other events
as well, that are documented to say "widget", since they came
from a time when there was only QWidget, but nowadays apply to
e.g. QWindow as well. That's something for another fix though).
Change-Id: Ib71962131d6011c17dcce8c01bd8adcdaa58d798
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
OpenSSL 3.1.2 can be configured with no-deprecated option, in this
case test fails to build.
Pick-to: 6.6 6.5 6.2
Change-Id: Icaf457f55fb001b632922856dbe4bbb5bdba220e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's currently conditional on two features used in QNetworkInterface.
The fact that QNetworkInterface misses those two features is probably
correlated to the failures observed on QNX, but is not the cause, so
this code was actually wrong and was possibly disabling the execution of
similar content on other OSes.
Therefore, this commit removes them and changes the conditional to
exclude the OS that is failing (QNX).
I find this situation unacceptable. IPv6 support is mandatory for any
application after 2011-01-31, the date when IANA delegated its last IP
block, and definitely after 2019-11-25, when RIPE NCC ran completely
out. But since there's no SDK available for it, I'll grudgingly accept a
grandfathered exception because there's nothing I can do about it (I
tried to fix it; look at the change history of this patch set). I will
block any new OSes in that situation, though.
Task-number: QTBUG-116503
Change-Id: Ifa1111900d6945ea8e05fffd177ed6979c3e5916
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Let's do it in initTestCase(), where we're already searching for IPv6
addresses, instead of storing the information in a local static.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177efb6a055aaa58
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This was disabled in d0d1d74033, I guess
accidentally, by a too-wide conditional. The change the same commit
applied to QtNetworkSettings didn't make the same mistake.
I am also opportunistically updating the conditional to QT_CONFIG (I
missed this in 9d4579c1cd) and adding the
Linux-specific check, as the AF_NETLINK implementation does not rely on
getifaddrs() or if_nametoindex().
Drive-by fix indentation.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177ef8fcb11b4e1e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
