Ensure that it's safe to call readAllStandardError()
when process channel mode is set to MergedChannels.
Pick-to: 6.3 6.3.0
Task-number: QTBUG-102177
Task-number: QTCREATORBUG-27196
Change-Id: I01073255d9347dee4654d602802a12d341372b73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On 32-bit platforms, the range of qsizetype is smaller than the range
of the qint64 used as a parameter in seek().
When seek()ing beyond the current buffer's size, the old code relied
on a write() to fill the gap with NUL bytes. This has two problems:
First, this may allocate a huge amount of memory just to find that it
cannot write that much, possibly even taking the program down when the
allocation in the QByteArray ctor fails, instead of returning false from
seek().
Second, the QByteArray ctor to which we pass the gapSize only takes
qsizetype, not qint64, so we were writing data of size gapSize mod
(INT_MAX+1) on 32-bit platforms, which may succeed, just to find that
that wasn't the number of bytes we expected to be written. By that
time, however, the internal buffer has already been enlarged.
Fix by checking whether the desired seek position is within the limits
that QByteArray can contain early on, before attempting to construct
such a large QByteArray.
[ChangeLog][QtCore][QBuffer] Fixed silent data corruption on 32-bit
platforms when seek() fails due to position > INT_MAX.
Pick-to: 6.3 6.2 5.15
Fixes: QTBUG-102274
Change-Id: Ib63cef7e7e61ef8101a5f056c7b2198bb7baa228
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 6, QByteArray can hold more than two GiB of data on 64-bit
platforms, so QBuffer should be able to handle writes of more than two
GiB, too. But the implementation didn't check for overflow and held
sizes in int variables, so it happily reported success but wrote data
only mod INT_MAX.
Fix by carefully avoiding overflow and using size variables of proper
type.
[ChangeLog][QtCore][QBuffer] Fixed silent data truncation when writing
more than two GiB at once on 64-bit platforms.
Pick-to: 6.3 6.2
Fixes: QTBUG-102171
Change-Id: Ib666f9f7db24495b4ed64191a48b35edc410f7e9
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of QSKIPing the whole test, ignoring what was already tested
Change-Id: Iced928ce1bce92b447c8698a9942973cb78b6c15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Two methods of the private class used to take a QByteArray with from
and to indices into it, for where to start and stop a scan. Now that
they take a QByteArrayView, those parameters can be used by the caller
to shorten the view to the desired portion.
Change-Id: Id1586afb87a9e8a189b69e485278375ff504fb7b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The tests started failing for some reason, so blacklist them to
unblock the CI.
Task-number: QTBUG-102095
Task-number: QTBUG-102096
Change-Id: I3e0667581bb1a9fd08dedcdab08878b1f738ac92
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: Idf7e99c19ab630065b651f2f6d957311f45f0db7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... in preparation for replacing the QString keys in the public API
with QAnyStringView ones.
This removes the "important optimization" that avoids a detach in the
common case where the input is the same as the output of
normalization. But that optimization is beside the point, because it
trades a memory allocation avoided in the library for O(N) allocations
inserted into user code for each call to QSettings::value(), the vast
majority of which are calls with string literals.
With the public interface ported to QAnyStringView in the follow-up
patch, we can then internally optimize memory allocations _in a central
place_ (e.g. by returning std::u16string or QVarLengthArray<QChar> from
normalizeKey() instead of QString). But first we need to get rid of all
the unwarranted allocations in user code.
Change-Id: I45fc83d972c552a220c9c29508001d3f172e1162
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Add move constructor and move assignment operator.
To allow for the the change to be implemented QTemporaryDir, the
internal d_ptr was modified from a QScopedPointer, which is not movable,
to a raw pointer.
Add member + free swap implementations.
Add tests.
[ChangeLog][QtCore][QTemporaryDir] Enabled move semantics.
Change-Id: I9f196a77c70b4ca0b7f0c06505d00fdd87a9785c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
RFC2397 doesn't explicitly mention it, but references RFC2045, which,
in Section 2, states:
> All media type values, subtype values, and parameter names as
> defined are case-insensitive.
and goes on, in 6.1:
> mechanism := "7bit" / "8bit" / "binary" /
> "quoted-printable" / "base64" /
> ietf-token / x-token
>
> These values are not case sensitive
So regardless of whether "base64" is a parameter name, or a mechanism,
we need to treat it case-insensitively.
Use QLatin1String::endsWith() instead of QByteArray::endsWith(),
because the former takes Qt::CaseInsensitive while the latter would
need a toLower().
Add a test.
As a drive-by, use the same trick for the existing case-insensitive
comparison with "charset".
As a further drive-by, fix inappropriate uses of QLatin1String (=
where they don't prevent allocations).
[ChangeLog][QtCore][QUrl] Now recognizes the ";base64" marker in
"data:" URLs case-insensitively.
Pick-to: 6.3 6.2
Change-Id: Ife6ba771553aaad3b7c119c1fa631f41ffa8f590
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to mark the corresponding QColor ctor(s) explicit.
Use Qt::GlobalColor or the new QColor::fromString() instead.
Change-Id: I68bf75a094e6821b97682de5a0ffd975834d22d0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
[ChangeLog][QtCore][QSettings] The INI file reader now supports
keys encoded with UTF-8, as well as the %-encoded format. Writing
the keys back to the INI file is still done using %-encoded format.
This change does not touch the way the *values* are handled - they
are both read and written in UTF-8.
Drive-by: remove misleading comments from the reading algorithm.
Task-number: QTBUG-99401
Change-Id: I6a83cbf24d919a499540403688615f93cb195e93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove Integrity and Android specific code that explicitly adds
test data to the resource files. qt_internal_add_test functions
implicitly adds test data to resources for Android and Integrity
platforms by default.
Change-Id: Ia1d58755b47442e1953462e38606f70fec262368
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unless "." (or the empty string) is in $PATH, we're not supposed to find
executables in the current directory. This is how the Unix shells behave
and we match their behavior. It's also the behavior Qt had prior to 5.9
(commit 28666d167a). On Windows, searching
the current directory is the norm, so we keep that behavior.
This commit does not add an explicit check for an empty return from
QStandardPaths::findExecutable(). Instead, we allow that empty string to
go all the way to execve(2), which will fail with ENOENT. We could catch
it early, before fork(2), but why add code for the error case?
See https://kde.org/info/security/advisory-20220131-1.txt
[ChangeLog][Important Behavior Changes] When passed a simple program
name with no slashes, QProcess on Unix systems will now only search the
current directory if "." is one of the entries in the PATH environment
variable. This bug fix restores the behavior QProcess had before Qt 5.9.
If launching an executable in the directory set by setWorkingDirectory()
or inherited from the parent is intended, pass a program name starting
with "./". For more information and best practices about finding an
executable, see QProcess' documentation.
Pick-to: 5.15 6.2 6.3
Change-Id: I54f205f6b7314351b078fffd16cf7013c97ee9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use alternative method for finding searchPath since
QT_TESTCASE_SOURCEDIR did not point to a correct location on webOS
QEMU test environment.
Fixes: QTBUG-99954
Pick-to: 6.3
Change-Id: I05f95b4aa02027976036d0842ca564a602e01d0e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The test was already blacklisted for Windows 10 and Windows 7. Now it
is flaky on Windows 11 as well.
Blacklist it for all windows platforms.
Task-number: QTBUG-98478
Pick-to: 6.2 6.3 5.15
Change-Id: I870fb6ce80cfe244a76d08bf40677fdb6becab97
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
- There is no mounted partition, where we can create/delete files at runtime.
Tests should be excluded for now.
Pick-to: 6.2 6.3
Change-Id: I1c4db13d35da7d570c4bf787299d829e08951195
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When fallbacks are disabled for QSettings then it should not be
falling back to any child groups or keys that might exist in a
fallback set of settings.
Fixes: QTBUG-85295
Change-Id: I563999293a103702035c8d3b027b59b94ca43c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
memcpy() mustn't be called with a nullptr, even if the size is zero.
Fixes ubsan error:
tst_qiodevice.cpp:561:15: runtime error: null pointer passed as argument 1, which is declared to never be null
Even though ubsan only complained about one of them, fix all three
occurrences of the pattern in the test.
Pick-to: 6.3 6.2 5.15
Change-Id: I5c06ab4a20a9e9f8831392c46c6969c05248fdac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Large amount of threads is unstable and do not finish in given time
Pick-to: 6.2
Change-Id: I0ce4c8cd278d6611c9e9da7326048279ccc458fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also change usage of QDir::currentPath to QDir::tempPath
instead as QNX tests are run on CI at qemu over NFS.
Pick-to: 6.2
Change-Id: I2e1d6629299acd125117bcce90320c70eeb4a1a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modify similar like is used for Windows
Pick-to: 6.2
Change-Id: I133a8dde2e78cc66aa9544246cd750a6543b4883
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new overload allows creation of files with non-default permissions.
This is useful when files need to be created with more restrictive
permissions than the default ones, and removes the time window when
such files are available with less restrictive permissions.
[ChangeLog][QtCore][QFile] Added QDir::open() overload that
accepts permissions argument.
Fixes: QTBUG-79750
Change-Id: Iddfced3c324e03f2c53f421c9b31c76dee82df58
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The new argument allows atomic creation of files with non-default
permissions.
Task-number: QTBUG-79750
Change-Id: I4c49455b41f924ba87148302c8d0f77f5de0832b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch adds an overload of the QDir::mkdir() method that
accepts permissions. This allows setting of the directory
permissions at the time of its creation.
[ChangeLog][QtCore][QDir] Added QDir::mdkir() overload that
accepts permissions argument.
Task-number: QTBUG-79750
Change-Id: Ic9db723b94ff0d2da6e0b819ac2e5d1f9a4e2049
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
MSVC 2022 (17.0.0) complains about "'QString::replace':
12 overloads have no legal conversion for 'this' pointer".
This is a compiler bug. It is reported to MS. Still we workaround
it here so that qtbase can be built with MSVC 2022.
Pick-to: 6.2
Task-number: QTBUG-96975
Change-Id: I0180e2e6760d2809ca61e3cd8f02b04f970172a7
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation for QProcessEnvironment's default constructor
says:
This constructor creates an empty environment. If set on a
QProcess, this will cause the current environment variables
to be removed.
This is not the case however, because setting such an environment
for a process is equivalent to not setting an environment at all
and the child process is executed with parent's environment.
It is still possible starting from Qt 6.2.0 to create an empty
environment by adding a variable to a null environment and removing
it, but that's cumbersome, and the comparison operator says that
it is equal to the null environment but it is obviously behaving in
a different way.
This change adds an additional constructor to QProcessEnvironment
that can be used to construct a null environment, and changes the
default constructor to produce an empty environment. The comparison
operator is changed to correctly distinguish between such objects.
This is a behavior change, but the current behavior is broken
and this is unlikely to affect working code.
[ChangeLog][QtCore][QProcessEnvironment] An additional constructor
was added to explicitly create an object that when set on QProcess
would cause it to inherit the environment from parent (this was
formerly the behavior of a default-constructed QProcessEnvironment,
which will now (as documented) actually give a process an environment
with no variables set). A new method inheritsFromParent() was added
to test for such objects.
Fixes: QTBUG-58053
Change-Id: I15e20c6a5f01ebe2c736d5578c75dba1ee319320
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove at() and chmod() methods of MyEngine class. Those methods
are not used anywhere and look like remainder of old API to me.
Change-Id: I754a4281124cb8c9d74e79a9a2b99fb1b1f41e52
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove useless overrides of QAbstractFileEngine methods from the derived
classes. Also remove "This virtual function must be reimplemented by
all subclasses" passages from the QAbstractFileEngine's documentation.
There are pure virtual methods for such use cases. QAbstractFileEngine
already contains useful defaults for classes not supporting all the
functionality.
Change-Id: Ia25965854f3809b15d7502da3749cc2f3414bbc3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing symLinkTarget() always resolves the symlink
target to an absolute path; It will be clearer to change
LinkName to AbsoluteLinkTarget. It is ready for the commit
about add symLinkPath() to read the raw link path.
Fixes: QTBUG-96761
Change-Id: I8da7e23b066c9ac1a16abb691aa1c4a5f1ff8361
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Wang Fei <wangfeia@uniontech.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On macOs with APFS mkdir sets errno to EISDIR, so take the error code
into account.
Pick-to: 6.2
Fixes: QTBUG-97110
Change-Id: I8e7d10c95430a2802bdbfbf94dd65219bd9071a7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Commit ed48391c59 removed the check for
ERROR_ACCESS_DENIED reported by the Windows CreateDirectory(...)
function in case an existing windows drive name was passed as argument.
This restores the behavior of the function which broke after 5.15.
Pick-to: 6.2
Fixes: QTBUG-85997
Change-Id: Ie86188100766f7364acee57b15a250f4a2720b9f
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
This corresponds to Unicode version 14.0.0.
Added the following scripts:
* CyproMinoan
* OldUyghur
* Tangsa
* Toto
* Vithkuqi
Full support of these scripts requires harfbuzz version 3.0.0,
this version adds support for Unicode 14.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/3.0.0
With this release 10 test cases in tst_qurluts46 were fixed, one
additional test case is failing in tst_qtextboundaryfinder and
is commented out. In total 62 line break test cases and 44 word
break test cases are failing.
A comment in src/corelib/text/qt_attribution.json was updated to
include the URL of the page containing UCD version number.
Fixes: QTBUG-94359
Change-Id: Iefc9ff13f3df279f91cbdb1246d56f75b20ecb35
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- getgid/getpwuid are not supported
- process should be used with config check
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: Ib6854772bcf52f3533cb722f963426717926258b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- getgrgid/getpwuid are not supported
- the default constructor of "ObserverOrUninit" must be referenced for GHS compiler
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I24093da76e116aba4b87a8f5c5763b03d082a2cd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In addition to checking the .lnk extension, check that the
the specified path is not a path to a directory.
Pick-to: 6.2
Fixes: QTBUG-85058
Change-Id: I83cef3d94c6ffa82a88f374c5b41779e88fe40b8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This reverts commit efb90f6e7e.
Reason for revert: behavior change for signal listeners
Change-Id: Ibe3c5d496cd61a9fccab17a10cc9fda8334fc9d4
Reviewed-by: Björn Schäpers <qt-codereview@hazardy.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>