We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This method should not ignore accessibility objects without
corresponding widget. The widget may have parts with their own
QAccessibilityInterface and these can be also focused.
VoiceOver ignores them if they are not returned by focusChild().
QAccessibleTabBar::focusChild() has been implemented to demonstrate
the concept and make tab titles of QTabBar readable by VoiceOver.
Task-number: QTBUG-78284
Change-Id: Id7c62d86154bbd5d47d6bbee8cb7d05268c2e151
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This patch aims to implement the session management available on macOS.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Fixes: QTBUG-33034
Change-Id: Id5d7416cb74c762c5424a77c9c7664f0749da7f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some structures needed to be cleaned for the reuse to be safe.
Reusing it cuts down on the overhead in lancebench.
Also uniqueness of block names are now enforced, and the common pattern
of "end_block blockName" could now be parsed if not always commented
out by begin_block handling.
Change-Id: I0daf6445292383aaab9392550d0842e0a654ad27
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Thanks to Dmitriy Purgin for pointing out the serialization one.
Task-number: QTBUG-79353
Change-Id: Ia3d750b17ddd8fbb7a83a55df7e4546ca78c358b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It seems like qmake is happy with the comment, followed by a
continuation and then another comment, but having the continuation at
the end of the line makes more sense.
This will make it easier to port to CMake.
Change-Id: I20c964e8c3b6fea4745095783503045b191b000b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Is't been deprecated since Mac OS X 10.5.
Task-number: QTBUG-74872
Change-Id: I8b1ad7aca6448883cb164fd0c4b329592ca60548
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In QPainter, there is a shortcut code path for the drawImage(point,
image) call, relative to the full drawImage(targetRect, img,
srcRect). The lance script interpreter would only use the latter, so
the former was not covered by the tests.
As a driveby, remove the pointless usage of non-default dithering
flags in drawImage(), since it is more important to test the default.
Change-Id: Id373fd528a0c4c40b6bd8eea37b960fd7cdb2cc7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The benefit of keeping this code around was to inspire or inform
changes in the areas to take into account possibly missing features
in Qt 5, but at this point that benefit is questionable. We can
always use the history to learn about missing pieces if needed.
Change-Id: I87a02dc451e9027be9b97554427bf8a1c6b2c025
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This happened to work by chance, as QList::insert() would
gracefully handle out of bounds insertions.
Change-Id: I7ee1e645ed9a538946a509957ce5155641ffea1d
Reviewed-by: David Faure <david.faure@kdab.com>
Don't manage the ref-count yourself, as this requires the code to use
the QAtomic copy ctor, which we want to remove going forward. Using
QSharedData, we can let the compiler write the code for us.
Since 'ref' this way moves to the first spot in the list of effective
members, creating a 4B hole between itself and 'msecs', swap 'status'
and 'msecs' to fill the hole:
offset: 0 8 16 24
| | | |
without v v v v
adj.mnt: |*R*| | msecs | S | U | TZ....
before: | msecs | S | U |*R*| | TZ...
after: |*R*| S | msecs | U | | TZ....
This keeps the padding out of the critical first word, which improves
latency. That said, for accessing the members the old layout surely was
optimal. This layout optimizes copies and pessimizes access to 'msecs'
on 32-bit platforms without the Critical Word First optimization.
Requires adjustments to tst_toolsupport and the qhooks version.
Also default members using NSDMI, consequently drop the manual default
ctor.
Change-Id: I3c48e68694ad29b28a13aa47ea0f283fae52edd7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There's no use of QRegExp here therefore remove the include
Task-number: QTBUG-72587
Change-Id: If281c34d202c9fae4e548c8293443cc0dc283de0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
Note that the test is still disabled, but this is needed in any case.
Change-Id: Ib7523ba800b94c32690c1bd09b23fc2078c71d4e
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have been rather sloppy in how read-only versus editable is handled.
According to the definition, editable signifies that in principle a
widget allows the user to change its text. Read-only means that this
ability is (currently) disabled.
Task-number: QTBUG-75002
Change-Id: I5d71843abcdaac52f4a60a1abcac2604341f6c96
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The full stroker does not produce good results for aliased lines
thinner than 1 pixel. Avoid it by making sure that such thin lines
are painted by the cosmetic stroker, even when they have
non-uniform transformation.
Fixes: QTBUG-73866
Change-Id: I7b5f0fa555903246e0c3fd92cd435cc8c0b15a24
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The code for generating round line joins is optimized with a shortcut
for the inner, normally invisible joins. For certain joins of a
tightly turning bezier, this optimization would lead to visible
painting error. Fix by avoiding the optimization if the next control
point is so close as to allow such tight turns.
As a driveby, make the angle > 90 test cheaper, since absolute
precision is not required in the optimization choice.
Fixes: QTBUG-75008
Change-Id: I293e0776003310dc36fa7f43fbcd9c25f1f8fa5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
... except where they are actually the component under test.
Java-style iterators are scheduled for deprecation.
Change-Id: If4399f7f74c5ffc0f7e65205e422edfa1d908ee8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some directories that depend on QtGui were being included without the
appropriate check for qtHaveModule(gui).
Change-Id: I7c348c74464d44cbd35a027f188f8a23bb2021d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Our implementation of compose table parser was added on Mar, 2013.
libxkbcommon added APIs for the same thing in Oct, 2014 (ver: 0.5.0).
After removing RHEL 6.6 from the list of supported platforms we were
able to move the minimal required libxkbcommon version to 0.5.0. Now
we can use the xkbcommon-compose APIs on all supported platforms.
With this patch we can drop nearly 1000 lines of maintenance burden.
This patch fixes user reported issues with our implementation.
Known issues:
- Testing revealed that xkbcommon-compose does not support non-utf8 locales,
and that is by design - https://github.com/xkbcommon/libxkbcommon/issues/76
Our implementation did work for those locales too, but it is unclear
if anyone actually uses non-utf8 locales. It is a corner case (work-arounds
existing) and likely a configuration error on the users' system.
- Looking at the release notes for versions above 0.6.1, only one issue
that stands out. Compose input does not work on system with tr_TR.UTF-8
locale, fixed in 0.7.1. Compose input works fine when using e.g. en_US.UTF-8
locale with Turkish keyboard layout.
Note:
With Qt 5.13 we have removed Ubuntu 16.04 and openSUSE 42.3 from CI:
Ubuntu 16.04 - 0.5.0
openSUSE 42.3 - 0.6.1
CI for Qt 5.13 has:
Ubuntu 18.04 - 0.8.0
RHEL-7.4 - 0.7.1
openSUSE 15.0 - 0.8.1
Currently the minimal required libxkbcommon version in src/gui/configure.json
is set to 0.5.0, but we could bump it to 0.7.1 to avoid known issues from above,
but that is a decision for a separate patch.
[ChangeLog][plugins][platforminputcontexts] Now using libxkbcommon-compose
APIs for compose key input, instead of Qt's own implementation.
Fixes: QTBUG-42181
Fixes: QTBUG-53663
Fixes: QTBUG-48657
Change-Id: I79aafe2bc601293844066e7e5f5eddd3719c6bba
Reviewed-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
