When focus is put back onto an itemview and the current item is editable
then the WA_InputMethodEnabled attribute should be set. Likewise this
should be set/unset when the current index changes too, depending on
whether the index is editable or not.
Change-Id: Iaea075e669efd21bdaa89a49c500c449272d098b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Change-Id: Iffb81a37a517e58d48757d82f93f20e8c5100033
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
One example is VxWorks.
Change-Id: I253df715a9417c1f9cede79b1e1860924e0da8a9
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Looks like whoever created the blacklist never tried to figure out why
it happened.
Change-Id: I84e45059a888497fb55ffffd14d2fb29e32a4521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtCore][QFileInfo] Relative symbolic links on Windows are
now resolved to their absolute path by symLinkTarget().
Task-number: QTBUG-62802
Change-Id: I5826517130bd389aef994bf3f4b6d99b2a91b409
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since MSVC doesn't have <chrono> (according to QT_HAS_INCLUDE), the QSKIP
in the test was printed for every line in the table. Instead, add the
skip in the _data() function.
Change-Id: I6e9274c1e7444ad48c81fffd14dbcee5e5a322aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit 3d5bf00f18.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: I9f1c88606c97afc5952af34e04310612b783a9c2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Consider the following:
/root/target - a file
/root/path/link -> ../target
/root/path/other/exe - executable
Running from /root/path/other.
exe is:
#include <QDebug>
#include <QFileInfo>
int main()
{
qDebug() << QFileInfo("../link").symLinkTarget()
return 0;
}
The link references /root/target, but the current output is
/root/path/target.
The link doesn't depend on the PWD. It depends on its own directory.
Change-Id: I61e95018154a75e0e0d795ee801068e18870a5df
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When calling resize() from showEvent(), we'd set the full geometry
on the widget's QWindow. This resulted in the top-level window
being moved to the top-left corner, even though no other call to
move() or setGeometry() had happened before.
The solution consists on calling the proper QWindow methods depending
on whether setGeometry_sys() is called for a move, a resize or both.
Furthermore, this needs QWindow::resize() to set its position policy
to frame-exclusive. The documentation states that is already the case
and we're setting the full geometry on the platform window, so we need
to convey that bit of information.
This also solves the age-old conundrum: "### why do we have isMove as
a parameter?"
Change-Id: I2e00fd632929ade14b35ae5e6495ed1ab176d32f
Task-number: QTBUG-56277
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Speeds up testing by a factor of 2.
Task-number: QTBUG-61827
Change-Id: I9d6c9d9786d35af3083bc7e98beb9a79dbcc7e11
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Unsetting the SOFTWARE environment variable will force lpstat to use
English for the output, so we can ensure that the test will pass
regardless of the language used for the machine.
Change-Id: Iddf5e8aadaa546ae3e0dd172df84e4e43ee02c2a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Introduce helper function which uses a number to build
unique names. Remove helper for deleting files since it
now uses a temporary directory. Add a few cases
that were overlooked in 88c68f4d9e.
Task-number: QTBUG-61827
Change-Id: I53355f99ffc3bfe6ad6994a5439710c9fa8cdad5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The only reason our code wants PKCS12 files is for a private key, but
a valid file needn't contain one; and reading a file without lead to a
crash in QSslKeyPrivate::fromEVP_PKEY(). So check for missing key and
fail the load, since the file is useless to us. Also ensure the
caller's pkey is initialized, as we aren't promised that
PKCS12_parse() will set it when there is no private key.
Add a test for this case (it crashes without the fix) and update the
instructions for how to generate test data to cover it also.
(Corrected the wording there, too; at the interactive prompt,
"providing no password" really provides an empty password.)
Task-number: QTBUG-62335
Change-Id: I617508b903f6d9dee40d539b7136b0be8bc2c747
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Although the window is refused input for the most part from the system,
it does not act like that it is blocked by the application modal dialog.
This ensures that it is the case and prevents things like being able to
double click on the title bar to maximize the window on Windows.
Task-number: QTBUG-49102
Change-Id: If1582819b90cb2ec9d891f664da24f13bfec7103
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Added binary compatibility files for Qt 5.9.0.
'QOpenGLExtraFunctionsPrivate::Functions' and
'QOpenGLExtraFunctionsPrivate' have been blacklisted in
qtqa/tests/postbuild/bic/tst_bic.cpp, because those give false
positive fail in the binary compatibility tests.
Change-Id: I2231daef61a0c4677af36c85575b8dcd81070d44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLineEdit with a mask does not return empty fields with the
ImSurroundingText query. This is a problem for the input
context that is not aware of the mask and relies on the
fact that the cursor position never exceeds the boundaries
of the surrounding text.
This change fixes the issue by returning unmasked text with
the ImSurroundingText query.
[ChangeLog][QtWidgets][QLineEdit] Fixed behavior of the
ImSurroundingText query. Previously, it returned a masked
text whose length may be less than the cursor position.
Now it returns unmasked text, so the text length is always
greater than or equal to the cursor position.
Task-number: QTBUG-60319
Change-Id: I1c8009164836a1baa2e3a45958bf1ea5fa9be38d
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The test verifies that a cookie with a date in the future is not
"expired" and will be sent to the server. This test started failing
on August 7th 2017 when the test case "0003" with it's cookie expiring
August 7th 2017 started ... expiring ;-)
Bumped all suspicious cookie test cases by a hundred years.
Change-Id: I7c09069ec4999e2ea0aae7b2a2819cced0fd6a99
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The blacklisting is not needed anymore as we now use -qt-harfbuzz.
This reverts commit b36e5faad4.
Task-number: QTQAINFRA-1363
Change-Id: I3ae50588204b27e6880416ae2cbc28dda53bb292
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Added flowId='name' to each message when using TeamCity logging format.
This is necessary to distinguish separate processes running in parallel.
[ChangeLog][QtTest] Added flowId to messages when logging in TeamCity
format. FlowId is used to distinguish logging from multiple processes
running in parallel.
Change-Id: I7f5046c1058ff02770404caa2c9b3a5398f97f6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If in a slot connected to QAbstractItemView::clicked
QAbstractItemView::setModel(nullptr) is called the method
QAbstractItemView::mouseReleaseEvent will cause a segmentation fault.
The problem is that the method QAbstractItemView::model used in
QAbstractItemView::mouseReleaseEvent will return a nullptr if a null
model was set. The solution is to used d->model since it is always a
valid model. (See line d->model =
(model ? model : QAbstractItemModelPrivate::staticEmptyModel());
in method QAbstractItemView::setModel)
Change-Id: I6f01bdeac64495ee4a76adcc7bf8da8a7719ef4d
Reviewed-by: David Faure <david.faure@kdab.com>
- Determine window sizes according to screen size and turn off
scrolling.
- Center the window to get it out of the way of taskbars.
- Make the window top-most.
- Turn off scaling so that coordinates passed to the QWindow
child match device coordinates and the child is positioned
correctly.
- Make the child window a yellow raster window for easier
debugging.
Task-number: QTBUG-45956
Change-Id: I05864770f8ed638d0a36f3e3f2afed73d2952436
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_qgraphicswidget::checkReason_ActiveWindow fails on Windows 10
Creators Update. Added expect fail for Windows platform.
Task-number: QTBUG-62244
Change-Id: I71868a496659e7136af9a5b74684ba39edaf03ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This workaround was created to make tst_qfocusevent test pass on Windows
10 x64 Creators Update.
Task-number: QTBUG-61467
Change-Id: I63eb149ae850174fb5de99761a6001e000a151a2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
don't try to execute a binary from the install dir.
amends 8e776d39f.
Change-Id: I37990bc83b295379f0c93f4ca712e1bbf980fd44
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The image appears to be 128x128. Fixes test failures
FAIL! : tst_QImageReader::readFromResources(rect.svg) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
.\tst_qimagereader.cpp(1493) : failure location
FAIL! : tst_QImageReader::readFromResources(rect.svgz) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
which likely do not show in the CI since the qtsvg module is not
available when checking only qtbase.
Change-Id: I84ebdde6f2251f56a00f16a54bd20d0c2b23638e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Commit 9e64fc9e1c caused a regression
which stored all QDateTime entries as if they were in localtime,
which causes them to be offset by the amount of local timezone
offset. This is fixed by adding "Z" if the time should be in UTC or
using "+/-hh:mm" if it should use fixed UTC offset or specific
timezone.
Task-number: QTBUG-57138
Change-Id: Ie60905dfb3a517db442b636ca41daf8348753d84
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When ::WSAIoctl() reports 1 byte available for reading, we are trying
to peek an incoming datagram to ensure that the data is actually
delivered. But, according to MSDN docs, we are not allowed to pass NULL
as 'lpNumberOfBytesRecvd' parameter to ::WSARecvFrom() call, if
'lpOverlapped' parameter is also NULL.
The case with an empty datagram is fixed accordingly.
Change-Id: Id13038245332d3fb4bc18038d44a7cfd7ce04775
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Split the test in two: one test that requires the symlinks
and test files and one that does not need them.
In the test with test files, verify each step and the deletion
of the files.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I14de57ce7a1df2d834d5a7565c804dead1d89088
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is just wrong.
It suggests, that it tests minimal block size,
but in reality it is checking if a maximal peak of block size
is bigger then expected minimum block size.
The minimal block size is 1, not 1024 / ideal threads count and
it is defined in BlockSizeManagerV2.
The maximal block size is defined and it is fixed, but it is an
implementation detail, probably not worth testing.
The test is based on a race condition as peakBegin and
peakBlockSize are modified in parallel from multiple threads,
without any synchronization.
Change-Id: I430eedcf83b0fa3e2ce2cfd294eaee7b301e48ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Passing a null pointer as a parameter to the setChild function no
longer crashes when calling the
QStandardItemModelPrivate::itemChanged signal. The child is removed
from the model.
The patch also fixes the behavior of deleting a item. A
dataChanged signal is emitted.
Change-Id: I027e8b0d84fe33c5fca056df870f0e60a020824b
Reviewed-by: David Faure <david.faure@kdab.com>
This reverts commit 346cd79192. The bug
report was incorrect, since the suggested file name is actually valid,
it just happens to name an Alternate Data Stream (ADS) "20:803Z.txt" in
file "testLog-03".
[ChangeLog][QtCore][QFile] Reverted an incorrect change from Qt 5.9.0
that forbade the creation and access to Alternate Data Streams on NTFS
on Windows. This means that file names containing a colon (':') are
allowed again, but note that they are not regular files.
Task-number: QTBUG-57023
Change-Id: I81480fdb578d4d43b3fcfffd14d4f2147e8a0ade
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The test is marked as expected failure for the last 3 years, in CI it
is proven to be somehow flaky and it is failing now because of XPASS
which is not covered by blacklist feature.
This patch extends efforts of 7eba6d039d
and 03b4838cb5 by blacklisting the test
completely.
Change-Id: Ia295d61620fa6bc97b168d4de9456a18ed5c064f
Task-number: QTQAINFRA-1333
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Currently QLocale::c().bcp47Name() returns "C" which, according to [BCP47], is
not a valid language tag. In particular it does not conform to the ABNF grammar
in section 2.1 which specifies a minimum length of 2 characters for all language
tags.
[BCP47]: https://tools.ietf.org/html/bcp47
This patch changes the return value to "en" seeing as the documentation for
QLocale::Language states that the C language is identical in behavior to
English.
Task-number: QTBUG-61949
Change-Id: I2a381def8fb7156467e01d105da92bb1f4821204
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
internalInsert() will set the cursor to the right position which accounts
for any input mask set on the control as well. Therefore it will already
be placed at the next correct position and should not be changed again
after that.
Task-number: QTBUG-40943
Change-Id: Ic0f5fad6999ddd367e435ec4409a5db5b9eacb7b
Reviewed-by: Daniel Teske <qt@squorn.de>
Reviewed-by: David Faure <david.faure@kdab.com>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Verify that all pixels of the grabbed image are green instead
of comparing an image loaded from file.
The test then also passes when High DPI scaling is active in
which case a twice as big pixmap with DPR=2 is obtained when
grabbing the widget.
Change-Id: Ie5244a39a68ea0defd2590cf30f251d660d0869b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This removes a lot of duplicated code that existed in both qglobal.cpp
and qsystemerror.cpp, including the hack to get the correct strerror_r
signature.
This removes the incorrect use of EACCES, EMFILE, ENOENT, and ENOSPC
from qt_error_string on Windows. qt_error_string is supposed to be used
only with Win32 error codes from GetLastError(), despite there being a
lot of uses in cross-platform and even Windows-specific code that pass
errno constants.
It may or may not work: that depends on whether the constants happen to
match. ENOENT matches ERROR_FILE_NOT_FOUND and one could argue that
ENOSPC matching ERROR_OUT_OF_PAPER is acceptable, but EMFILE isn't the
same as ERROR_BAD_LENGTH nor is EACCES, ERROR_INVALID_DATA.
Change-Id: I1eba2b016de74620bfc8fffd14cccb7f77f4b510
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ASN UTCTime uses two characters to encode a year (YY). When converting it
into QDate, it's quite naive to just add 2000. According to RFC 2459,
these YY represent dates in the range [1950, 2049].
This patch also introduces a helper function doing the checked conversion
from a string to int (to be reused in the following-up patches).
Task-number: QTBUG-61934
Change-Id: I3f6f471d24e8357b83b2f5973023b2b842751389
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Consider the raw string \\\\. The previous algorithm would consider
the last 3 \ to be escaped because the previous character is a \ and
thus calculating a maxLength of 3.
But this should be treated as two escaped \ with a maxLength of 2.
Change-Id: I6c4b8d090a2e1c6e85195d5920ce8b80aea1bc2d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QVariant claims to be able to QVariantHash and QVariantMap, but the
actual conversion implementation is missing.
Task-number: QTBUG-61471
Change-Id: I0cba74642aa77dc423effed289bc7619922a89eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Subtract the viewport margins from the contentsRect in
QCommonListViewBase::updateHorizontal/VerticalScrollBar(). This
affects list views in icon mode and list mode / ScrollPerPixel.
Task-number: QTBUG-61383
Change-Id: I6f2f7951ac9344ac21cef1eba061780d130e2467
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QLocale] Fixed the conversion of QTime to string
form and parsing from string form to always treat the value as the
decimal fraction of the seconds component. That is, the string format
".z" produces/parses ".2" for 200 milliseconds and ".002" for 2
milliseconds. Use of "z" or "zzz" is discouraged outside decimal
fractions to avoid surprises.
Task-number: QTBUG-53565
Change-Id: Ia19de85ad35e4eb7bb95fffd14792caf9b4a5156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QWindowsFileSystemWatcherEngine uses one change notification
per directory to watch directories or files within that
directory. Adding files and their directories in a sequence
caused the value in QWindowsFileSystemWatcherEngineThread::HandleForDirHash
to be overwritten.
Relax the check for the flags (watcher attributes) to use >= and recreate
the change notification of a directory should its flags be insufficient.
This triggers when a file is added after its directory since files
require more attributes.
Task-number: QTBUG-61792
Change-Id: I371a72f1934fa82c53aaf84beb907825031f1c81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix a number of issues that caused polygons to not always be drawn
fully connected.
Ensures the original lastPixel is set when drawing closed polygons,
ensure we don't round away from the original starting point, and add
handling of edges that need to be rounded half a pixel sideways to line
up with endpoints.
Task-number: QTBUG-27053
Change-Id: Ib51ee5623a629996af51a0967096383f04e91e2f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reads the v4 and v5 info-header together with the rest of the info-
headers, and use that to report the correct image format before
decoding.
Change-Id: I69e2bcc54367b7f14820815ae2ae1fa2d8d5dc8c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A visibile QOpenGLWidget receives a QEvent::WindowChangeInternal which triggers
a QOpenGLWidget::reset(). A hidden QOpenGLWidget never received this event
so it was never reset, resulting in a black rendering.
Includes unit-test that fails without this patch.
Change-Id: I9d2c57d66fa629f631a9829a5ebf4de09998ad75
Task-Id: QTBUG-60896
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Print time in the error handler to get some diagnostics
about when the network connection is dropped.
Task-number: QTBUG-61673
Change-Id: I376bec81f52d75c9b601f2af9b7e0b63f5883bb0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use 15s instead of 10 (one check took 7.5s on my development machine, even).
Port to QTR_VERIFY_WITH_TIMEOUT instead of rolling our own waitForDone(),
as that reports (within limits) by how much the timeout was exceeded.
Change-Id: Id76a66d5f4fe3a4e814915add329eb4de3d264a7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
