Methods can be invoked with QMetaMethod::invokeOnGadget
Change-Id: Id734868bb530b02587daf0f62bce01798ade2ac2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
There are more opportunities in QtCore and the rest of Qt to make signals
private instead of public. This is a test-dart to see if there is any
reason not to do this.
It would be nice to make QObject::destroyed private, but as it has a
default argument it would be source incompatible to anyone connecting
to the SIGNAL(destroyed()) instead of SIGNAL(destroyed(QObject*)).
Currently the function-pointer-based connect syntax does not accept
a functor (or lambda) with a different number of arguments than the
signal. Olivier says a fix for that might come in 5.1, but for now
the qfiledialog2 test is changed to not use that anymore.
Also, the function pointer for a private signal can not be assigned to
a local variable, so the qmetamethod test is changed to not do so
anymore.
Change-Id: Iaf776b822f9ba364f2c184df0c6b23811da56e44
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Given a member function that's a signal, returns the corresponding
QMetaMethod. Inspired by the implementation of the template-based
QObject::connect().
The primary use case for this function is to have an effective and
exact (not subject to shadowing) way of checking whether a known
signal was connected to in reimplementations of
QObject::connectNotify(QMetaMethod), avoiding string comparisons.
Example:
void MyObject::connectNotify(const QMetaMethod &signal)
{
if (signal == QMetaMethod::fromSignal(&MyObject::mySignal)) {
// Someone connected to mySignal ...
}
}
Change-Id: I5e4de434275fe543c004d569dcaa9ceda3442f03
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This is done in preparation of introducing the
QObject::connectNotify(QMetaMethod) function. Together with the
forthcoming QMetaMethod::fromSignal() function, which returns the
QMetaMethod corresponding to a Qt/C++ signal (member function), the
comparison operators provide an effective way of checking which
signal was connected to.
Change-Id: I2de48628c4884a7174fb8574895f272cb3fe5634
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QMetaMethod::typeName() is documented to return an empty string if
the return type is void. But after the introduction of
QMetaType::UnknownType (where void was made a distinct type),
returning an empty string causes the idiom
QMetaType::type(method.typeName())
to break; the result will be QMetaType::UnknownType rather than
the expected QMetaType::Void for methods that return void.
New code should use the new function QMetaMethod::returnType()
instead, but it would be good if existing code still did the right
thing.
The consequence of returning "void" instead of an empty string is
that it breaks existing logic that uses the typeName() length to
determine whether a method returns void. But we judge this as the
lesser of the two evils; it's better to have a typeName() function
that is consistent and keeps the QMetaType::type(method.typeName())
idiom working, than to force the typeName() inconsistency for void
only to keep code that does "strlen(method.typeName()) == 0"
working.
The places in Qt that were relying on a zero-length typeName()
(testlib, dbus, declarative) have already been changed to use
returnType().
Also adapt QMetaObjectBuilder, which is internal API.
Change-Id: I70249174029811c5b5d2a08c24b6db33b3723d19
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Since the introduction of QMetaType::UnknownType, void is a proper
meta-type, and the normalized form of "void" should be "void", not
an empty string.
Add more tests to ensure that we do remove "void" in the one case
where it actually should be removed (e.g. "foo(void)").
Change-Id: I72dc2d24da67cf52da00c678f50213cff1b92e25
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QMetaType::Void was ambiguous, it was pointing to a valid type (void)
and in the same time it was signaling errors in QMetaType. There was
no clean way to check if returned type was valid void or some
unregistered type.
This feature will be used by new QMetaObject revision which will
store type ids instead of type names. So it will be easy to
distinguish between:
void mySlot();
MyUnregisteredType mySlot();
Change-Id: I73ff097f75585a95e12df74d50c6f3141153e771
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This commit introduces two significant changes to the meta-object
data format:
1) Meta-type information (QMetaType type/name) information is
stored directly in the meta-data for both properties and methods;
2) The original signature (string) of a method is no longer stored
in the meta-data, since it can be reconstructed from the method
name and parameter type info.
The motivation for this change is to enable direct access to method
names and type information (avoiding string-based lookup for types
if possible), since that's typically the information language
bindings (e.g. QML) need. (moc already had all the desired
information about methods, but it threw it away!)
This change keeps support for the older (6 and below) meta-object
revisions, but the support will be removed after a short grace
period.
The following public QMetaMethod functions have been added:
name() : QByteArray
returnType() : int
parameterCount() : int
parameterType(int index) : int
The following internal QMetaMethod function has been added:
getParameterTypes(int *types) : void
This commit extends the meta-method data to include explicit
type/name data for methods. The new data follows the existing
(5-word) method descriptors in the meta-data. The method descriptor
format was modified to enable this. First, the descriptor now
contains the meta-data index where the method's type/name information
can be found. Second, the descriptor contains the number of
parameters. Third, the descriptor has a reference to the name of the
method, not the full signature.
Each entry of a method's type/name array contains either the type id
(if it could be determined at meta-object definition time), or a
reference to the name of the type (so that the type id can be
resolved at runtime).
Lastly, instead of storing the method parameter names as a
comma-separated list that needs to be parsed at runtime (which was
how it was done prior to this commit), the names are now stored as
separate entries in the meta-object string table, and their indexes
are stored immediately after the method type info array. Hence,
parameter names can be queried through the public API without
parsing/allocating/copying, too.
Task-number: QTBUG-24154
Change-Id: Idb7ab81f12d4bfd658b74e18a0fce594f580cba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This function provides a proper way of determining whether a function
returned by QMetaObject::method() is valid. (Checking whether
signature() returns a 0 pointer, which e.g. testlib does, is not an
ideal API -- especially given that signature() will soon be removed
and replaced by a function that returns a QByteArray.)
Change-Id: I644f476b09904925f2042945f5d0ad744482b682
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This autotest checks that meta-methods can be properly inspected
(signature, return type, parameter types, etc.).
Change-Id: I13dc75ec5123280e94ec738dade3f54e427fdbaa
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
