When a QComboBox is used as the editor for a relation inside a view then
it could end up showing the contents of the EditRole. This would be the
field which is used to represent the entry as opposed to the DisplayRole
which is what the user would expect to see is.
Therefore, setEditorData() is overridden to ensure that it is showing
the right data to the user. When the model gets updated, it will take the
corresponding EditRole value as before to ensure it is updated correctly.
Task-number: QTBUG-59632
Change-Id: Ibbccc3e9477de1cdefb654051b97dd111df36382
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is the counterpart of the previous commit.
[ChangeLog][QtCore] Added QCborStreamReader and QCborStreamWriter,
classes for low-level reading and writing of CBOR streams.
Change-Id: Ia0aac2f09e9245339951ffff13c72e4bffdf4a56
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When a new model was set with setSourceModel() and the mapping was
built up, the destruction of the old model caused a reset in the
QSortFilterProxyModel which lead to an empty view or an assertion.
Now we properly disconnect the old model again and also clean up the old
mapping/persistent indexes when a new source model is set.
Task-number: QTBUG-44962
Task-number: QTBUG-67948
Task-number: QTBUG-68427
Change-Id: I2e0612899c210bde3ac0cfa59aefd78269deee5b
Reviewed-by: David Faure <david.faure@kdab.com>
Use the screen resolution obtained from QScreen instead
of QDesktopWidget.
Change-Id: If27bcf1c94a783c4c617d5364846b95a625bb93d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
A step modifier already existed when scrolling with the
Qt::ControlModifier held. This patch applies this functionality to
other methods of stepping a spin box.
Holding the modifier increases the step rate when:
- scrolling;
- pressing the up/down keys;
- pressing the spin box up/down buttons.
[ChangeLog][QtWidgets][QAbstractSpinBox] The Qt::ControlModifier
increases the number of steps a QAbstractSpinBox takes for the
following interactions: scrolling, up/down keyboard keys and the spin
box buttons. Previously, Qt::ControlModifier only affected scrolling.
Task-number: QTBUG-67380
Change-Id: Icc8754d5c007da0771bfaef113603a2f334dd494
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
tst_QListView::horizontalScrollingByVerticalWheelEvents failed to
compile with this qmake argument.
Change-Id: I35dd4ad4c9ee92c06c94b21dd7325aee00fc98d4
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Since we moved the menu items validation and target/action to
QNSView (thus relying on the responder chain), we need to take
care of case when the applications that doesn't have any window
open. By adding similar methods to QCocoaApplicationDelegate,
the last responder, we ensure the menu items will be validated
and will trigger properly. This is particularly necessary for
dock menu items, which live separately from any top-level widget.
Dock menu added to Menurama which won't quit when its last window
is closed. This way we can test that dock menu items will trigger
in the absence of any window.
Change-Id: I56d864eb9da1f8dd5adb2a3b6c3dd5304c723117
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The bounding rect was not including positive leading of the last line. This
patch solves it by changing using QTextLine's setLeadingIncluded, and adds
handling of negative leading to keep rendering unchanged in that case.
Change-Id: I4d18b81892184bb85cd7949a5dc3fb9cfa270a26
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Qt already has the widget attribute WA_StyleSheet to which indicates that
a widget was subject to a style sheet, but it doesn't indicate that the
widget was actually affected by the style sheet. For example, an application
style sheet will set the WA_StyleSheet attribute on all widgets, even if it
only targets QPushButtons. The WA_StyleSheetTarget new attribute pairs with
WA_StyleSheet to give this extra information.
[ChangeLog][QtWidgets] Added the Qt::WA_StyleSheetTarget attribute to
indicate that a widget was affected by a style sheet.
Change-Id: I7cca18ddec8fbb69f294ae2ef990672a5f4f1d83
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
On macOS the selected text was empty when run together with other tests. Change
QApplication::setActiveWindow() to QWidget::activateWindow() to get keyboard
focus as well. After that the expected temporary file name is selected.
Change-Id: I3b0c2bfca8008cb89b7e666a362beb15a851d8e0
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now itemHasNoContents() is flaky when run together with others on macOS.
The failing assertion seems to be just checking that an effect added to an item
with the QGraphicsEffect::ItemHasNoContents flag is painted, so relax it to
allow multiple repaints.
Change-Id: Iecf445ce1bce672e7cd180a148cd53f9c60e40fe
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Windows 10 windows contain an invisible area within the NC window frame
on which the mouse cursor is enabled to perform resizing. This change
captures the geometry of the invisible margins and considers it when
moving a window, so that, for instance, a move(0,0) does not generate
gap between the window and the beginning of screen.
[ChangeLog][Windows] The dimensions of invisible margins inside the
frames of Windows 10 windows will now be disregarded in the positioning
of Qt windows to avoid a misplaced look (offset by a few pixels from
the expected position).
Task-number: QTBUG-55762
Change-Id: I1f537756eb1a093f78b919de9d44992528199700
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Wait for the spinbox to show become active in the previous test. Also use
QWidget::activateWindow() instead of QApplication::setActiveWindow(). Use of the
latter seemed to result in some confusion where QWidget::isActiveWindow()
returned true but QWindow::isActive() on the underlying window returned false,
leading qWaitForWindowActive() to fail.
Also remove superfluous setting of focus. It was just set and verified.
Change-Id: I023cdc2d272e23b2537b32606b7a3bf35bf671ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that made create()
on a type with const qualification fail to compile.
Task-number: QTBUG-68300
Change-Id: I0825ff5b5f6f4c85939ffffd152f3e55e5b9caae
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This accounts for a case of a placeholder being duplicated in the
prepare query, but where only one placeholder was used. This amends
e4e87a2ece
Task-number: QTBUG-68299
Change-Id: Ia92ee912facd51a13e7222886debb219b24442b0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
setAutoRepeat() is failing on macOS and Windows when run together with
defaultAndAutoDefault(). It succeeds when run on its own. Adding the wait allows
it to succeed when run with the other tests as well.
Amends 0cb940b1d3, which removed the wait.
The comment is the same as before. I couldn't see a better way to replace the
wait (QApplication::topLevelWidgets() already returns only the testWidget and
testWidget->isActiveWindow() returns true).
Another theory I had was something waiting for the KeyRelease so I changed
QApplication::sendEvent() uses to QTest::keyClick(). It did not help but that
still seems preferable.
Change-Id: If87d1e6e018751f3068ea4c913ae6731aba41ff0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTableModel::setItemData() did not treat Qt::EditRole and
Qt::DisplayRole as the same. This lead to inconsistencies between
setItemData() and QTableWidgetItem::setData()
[ChangeLog][QtWidgets][QTableWidget] Fix handling of Qt::EditRole and
Qt::DisplayRole in setItemData().
Change-Id: I456f4c8e654de701dcd579236162b8aaa8ba1e53
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
tst_QProcess hangs sometimes in QEMU. Based on my experiments in a debug VM the
offending test seems to be processesInMultipleThreads(), since that was were I
was able to reproduce the hanging in.
Since the whole test executable hangs, blacklisting is not enough, so skip the
test.
Task-number: QTBUG-67760
Change-Id: I34f8852be955a8612deac22b369f68d79a139d11
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Otherwise using it later is a compile error on ARM if no header including it has
been included before.
Change-Id: I422eeb948da4a22bc3f649daff39740703039372
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The added test case contains the binary JSON equivalent of
["ž"]
with the modification that the string's length has been set to INT_MAX. In
Value::usedStorage this length is used through the pointer d like so
s = sizeof(int) + sizeof(ushort) * qFromLittleEndian(*(int *)d);
Because 2 * INT_MAX is UINT_MAX-1, the expression as a whole evaluates to 2,
which is considered a valid storage size. However, when converting this binary
JSON into ordinary JSON we will attempt to construct a QString of length
INT_MAX.
Fixed by using String::isValid instead of Value::usedStorage. This method
already takes care to avoid the overflow problem. Additionally, I've tried in
this patch to clarify the behavior of Value::isValid a bit by writing it in a
style that is hopefully more amenable to structural induction.
Finally, the test case added in my previous patch had the wrong file extension
and is renamed in this one.
Task-number: QTBUG-61969
Change-Id: I45d891f2467a71d8d105822ef7eb1a73c3efa67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QTableWidgetItem setData() function
Task-number: QTBUG-48295
Change-Id: I82289b6db78eeef09d586da267046032984952da
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previously the test worked because the client was the last party to know
when encryption was established. However, due to changes in the TLSv1.3
handshake the server is now the last one.
In either case, relying on both to be encrypted when one of them is
finished is not great, so now we only quit the event loop when both
client and server have emitted 'encrypted'.
Change-Id: Ic1fc75671206d866f7ea983805fd58a99657aac6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QHeaderView::reset() did not reset the cached size hint which could lead
to wrong geometries when the model was reset.
Task-number: QTBUG-67927
Change-Id: I5100b28a741cc816133a229c422f9abf83f2187e
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
tst_QHeaderView::sectionSizeHint() did set some values but did not check
the return values.
Change-Id: Id606d7a06935a3d6783bc9a8c10bf05d953adec6
Reviewed-by: David Faure <david.faure@kdab.com>
