Don't create the plugin config files when doing shared builds, otherwise
for example Qt6GuiPlugins.cmake will try to include the xcb plugin cmake
config, which in turn will perform a full-fledged find_package series to
locate xcb. When an application just uses find_package(Qt6Gui), then
that is not needed.
Change-Id: I1890aaa5be8e214151c65fa981f547a73c0ca7fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
QtUiTools in qttools is a public module that has only headers, so it's
an interface library in cmake. That means INTERFACE_INCLUDE_DIRECTORIES
cannot contain paths to the source or build directory, unless they are
prefixed with BUILD_INTERFACE, which this patch adds.
Change-Id: I047700f447237dfbe5a901072eb413a159ae537d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fix up the previous commit and use separate COMMAND parameters for
add_custom_command to ensure the expansion of the PATH. The injection
via -E env "/some/dir;%PATH%" does not work as the dollar expansion is
not applied when the ninja command uses cmd /C. This relies now on
undocumented behavior of cmake ;(
Change-Id: I5b5fc88e4c13f8fb6c6bba3131204c2eb35404d6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Our tools are typically installed into the Qt bin directory, after which
they are useable right away on Windows, since the Qt dlls are located
there, too. An exception to the rule are tools that are built within a
module and used right away. At that point they are in the top-level
bin dir of the build directory, along with "local" DLLS they might need,
but with the Qt dlls out of reach. To cover this case, we need to
prepend a PATH adjusting command when using these with
add_custom_command.
Change-Id: I7f58581f5060c8004b5d1fa1f6f17297256783de
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Building qtdeclarative on Windows in a non-prefix build failed due to
usage of include paths of WinMain that don't actually exist.
Mark the library as not having include paths by setting
NO_SYNC_QT.
Change-Id: Ibdb420981069967414a119dedc7a7bfc9d61c253
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Do not build examples in static builds as they are not prepared
for this configuration.
Change-Id: Ia0fd0a6cdfa3733bf13eb2ca8398668f26c0bedf
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I3906a08f5e0cce9abeeafbb67a83d31fbf67c703
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the ICC configuration we can't build the qtbase libraries with ICC
and qtdeclarative with gcc, mixing won't work well. On Windows we've
covered this compiler mixing scenario using our toolchain file, but the
ICC case makes it clear that we have to be consistent about caching the
compiler in the toolchain file across platforms.
Change-Id: Iad2005ab00655f902e5f5cea2f0563d790d8aa93
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I8cb97afaaed46ee64b5a133e797179d7ddecdeef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building QtQmlDevTools we don't generate syncqt headers, but the
non-existent include paths were still added, which means that anything
that used QtQmlDevTools would fail to configure (the standalone tests).
Make sure to only add the include paths if syncqt was executed.
Change-Id: I6d79ecf53e9a5d396e8df801584ce2c9f119f9be
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Whenever the qml compiler is used to process qml files from a
resource, and there are no resources left after all qml files have
been processed, make sure to propagate the created resource target
to add_qt_resource, so that the target is associated properly with
an export name.
Additionally the generated qml cache loader file uses private Qml
headers. Thus the object library that contains the cpp file should
have qml as a dependency (and not the target that will link to the
object library).
Change-Id: Ib385a900823df3e015492cdd06acd8a0cb9f8e9a
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The name (key in wasm.json) for the QPA plugin is "wasm", not
"webassembly".
Change-Id: I6a2568d05e4f19408fa95ac59a47acdcf90e11a2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We use
qt_find_package(harfbuzz PROVIDED_TARGETS harfbuzz::harfbuzz)
which would set harfbuzz_FOUND. Since variable names are case-sensitive,
this is also the name we must check for in the qt feature condition.
Change-Id: I43420489c3310bc9c3e5cc798a005c8d5b0ab646
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Override the default binary path for qmlimportscanner so that it points
to the host build specified via QT_HOST_PATH.
Change-Id: Ib0b47e61315c87ce6225e2d8ca84043cae03357d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Update Android build configuration to be compatible with the multi-arch
android build patch to qmake. We can now build and generate the apk
correctly. Executing on the device/simulator will only work once the
latest changes from 5.14 have been merged in.
We now replace target suffix with ${CMAKE_ANDROID_ARCH_ABI}.[so|a] so
we don't have to deal with handling targets which might have any of the
OUTPUT_NAME properties set.
The dependency and deploy settings generation has also been updated to
append the file contents to a string and then do a single file write
at the end.
Change-Id: Id3c5bd0428141ecaf962124a100390e3a4e41feb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qmlplugindump is not build during a Qt static build, so there's no
point in creating custom targets that would run the tool.
Change-Id: Id7d6d44da63312f298f46eab08a5637cb0c97c8f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At the moment we only support building with Emscripten, so that's the
system name to look for.
Change-Id: I08782ed0201da1593058bf1fb2ec61d6660802ed
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Don't try to build the ibus input context plugin when targeting
Emscripten, as there's no ibus there.
Change-Id: I949a09c4bacd3136b632e597dd8048653d0c0fea
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The first issue is that instead of arg_OUTPUT_TARGET we should use
rcc_OUTPUT_TARGET (there was also a typo in the OUTPUT word).
The second issue came with the fact that the object library targets
that were created for resources had a "Qt6::" namespace prefix in the
exported Targets files, and yet the link generator expression did not
contain the prefix. This failed when building qtsvg in a static build,
because the exported object library could not be found.
The solution is to use the TARGET_NAME generator expression which
takes care of adjusting the name of the target when exported, thus
making the linking work both when building qtbase and when building
qtsvg.
This had the fallout, that all resource object libraries need
to be associated with an export set and installed. This wasn't the case
for plugins, because plugins have an export name of the form
"FooTargets", whereas the export name for the resource object library
is "Qt6FooTargets".
Adjust the export names of plugins to be the same as for modules and
resource library objects (aka contain the "Qt6 prefix").
Change-Id: I1ca28d20c51e4447e5783cc20571a68ec77f6513
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure to document both variables are required when invoking cmake.
Otherwise, one might be omitted causing side-effects.
Change-Id: I3390df1cb5352ea6113952c99fcedef5336f2fc1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* The -no-undefined linker option only makes sense for shared
libraries. The WASM build is a static build though.
* The -gc-sections linker option is only relevant for host tools
and certainly applicable to the WASM toolchain.
Change-Id: Ib8daec66a6d80f5025887448882dd891e6176268
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is a simple mis-understanding between try_compile assuming interest
in the launching part of the thing we try to compile and our
architecture test being interested in the binary.
Change-Id: Ie972b662b6f34699f566649bb2c1e29da35b58c3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add missing qml root path variable in the deployment configuration file.
Not having this variable will cause androiddeployqt not use the
qml dependency scanner to package all relevant dependencies.
This patch also fixes QT_ANDROID_BUNDLED_FILES files not being
processed.
Change-Id: I5bca33cdbb57098f283b38516b777571806da9e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Conditions scopes that had "else" were not handled properly.
The "else" condition should be expanded to its proper negative full
form.
Also every condition "piece" should be wrapped with parentheses before
being passed to sympy simplification, to be sure that boolean
operator precedence is applied properly.
Refactored the code a bit to make it easier to read.
Change-Id: I4726845b867f93c3afbc9362cdce1cd063ccff63
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Essentially pass them through without failing the whole
conversion process.
Change-Id: I7bbd198203f79b45120a7254e2ecdf58e32f9525
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
no-png is an old unused scope that should be mapped to the png
feature instead.
Map contains(QT_CONFIG, shared) to correct variable check.
Sympy doesn't like dashes in indentifiers, so replace all of them
with a _dash_ token which will be replaced again at the end
of the condition simplifying.
When doing sympy preprocessing, fix mapping of target names that
don't contain double colons.
Change-Id: Id3d37800665c96505b7cbb1d80fdbed59c3ae9c0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Designer components target names need to be prefixed with Qt.
Change-Id: I13037820b080d88cd670f2db97232509eb868daf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The libclang test is implemented as a custom FindWrapLibClang module.
The module does mostly the same things as the configure test in qmake
land.
Change-Id: I965f284baf7daef074e22f033047c35a917c8808
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Assume that interface libraries can't have plugins for now, otherwise
we'll need to change the "MODULE_PLUGIN_TYPES" property name to
include INTERFACE_ as a prefix.
Change-Id: I21b64179ded5fd10216d843a21ee149e002793f3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is required to package an apk which depends on QtDelcarative.
Change-Id: I1f6bdeb984f08d73f010fb4210242e5c99f1969f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove repeating '../' pattern from target names, since we generate
the targets in the correct location with CMake.
Change-Id: I89d527a9ad717f742f8d0e5921f378e6ac0a229d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
From all the observed cases, the parameters given to OUTPUT_DIRECTORY
tend to be CMAKE_CURRENT_BINARY_DIR, which was the default value. This
change is mainly to avoid add_qt_test failing if OUTPUT_DIRECTORY is
specified.
Change-Id: I26b931dd33ad1e991b64c14cc11b4b7a713fc858
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use GLOB_RECURSE for testdata instead of globbing the top level folder.
Although RCC supports scanning directories, it will result in alias
collosions and test not being able to find the files on platforms
where test data is embedded into the binary.
Change-Id: I35d3d46a5d9fcafa5c8dc833eafdd0044ffe355f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Prevent the quick compiler running on embedded test data for platforms
such as Android. This breaks certain assumptions about the test setup
otherwise.
Change-Id: I1026da3e16552256623de26b843ea32ed2c4260e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Update all public Qt macros to use qt6/QT6 instead of qt5/QT6.
Change-Id: Ib178f4fa21f37dfb8da7d4d8c097aa0e96c9d9f9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On android test data is embedded into to the binary via resources. This
will not work with sourceless tests such as the qml only test cases.
Change-Id: I3ecf28223b3c7c6dae4ca3f15519adc028082598
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
When using the quick compiler to compile qml files, add an explicit
dependency on Qml. This will result in linker errors otherwise.
Change-Id: Ib7af0e8ec1b48822fd0d3c3556f10d24f10e7489
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also add support for modules that have no private module counterpart.
Both are needed for Designer's QtUiPlugin in qttools.
Change-Id: Ia7e9d8837140e1de5cd59e196b4f63481ab68298
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Specifically what each of the list variables in
qt_internal_create_module_depends_file is used for.
Change-Id: Ie4f8c0d7387308518932d37e802ecaeb0572b955
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
The content of the generated header files should reference both public
and private Qt module dependencies. This is the same as what qmake
does.
Change-Id: I2e47c93291d677b86af7bb80fb788b2acf939743
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In some places of the build system we need to iterate over repo specific
Qt known modules (aka the ones that are built in the current project).
In other places we need to iterate over the whole list of known Qt
modules (those found via find_package + the ones built in the
current project).
Introduce two separate functions that provide access to either the
former or latter, and adjust all existing usages of QT_KNOWN_MODULES as
needed.
Change-Id: Ica96d0cfe690b9aaaa3f8c53bc84975bccad69c7
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
