Make sure the reply is marked as finished and that the body is received
even if we didn't succeed.
In a real scenario that would include some text like Access Denied.
Also, no longer clear() the authenticationHeader in the server, since
that meant the server would not send the header again if the client
failed to authenticate. Luckily this wasn't actually causing any
problems before, since we only tested the expected www-authenticate
header.
As a drive-by: clang-tidy complained about not using const-ref for a
lambda.
Pick-to: 6.6 6.5 6.2
Change-Id: Ia4452fff7d9370d7d460433257d84eff0a6f469b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since we use runtime plugins now and the test doesn't use any
symbols from openssl
Amends 486b1aec16
Pick-to: 6.6 6.5
Change-Id: Ib66d1ca15835c41fe138c7830ce3edd0bdce0d5f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The declaration was moved out of the #if QT_CONFIG(openssl) block at
some point, but the definition was not. This caused compilation errors
when building without OpenSSL configured.
Pick-to: 6.6 6.5
Change-Id: I41ed85fd57f5a912498e0f2517761b81a7b8673c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add two overloads to QNetworkAccessManager to support GET requests
with body.
Modify QNetworkReplyHttpImpl as well as these requests should not
be cached.
If the request is redirected it is possible that its type changes
from POST/PUT to GET and in this case the message body is deleted.
However, if a GET request has a body it should keep it after it has
been redirected - modify QNetworkReplyHttpImpl to keep the message
body after it has been redirected.
Fixes: QTBUG-112871
Change-Id: Ib01898638ed94238a98291870a5c51d56030868a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
We were using the .remove(Key) API on the map instead of
erase(iterator), so we were removing any reply of the same priority that
had not yet been popped from the queues.
Rewrote to drop loop and only work with iterators.
This issue was there since SPDY days, so not picking all the way back to
5.15, where HTTP2 anyway is not enabled by default.
As a drive-by, drop the #ifndef QT_NO_SSL, which was also there from
SPDY times, which was TLS-only.
Pick-to: 6.6 6.5 6.2
Fixes: QTBUG-116167
Change-Id: Id7e1eb311e009b86054c1fe3d049c760d711a18a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Makes it easier to get an idea of what went wrong
Change-Id: Idace20ecf008fa906780881b62ed44ac36751123
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
qnativesocketengine_win.cpp: don't check if timeout is < 0, because
remainingTimeAsDuration() doesn't return negative values.
All the changes done in one go, not function by function, as that causes
the least churn. You can think of them as a couple of very similar
changes repeated various times.
Drive-by change: replace `forever {` with `for (;;)`
Task-number: QTBUG-113518
Change-Id: Ie9f20031bf0d4ff19e5b2da5034822ba61f9cbc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By fixing how many requests we are expecting to _finish_.
Since the nRequests variable is only decreased once a
request is finished, we only actually expect 1. No matter
how many times it gets redirected.
This was the slowest test-function in the test, clocking in at
10 seconds. Now it's sub 500ms.
Pick-to: 6.6 6.5
Change-Id: I544360f0928466c1bc0fbc6806952ccec588d131
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There was an extra `q` before dnslookup.
Found while trying to build tst_qdnslookup, the target wasn't seen by
CMake/Ninja.
Pick-to: 6.6
Change-Id: Id594aab30dc9081fc269541561e0f2db5e615657
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
See code review 496440 on Gerrit for the details.
Change-Id: Ibd32a44cf7e2e07f36687cc2f0eeaf3008f64e73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The pre-existing test for QLocalServer was testing only a minor subset
of cases, so replace it with the call to
QTestPrivate::testReadWritePropertyBasics.
The test for QLocalSocket's bindable properties was missing, so add
it.
The new tests didn't reveal any problems.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I695bb050d39eeae9ffb84c097c36601a4ca89af6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The pre-existing tests were not using the QTestPrivate helpers, so
extend them with the call to QTestPrivate::testReadWritePropertyBasics.
The updated test didn't reveal any problems with binding loops, so no
other action is required for now.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I51a17974a7f5bec3c969fcb55b6f28e3e9218eb5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Private libraries and WrapOpenSSL were linked conditional to
QT_FEATURE_private_tests in the CMake file.
qsslkey_p.h and open ssl symbols were included conditional to developer
build. A developer build fails, with test enabled and private tests
disabled.
=> Change the CMake condition to QT_FEATURE_developer_build, to resolve
mismatch between CMake and cpp file.
Pick-to: 6.6 6.5
Change-Id: I3ac93b02701e467a0b548c35d441d35a45c4568b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
OpenSSL 3.1.2 can be configured with no-deprecated option, in this
case test fails to build.
Pick-to: 6.6 6.5 6.2
Change-Id: Icaf457f55fb001b632922856dbe4bbb5bdba220e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Let's do it in initTestCase(), where we're already searching for IPv6
addresses, instead of storing the information in a local static.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177efb6a055aaa58
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This was disabled in d0d1d74033, I guess
accidentally, by a too-wide conditional. The change the same commit
applied to QtNetworkSettings didn't make the same mistake.
I am also opportunistically updating the conditional to QT_CONFIG (I
missed this in 9d4579c1cd) and adding the
Linux-specific check, as the AF_NETLINK implementation does not rely on
getifaddrs() or if_nametoindex().
Drive-by fix indentation.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177ef8fcb11b4e1e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove all "#undef QT_NO_FOREACH" white-listing from source files.
Previous commits have removed all remaining Q_FOREACH/foreach uses in
this sub-tree.
Also remove one source file from NO_PCH_SOURCES in CMakeLists.txt.
Task-number: QTBUG-115839
Change-Id: I02cf994eda720c028e613407342fbd6658fa62b1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The QHash "cache" isn't modified in the loop body (method is const), in
general cacheSize() shouldn't be susceptible to data races.
Task-number: QTBUG-115839
Change-Id: I122a03ddd5e648d16736c16fa9289eafc886979d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The toString() method's parameter is a const&, the loop body doesn't
change the container; and the container the parameter refers to isn't
changed during iteration.
Drive-by, remove braces from single-line if blocks.
Task-number: QTBUG-115839
Change-Id: I363e1ed37c0f75fa6a9f8eac3393a6c10d756c1b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Straightforward ports where the container could be made const.
Use C arrays instead of QList if the data is known at compile time.
Drive-by, where appropriate make the for-loop variable a const& (e.g.
QString) instead of copying it for no reason.
Task-number: QTBUG-115839
Change-Id: I273a386e414e5923e750072f0407226efcd4531e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In both cases, the container is a member of the unittest, initialized in
initTestCase(), then not changed after that. So use std::as_const.
Task-number: QTBUG-115839
Change-Id: I3b66127e10ac94137260d99f354de9f66a74bec7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The containers are created locally in the top level test functions, they
can't be made const due to the way they are filled, however the loop
body don't change them; even if the code in a loop would cause
re-entrance du due to signal emittance or events processing, those
containers aren't affected and aren't changed during iteration because
the top-level test functions themselves aren't re-entered, hence
use std::as_const.
Drive-by change: take QHostAddress by const& when it's used as a
for-loop variable (it has a QExplicitlySharedDataPointer d-pointer).
Task-number: QTBUG-115839
Change-Id: I443169e10d973aba2f62854aba200fc2dc2c80aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The loops were iterating over a temporary, so use a local const auto
variable to hold it, and use ranged-for.
Drive-by, make the for-loop variable const& instead of copying it,
for any object that has a d-pointer (QNetworkAddressEntry, QHostAddress,
QNetworkInterface).
Task-number: QTBUG-115839
Change-Id: If96c0b2a6142fe2fa2ed45ed7e2435cc1f80e005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If OpenSSL version is 3.1.1 or above - this version moved the protocol
under security level 0, but the default one is 1.
Pick-to: 6.6 6.5 6.2 5.15
Fixes: QTBUG-116166
Change-Id: Iaabb2cf33e2a9f280d6167233ee16080dee808b0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Starting from OpenSSL v 3.1.1 DTLS 1.0 is only available, if the
security level is 0, which is not the case most of the time. So
we consider this version number to be a 'threshold' after which
we don't test v 1.0 anymore.
Pick-to: 6.5 6.6 6.2 5.15
Task-number: QTBUG-116166
Change-Id: I9763703f36ae742e1d3c7cb17872cf8d0d82ab85
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All of these fall into the trivial category: loops over (readily made)
const local containers. As such, they cannot possibly depend on the
safety copy that Q_FOREACH performs, so are safe to port as-is to
ranged for loops.
There may be more where these came from, but these were the ones that
stood out as immediately obvious when scanning the 100s of uses in
qtbase, so I preferred to directly fix them over white-listing their
files with QT_NO_FOREACH (which still may be necessary for some files,
as this patch may not port all uses in that file).
Pick-to: 6.6 6.5
Task-nubmber: QTBUG-115839
Change-Id: I7b7893bec8254f902660dac24167113aca855029
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
"Never use a dynamically-sized container for statically-sized data."
Port the loop from Q_FOREACH (which can't deal with arrays) to ranged
for (which can).
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: Iecfc037c8bbfc0b3196ed0c65f680768a8d2353a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Allocate participating threads and objects on the stack, not the heap.
As a drive-by, port from QList to C arrays (never use a
dynamically-sized container for statically-sized data™).
Code predates the public history, all active branches are affected.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: If8def658c1c7b505074938d637e78ad2d1f9fd57
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A caller of Q(Abstract)NetworkDiskCache::data() is supposed to delete
the returned value, and this caller forgot.
Do it now; better late than never.
Amends feb1afc782.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I1b27663df9ad49e0203172265d224fdb6ec06646
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
earlyConstructedSockets is a QObject, but had no parent and was never
deleted, leaking all the data is holds.
Fix by giving it a parent.
The code predates the begin of the public history.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: Ibc5688afd6111e84f591c37e39b6bb618d76c47a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTest::toString() returns a new[]'ed char array, which needs to be
manually deleted and QVERIFY2() doesn't take ownership of its second
argument.
Fix by wrapping in unique_ptr<char[]>(...).get().
Bug exists since the dawn of the public history.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I19ec09f46ec0ce5eacf1437f62dc625bc9343831
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I000cd3b0809b6417c3b1ab520e4de746afee71fc
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Map QNetworkError::HostNotFoundError and QNetworkError::ConnectionRefusedError
to ProxyNotFoundError resp. ProxyConnectionRefusedError when it originated
from the communication with the proxy server.
Fixes: QTBUG-68821
Pick-to: 6.5 6.6
Change-Id: I21b91f2667ba0cd329d4ece1fe543472cdab2d22
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Gerrit says it refuses to color lines that exceed 500 characters, so
let's split this line to get colors back.
Pick-to: 6.6 6.5
Change-Id: Iab6d37332e27ecdeaf1420da6fa242ca65f0aab5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use the new argument to bundle the OpenSSL prebuilt libararies so that
ssl operations are actually tested at runtime.
Task-number: QTBUG-110025
Pick-to: 6.6 6.5
Change-Id: I0d73fed463a1724a9e0ee84ba603aa2ff1bc649b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In Schannel it is not guaranteed CertificateBlacklisted will be the
first error emitted. And it really does not make a difference anyway.
Pick-to: 6.6 6.5 6.2
Change-Id: If041f913db9e78ac54e6f8bb2ba1bda110e7d64a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We now add NOMINMAX to PlatformCommonInternal target which will be
linked to everything else, so min/max will not be defined upon the
inclusion of `windows.h`, or other headers.
Pick-to: 6.5 6.6
Change-Id: I10016720dac7ce015e929885b7368ee86d8b6918
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
[ChangeLog][QtNetwork][QDnsLookup] It is now possible to look up the
root DNS domain, by setting the name property to an empty string. This
query is usually done while setting the query type to NS.
Change-Id: I5f7f427ded124479baa6fffd175f688395941610
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Testing for "res_ninit" when WrapResolv.cmake has already checked for
far more complex functions was pointless. Instead, just accept the
library that was found by find_package() as good enough and rename the
feature as "libresolv".
Amends 4a46ba1209 and
68b625901f.
Change-Id: Ib5ce7a497e034ebabb2cfffd1762c0afa2fac6e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We were getting InvalidReplyError because it was simply unknown, which
is not very useful. Previously, the Unix code used res_nquery(), which
does not return timeouts as a condition. It returns -1 if a timeout did
happen, but the content in errno could be a left-over from a previous
timeout (see the "Not a typewriter"[1] problem).
With the rewrite to using res_nmkquery() and res_nsend() from the
previous commits, we can rely on errno being set properly by
res_nsend().
$ $objdir/tests/manual/qdnslookup/qdnslookup @0.0.0.1
; <<>> QDnsLookup 6.6.0 <<>> qdnslookup @0.0.0.1
;; status: TimeoutError (Request timed out)
;; QUESTION:
;qt-project.org IN A
;; Query time: 10008 ms
;; SERVER: 0.0.0.1#53
Tested on FreeBSD, Linux, macOS, and Windows.
[1] https://en.wikipedia.org/wiki/Not_a_typewriter
Change-Id: I3e3bfef633af4130a03afffd175e31958247f9b1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
I had to write a sample query test to ensure that those servers can be
reached. They can't from the my corporate network, for example:
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("8.8.8.8") discarded: "Network operation timed out"
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("2001:4860:4860::8888") discarded: "Network unreachable"
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("1.1.1.1") discarded: "Connection refused"
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("2606:4700:4700::1111") discarded: "Network unreachable"
This will also take care of ignoring the IPv6 servers on systems without
it (as above).
Change-Id: I3e3bfef633af4130a03afffd175de18af24add70
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
