America/Sao_Paulo was not alone in starting 2008-10-19 with a spring
forward. Include the other affected zones in the check to tune the
expected start-of-day time. See [0] for details.
[0] https://github.com/eggert/tz/blob/main/southamerica
Pick-to: 6.5
Change-Id: If251d8b715090319441790696983273637765d2e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some QDateTime tests get tripped up by a transition at the epoch in
Baja Mexico. For the operator_eq() and time-difference test, simply
using startOfDay() instead of QTime(0, 0) - which was skipped - solves
the problem. For addDays() and fromStringDateFormat(), skip the
affected tests.
Change-Id: I3620f0d1e4b05d9f799662eea96a40c8284de331
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zones in Baja Mexico had a transition at the epoch.
Change-Id: Ic70e23bcc980bf371e925fcb8fb83ca5ef000c9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Given that QDTE only supports local time and UTC, using Europe/Oslo as
zone was disconnected from reality, especially as various QDateTime()s
were constructed using local time. Use the system zone.
Pick-to: 6.5 6.2
Change-Id: I95b3a6a6acf9ffc2b8c7f05d3dd9440ff173abfe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test wants to start shortly after the transition, then step an
hour backwards, into it, to check we land safely on the other side.
However, it assumed the gap witdh was an hour, which is not reliable.
Use the gapWidth already used in computing springGap instead.
The -3590 seconds in the result time is correct, as it's the ten extra
seconds we started beyond the gap, minus the hour we step backwards.
Pick-to: 6.5
Change-Id: I4399af7e54a60bd55ea51d054d3cd2ecfcb0e354
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The "{forward,back} to %s, correct to nearest" tests were reporting
the time of the transition as %s but, like the jump test, were using
the middle of the gap as the time to set. So compute that mid-time's
string once and use it in all three test names. Also renamed some
local variables to accommodate the new one for this text.
Pick-to: 6.5
Change-Id: Ic6c40c470fc74ae8bcfc0dc9d1596af06318a883
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Although the zone's daylight time offset is usually the width of the
gap, it's possible the transition is (or includes) a change to
standard time; so determine the actual gap width by comparing the
difference between time a day earlier and later to the usual duration
of two days. Also skip the test if the transition isn't really a gap.
Pick-to: 6.5
Change-Id: I56e381c9f74cfa1806d43b3ed5e4637436ebdf57
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The function is passed a zone to work in, so setting the transition to
local time made no sense; set to the given zone's time, instead.
Pick-to: 6.5
Change-Id: Icaa0955fe5fcd5bc257322afcb7e25e932dedd1b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
We check three sample dates, in different years, so don't compare
their year() to 1970, but to their respective actual years. In the
process, package the arrays iterated for these checks into a constexpr
struct array and reverse them so that, instead of reverse-iterating
and indexing, we can use a ranged-for loop.
Change-Id: I214685346c637875a4ea31125c324851eb4308db
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name final is suboptimal, given that it's also a keyword.
Rename initial at the same time.
The local-time parts of the test are apt to fail if local time
coincides with the zone being tested, as previously noted. Document
known cases of such coincidences, to help someone studying a failure
to know why it happened.
Change-Id: I1f1f302f161373a154066df210e03725b9a5f9ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the test failed, it did so in triplicate.
Pick-to: 6.5
Change-Id: Ia871aed0a5960120a2659a6778c10dccd4b2953a
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In case FEATURE_timezone=OFF auto-tests should still be built successfully
Change-Id: I0226a7d7781a412bf9e9935c2cf1a48b1ce427b5
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Noticed the warnings when building the manual tests.
Pick-to: 6.5
Change-Id: I7f927f42f11d234ec3c980f36d8e12c0c49be712
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's unlikely we will ever use pro2cmake at this project stage,
so it doesn't make any sense to keep the 'special case' markers
in the CMake scripts. Remove them and replace with TODO where
needed.
Change-Id: I84290c20679dabbfdec3c5937ce0428fecb3e5a7
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We sometimes use Objective-C++ code in files with a .cpp extension,
to avoid the churn of adding a foo_mac.mm file. Instead of manually
telling the compiler to build these files in Objective-C++ mode, we
use CMake's intended mechanism, which means genex constructs such as
$<$<COMPILE_LANGUAGE:OBJCXX> will work for these files as well.
Pick-to: 6.5 6.2
Change-Id: If295c3f34f6bee9f4d9f877f519c9c7770665fee
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the DPI of a window changes due to being moved to another screen,
or the current screen reconfiguring, the mask we've set earlier is no
longer correct, as the mask was set based on the original screen's
scale factor and in relation to the former platform geometry of the
window, which now has changed.
Like the geometry of a QWindow, the mask is expressed by the user in
the QtGui coordinate system, so it's the platform's job to transform
this into the platform coordinate system and update it when needed.
Add a manual test that users a QWidget and a Q(Raster)Window side by
side.
There's still an issue with the screen change being triggered to
early, via QWindow::setGeometry, instead of when the window has
actually moved to the new screen, resulting in the paint event
flushing to a window and backingstore that is in the wrong state,
but this requires further research to fix.
Task-number: QTBUG-97642
Pick-to: 6.5 6.2
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I7ab2d267fbaf6ac32b507d05a418eb025b354a0b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And implement the rvalue overload of addResult() using it.
[ChangeLog][QtCore][QPromise] Added emplaceResult() and
emplaceResultAt() member functions.
Fixes: QTBUG-112270
Change-Id: Id369542215a60c0818f1afa8d564498be84732e8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test implicitly relies on window activation as QWidget only emits
accessibility events for focus changes in the active window. So skip it
on platforms that don't support WindowActivation and remove it from
the blacklist.
Fixes: QTBUG-109763
Pick-to: 6.5
Change-Id: I67d9a95f4f36b5271fe53ae90140a28770566c83
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QMenu::exec opens a blocking loop, which is problematic for webassembly.
Replace with QMenu::popup, and reset the down-state of the button when
the menu is about to hide. QMenu emits aboutToHide immediately before
existing the event loop in the hideEvent override, so the timing is the
same.
Change-Id: Iccb418d10fcb25f6ad1f73f9cdce6ea6581bd73b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The "two widgets at a time" API to set the tab order is awkward and
easily misused (as the documentation explicitly explains). Add an inline
overload that takes an initializer_list, and call the existing function
for each consecutive pair of widgets in the list.
Add documentation with snippet, and a test.
Change-Id: I8e6f14a242866e3ee7cfb8ecade4697d6bdfb4d4
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDateTime::addMsecs does check for overflow. I don't know when this
has changed, but it doesn't matter.
Change-Id: I44c6ba5e88cce544c0d1ef33fa38a528a96b0b7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only unzip the test suite in initTestCase(), but run the tests from
runTestSuite(). This is mainly useful when running specific a unittest
locally, no need to wait for the whole zipped test suite to run.
Change-Id: I518a2de716d3d07fb5a78298f1bd3ab2759e744b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use TableScope helper class to make sure the table used for the test is
really cleaned up before usage.
Change-Id: I45fffcd13acae6032636ae07097b14af174ede21
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Sync the IBASE driver behavior for primaryIndex() and record() with the
rest by assuming that the given table name has the correct casing.
Change the tests for these two function to pass an unescaped table name.
Change-Id: I6d96359f97e1acc6970b9a22fdf0e968a616b7bc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][SQL][SqlQuery] Added two new functions
boundValueName()/boundValueNames() to return the names of the bound
values.
Fixes: QTBUG-97847
Change-Id: I8df5f15e8df13141a34d38b0a2e13b37f4e7829c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We can expand the testing a bit bit verifying that also
created windows work as expected, and that QWindow DPR
is updated when Screen DPI is changed.
Change-Id: I082aac18b6b086c69c16681977b7eaa6c3e54ee0
Reviewed-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
The alias created by QSqlRelationTableModel to avoid duplicated field
names was not escaped which lead to an inconsistency in the returned
alias name from the database (e.g. postgres lowers all unescaped column
names).
Also adjust the test for QSqlRelationTableModel to use escaped table
names for it's tests and fix it for QIBASE.
Change-Id: I01426320c0c1a70cb9bf8e6dfa2f8b07dbb1c06b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a context object is provided, then callers expect that the functor
or slot is executed in the thread of the context object. And if the
context object has been destroyed by the time the permission response
is received, the functor shouldn't be called at all.
To implement this, we either have to plumb the call back through a
signal/slot connection and benefit from QObject's infrastructure. This
is not practical here, as we don't have an "engine QObject" that would
emit a signal.
Instead, we can create a QMetaCallEvent explicitly, following what we do
in e.g. QHostInfo, and using a temporary QObject that handles the event
to then call the functor.
Add test coverage.
Pick-to: 6.5
Change-Id: Id878e45b304857304165ab4a7c6aae76fbee46ce
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][Deprecation Notice][QtCore] The QtFuture::makeReadyFuture()
method and all its specializations are deprecated since Qt 6.10.
The reason for the deprecation is that the method has a
makeReadyFuture(const QList<T> &) overload, which behaves differently
from all other overloads (including other non-const ref QList
overloads).
Use QtFuture::makeReadyVoidFuture() when you need a ready void QFuture,
or QtFuture::makeReadyValueFuture() when you need to propagate the
input type to the returned QFuture, or QtFuture::makeReadyRangeFuture()
when you need to create a multi-value future based on an input
container.
Fixes: QTBUG-109677
Change-Id: I55125269989df0a02840d5ddd5763ef5f1070df5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtCore][QFuture] Added QtFuture::makeReadyVoidFuture()
and QtFuture::makeReadyValueFuture().
Basically, these methods behave like QtFuture::makeReadyFuture(), but
QtFuture::makeReadyValueFuture() does not have a "const QList<T> &"
specialization returning QFuture<T> instead of QFuture<QList<T>>,
which allows it to always behave consistently.
This patch also introduces usage of the new methods around qtbase.
Task-number: QTBUG-109677
Change-Id: I89df8b26d82c192baad69efb5df517a8b182995f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtCore][QFuture] Introduce
QtFuture::makeReadyRangeFuture(). This method takes a container
which has input iterators and returns a multi-value
QFuture<ValueType>, where ValueType is the underlying type of
the input container.
This commit also replaces the usage of buggy
QtFuture::makeReadyFuture(const QList<T> &) overload with the new
method.
Task-number: QTBUG-109677
Change-Id: I019e62eac74c643d88a65b3cc0085bc7c33bc712
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This can happen if the same project has two or more Q_IMPORT_PLUGIN
macros in their source. And that can happen when converting from qmake-
based builds to CMake, as qmake didn't generate a source file with the
macro but CMake does.
[ChangeLog][QtCore][QPluginLoader] staticInstances() will not call
duplicated registrations of the same instantiation function, which can
only happen as a result of duplicated Q_IMPORT_PLUGIN for the same
plugin name.
Fixes: QTBUG-102745
Pick-to: 6.2 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd174fb9dd62d8583d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The benchmarks were only copied from the tests without a proper cleanup
- therefore clean them up now.
Change-Id: I0285de3fd2b67c21e732d7f3f9d1f4937965be81
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QMultiHash has access to two sizes: one of them is shared with QHash,
stored in QHashPrivate::Data::size, which counts keys; the other, which
is what our public size() function returns, is stored in
QMultiHash::m_size and counts plain (key,value) entries. We forgot to
update it in the non-const operator[] that created a node.
I've reviewed the rest of the code and can't find any more places where
the item count may be changed and m_size isn't updated.
[ChangeLog][QtCore][QMultiHash] Fixed a bug that caused an element that
was created by operator[] to not be counted, resulting in a hash map
with an incorrect element count and which could cause an assertion
failure depending on how the hash was later mutated.
Fixes: QTBUG-112534
Pick-to: 6.2 6.4 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd17527ec274e1d99e
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
The overhead of making new custom classes appears to be less than
constructing a generic std::function.
[ChangeLog][QtCore][QRunnable] QRunnable::create can now take
non-copyable functions as argument.
Task-number: QTBUG-112302
Change-Id: Ied870f13ca6c7eaa14ed6eff9c4e676c7b73881c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add a testcase for toSQLTCHAR() to make sure to pass the correct number
of encoded characters to the odbc functions.
Pick-to: 6.5
Task-number: QTBUG-112375
Change-Id: Ib67fab678fc3d0b098aedfc6fa9ec2139f2e75c7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A QSqlError is not equal when the native error code differs. The
database and driver text should not be considered during the
comparison because they might differ due to e.g. different locales.
[ChangeLog][QtSql][QSqlError] The comparison operators have been fixed to
take both error type and error code into account.
Change-Id: Ie7511f183f88dd454eb165c6ff237e51b79d1c08
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
One each of L1 and non-L1.
Will help porting that API to QAnyStringView.
Pick-to: 6.5
Change-Id: I51afc07c5b2384409c2627164e95265265fbb544
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the trailing frame just had PRIORITY we would early-return, though
this meant we didn't check if the frame had the END_STREAM flag set,
leading some requests to certain servers to hang.
Fixes: QTBUG-111417
Pick-to: 6.5 6.4 6.2
Change-Id: Iac174dc5aeca30d5d19fae35f303983de9841847
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Instead of adding more QString::fromMyFavoriteStringImpl(), just check
that
QStringView{myFavoriteStringImpl}.toString()
works.
It does.
Pick-to: 6.5
Task-number: QTBUG-111886
Change-Id: I337282611360b4a56a10c8acfd2d7d53ea196d5b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add the move ctor and move operator for QSqlIndex, also add an explicit
testcase for QSqlIndex
Task-number: QTBUG-109938
Change-Id: I46cc6a24c2e7d5b23d2ac3427cafd01b9ba257ed
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
