Since the introduction of QMetaType::UnknownType, void is a proper
meta-type, and the normalized form of "void" should be "void", not
an empty string.
Add more tests to ensure that we do remove "void" in the one case
where it actually should be removed (e.g. "foo(void)").
Change-Id: I72dc2d24da67cf52da00c678f50213cff1b92e25
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This actually involved tiding up QObject sources a little bit
to clearly separate QString / QRegExp overloads of findChildren.
The corresponding qFindChildren overload for MSVC 6 compatibiltiy
was *not* added.
Change-Id: I84826b3df9275a9bda03608a5b66756890eda6f8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QVariant handlers can not be unregistered. We are not able to guarantee
that such operation is safe and we do not want to.
Change-Id: Id9a12e6a8c750110e4a08eab1de3e07e5c408675
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch changes invalid QVariant qDebug stream value from
"QVariant(, QVariant::Invalid)" to "QVariant(Invalid)"
New tests were added.
Change-Id: Ia57d4fc2d775cc9fce28e03eba402c2173845b35
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Make QJsonValue, QJsonObject, QJsonArray and QJsonDocument
first-class meta-types.
This is an enabler for a lightweight integration with QML.
Change-Id: I4725efdd2746cf97fd26d3632a99e8eee849f834
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These were not covered at all by tst_qmetatype.
Change-Id: Ic957470ac78b2c15fe449efe17e1f178a41c3690
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Removed the Q_DECLARE_METATYPE in favour of first-class support
inside QMetaType and QVariant.
Change-Id: I904236822bfab967dc0fbd4d4cc2bcb68c741adc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Duplicated code was removed. As an side effect:
- one runtime flag check was replaced by a compile time check.
- is enum flag can be used together with built-in types.
Change-Id: I54173e7b07ce7e487d3cc21ba24dcccd28b5d049
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test was assuming that "data()" is a special function in autotests,
but that hasn't been the case since early prototypes of testlib.
Change-Id: Ic24cf5dc539b55d12eba0a6ab17173e2ed698f21
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Use const_cast to avoid "deprecated conversion from string constant to
'char*'" warning when building argv arrays from string literals.
- Use Q_UNUSED to avoid warnings on unused local variables.
Change-Id: Idd2c8279adc102b6ebc6af7486ba26fe9ed4e7c1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add Q_IS_ENUM() macro to determine if a given type is an
enumeration. Use information from that in QMetaType::registerType()
to store whether custom registered metatypes are enums or not.
This information can then be accessed by calling
QMetaType::typeFlags(int type). This is used by the declarative
code to determine whether a custom type in a variant can be safely
cast to an integer, which is required to allow passing non-local
enums as signal/slot params.
Change-Id: I9733837f56af201fa3017b4a22b761437a3c0de4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The function is public, so it should validate input instead of crashing
Change-Id: Id67463b0b61ab74a76c1ede7f052bdbed37822b6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The function is public, so it should validate input instead of crashing
Change-Id: Ifd9f1110f8631f942929d85db6a57eee7afffb6a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The function was crashing when an unsupported type id was given
as an input argument.
Change-Id: I2b0e3e6d43f6f248dc71532f8e6485efe68e8120
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes it possible to do things like
QVariant::fromValue(new SomeObject);
without first using Q_DECLARE_METATYPE(Something*)
This functionality was originally part of
http://codereview.qt-project.org/#change,11710 but was rejected
because the functionality was based on specialization of
QVariant::fromValue which could be dangerous.
This new implementation doesn't have such danger.
Change-Id: I83fe941b6984be54469bc6b9191f6eacaceaa036
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This commit is complimentary to the commit which introduced a similar
partial specialization for single template argument types:
6b4f8a68c8
If T and U are available as metatypes, then QHash<T, U> is too.
Change-Id: I09097b954666418b424c8c23577032beb814343a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMetaType::Void was ambiguous, it was pointing to a valid type (void)
and in the same time it was signaling errors in QMetaType. There was
no clean way to check if returned type was valid void or some
unregistered type.
This feature will be used by new QMetaObject revision which will
store type ids instead of type names. So it will be easy to
distinguish between:
void mySlot();
MyUnregisteredType mySlot();
Change-Id: I73ff097f75585a95e12df74d50c6f3141153e771
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Specialise QTypeInfo<QPair<T1,T2>> based on the properties of
T1 and T2:
- If either T1 or T2 is Q_COMPLEX_TYPE, so is QPair<T1,T2>.
- Otherwise, if either T1 or T2 is Q_MOVABLE_TYPE, so is QPair<T1,T2>.
- Otherwise, QPair<T1,T2> is Q_PRIMITIVE_TYPE.
Change-Id: I8aecbd37e3b7924f77f38967498deabf1a19ca24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Do this regardless of whether the event subclass
is public API or only used in examples. Examples
are examples, used by others as templates or even
copied verbatim, so they should also follow sound
engineering rules.
Anyway, there's only one in examples/...
Change-Id: I586ff16407a956c9e89288fdd4377eed73f45c0f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This function matches QMetaMethod::parameterTypes().
The implementation of QMetaMethod::parameterTypes() was moved to a
helper function in QMetaObjectPrivate, so that it can be shared with
QMetaMethodBuilder.
Change-Id: I4361713996dc4ea31a79c2fc74c813ee5e9c3069
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This commit introduces two significant changes to the meta-object
data format:
1) Meta-type information (QMetaType type/name) information is
stored directly in the meta-data for both properties and methods;
2) The original signature (string) of a method is no longer stored
in the meta-data, since it can be reconstructed from the method
name and parameter type info.
The motivation for this change is to enable direct access to method
names and type information (avoiding string-based lookup for types
if possible), since that's typically the information language
bindings (e.g. QML) need. (moc already had all the desired
information about methods, but it threw it away!)
This change keeps support for the older (6 and below) meta-object
revisions, but the support will be removed after a short grace
period.
The following public QMetaMethod functions have been added:
name() : QByteArray
returnType() : int
parameterCount() : int
parameterType(int index) : int
The following internal QMetaMethod function has been added:
getParameterTypes(int *types) : void
This commit extends the meta-method data to include explicit
type/name data for methods. The new data follows the existing
(5-word) method descriptors in the meta-data. The method descriptor
format was modified to enable this. First, the descriptor now
contains the meta-data index where the method's type/name information
can be found. Second, the descriptor contains the number of
parameters. Third, the descriptor has a reference to the name of the
method, not the full signature.
Each entry of a method's type/name array contains either the type id
(if it could be determined at meta-object definition time), or a
reference to the name of the type (so that the type id can be
resolved at runtime).
Lastly, instead of storing the method parameter names as a
comma-separated list that needs to be parsed at runtime (which was
how it was done prior to this commit), the names are now stored as
separate entries in the meta-object string table, and their indexes
are stored immediately after the method type info array. Hence,
parameter names can be queried through the public API without
parsing/allocating/copying, too.
Task-number: QTBUG-24154
Change-Id: Idb7ab81f12d4bfd658b74e18a0fce594f580cba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Up to and including meta-object revision 6, string data have been
stored as 0-terminated C-style strings, that were made directly
accessible as const char pointers through the public API
(QMetaMethod and friends).
This commit changes moc to generate an array of QByteArrayData
instead, and adapts the QObject kernel accordingly.
Generating an array of QByteArrayData (byte array literals)
means that the strings can now be returned from public (or private)
API as QByteArrays, rather than const char *, with zero allocation or
copying. Also, the string length is now computed at compile time
(it's part of the QByteArrayData).
This commit only changes the internal representation, and does
not affect existing public API. The actual (C) string data that the
byte array literals reference still consists of zero-terminated
strings. The benefit of having the QByteArrayData array will only
become apparent in the upcoming meta-object data format change, which
changes the format of property and method descriptors.
Support for the old meta-object string data format was kept; the
codepaths for old revisions (6 and below) will be removed in a
separate commit, once all the other meta-object changes are done and
affected code has been adapted accordingly.
Task-number: QTBUG-24154
Change-Id: I4ec3b363bbc31b8192e5d8915ef091c442c2efad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
moc is currently generating code to convert from a pointer to member
function of a slot or signal to its index.
The idea was that it could be usefull for slots to have the new syntax
do the same as the old one (connecting signal index to slot index). But
in practice, the new syntax do not use the IndexOfMethod for slots.
Also, it does not work for all the slots (no Q_PRIVATE_SLOT,
no static slots)
So since it is not used, and that it would take room in the binaries to
generate all the code to get the index of slots, we remove it.
If ever we need it, we can still add it later.
Change-Id: Ia417e3e524d7915ca86433ea86c66ac2b299c81a
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When configuring with -fast on Windows, a directory which contains two
.pro files, one SUBDIRS and one not, will have the SUBDIRS Makefile
silently clobbered by the non-SUBDIRS Makefile. In practice, this may
cause various subdirectories to be silently excluded from the build.
Rearrange .pro files for this test to avoid triggering this bug.
See also e9015b3bc8.
Task-number: QTBUG-21168
Change-Id: I18fac1ac636fdc6b2aaee1b4cdfee9c4bc2a77ff
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
They create noise in the test results.
Change-Id: I40e7239ba7cd41bec577fe8220c86476553a6502
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This function provides a proper way of determining whether a function
returned by QMetaObject::method() is valid. (Checking whether
signature() returns a 0 pointer, which e.g. testlib does, is not an
ideal API -- especially given that signature() will soon be removed
and replaced by a function that returns a QByteArray.)
Change-Id: I644f476b09904925f2042945f5d0ad744482b682
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Made test depend on subprogram to make sure it was there when
test ran.
- install signalbug subprogram
Change-Id: Ie0a19e52d131adcd17c97b263389aecffb81520e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This allows to drop or paste them into lineedits and text widgets
(including such widgets in non-Qt applications)
Implementation note: this is done on-demand rather than in setUrls
so that it's still possible to setText explicitely; the new code
is only a fallback for when no text/plain data is available.
Change-Id: Ie90c43a30bfa64a6047b627e7351d20bf5ec8e03
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Currently QMetaType API contains almost only static methods. This works
nice until someone needs more information or needs to do more operations
on a type. In this case every function call has to do type dispatch.
This API allows to avoid redundant type dispatching, by caching a
type information in a QMetaType instance. It gives significant
performance boost especially for custom types (up to 9x).
Change-Id: I223d066268402e072e41ca1d0a3e7bc160655d7f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
We should not assume that the first type id is 0.
Change-Id: I17ba6ba57e97ebd495904bfd11235fe458f214e5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This autotest checks that meta-methods can be properly inspected
(signature, return type, parameter types, etc.).
Change-Id: I13dc75ec5123280e94ec738dade3f54e427fdbaa
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Do not mark with insignificant_test anymore.
Task-number: QTBUG-22747
Change-Id: I4ef6d5d7e1189b03fd1ab812a0839e3709686e1b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
For template-based connect(), the meta-object is resolved at
compile-time (the virtual metaObject() function isn't called).
But we can make it work by copying the members of the dynamically
constructed meta-object to the statically defined one.
Change-Id: Ia4d3263a89008e36e187c584db6d25d9042f32b3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
moc supports it, so qmetaobjectbuilder should too.
Change-Id: I01475794e928b5a1b659f0dab044933948186971
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Socket notifier behavior is very OS-dependent. QtNetwork uses non-
immediately (it will return -1 w/ errno=EINPROGRESS). We have to wait
with select(2) to indicate that the connection is ready, then call
connect(2) again. When this happens, we need another call to select(2)
to get notification on the listening socket so that we can call
accept(2) to complete the connection.
The mixingWithTimers() failure happens due to the test expecting a
single processEvents() call to be able to completely connect a TCP
socket. But as described above, this may not happen. The test should
QTRY_COMPARE() to give the test a chance to let all this happen.
The posixSockets() test can fail due to the same connect() behavior. The
test already has a comment about the write notifier behavior being very
OS dependent. This caused the first enterLoop() to return too early,
before the read notifier fired (which is what the test is checking for,
that the read notifier fired). Move creation of the write notifier to
where we expect it to fire, just before writing to the posix socket.
In the same test, the read notifier inside QTcpSocket may not fire after
the write notifier on the posix socket. Use the waitForReadyRead()
function to give the socket a chance to read the data written to the
posix socket.
Change-Id: I541e6ee9a39a92ce3acf6b9ffee51079febe43e4
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Add QEventLoop::ProcessEventsFlags test data for
tst_QEventDispatcher::sendPostedEvents() to test that posted events are
sent when waiting for events and when not waiting.
Change-Id: I99f9eb121d0b1ded725e19c5233922fc0a6b81e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This will test the event dispatcher in corelib for proper timer and
posted event handling. The test makes sure all of the necessary virtual
functions are implemented and working as expected.
This test doesn't test socket notifiers or Win32 event notifiers, as
these are already covered in existing tests.
Change-Id: I5540ffc4e6d7f97bcd6c3725d7e74c0ab9c97015
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
The test was failing at:
QCOMPARE(property.userType(), qMetaTypeId<CustomType*>());
The CustomType* metatype was not registered before this part of the
test.
qMetaTypeId<T> will register the metatype for T before returning it if
it is not yet registered, while QMetaProperty::userType() returns 0 if
the metatype is not yet registered. However, the order of evaluation of
these two expressions in the above statement is technically undefined.
Apparently, gcc evaluates the arguments in order from right to left,
allowing the test to pass, while clang evaluates the arguments in order
from left to right, causing the test to fail.
Change-Id: I5059556e860cec29b57c31e4e26f46cf9e6055da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
To hide the IsPointerToTypeDerivedFromQObject monstruosity :-)
Documentation for Q_DECLARE_METATYPE and qRegisterMetaType was updated
to mention requirements on registered types and how they can be
circumvented for pointer types with the new macro.
Change-Id: If83b037a8e2f28761eb903525e87008107298801
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is possible to do this for example:
QVariant v = QVariant::fromValue<MyCustomQObject*>();
QObject *object = v.value<QObject*>();
This means that if a QVariant contains a pointer to a QObject
derived type, third parties can extract a QObject* and use its
properties without knowing the concrete type.
This is a source compatible change.
Change-Id: Iee9a9437e99cc2f40d1a4bfea47275482ef7161f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
