- Fix warning: "Character represented by universal-character-name
'\uFFFF' cannot be represented in the current code page (1252).
- Fix character conversion
- Change source file to plain ASCII, add defines for special
characters.
Change-Id: I8557e6ba7488f746247f0d78181f14bfb7d5aaae
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
When configuring with -fast on Windows, a directory which contains two
.pro files, one SUBDIRS and one not, will have the SUBDIRS Makefile
silently clobbered by the non-SUBDIRS Makefile. In practice, this may
cause various subdirectories to be silently excluded from the build.
Rearrange .pro files for this test to avoid triggering this bug.
Task-number: QTBUG-21168
Change-Id: Ic51941db497d7b8fb004f3c50f5ea24d90ff3114
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This abstraction imposed serious performance penalties and is being
dropped from the public API.
In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.
Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.
For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.
[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]
Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.
Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.
Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test is broken in a couple of ways. A few one line fixes
combined into a single patch.
1. Linux is the only OS that does
abstract unix domain sockets by prepending a null as the first
character. Don't test this on non-Linux platforms and expect
it to pass.
2. Change QVERIFY2 to QCOMPARE so we can see why this
fails in CI but no on the local system. Use QCOMPARE
where possible.
Change-Id: Ic3d2cf9696730dc4d6589539fdfe8a48ccf28de5
Reviewed-by: Alex <alex.blasche@nokia.com>
Due to recent changes in the test it should now compile
and run properly. This re-enables the test.
Change-Id: I6c647d99fa1f1b1c53e006fef2865d6be08ec16c
Reviewed-by: Alex <alex.blasche@nokia.com>
This code sets LANG=en_US so that the method comment(), which returns a translated
name, can be compared with an expected result in English.
(QMimeType::comment uses QLocale::system().name() and QLocale::system().uiLanguages())
But LANG= has no effect if LC_ALL is set, so LC_ALL needs to be cleared (or set
to en_US) for the test to work.
Change-Id: Icb031057769be9bc8c0fcab65daa45e7bf1d5b18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
The move constructor sets other.d_ptr to zero. This is safe, because
after being moved from, the object is left in a state in which it
can be safely destroyed (delete nullptr is a no-op).
It cannot meaningfully be used anymore (most members will crash with
a nullptr dereference), but in most cases, the moved-from object
cannot be accessed anyway (not a named object), and if a named object
is moved from, it must have been through explicit std::move(), as in
the test case.
The STL makes better guarantees (moved-from containers are .empty()),
but I don't think it's worth introducing a null state into
QEasingCurve just for supporting a use-case that should be
considered a bug anyway.
Change-Id: I4115b7386cdea6960507da6843a0d0196d8e4139
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented as in QPen etc.
Change-Id: I65b43c6ec7308ca4b44f614594c15c41ab2f89f9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implementated as in QPen etc.
Change-Id: Ia08551bf7902b60e115d1b1d2353030597e34841
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The meta-object format is going to change for Qt5. Use QMOB to
insulate the badxml test from such changes.
(It just so happens that the QFAIL("a failure") statement is still on
line 109 after the refactoring, so the expected_badxml.* files'
location tags did not have to be changed.)
Change-Id: I04421d13c4df71c8004fa71cafc4823a59079a41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Be explicit about skipping the test when no default printer is present.
Change-Id: If69b275eb0f490411471ec42798d8aefcc57fd83
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove previously defined insignificant test flag as the number of
tests failing has been reduced.
Task-number: QTBUG-24406
Task-number: QTBUG-23058
Change-Id: I01b41f30469cf7a440e21195e105cb30a8db76e2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QFINDTESTDATA to locate the helper applications.
Change-Id: I604d10e37c9367f2e95225864edf5bf705f1d961
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The tab key behavior in Qt5 no longer respects the "Text boxes and lists
only" tab navigation option in OSX, which is the default. This is a
regression since Qt4.
Task-number: QTBUG-24372
Change-Id: I54c1663f8fb259dd847083432102a0bfad7dd69c
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
- Made test depend on subprogram
- added install of subprogram
Change-Id: Ib263e9e75ed3c900b52fb1c9b6d319e71d19bdbb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was written incorrectly in a way which happened to allow it to
pass most of the time (but not all the time).
Reset the state of test objects between each test function, and mark the
broken functions with QEXPECT_FAIL and a link to a task.
Replace the unusual WaitForPinger construct with the usual
QTRY_VERIFY/QTRY_COMPARE method of verifying asynchronous operations.
Task-number: QTBUG-24262
Change-Id: I82d09002307c0b500bf60cd5b583674321b37609
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They create noise in the test results.
Change-Id: I40e7239ba7cd41bec577fe8220c86476553a6502
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Change-Id: I70c324e6fcfd2bba3ab44837c5ce2c007de8896f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Many (most?) strings written aren't in fact UTF-8, and we can check at
compile-time which are and which aren't, so don't hard-code fromUtf8()
but use the much more efficient QStringLiteral() where applicable.
This is low-hanging fruit. This patch only optimises US-ASCII string
literals, not those that are latin-1 or even UTF-8, because that would
require more extensive changes to the original fixString() function.
Likewise, there are also other calls to QString::fromUtf8() being
generated (e.g. in the pixmap code) that could benefit from being
turned into QStringLiterals, but their code paths are more involved
than those this patch fixes.
This patch at least suffices in turning all the setObjectName()
arguments into QStringLiterals, which was the main goal.
The autotest baseline has been updated with the new expected results.
Change-Id: Ic1ef67f500f9ff92d36164d515f4e004ef2a10bc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This function provides a proper way of determining whether a function
returned by QMetaObject::method() is valid. (Checking whether
signature() returns a 0 pointer, which e.g. testlib does, is not an
ideal API -- especially given that signature() will soon be removed
and replaced by a function that returns a QByteArray.)
Change-Id: I644f476b09904925f2042945f5d0ad744482b682
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The helper functions contained QSKIP macros which do not also skip their
parent function. These QSKIP function were removed and replaced with a
return success value.
Change-Id: I533f57842fc95beaeb1fcde5235678e9807db056
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest seems to be caught in an event loop preventing further
correct signalling. Mark test function skipped with QSKIP.
Task-number: QTBUG-24374
Change-Id: Ic943a33b71fa87d0873278cb7b7b134c22602be3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For shadow builds where "make install" had not been run, the
tst_QLocale::emptyCtor test function would fail to find its helper
application because QFINDTESTDATA was not searching for it in the build
directory due to the test not instantiating QCoreApplication.
This commit fixes the test by instantiating a QCoreApplication using the
QTEST_MAIN macro, which also allows some special case code for Windows
CE to be removed.
Change-Id: Ic81d4699da2538c24b36b3d6bd52c4a02ad417f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Prior to this commit, a benchmark test could report 0..n passes and 0..m
fails or skips, where n is the number of accumulation iterations used to
collect benchmark data and m is the number of times the test function
was invoked. Depending on the type of benchmark measurer being used,
this could result in a very large volume of test output and inconsistent
pass, fail and skip counts between test runs.
This commit changes the behaviour so that each benchmark test reports
one pass, fail or skip, regardless of the number of iterations used to
collect benchmark data.
This commit also prevents benchmark data being reported in the test
output if the benchmark test failed or skipped, as any benchmark data is
of dubious value in such cases.
The latter change in behaviour requires a minor modification to the
badxml selftest, which now tests quoting of literal strings in xml test
output for both passing and failing benchmarks.
Finally, this commit also adds a new selftest specifically for verifying
correct behaviour for benchmarks that fail or skip.
Task-number: QTBUG-24313
Change-Id: I3426dc659a7511b62fd183a031c7235bc753f497
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Made test depend on subprogram to make sure it was there when
test ran.
- install signalbug subprogram
Change-Id: Ie0a19e52d131adcd17c97b263389aecffb81520e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Prior to this commit, when an unexpected pass occurred the test output
showed the message "XPASS : tst_foo::function() 'expr' returned FALSE",
where the problem was actually that the expression evaluated to true
when it was expected to be false.
This commit changes the output to make it clear that the expression
evaluated to true unexpectedly.
Task-number: QTBUG-22118
Change-Id: Id22c178073d3b75789675ca37a8ef019029b1f91
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).
Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
History of the development before the import:
ssh://codereview.qt-project.org/playground/mimetypes.git
Mimetype definitions come from shared-mime-info where available (UNIX systems),
loaded using a mmap'ed binary cache generated by update-mime-database.
As a fallback if no cache is found, we parse the raw XML files otherwise.
This makes the MIME type support fast and with very low memory usage on UNIX,
and it makes it easy to use on Windows (no dependency on shared-mime-info,
Qt even includes a freedesktop.xml file to use if none are found on the system).
Change-Id: I27b05008216ff936dc463bd80d3893422bfb940e
Reviewed-by: Richard J. Moore <rich@kde.org>
Emit changed signal only if the clipboard is not owned,
in which case QClipboard does it.
Task-number: QTBUG-24184
Change-Id: I27420583a718a5f8cd93b9d361b1e422a75df300
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Save & Restore style and geometry when switching to
full screen and back since it is not a real state on
Windows.
- Obey the positioning policy in setGeometry.
Task-number: QTBUG-24185
Change-Id: I18dea4fd372e0b2e46273a7a27e0c6f4f4bde771
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QNetworkAccessManager was ignoring the supplied credentials, although
webkit seems to support these urls at a higher level.
Following the behaviour of browsers:
We use supplied credentials if authentication is required.
We add supplied credentials to the authentication cache.
We emit authenticationRequired signal if the credentials were wrong.
We do not use previously cached credentials for that url
Synchronous http requests fail, if the credentials were wrong.
Task-number: QTBUG-18107
Change-Id: If46e8eab1511ba8a0f4bbe0d4efaabc4df0b8ab4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
A number of network autotests are unstable in Windows, so don't
generate check target for them as is done for mac.
Once the tests are acceptably stable, this needs to be reverted.
Change-Id: I18262e28ce40eba541aecf3cfb651bff34698ead
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is similar to the focusColors() failures in QTBUG-23686.
Task-number: QTBUG-23686
Change-Id: I1f01a4e41e61a7a664309be34cfa4fe916a92b15
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test fails intermittently, and at random locations.
Task-number: QTBUG-24322
Change-Id: Ied6dd4d1593066debc0fb48c6ca2a17a1f4d51b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
All of these tests currently hang.
Task-number: QTBUG-24321
Change-Id: I7664b57f6539d4c03008701da66e193019a4440a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
tst_QColorDialog::native_activeModalWidget() hangs, so skip this test.
tst_QColorDialog::task247349_alpha() fails, so XFAIL this failure.
Task-number: QTBUG-24320
Change-Id: Ie4d69e07063e9a648ec4fa3337274143a52ea3e3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The first block of tst_QApplication::quitOnLastWindowClosed() hangs
on Mac OS X, so skip that block for now.
tst_QApplication::testDeleteLAter() both hangs and fails on Mac OS X,
so skip the test and XFAIL the failure.
Task-number: QTBUG-24318
Task-number: QTBUG-24319
Change-Id: Ice11292d84e63215f1bb9e03f3ef369943d1d887
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The default constructor for QSettings does not set NoAccess status, even
if the organization domain, organization name, and application name are
empty. Instead of trying to fix QSettings, keep the existing behavior,
and test for it.
Failures from tst_QSettings no longer need to be ignored, so
mac:CONFIG+=insignificant_test has been removed from the .pro file.
Task-number: QTBUG-22745
Change-Id: Ic9f8b6821c483c217e1ef2ece704be2da169e340
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
- Move palette() from deprecated QtWidgets/QGuiPlatformPlugin
to QtGui/QPlatformTheme, Make it return a const * since
QPalette does not have isNull().
- Initialize QGuiApplication::palette() and
QApplication::systemPalette() from it.
- Do not initialize QPalette from QGuiApplication::palette()
unless app_pal is non-null (default to Qt::black if it is 0).
This avoids initialization order crashes/recursions in the
QPA plugin. Streamline initialization function.
- Remove styleName(), systemIconThemeName() and iconSearchPaths()
from QGuiPlatformPlugin and re-add them as
QPlatformTheme::themeHint().
- Remove styleHint() from QGuiPlatformPlugin, add it to
QPlatformTheme::themeHint().
- Add UNIX themes with factory function (Generic,
KDE, Gnome), taking it from Qt 4.8 code (stripping the
KDE 3 code).
- Implement Windows palettes.
Task-number: QTBUG-24204
Change-Id: Ie27ec035df4f84c42deaffc4816b2e53ce705462
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
- made subdir test depend on echo
- remove SRCDIR and changed to use TESTDATA and QFINDTESTDATA
- added waitForFinish() to handle slow networks
- removed core module header from echo subprogram and replaced
with needed header only
- Added ipv6 skip to connectToIPV6Address() if not available
- Added check QT_BUILD_INTERNAL and skip tests if backend
not available
- Skip permission tests if run as root
- Removed win32 debug and release directory locations so that
application is in known location relative to test data
Change-Id: I58c3c2fca3cd2fee72fdb81d016bb4fd7fe08ac2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- no longer needed after test that used it was removed
Change-Id: I63fc8a9db07f9250507becb9bf6c2aefe0fdc254
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The helper process 'app' wasn't built in release configuration.
Also improved finding the helper executable to utilize
QFINDTESTDATA and print out a proper errors if it could not be
found or started.
Note that adding ".exe" to process name in Windows is unnecessary
as QProcess already does that for you, so removed the ifdeffing.
Task-number: QTBUG-24330
Change-Id: Ibe75e0ecd24181ab623d0a60f17ecaf92052b0dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This allows to drop or paste them into lineedits and text widgets
(including such widgets in non-Qt applications)
Implementation note: this is done on-demand rather than in setUrls
so that it's still possible to setText explicitely; the new code
is only a fallback for when no text/plain data is available.
Change-Id: Ie90c43a30bfa64a6047b627e7351d20bf5ec8e03
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Historically, we've calculated font height as ascent+descent+1.
In Qt 4, a patch was added to work around this by subtracting
1 from the descent of the font engines. We now remove the +1 and
the work arounds.
Change-Id: I7e25d49b97ac892015d3328f32d70eb9a7c2d88f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The watchFileAndItsDirectory() test would fail due to atime updates for
the first watched file coming up to 2 seconds after the file was closed.
Observation shows that the atime has a 2 second resolution on Mac OS X
using HFS+, so add an appropriate delay to make sure that the atime
update from the kqueue based file system watcher can dispatch all
updates.
Task-number: QTBUG-22744
Change-Id: Ie79af20d6b4c154021307c8a8f6d336369720337
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Prior to this commit, the following statement in the qtestlib
documentation was untrue: "If init() fails, the following testfunction
will not be executed, the test will proceed to the next testfunction."
If init() called QSKIP, the test function would be skipped, but if
init() reported a failure, the test function would still be executed
(even though doing so could be unsafe).
This commit makes testlib skip a test function if init() reports a
failure and enhances the selftests to cover skips and fails in both
init() and cleanup().
Task-number: QTBUG-20371
Change-Id: Id1cc8464ae0b8c257ae1b74dbe9189a501f5366b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I30bf175c2c9044e1f8556260a032467ca0dfc09f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I1957ef287ba2f337b5e0b2c6245d872eacb6316f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qcryptographichash to use TESTDATA and QFINDTESTDATA
Change-Id: Ic3a1bdccc9f81605c648dab2a642421d17f7fe80
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed json unittest to use TESTDATA and QFINDTESTDATA
Change-Id: Id29f8257565f409fa184ba465f25bc8454e2b7fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Currently QMetaType API contains almost only static methods. This works
nice until someone needs more information or needs to do more operations
on a type. In this case every function call has to do type dispatch.
This API allows to avoid redundant type dispatching, by caching a
type information in a QMetaType instance. It gives significant
performance boost especially for custom types (up to 9x).
Change-Id: I223d066268402e072e41ca1d0a3e7bc160655d7f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
openStandardStreamsBufferedStreams would fail if standard streams were
redirected to a file (e.g. ./tst_qfile > testlog.txt).
openStandardStreamsFileDescriptors already has a workaround, so apply it
here too.
Change-Id: Iffe9d7864909e489e77c1114e80c4e3bc70a8722
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Instead of refcounting QWindow visibility, we ask the Application
subclass whether quitting is appropriate.
Task-Id: QTBUG-24120
Change-Id: Idd19cc1a3e5742fddded89c7638aaaa5e47c568d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
We should not assume that the first type id is 0.
Change-Id: I17ba6ba57e97ebd495904bfd11235fe458f214e5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
There are no rights for typical user or even administrator to write
directly under c:\ root in windows without rights elevation, so
completionOnLevelAfterRoot() test case failed. Changed the test case
to use an existing directory.
Task-number: QTBUG-24289
Change-Id: I6a8dfc9d1d6ae798b3b9049c542b45fdbdbd9a8c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The XFAILed initStyleOption() case passes on Windows, so do not XFAIL
it there.
Task-number: QTBUG-24297
Change-Id: I9615c408aa7e72b5eb8fe9739903594e45eb5fd7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This autotest checks that meta-methods can be properly inspected
(signature, return type, parameter types, etc.).
Change-Id: I13dc75ec5123280e94ec738dade3f54e427fdbaa
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Run each test in a temporary directory, avoid writing test
files in source/build tree and prevents tests being influenced
by left-overs from previous runs and locks of the application
on the current directory.
- Modify test to be able to use absolute paths to the temporary
directory.
- Skip parts of test removeFileAndUnWatch if a race condition
occurs.
Task-number: QTBUG-24029
Change-Id: I215cc2e0fe6f92d2ffe597b01cdc9c9a39e3c5b4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Do not mark with insignificant_test anymore.
Task-number: QTBUG-22747
Change-Id: I4ef6d5d7e1189b03fd1ab812a0839e3709686e1b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
For template-based connect(), the meta-object is resolved at
compile-time (the virtual metaObject() function isn't called).
But we can make it work by copying the members of the dynamically
constructed meta-object to the statically defined one.
Change-Id: Ia4d3263a89008e36e187c584db6d25d9042f32b3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
moc supports it, so qmetaobjectbuilder should too.
Change-Id: I01475794e928b5a1b659f0dab044933948186971
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The purpose of the hack was to fool QSqlQueryModel into signaling the
removal of extra rows via rowsRemoved(). The extra rows are the
inserted rows generated by QSqlTableModel.
While it is important to signal the removal of all the rows before
requerying after committing changes, there is a cleaner way. The
table model should remove its rows before the query model removes its
rows.
Iterating backwards avoids having to decrement row numbers above ones
being removed.
Expected test results have been adjusted for these changes.
Change-Id: I0e8aa81f5e7b8fea5922f5ffd1cfb4a932313a10
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
QLocalServer could only listen to sockets it created.
Thi is not always possible as sockets may be passed
by socketpair() or have to be created locally by
other means. This adds a similar feature to QLocalSocket
where a native descriptor maybe used.
Change-Id: I43b0af179b3b868dd164d4e1fd312ff4546cf9ff
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Tapani Mikola <tapani.mikola@nokia.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
The fileLineEndingTest case doesn't test network in any way and it is
conceptually wrong, too, as any tests where line endings are an issue
should be handled with .gitattributes rather than forcing user to
check out the repo with unix line endings.
Task-number: QTBUG-24271
Change-Id: I73986993edc227cb68b8f61d51cc1cf458d20989
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
An old coding error meant that the C runtime abort() function was
being called instead of QFtp::abort() when cancelling an FTP download
using QNetworkReply::close()
Task-number: QTBUG-22820
Change-Id: Ib97fda9769b2b55a08c042c66c4444cb6216d2b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Fix up for f5e1da12f0.
Change-Id: I3a730ce7e47d71551a46cc105ba2d1fe4e33b65b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
Rename rows using naming convention used elsewhere in this test.
Change-Id: I8e669cedcc2058cf84cee976c8a0a478bc1cea0a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the codec name instead of just numbering the rows. This eliminates
some duplicate row names. Two duplicate rows have also been removed --
for the WINSAMI2 row, the last value in the row is different, making one
copy do a subset of the testing done by the other, so the row that did
less testing was removed.
Change-Id: I859f681a627e8d3839ca8a4ba09d541bec43d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Marked two tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qnetworkreply
- tst_qsslsocket
Task-number: QTBUG-24203
Change-Id: I9647833bf15fe5a340d7ef59e1dcb007a92677dc
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This function returns true if the file path can be used directly with
native APIs, modulo encoding and path separator conversions. This is
important for applications that interface with other libraries or simply
need to use native APIs together with Qt.
Traditionally, this information was available in QAbstractFileEngine and
forced users to explicitly create an engine or use internal API such as
QFile::fileEngine to access the underlying engine and this piece of
information.
Given its usefulness, exposing the information in a more visible place
is more appropriate. This reduces the need for people to know or care
about implementation details, like file engines...
The existing isLocalFs test was updated and repurposed to use the new
API, instead of relying on file engines and internal implementation
details of QFileInfo.
Change-Id: I65f497bb25741f6f7ea4d2c3b3562c8c4aab8bea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Socket notifier behavior is very OS-dependent. QtNetwork uses non-
immediately (it will return -1 w/ errno=EINPROGRESS). We have to wait
with select(2) to indicate that the connection is ready, then call
connect(2) again. When this happens, we need another call to select(2)
to get notification on the listening socket so that we can call
accept(2) to complete the connection.
The mixingWithTimers() failure happens due to the test expecting a
single processEvents() call to be able to completely connect a TCP
socket. But as described above, this may not happen. The test should
QTRY_COMPARE() to give the test a chance to let all this happen.
The posixSockets() test can fail due to the same connect() behavior. The
test already has a comment about the write notifier behavior being very
OS dependent. This caused the first enterLoop() to return too early,
before the read notifier fired (which is what the test is checking for,
that the read notifier fired). Move creation of the write notifier to
where we expect it to fire, just before writing to the posix socket.
In the same test, the read notifier inside QTcpSocket may not fire after
the write notifier on the posix socket. Use the waitForReadyRead()
function to give the socket a chance to read the data written to the
posix socket.
Change-Id: I541e6ee9a39a92ce3acf6b9ffee51079febe43e4
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
This architecture is obsolete and discontinued.
Support for PA-RISC can be re-added if needed, but it would be preferred
to use the GCC intrinsic support from qatomic_gcc.h (on Linux/HPPA, for
example).
Change-Id: I952e521a2c8c68840df0d44843b5487d5c20b135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For data-driven tests, testlib previously counted one fail or skip for
each data row that failed or skipped, while it counted only one pass
for a test function where all rows passed and counted no passes for a
test function where some rows passed and some rows failed. A similar
problem also existed for benchmark tests, which could run multiple
iterations of the same test, with each fail and skip being counted but
only a single pass being counted for the entire series of iterations.
This commit makes testlib count one pass, fail or skip for each data
row. Test functions that are not data-driven count one result for the
test function, as before. Benchmark tests count one pass, fail or skip
per iteration.
A side-effect of this change is that the test output in plain text, xml
and light xml formats now shows a result for every data row and
benchmark iteration executed, allowing post-processors to correctly
calculate the total number of tests executed. Previously, individual
rows were not shown in the test output if they passed, making such
calculations impossible.
The only change to the xunitxml output format is to correct a bug where
no test result was recorded for a test function if the last data row
was skipped and all other rows passed -- in which case the overall
result should be a pass. Note that there is also a pre-existing bug
in the xunit logger, where no result is reported if all rows are
skipped; that bug is unaffected by this commit.
Task-number: QTBUG-21848
Task-number: QTBUG-22124
Change-Id: I7e17177e10d6e89e55b9684c159bd506f21d002b
Reviewed-by: Ed Baak <ed.baak@nokia.com>
Set QT_TESTCOCOON_ACTIVE environment variable when the coverage is installed
for a test and unset it when the coverage data is saved. Tests that run when
QT_TESTCOCOON_ACTIVE is set are subtests and will not be considered as
stand-alone tests for the coverage.
When a test is run as a subtest its coverage data will not be saved for
itself but for the main test it is merged with. Also its status will not be
reported since only the status of the main test is expected in the test report,
e.g. the test tests/auto/testlib/selftests.
Change-Id: Icfdf99300aae18040e1a3441a8af21f68df4c0db
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
And fix documentation of toString() which said this was the method to
use for displaying to humans, while this has never been true.
Change-Id: Iff6df92e32b2517e1481d4992d80cae2d58da427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Do that by keeping the QWeakPointer that track QObject independent of
the ones that track QSharedPointer.
QSharedPointer do not touch the sharedRefCount in QObjectPrivate anymore
When converting a QWeakPointer constructed from a QObject to a
QSharedPointer, it will display a warning saying one should not do that.
Task-number: QTBUG-22622
Change-Id: I3595e3e7401702410776c458687ab357ad9366ab
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add QEventLoop::ProcessEventsFlags test data for
tst_QEventDispatcher::sendPostedEvents() to test that posted events are
sent when waiting for events and when not waiting.
Change-Id: I99f9eb121d0b1ded725e19c5233922fc0a6b81e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This will test the event dispatcher in corelib for proper timer and
posted event handling. The test makes sure all of the necessary virtual
functions are implemented and working as expected.
This test doesn't test socket notifiers or Win32 event notifiers, as
these are already covered in existing tests.
Change-Id: I5540ffc4e6d7f97bcd6c3725d7e74c0ab9c97015
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Next step is to remove navigate(), but that has to be done in
qtdeclarative first.
Change-Id: I01ea1386c092446be04cc19d0f70adf53f094adc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SVG support is now handled in QtSvg. Previously this test code would
normally be skipped when testing qtbase. This code is only executed
when testing qt5 with QtSvg enabled. This code will be moved to QtSvg.
Task-number: QTBUG-22360
Change-Id: I7372012469f9c0f9b7d3851a0ae696f8f935ba10
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed unload_after_implicit_load() to use full path
- Turned off app_bundle
Change-Id: Ibdf3ae0dc833d97eba64298715eb88c70408fff6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Only run invalidConstructs() tests if not cross compiled
Change-Id: If99fccdf9bca339507ca60c49aa89dc35c535d3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
This fixes a minor bug in VisualIndex triggered when calling
resizeSection with size 0 (but not hideSection).
It is mostly cosmetics - however hopefully there will soon
be a minor refactoring and there is really no need to make
strange code to keep a semantic bug.
However it is also doubtful to make a semantic change
while refactoring.
Change-Id: Ide153e421fd7a634062cb74867f4a49da4bf9cd6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QVERIFY2 and gracefully fail with an error message, rather than
crashing, if getgrgid() fails.
Change-Id: I82a7290f83208486577988cc831d5d3cba20f98e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The test was failing at:
QCOMPARE(property.userType(), qMetaTypeId<CustomType*>());
The CustomType* metatype was not registered before this part of the
test.
qMetaTypeId<T> will register the metatype for T before returning it if
it is not yet registered, while QMetaProperty::userType() returns 0 if
the metatype is not yet registered. However, the order of evaluation of
these two expressions in the above statement is technically undefined.
Apparently, gcc evaluates the arguments in order from right to left,
allowing the test to pass, while clang evaluates the arguments in order
from left to right, causing the test to fail.
Change-Id: I5059556e860cec29b57c31e4e26f46cf9e6055da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
- testCustomRuntimeDirectory test skips if run as root
Change-Id: Idcc2a1db5d8a96b2ec0248b8b1c392fffc0b2e11
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Added checks to see if running as root and skip as needed
Change-Id: I4f94d5bfe511c6dfda315854b7cd1f64efe6e4f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When run as root was able to move file to /etc directory but was
expecting a failure.
Change-Id: Ic2ac5506253f2a3395ed56e88a856542bf82ad6d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Correct a bug in the test and use unique names for data rows. The bug
was that the test assumed that QCOMPARE for float values 100001 and
100002 would fail, but it actually succeeds. QCOMPARE for floats uses
qFuzzyCompare(), which succeeds if the numbers differ by no more than
1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes,
while QCOMPARE(99998, 99999) fails.
Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of the subtests are only run with plain-text output format. For
those subtests, the other output formats were unused and gradually
becoming out-of-date.
Change-Id: I4c10f7f5bab2d2cc7d2d2ad641fbf5d4df02b798
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Our OSX 10.7 test machines send a SIGILL rather than a SIGSEGV to a
process which attempts to dereference a null pointer.
Change the "crashes" test to dereference an invalid pointer with a
value slightly greater than 0 so that we get the same crash behavior on
all (unix) platforms.
Change-Id: I700a2c7d654a9468af5e5996010a258695ed2ae5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To hide the IsPointerToTypeDerivedFromQObject monstruosity :-)
Documentation for Q_DECLARE_METATYPE and qRegisterMetaType was updated
to mention requirements on registered types and how they can be
circumvented for pointer types with the new macro.
Change-Id: If83b037a8e2f28761eb903525e87008107298801
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is possible to do this for example:
QVariant v = QVariant::fromValue<MyCustomQObject*>();
QObject *object = v.value<QObject*>();
This means that if a QVariant contains a pointer to a QObject
derived type, third parties can extract a QObject* and use its
properties without knowing the concrete type.
This is a source compatible change.
Change-Id: Iee9a9437e99cc2f40d1a4bfea47275482ef7161f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Previously, if any fields in the supplied record could not be matched
with a column in the target table, dataChanged() was supressed for all
columns for OnManualSubmit. This is not good because it prevents other
views from noticing the fields that *do* change.
It's simplest and probably more efficient just to emit
dataChanged() once for the whole row. Fewer signals need to be
processed and in typical cases much or all of the row is likely to
be changed anyway.
Change-Id: Ib56bf9a18e51b9cb85771acefcb2bf26e295a54e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In an apparent attempt to be economical with emitting dataChanged()
and submitting SQL to the databse, setRecord() compares each field
value of the record with the old value, taking action only when
a difference is detected. Several complaints against this code are:
-The comparision does not work on float type.
-It is really up to the application and database to decide this. The
model should make few assumptions. The application has the option to
omit fields from the record that should be ignored.
-The current behavior seems to assume that the "old" values are the
current state of the database, but the database may have changed since
the model was last refreshed.
-The code compares the value from record(), which probably
corresponds to the EditRole, with the DisplayRole value from data().
Change-Id: I11477c185eb411d442144dc682893d0df12d03d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When text has been selected in a QTextEdit and the left or right arrow
key is pressed, the cursor moves one character beyond the start or end
of the selection, when it shouldn't move past the selection. Fixed by
moving the cursor to the right place when a selection is active.
Task-number: QTBUG-22853
Change-Id: I9ea1863436db98627a6fd041ce554cf10be26493
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
(cherry picked from commit 1b031759ddfdab9703dfecac13f1ed318da3dafe)
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
QMetaObject::invokeMethod attempts to deference the extradata for
meta objects versions 6 and greater which is causing a crash in some
of the qtquick1 tests.
Change-Id: If5b2ca83b15de2cd558976c6b681dd5457c404d1
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Correct the implementation of cutText and copyText in QAccessibleTextEdit so
they use cut() and copy() methods of QTextEdit
Cherry picked from Qt 4 - 36202cf8fca822492615d418bd563a40bee4af08
Change-Id: I86a531ed7059b1a928cb8515c2743d4d8b596b36
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Previously, ignored messages were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data row in a data-driven test function didn't cause all of the expected
messages to be generated, the remaining messages would be carried over
to the next data row. This would result in errors about missing
messages being associated with the last data row rather than with the
correct data row.
This commit makes testlib check for missing ignored messages after
running each data row rather than only doing so after the last data
row.
This commit also adds a regression test to demonstrate that ignored
messages can no longer be carried over from one data row to another.
Change-Id: Ibee51aa6e96866fbcbcb4acee1a8340a86a6a4ba
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, expected failures were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data-driven test function called QEXPECT_FAIL and then didn't perform
any further verification steps to trigger the expected failure, the
expected failure would be carried over to the next data row, probably
causing the first verification step in the test function to XPASS (with
a seemingly irrelevant error message) for the next data row.
This commit adds the new function QTestResult::finishedCurrentTestData()
to cleanup after each data row is executed. This function treats calls
to QEXPECT_FAIL without subsequent verification steps as a test failure.
This commit also adds a regression test to demonstrate that expected
failures can no longer be carried over from one data row to another. If
run against the previous version of testlib, the new test would report a
pass instead of an error.
Change-Id: Ida5c7f080815b0dca9531131fed582b0918334cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWidget::isActiveWindow() was being checked in QAccessibleWidget::state
to determine if a widget is focusable. As a result, focusable widgets
were reported to be not focusable when the window was not active.
Change-Id: I73c47181ed132a84f0251cb67d0e20912e29a1a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.
Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.
(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)
Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Qt 5 seems like a welcome opportunity to stop emitting this
spurious beforeDelete signal.
Change-Id: Ib8628343ca9b8fdd85c154a206c7e2bf2c4c9dc1
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The open test case tests opening a device path on windows.
As this requires privilege elevation, the test fails when running
nmake check from a console.
As the CI machines appear to run tests with admin privileges, first
check opening the device using the windows API. If that succeeds, then
opening using QFile should succeed. If that fails, the opening using
QFile should fail.
(Since Windows vista, members of the "administrators" group do not run
at elevated privilege all the time. The user needs to opt in via a
UAC prompt or "run as administrator". This is similar to using the
sudo command on unix)
Ran the test as administrator and normally. Now passes in both cases.
Change-Id: Ibd7682eceb61e35d4912fa0392df536f4331f6ed
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Simplified the raster engine by treating image formats in a more
generic way and removed some unused code.
Change-Id: Ib3979a1a6e3e6f17c5002248545779ec36fff7c9
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QMetaType used to register a typeName and factory functions for
creation/destruction of objects. While it would be possible for a single
type name to be registered matching different actual types and memory
layouts, there was little that could be done about it.
Now that QMetaType is tracking type information with a direct impact on
data layout and ABI (size and type flags) it is important that we check
and detect binary incompatibilities as early as possible.
[Such incompatibilities could arise from type name re-use (technically,
ODR violations) or, more commonly, as version mismatch between different
shared libraries or plugins.]
Only type size and flags are checked as function pointers to inline and
template or otherwise non-exported functions could trivially differ
across translation units and shared libraries.
When registering typedef types, a check is made to ensure the same name
doesn't get registered as different types.
Change-Id: I8211c3de75d4854ce8fafdb620d3a931c206e0c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The function hasn't been working properly. It was not well tested, for
example it is undefined how QVariant should behave if it contains an
instance of an unregistered type.
Concept of unregistering types was inspired by plug-in system, but in
most supported platforms we do not unload plug-ins.
Idea of type unregistering may block optimizations in meta object
system, because it would be not possible to cache a type id.
QMetaType::type() could return different ids for the same name.
Currently QMetaType::unregisterType() is not used in Qt.
Change-Id: I878b6e8d91de99f9bcefeab73af2e2ba0bd0cba0
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
There is no point in keeping separate values which should mean the
same.
QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.
Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.
Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
The QNetworkReply finished signal does not have a bool parameter.
Change-Id: I87bd0410545f7a2fc2ab63cca90548f0585bf7a0
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ic958c4e5c15dd53a48479099b6b07803af6cb789
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
