Redirecting on every command is wasteful.
Change-Id: I42e7ef1a481840699a8dffff1404fa0602805d1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's easier to parse than qglobal.h. The objective is actually to have
macros with parts of the version number, so the major or minor numbers
could be used in other preprocessor macros.
Change-Id: I42e7ef1a481840699a8dffff1404eda1dd5c308d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
KMS is no longer a platform plugin so the relevant leftover bits are
now removed.
As the introduction of the EGLDevice-based backend for eglfs shows,
using DRM/KMS is not tied to GBM, separate buffer management
approaches, like EGLStreams, work fine as well. Therefore separate KMS
from GBM and remove the EGL and GLES dependency in the tests - this
way there is nothing preventing us from using GBM without GL for
example.
Change-Id: Id7ebe172b44b315f9a637892237d2bb62d99aed2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
For now we pick one crtc and find the corresponding layer. If this is
not desired, set QT_QPA_EGLFS_LAYER_INDEX to override the layer to be
used. Enable qt.qpa.eglfs.kms to get logs about the available layers.
Change-Id: I762783f960739e32966c8cde17d8f55fbe40091f
Done-with: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
-xvideo was not used even by Qt 4 for a long time.
-xinerama was used by the xlib plugin which was dropped
by e6a7a6a381.
Change-Id: Iea97f643570d98f84ad1ce6f16e911dc92d617b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
It's obsolete since e6a7a6a381
(Remove xlib plugin) and a2337f79ff
(Remove Windows and X11 from src/widgets/platforms).
The actual option is -xinput2.
Change-Id: I28bf03963a8edc5c69330605ba072fbfaefb05e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][QtDBus] The QtDBus library now links directly to the
libdbus-1 system library if it was detected at configure time. To force
linking to the library, pass option -dbus-linked to configure; to force
dynamically loading at runtime, use -dbus-runtime.
Task-number: QTBUG-14131
Change-Id: Ie33d1f22f85b465ab0ce166b8f17b8491eae1c21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the purpose is to make build log parsers able to ignore build failures
in verbose configure output.
Change-Id: I01af2e019fd1b055fdfcf6749faeebacb7a39c3f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to the proprietary Mali Linux driver bundle from ARM, there
are a couple of semi open source alternative bundles out in the wild,
which are mostly derivatives from the sunxi-mali bundle.
The non-ARM bundles lacks the proprietary header file fbdev_window.h
which defines the fbdev_window struct. Instead, it has an equivalent
mali_native_window struct in the EGL/eglplatform.h (which in turn is
included by EGL/egl.h).
This change adds an alternative configure test which detects the non-ARM
bundles are used. It also removes the dependency on fbdev_window.h by
defining the structure ourselves, which actually makes the plugin
potentially compilable with *any* EGL SDK.
Change-Id: I78ab4b618e8e9c774c889fe9896105cf2cf4228e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The C++ standard says it must, but some badly-configured toolchains seem
to be lacking support.
In particular, for some 32-bit platforms without native support for
them, GCC implements 64-bit atomics via out-of-line functions in
libatomic. If that library is missing... well, then std::atomic 64-bit
doesn't work and we mustn't try to use it.
This was found when trying to compile Qt 5.6 for MIPS 32-bit:
Linking library libQt5Core.so.5.6.0
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::load(std::memory_order) const':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:500: undefined reference to `__atomic_load_8'
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::store(unsigned long long, std::memory_order)':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:478: undefined reference to `__atomic_store_8'
Yocto bug report: https://bugzilla.yoctoproject.org/show_bug.cgi?id=8274
Change-Id: I42e7ef1a481840699a8dffff140224d6614e5c36
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ppc/ppc64 and 32-bit x86 have been dead for a while.
consequently, the legacy macx-g++-64 spec was most probably not used.
which in turn meant that NATIVE_64_ARCH was never set (in particular on
windows hosts ...), which means that the android ndk host auto-detection
was effectively broken.
the arch code in mac/default_post.prf was also never triggered, so nuke
it as well.
Change-Id: Ic0775e40b273a22e0a15808cac328e0df33c2155
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As planned for 5.6, QtMultimedia now uses GStreamer 1.0 over
0.10 when available.
This means the binary packages will be based on GStreamer 1.0.
Task-number: QTBUG-47920
Change-Id: I9a18569ff96902116f0f6a759c185a5896f520d5
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This will allow us to drop gtk2 support from qtbase in future,
while still providing the gtk2 style for those who want to use it.
Also with moving to qtstyleplugins, the code can be simplified
because we can directly link to libraries we need, instead of using
QLibrary.
[ChangeLog][QtWidgets] Remove QGtkStyle, it is now provided in
qtstyleplugins repository.
Change-Id: I6221b1a513d7fda32e080f3ca159b0b2f8a8f246
Reviewed-by: Timo Jyrinki <timo.jyrinki@canonical.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jens Bache-Wiig <jensbw@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
SecureTransport is now the default SSL backend on OS X.
Users can still choose the OpenSSL backend by passing the -openssl,
-openssl-linked or -no-securetransport option to configure script.
[ChangeLog][Important Behavior Change] Make SecureTransport the default SSL backend on OS X
Change-Id: I7a4edfdb72e63975d6b31435969702f8e86a10f2
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
[ChangeLog][QtCore][Logging] Systems with syslog may now pass -syslog to
configure to send logging output to syslog.
Change-Id: I80d58ee6e70d8deb2409fc666e7e7f2d7f52b8e1
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Also solves a warning printed:
configure: 4200: shift: can't shift that many
Change-Id: Ib306f8f647014b399b87ffff13f295e2cdb7f8d7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The pipe2/dup3/accept4 functions and SOCK_CLOEXEC are quite old nowadays
on Linux. They were introduced on Linux 2.6.28 and glibc 2.10, all from
2008. They were also picked up by uClibc in 2011 and FreeBSD as of
version 10.0. So we no longer need the runtime detection of whether the
feature is available.
Instead, if the libc has support for it, use it unconditionally and fail
at runtime if the syscall isn't implemented.
Change-Id: Ib056b47dde3341ef9a52ffff13efcc39ef8dff7d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There's really no difference between them, other than -force-pkg-config
skipping the check if the tool is even available and printing a warning.
Change-Id: I04cb83c6649ef73866a84032ea46093c4a00ce00
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Otherwise the information is missing from configure's output summary:
EGLFS ................ no
EGLFS i.MX6....... .
EGLFS KMS .......... no
EGLFS Mali .........
EGLFS Raspberry Pi .
EGLFS X11 .......... no
Change-Id: Iee8cbc07c4434ce9b560ffff13cb331778c70261
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The option is named securetransport, not secure-transport.
Change-Id: I5efdde6d751cbc7e9717c6bfe0add93c5dbd2ec9
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This way we can exclude the connection plugins from being compiled
if it's off.
Change-Id: Ic5ea1d35ea9f5929420268a1aefebf0464d8520b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We build our 32 bit Linux packages nowadays on Red Hat 64 bit with
-platform linux-g++-32. Honor this when selecting the right licheck
binary to use.
Change-Id: I08527295bc461c8cdd07e81a10c93a8f010b787d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Switch to using the pointer events from XI2 when touch is available (i.e.
version is >= 2.2). This allows us to select and grab the button and motion
events together with the touch ones. This prevents the issue of not getting
touch events when grabbing via the plain xcb functions.
To prevent touch sequences from being replayed after ungrabbing (for example after
dismissing a popup that caused a grab), we try to accept touches via XIAllowTouchEvents.
Unfortunately this leads to a deadlock and therefore we can only do it when we know
we have a new enough libXi. This is a configure time check which is not ideal since
the system on which apps run can have a newer libXi than the machine that did the Qt
build, but seems like the best we can do.
The environment variable QT_XCB_NO_XI2_MOUSE can be set to 1 in order to prevent
processing mouse events through XInput. This restores the old behavior with broken
grabbing.
[ChangeLog][QtGui] Pointer event delivery on X11 is now done via XInput 2.2+ when available.
Done-with: Michal Klocek <michal.klocek@theqtcompany.com>
Done-with: Alexander Volkov <a.volkov@rusbitech.ru>
Task-number: QTBUG-43525
Task-number: QTBUG-45054
Task-number: QTBUG-30417
Change-Id: I7cb2002b31bef4cd527aa427549dcf2d5467968e
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Check for a valid license not only in configure, but also in qmake.
To limit the runtime overhead we cache the day of the last run in
a .stash file. This allows us to run licheck only for the top-level
qmake call, and only once per day.
This requires an updated licheck executable that supports the new
check mode.
[ChangeLog][Tools][qmake] For commercial builds, qmake now checks for
a valid Qt license. This requires setting up a Qt Account (or
.qt-license file) on the development machine.
Change-Id: I2c2a05a4602cc661560568b76ddf520cb8134769
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In the unix commercial packages, licheck so far has been a shell
script that redirected to the 'right' licheck. To simplify things
we now resolve the right executable path in configure itself.
Change-Id: I1183d000a11bf42729f3e0405a0bc1d4b618933c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Starting with Qt 5.5 qtconnectivity on iOS is supported
Change-Id: I30430ce351b7e2fc8031c5719bed5354ed234cc7
Task-number: QTBUG-45988
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Defaulting to absolute_library_soname on configure -rpath is no longer
necessary as now we support @rpath install name ids on OS X and iOS.
This also sets QMAKE_SONAME_PREFIX to @rpath for Qt modules when built
with rpath configuration.
This makes Qt libraries relocatable on OS X. Qt SDK is not yet
relocatable though, because plugin locations (including cocoa plugin)
are still resolved using absolute path (see QTBUG-14150). Also, there
are several absolute paths hardcoded in qmake mkspecs pri files.
Task-number: QTBUG-31814
Change-Id: I36b9384cd69ac609608acbe2b3d5e0512317e0d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
this allows LD_LIBRARY_PATH to take precedence over the hard-coded
rpath, which is the only sane thing to do (which is also why i'm not
adding an option to disable it).
this behavior is consistent with non-linux systems.
the windows version has no auto-detection, just like for gold linker
usage.
Task-number: QTBUG-3069
Change-Id: Ief9ba032291c898d75d76ecc740390954382a804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
subsequent tests should depend on the detected linker, obviously.
Change-Id: I09aa9f1f2ef789f0ae0829f9122211fc4e1ad518
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this function does not just compile, but it also links, so the output
file should have no object file extension.
Change-Id: I65dd9bd334478545ceeabe9d1aacb44d9583cdd7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Test each include file directly, instead of doing a large #include. This
verifies that each header is compilable on its own. One big advantage of
doing it via a special compiler in qmake is that we skip pre-compiled
headers, which has hidden build errors in the past.
This solution is implemented by making syncqt produce a second list of
headers. This list is the same as the list of headers in the source
code to be installed, minus the headers that declare themselves to be
unclean, via the pragma:
#pragma qt_sync_skip_header_check
This mechanism is applied only for public libraries (skipping
QtPlatformSupport, an internal_module).
This test is enabled only for -developer-builds of Qt because it
increases the compilation time.
On QtTest: the library only links to QtCore, but it has two headers that
provide inline-only functionality by including QtGui and QtWidgets
headers (namely, qtest_gui.h and qtest_widget.h). If those two modules
aren't getting compiled due to -no-gui or -no-widgets to configure, we
need to remove the respective headers from the list of headers to be
checked. If they are being built, then we need to make QtTest's build
wait for the headers to be generated and that happens when qmake is
first run inside the src/gui and src/widgets directories.
Change-Id: I57d64bd697a92367c8464c073a42e4d142a9a15f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Unlike all the QMAKE_* command variables it requires the arguments "cqs"
to be part of the variable. This means we need to append the arguments
for compatibility with autoconf.
Change-Id: I961e89d506612873ba1f9cbecff97c448e83a5a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
that also covers linkerSupportsFlag(), which did it explicitly so far.
Task-number: QTBUG-45010
Change-Id: I2eb0bd5282fd2f24c9ab8041c3536a6115caa765
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
eglfs does not depend on the device makespecs anymore when it comes to these device
integration backends (hooks). Instead, backends are autodetected by configure.
The name of the preferred plugin is still set in the device makespecs. This
is optional. When not set and there is more than one plugin present in the system,
the environment variable QT_QPA_EGLFS_INTEGRATION will have to be set at runtime.
In the absence of that, the order is undefined.
Change-Id: Ie1ced2c9aa1beff2adb13b4fdea7c499cb5a6aab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
When using default configure value (auto) for libudev + libinput and
libudev is not available, disabling libinput failed and it is enabled
even it requires libudev to work.
Change-Id: Ia2ead66c5cebc8658f2c29445f5c81c9f8b30dc8
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Allow setting of pg_config path for cross compilation where pg_config is
not in the command search path (do the same as for mysql_config).
This is e.g. used for buildroot (see [1] for details).
[1] http://lists.busybox.net/pipermail/buildroot/2015-February/119714.html
Change-Id: I11d084496ffbb6f8bc350dbcf2971a5be8e3b346
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Recently, a dependency on Qt D-Bus was added to
Qt Platform Support if Qt was configured to support it. Since
Qt defaults to checking for Qt D-Bus at run-time, the platform
plugin and thus all applications would depend on libQt5DBus.so.
Qt D-Bus really doesn't make much sense on Android, so we default
to disabling it instead on this particular platform. People
with use cases where this might be used can still configure Qt
to include support by passing -dbus to configure.
Note that this makes OS X and Linux builds consistent with
Windows builds, where Qt D-Bus was already disabled because
the dbus.h header was missing.
Change-Id: Id733ff00918c706bf1aa5a667299e7d578b4b0c1
Task-number: QTBUG-44581
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
While the -fuse-ld=gold flag is related to linking, it is an argument to the
compiler driver to tell it what linker to execute, NOT an option to tell the
linker to behave differently.
So it shouldn't get prefixed with -Wl when passed though the compiler driver.
Change-Id: I2b50cb6d2bd8911aa9b305cd8e755d4dfe923041
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
spaces in the source dir are not supported for now, as that requires
some more profound refactoring of the bootstrap makefiles.
Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
apart from being more readable, it has the side effect of being resistant
to spaces in the build path.
Change-Id: Id12603c3a96765913e747fba4070d49de0705315
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Including math.h can pollute the default namespace, and break
some compilers if cmath versions of the method are declared as using.
Switching to C++ math functions also greatly simplifies handling of
float qreal as C++ automatically chooses the right method.
[ChangeLog][QtCore][QtMath] qmath.h no longer includes math.h, so any
sources depending on that indirect inclusion may fail to build.
Change-Id: I4d0e331dafba354ec05dc5052e61ef4ff8d387fe
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Qt Multimedia can be compiled with either GStreamer 0.10 or 1.0.
0.10 takes precedence over 1.0 if both are available (1.0 will be used
by default in Qt 5.6).
Auto-detection can be overridden with -gstreamer <version>.
Change-Id: I74d58d2c146c842902375b4d1e5e6e96d32addac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
To ensure QtCore can be rebuilt and get the exact same results,
it is undesirable to hardcode the build date into the library
Also deprecate QLibrayInfo::buildDate since it is relies on the build
date. QLibraryInfo::buildDate was originally meant for evaluation
licenses and such, but isn't used for that any longer.
Change-Id: I98e91ca3e55f877e6ac0e02de289dc29422fc9da
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Option -separate-debug-info is not enabled by default, even help
claims it to be enabled.
Change-Id: I4a986acbb2b7f2c7bf7feaaff29bcc6bfadcc559
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
It will be used on Unix systems if the required dev package is
present. (Detected by a configure compile test.)
You can configure with -no-libproxy to avoid the dependency.
It will not be used on OS X or Windows, as we already implement
the native API for getting proxies there.
Currently we use whatever PAC runner is provided by the distro
for running PAC scripts - if we want to run PAC scripts using
Qt, then we would have to implement a pacrunner plugin to libproxy.
Note that their webkit pacrunner is using javascriptcore already.
Tested using the libproxy 0.4.7 that is included in Ubuntu 12.04.
Re-tested using Ubuntu 14.04 which ships libproxy 0.4.11.
It works except when both socks and http proxies are configured in
the manual settings - in that case libproxy returns only the socks
proxy. This seems to be covered by libproxy issue 119.
[ChangeLog][QtNetwork] Introduce libproxy backend for Unix platforms,
enabled automatically if the required dev package is present
Task-number: QTBUG-26295
Change-Id: I521c0a198fcf482386ea8a189114a0077778265c
Reviewed-by: Richard J. Moore <rich@kde.org>
these reflect the on-target paths (unlike /raw, which are host paths, just
without the -sysroot). this is necessary for anything deployment-related,
starting with RPATH.
Change-Id: I13d598995d0e4d6cb0dc1fc7938b8631cf3e3a95
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this cuts down the bloat in the binaries and the binary patching
requirements in the installer.
as a side effect, the sysroot and makespecs are not binary patchable any
more as well, which is ok, as the installer does not do it anyway.
we now also warn if -[host]<foo>dir is not a subdir of -[host]prefix, as
putting things outside the prefix is anti-thetical (the obvious
exception being the (unix-only) -sysconfdir).
Change-Id: I878f0e71a4dfcfd55b2f8b1cf3045b98b502569b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason at all for it to be an external script.
Change-Id: I836f38dd06f61350dd9f83015857abb07981c62d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We don't yet have API compatibility, apparently, so we need to keep up
with those changes.
Dropping support for older versions is not yet acceptable since some distros
(in particular current version of some embedded ones) may ship these versions.
Change-Id: Ibea780abd76c4b89661012dfea46868b432ded42
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Add support for SSL on iOS/OS X by adding a SecureTransport based
backend.
[ChangeLog][QtNetwork][QSslSocket] A new SSL backend for iOS and OS X,
implemented with Apple's Secure Transport (Security Framework).
Change-Id: I7466db471be2a8a2170f9af9d6ad4c7b6425738b
Reviewed-by: Richard J. Moore <rich@kde.org>
With change macro is in line with QT_NO_<feature> style of naming
macros. This way it will also be automatically added to file
mkspecs/qmodule.pri in QT_NO_DEFINES value.
Change-Id: I111d07fd015994290c54e00e8aac2d6dbdb7de9e
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Commit d44781730c disabled use of pkg-
config on Mac, which in turn automatically disables all of the tests
that depend on pkg-config too, like D-Bus. If you then use the -dbus
flag, configure would error out telling you that it couldn't find D-Bus,
despite it being there.
Now we print some helpful information on error and extra information for
finding out why it may have got disabled.
Change-Id: Ic4e41c58d62d80eb1a0f3ca1c93529e049aaf231
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It was not possible to determine whether Qt is being built as
a shared or static library in the config tests, as that information
was not added to QMAKE_CONFIG used in the compileTest function.
For linking to ICU on Windows, there is logic which depends on
it in config.tests/unix/icu/icu.pro, but was broken for the static
target, as the expected library name was not found (icuXX -> sicuXX).
Change-Id: I22c2d543ea14feebbad36961c9a29e99f66323ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Adds a configure check for System V and POSIX IPC.
System V takes precedence over POSIX IPC, and if both
are not supported, QT_NO_SHAREDMEMORY and
QT_NO_SYSTEMSEMAPHORE are defined.
This patch is a forward-port from 4.8 branch
(6ef4abaa9cd7d465cbae5cbf8cb4664bef387d10).
Change-Id: I3ec20342f0f0266843479634109b67c6989dd296
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit a2da88712f was incomplete. Though
it did enable building of QtDBus without the libdbus-1 headers, but it
still kept looking for it. We don't need to do it anymore if CFG_DBUS is
the default (runtime), so skip the actual check.
This commit does not change behavior. All it does is skip the D-Bus
tests if we're about to use dlopen'ed libdbus-1.
Change-Id: I3947443c9ef6cc409cb6b154564f8af6fb5de84e
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When CFG_DBUS != "no", we enable the build of linuxaccessibility in
src/platformsupport, which requires QT += dbus to work. When no dbus
headers are found, CFG_DBUS is set to runtime, which means we'll
enable a11y but "dbus" will not end up in qconfig.pri and therefore
src/dbus is not built at all (and not before platformsupport). Therefore
the build in platformsupport breaks.
So even if CFG_DBUS is set to "runtime" we need to make sure that dbus appears
in qconfig.pri.
Task-number: QTBUG-43205
Change-Id: Ibbe5e66552226cdcc1ce16fb83556406f3bb0e09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Supports relative pointer, axis, keyboard and touch events.
libinput support is only available in combination with libudev.
libxkbcommon is required to perform key mapping. For now the
default keymap is used always (selected when building xkbcommon).
[ChangeLog][QtGui] Added a plugin to get mouse, keyboard and touch events
via libinput.
Change-Id: I469d8992c0cd3e79225cefaeb931697baf86a92b
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
... and use it with the opengl compile tests.
Change-Id: I402574be332e41c721a758e63a233d193224f16b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The compile.test script expects -I... parameters. Passing just the
include path is therefore wrong. Pass cflags instead.
Change-Id: I0f9b155d1e710fe7d77c64a867a89290d4f31db3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Most of QtDBus already needs very little from libdus-1, so create an
extra header containing the minimum API we actually need.
One large advantage of this solution is that now QtDBus can always be
enabled, even if the system doesn't have libdbus-1 installed. This is
interesting on OS X, where libdbus-1 is often installed by Homebrew or
MacPorts, which may include extra libraries we don't want in our
packaging.
Change-Id: I1b397121ec12eeca333ef778cf8e1c7b64d6b223
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
There was an override for Android which would disable the configure
error when doing an OpenSSL build without having the headers
available. This has several times lead to packaging errors where
OpenSSL gets disabled but it's not noticed before the package testing,
which delays the process.
I'm not 100% sure of the reasoning behind the override, but I think
it's a left-over from Necessitas where OpenSSL was statically linked
into Qt.
Change-Id: I2bdc33fb60c59cd493987959d4bbbbb4e9735a92
Task-number: QTBUG-42851
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The new default compler is gcc 4.9, it is needed to compile
64 architectures.
Change-Id: I7ccbac7615b6dc20f5b0441908590de7d4a2e8cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The change was made too late in the 5.4.0 release
cycle, and broke the Qt build and deployment in
several areas:
- macdeployqt
- OS X 10.7 builds
- shadow builds
This reverts commit c0a54efc40.
Change-Id: I1c1ad4901228f5516352ccdfa963e8ea2b5013b6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
configure script has been silently accepting whatever flags that begin
with "-feature-" even if the feature name does not exist at all.
Since the script validates many other flags, this behavior can make
users believe flags they supply is valid when it isn't.
Besides, this option is currently not protected against typo in any way.
This commit verifies those flags against content of
"qtbase/src/corelib/global/qfeatures.txt" and fails if supplied
flag is not a valid feature name.
Change-Id: Ib19ec66dd5558fb5491e8e080ce07d4807d94c1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Apple will from February 1, 2015, require all applications uploaded to
the App Store to be built for both 32-bit (armv7/s) and 64-bit (arm64).
https://developer.apple.com/news/?id=10202014a
We enable fat Qt binaries by passing both -arch armv7 and -arch arm64
to clang, which takes care of lipoing together the two slices for each
object file. This unfortunately means twice the build time and twice
the binary size for our libraries.
Since precompiled headers are architecture specific, and the -Xarch
option can't be used with -include-pch, we need to disable precompiled
headers globally. This can be improved in the future by switching to
pretokenized headers (http://clang.llvm.org/docs/PTHInternals.html).
Since we're enabling 64-bit ARM builds, we're also switching the
simulator builds from i386 to fat i386 and x86_64 builds, so that
we are able to test 64-bit builds using the simulator, but we're
keeping i386 as the architecture Qt is aware of when it's building
for simulator, as we need the CPU features to match the lowest
common denominator.
Change-Id: I277e60bddae549d24ca3c6301d842405180aded6
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Defaulting to absolute_library_soname on configure -rpath is no longer
necessary as now we support @rpath install name ids on OS X and iOS.
This also sets QMAKE_SONAME_PREFIX to @rpath for Qt modules when built with
rpath configuration.
This makes Qt libraries relocatable on OS X. Qt SDK is not yet relocatable
though, because plugin location (including cocoa plugin) is still resolved
using absolute path (see QTBUG-14150), also there are several absolute paths
hardcoded in qmake mkspecs pri files.
Task-number: QTBUG-31814
Change-Id: Ie9dffefcd2a946c1580293d433621c1adb7e06c4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
We set the variables to empty when we start processing, so ${FOO-foo}
will never print "foo". We need to use ${FOO:-foo}.
Change-Id: I00c28edb10d8eaa09df689905a302b576b246806
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Fixup after d44781730c, which would override whatever the user passed
on the command line.
Change-Id: If4d260801866ff53de3e6dfd6d37016fd8453d8d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
GCC and Clang support compiler intrinsic error detections tools:
address, memory, thread, undefined
Let users conveniently enable it in qmake, for instance with
CONFIG += sanitizer sanitize_address
Also add a -sanitize [...] option to configure to use it by default
for both the Qt libraries, and user applications.
[ChangeLog][configure] Added support for GCC/Clang -fsanitize= options
Change-Id: Ie5418abcdf41842566df510d7707e41739e66f87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The code which extracts style assets for the Android style
is licensed under the Apache license, which is not compatible
with LGPLv2.1. It is, however, compatible with LGPLv3. This
means that the Android platform plugin cannot be LGPLv2.1
as long as this code is included.
To minimize licensing confusion, we default to only providing
LGPLv3 for Android. If you want to build a LGPLv2.1-compatible
library, you can add -no-android-style-assets to the
configuration. This will in turn enable the LGPLv2.1 in
the configure output, and it will disable the extraction
code in the platform plugin.
Running the Android style with an LGPLv2.1-compatible platform
plugin will work, but it will look horrible.
[ChangeLog][Android] Default open-source license for
Qt for Android is now LGPLv3. For compatibility with the LGPLv2.1
license, add "-no-android-style-assets" to your configuration.
Change-Id: I6c7b52140f38138520871fa7c69debbb4ee90e6c
Task-number: QTBUG-41365
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
This license file has to exist, since much of the code is licensed under
LGPLv3.
Change-Id: I2795a7cc62f6de65a35921e38d2ab5f8f0233f71
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't have an explicit XPLATFORM_OSX, but XPLATFORM_MAC applies
to both OS X and iOS (as now clarified), so we move the default
out of the XPLATFORM_IOS scope and to a XPLATFORM_MAC scope.
Change-Id: I6b9ba9c881c28def08b9ab863d0165fbd9dedc6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Gestalt is deprecated so we can't use it long term. At the same time,
the new API is cross platform, so we'll no longer have to parse strings
in -[UIDevice systemVersion] either.
Change-Id: Ic81797174c1a3d50b47b9b209205a6a506cc75ef
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
qmake variables using $$system() were incorrectly parsed by the custom
qmake parser in the configure script, when using GNU awk 3.1.8 or
earlier. They are parsed correctly with GNU awk 4 or mawk.
This was occurring with such an assignement (from an extra mkspecs file):
QMAKE_CC = $$system($$CMD QMAKE_CC 2>/dev/null)
The custom qmake parser in the configure script first attempts to
expand $$UPPERCASE variables, before running $$system(), using this:
match(value, /\$\$(\{[_A-Z0-9.]+\}|[_A-Z0-9.]+)/)
But when using non-ASCII locales with GNU awk 3.1.8 or earlier,
$$system was expanded (to an empty string) because these earlier awk
versions match lowercase letters for the [A-Z] regexp, which is
traditionally used to match uppercase letters.
This behavior has been changed in GNU awk 4.0.0, which only matches
uppercase letters for [A-Z] by default. A workaround for earlier GNU
awk versions is to run awk with the C locale.
See GNU awk NEWS "Changes from 3.1.8 to 4.0.0":
25. Gawk now treats ranges of the form [d-h] as if they were in the C
locale, no matter what kind of regexp is being used, and even if
--posix. The latest POSIX standard allows this, and the documentation
has been updated. Maybe this will stop all the questions about
[a-z] matching uppercase letters.
THIS CHANGES BEHAVIOR!!!!
See also gawk.info "A.7 Regexp Ranges and Locales: A Long Sad Story"
Change-Id: Ibb3eb28738c3e77d496c634e1f5c9f630957e730
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes missing space before `]` in test condition introduced in 8d57725338.
Change-Id: I741c291677f32056a0a0bec12cb4d9fd293a2021
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes] HarfBuzz-NG is now the default
shaper on all platforms. This results in a better shaping results
for various languages, better performance, and lower memory consumption.
Task-number: QTBUG-18980
Change-Id: I4d9454fc37e9050873df3857e52369dfc7f191b2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
If the user requested the system xkbcommon with -system-xkbcommon, then
don't silently fall back to the bundled version if the functionality
test fails. Instead, print the an error notice.
Also note that the -xkbcommon argument didn't do anything, since it set
the variable to "yes".
Change-Id: I2c9e820bd076995aaaad987ecce76ebddcd79b4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We no longer support the maemo/meego platform, so we can remove the
specific code for that platform.
Change-Id: Ia7f0730eba2d96794b97b7ca4753f63a2d7bc2a8
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This code hasn't been tested for at least 4 years. It's not maintained
and probably doesn't work.
Change-Id: I4b9a5179e34111b400914f91caa6b741b69771bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Building QtDBus on Linux host for QNX target had two issues:
* Configure check failed, because dbus-1 library was not linked in,
if target platform doesn't support pkg-config.
* Host tools were not built, because pkg-config was not used to locate
dbus headers on the host.
Task-number: QTBUG-37324
Change-Id: I71d8309599fd40ef2dd8c9e3b44b93a7482019f1
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't actually detect whether the compiler can create Neon code or
provides Neon intrinsics. Most of them do, so that test would be mostly
moot. We removed the detection previously because we couldn't
automatically enable Neon due to leakage of instructions outside the
areas protected at runtime.
Instead, we rely on the mkspec properly passing the necessary flags that
enable Neon support.
This commit does not change that. All it does is verify whether the arch
detection found "neon" as part of the target CPU features. In other
words, it moves the test that was in simd.prf to configure.
It does fix the Neon detection in configure.exe, which was always
failing for trying to run a test that didn't exist
(config.tests/unix/neon).
Change-Id: Id561dfb2db7d3dca7b8c29afef63181693bdc0aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds the feature use_gold_linker to use the gold linker that
has been part of of GNU binutils since 2008. Gold links C++ libraries
much faster and use less memory.
The feature is autodetected when building Qt on Linux, but can be disabled
in configure. On MingW builds it is default off but can be enabled for
cross builds.
Change-Id: Icdd6ba2e706b2c791bcf44b6e718c2b7a5eb2218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Contrary to expectations, various <foo>-config tools sometimes spit out
denormalized paths, which breaks the text-based filtering, as it relies
on exact matches with normalized paths.
Change-Id: I0613ed24953a3bde19939d28d09572c88b43a361
Task-number: QTBUG-39216
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the windows version is already sane in this regard
Change-Id: Ib9c6fa35ede0e5e98b38b7b97086b9245c79d48f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
[ChangeLog][configure] The -process/-fully-process/-dont-process options
have been removed due to being unnecessary and counterproductive.
-fully-process has always been broken to a degree under unix (and since
5.0 under windows) - rcc isn't built before running qmake -r, so the
dependencies are unreliable (and there are many warning messages from
qmake).
also, it is a lot slower nowadays, as qmake -r is not parallelized.
-dont-process doesn't make any sense any more - even if you don't need
the Makefile for some obscure reason, the time spent on creating it is
not relevant without the recursion.
this leaves -process as the only option.
Task-number: QTBUG-36955
Change-Id: Ifd3949d9ff773780646c6f65db1629e1c19e53d2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If -qreal float is passed, fullCpuArchitecture() will now include
"-qreal_float". If something else other than "float" is passed to
-qreal, we'll try to encode it (e.g., -qreal "fixed<int, 7>").
Change-Id: Ie33fd1a643f4376e6f01a7966e01c7c34e6fcffd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
GCC 4.9 now allows us to #include any and all intrinsics headers, not
just the one for which we're compiling code, a behavior that ICC and
MSVC have had for some time. With that, we're able to have the functions
for different targets in the same source file. See the GCC manual:
http://gcc.gnu.org/onlinedocs/gcc/Function-Multiversioning.html
This functionality is notified by the QT_COMPILER_SUPPORTS_HERE(XXX)
macro, which indicates that all the intrinsics from
QT_COMPILER_SUPPORTS_xxx are available and enabled. To complement, a
QT_COMPILER_SUPPORTS(XXX) macro is also added.
Unlike ICC and MSVC, GCC requires a special function attribute, which
will also cause code optimization. That's the QT_FUNCTION_TARGET macro.
Note: because of the absence of the target attribute, ICC and MSVC will
not generate instructions with the VEX prefix unless they only exist
with the VEX prefix or if -mavx / -arch:AVX are enabled.
Change-Id: I0c1880c20324bd8e0fc68a863e36d1fa7755dff0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
This matches the -ffunction-sections from bootstrap.pro, which tells the
compiler to create a section for each function. The -gc-sections option
tells the linker to drop what wasn't used (normally, it only drops
entire files).
Before (on Linux, built with -O3, no LTO):
text data bss dec hex filename
1746385 7920 3750 1758055 1ad367 bin/moc
1444101 6664 1894 1452659 162a73 bin/rcc
4407725 1568 4896 4414189 435aed bin/qmake
After:
text data bss dec hex filename
1131655 6520 3494 1141669 116ba5 bin/moc
1027043 5480 1766 1034289 fc831 bin/rcc
3578489 1656 5313 3585458 36b5b2 bin/qmake
Gain: 35% on moc, 28% on rcc, 19% on qmake
Before (on OS X):
__TEXT __DATA __OBJC others dec hex
1495040 12288 0 4294993008 4296500336 100176470 bin/moc
1265664 8192 0 4294983904 4296257760 10013b0e0 bin/rcc
5279744 81920 0 4297912320 4303273984 1007ec000 bin/qmake
After:
__TEXT __DATA __OBJC others dec hex
806912 8192 0 4294988132 4295803236 1000cc164 bin/moc
720896 8192 0 4294979764 4295708852 1000b50b4 bin/rcc
4841472 77824 0 4295580688 4300499984 100546c10 bin/qmake
Gain: 46% on moc, 43% on rcc, 8% on qmake.
Change-Id: Icc7cdc9fd6f5db15537b4adabaac7e7a27e539d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This might lead to a smaller binary if we use --gc-sections too.
Change-Id: I7e17b956a85ecefc3e187054848393d2855152b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* add -help text for gtkstyle
* use capital GTK in warning message for consistency
Change-Id: Iff522cc49497dda406dd111594857930d82e4231
Reviewed-by: Martin Jansa <Martin.Jansa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ES builds configure will now check for OpenGL ES 3.0 and 3.1
availability. This allows qopengl.h to include the correct header
and, by defining QT_OPENGL_ES_3 and QT_OPENGL_ES_3_1, the OpenGL
wrappers can provide support for MapBuffer, VAOs, etc. on GLES 3.0+
too. Right now this is not possible since the only standard way to
use an ES function specific to a given version is to use the function
directly. The extension mechanism (eglGetProcAddress and friends), that
is often used in desktop GL, is not available for such functions.
[ChangeLog][QtGui] QtGui's OpenGL headers are now automatically including
the highest available header (gl31.h, gl3.h or gl2.h) in OpenGL ES builds.
Task-number: QTBUG-38168
Change-Id: Ib857c58fe1696a9546fdd1aa143a9237e80325a5
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Do not link against ICU on Windows, unless it is explicitly requested
('-icu' configure option). This removes the QtCore->ICU dependency
if ICU was detected in the configure environment.
So far ICU has been used in Qt Core for
- support of a larger set of codecs (805 instead of 135)
- more accurate QLocale functionality (QLocale::toUpper,
qLocale::toLower)
- string collation
However, for all functionality there are also backends using the
Windows API/Registry (QLocale, QCollator), or built-in
codecs that are part of QtCore. Since the ICU dependency is quite heavy
(3 libs with about 25 MB) it seems sensible to not require it by default.
QtWebkit is unaffected, since it has it's own ICU check.
[ChangeLog][Windows] Changed configure defaults so that Qt5Core does not
link against ICU libraries anymore. Pass '-icu' to enable it.
Task-number: QTBUG-38259
Change-Id: I3fd3e8ac0f091f532b04945718c0e4a3cc71a087
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It has been fully obsoleted by 4255ba40ab.
This reverts commit 99eecab83d.
Change-Id: Id7b8d3bba27ff43e38e4fe32a4f2950de9ced493
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
Allows disabling pulseaudio and alsa support at configure time
making builds more deterministic.
Change-Id: I4f1719cf831458b1d5ad3ebc01f6782b897d392c
Reviewed-by: Martin Jansa <Martin.Jansa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kalle Viironen <kalle.viironen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This removes the old objcopy.test script and adds a cross platform
qmake project for auto detection.
Change-Id: Icc7c40d72fb0ff751d214b7351e20652f7b15945
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For AAT shaping support, we need either the pre-QPA shaping trick
or the new HarfBuzz on Mac; prefer the latter.
Disable some test cases aimed to test the HB-old behavior; enable ones
that should guarantee shaping-unaware behavior.
[ChangeLog][OS X] Use CoreText text shaping engine for support of
complex scripts. If required, the shaping engine used in previous
versions can be preferred by configuring Qt with -no-harfbuzz.
Alternatively, the QT_HARFBUZZ environment variable could be set to "old".
Task-number: QTBUG-18980 (relates)
Task-number: QTBUG-38246
Change-Id: Iee6fe4f5bc047e77259182b8585385c5febd02b3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
the effect of this is negligible, as this list is only used for
dependency scanning.
Change-Id: Iae9fc73c8633cfc8217bc90014498d9635d53ad0
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QtPositioning is supported on iOS since Qt 5.3.
Task-number: QTBUG-37792
Change-Id: I74729f0c99c49858032b68dd0e7c9e628ae77b12
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is the latest version, released on Mar 27 2014. It includes:
https://bugs.freedesktop.org/show_bug.cgi?id=75798https://bugs.freedesktop.org/show_bug.cgi?id=75892
Required for fixing input when running Qt application on Mac OS X
with XQuartz and for fixing QTBUG-36281.
Change-Id: Idc4d3c99a4008a10b91ab51c8910b36909974703
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This adds evdev to the help, configure status output and will include
it in the qconfig.h.
Change-Id: Ibc07516ab07e7c53ec89b167d604f5cefa2d92b7
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This should've been removed in commit 24f1025663
Task-number: QTBUG-37832
Change-Id: I3404f17c904dbb462773f40371d09b0e58a0930d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Pass the -confirm-license option to external license checker which is
used in Qt commercial version.
Change-Id: I62326d1e6a8307dae64535ecf2ced762130b7e8f
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Enterprise only license key handling removed from configure.
This does not affect the functionality of the Open Source version nor
the enterprise version.
Change-Id: I01736eba3066c56b6e50e022fae8de6aa9bd884b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Users might have (old) libxcb installed on OS X, for instance as
a dependency for another package installed via MacPorts. It's still
very unlikely that any Mac user would want to use the XCB platform
plugin. Thus, disable the auto-detection to avoid a dubious XCB
configuration error on Mac.
Change-Id: I11d21aad255925883d6841444baa13a29f1a26b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
don't make it add -g flags all of its own, but instead rely on debug
info being already present.
Change-Id: Ifb6b33709689e979768963ae0b9f3dca4fc77eef
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
clearly, this was a poor man's implementation of -force-debug-info.
Change-Id: Ib5c7e390bd0e3a6912af8c4027074a114ed33f8a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
as the option needs to be explicitly requested, just error out when
objcopy is bad.
also, disabling it after performing the test successfully isn't a very
clever thing to do. hpux is dead anyway, so just remove that logic.
Change-Id: I923a3912fc29da646c492c27aa29091ffeb2e42d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This release comes with important bug fixes. Also we can now
remove the workaround code which was needed for libxkbcommon 0.2.0.
Task-number: QTBUG-31712
Task-number: QTBUG-33732
Task-number: QTBUG-34056
Change-Id: I57caf7f803b9a01a15541a5ad82e464de3b8abbb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Disable eglfs and similar plugins when opengl is not enabled.
(but egl is present)
GL-dependent parts of eglconvenience need to be skipped too.
Task-number: QTBUG-37457
Change-Id: I44d49495241551bc7b1f565aa0b5ace9f310628e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Remove definition QT_EDITION which was set in configure
since it is not used anywhere anymore.
Change-Id: I5c30ab47c6244fcb07707fd05e11decf2068f6d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Grepping in Qt source code for QT_NO_XCB didn't find any
references to this variable.
Change-Id: Iabe5679f8b066facede2ac3bfc8c14ec4c0473a2
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
First of all QT_NO_SHAPE was never set in configure script, which
means that !contains(DEFINES, QT_NO_SHAPE):LIBS += -lxcb-shape always
was true and we were linking to -lxcb-shape no matter what.
Secondly, we are providing shape.c in qtbase/src/3rdparty/xcb/libxcb, so
users always have an -qt-xcb option available to get this extension.
Change-Id: I7d14a0ac5ca6e36fb9c053225916cae41028b532
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Relevant part from libxkbcommon's configure.ac file:
xkb_base=`$PKG_CONFIG --variable=xkb_base xkeyboard-config`
if test "x$xkb_base" = x; then
xkb_base=$datadir/X11/xkb
fi
AC_ARG_WITH([xkb_config_root],
[AS_HELP_STRING([--with-xkb-config-root=<path>],
[Set default XKB config root (default: xkeyboard-config install path)])],
[XKBCONFIGROOT="$withval"],
[XKBCONFIGROOT="$xkb_base"])
AC_SUBST([XKBCONFIGROOT])
This patch implements an equivalent logic in Qt's configure script (with some
additions).
Change-Id: I25968f76021e120e2439d2756121bbe3c5e18c98
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt 4 used to have it called LICENSE.GPL3 since we used to have GPLv2 as
an option before Qt 4.5 (which is when we added the LGPL v2.1). Looks
like no one realized that the configure script looks for that file when
LICENSE.GPL was added to the modularized repositories...
Task-number: QTBUG-37175
Change-Id: Iffb35adf128c3e49a7a0c12dbccd5ebe9bccf3f2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
less platform-specific code. the qfeatures.h generation is already here.
Change-Id: Ied69fb431eed5816fbff63b33be431ee913c2bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
G does not come after I. That's actually my fault, in the original
commit. But some options have been added since then in the wrong place
and/or using wrong settings for the report_support function.
Change-Id: Ib3f7d58a41059e5e7f97fd0e223b9629664686ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Added configure test, whether lgmon (liquid graphics performance monitor)
is available. The test is supposed to be positive only for internal
BlackBerry NDKs currently.
Added calls to initialize lgmon and to indicate when an app is ready for
user input.
Change-Id: I5cbc29fb38a86585dcebd14d462436deaa1998aa
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
On platforms like the Raspberry Pi the EGL implementation is not
compatible with X. This means that while EGL and Open GL ES can be enabled,
and will work fine with platform plugins like eglfs, EGL (and thus GL) should
be automatically disabled in xcb, otherwise a compilation error will occur
since xcb assumes the native handle types are the corresponding Xlib types.
Task-number: QTBUG-36551
Change-Id: I2cc4c558abb4b25d422a2c01da9b75b865ace402
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Add the required printsupport plugins to the QTPLUGIN variable
as is done for the QPA plugin.
[ChangeLog][QtPrintSupport] Made the Qt buildsystem automatically include the
necessary plugins so that static applications can print.
Task-number: QTBUG-29663
Change-Id: I0e2e3b0f25dd5714bd187711c85893926b0c4e85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we dropped all platform-related shapers during the
QPA refactoring, thus making HarfBuzz the only shaper on all
platforms, we can not deal with AAT-capable fonts anymore.
HarBuzz-NG now supports it's own shaper backend infrastructure,
so the decision was to enable HB's CoreText shaper backend on Mac
and simply make HB-NG the default shaper there.
Task-number: QTBUG-36056
Change-Id: If22e24fd5cc00c25952934332a2f4123f38135a4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It's not shipped as part of the default installation, but the binary
in /usr/X11R6/bin/makedepend exists and will trigger a dialog that
asks you to install X11. This is not needed when we can use the
compiler to resolve the dependencies for us.
Change-Id: I67e35a63d0f7101b7673127228df4dcefd3c1fdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Instead of merely intercepting logging output from stdout/stderr from the
journal side of started processes, this has the advantage of meaning that the
origin process name will be correct.
fprintf won't work, because if a process starts children (like e.g. a
homescreen does), then their stdout/stderr are merged into their parent, and
journal has no way of differentiating the origin.
We are also able to store information about the context of logging, which might
be useful in post-mortem cases.
[ChangeLog][Platform Specific Changes][Linux] Systems with systemd may now pass
-journald to configure to send logging output to journald. Logging will still be
sent to stderr for interactive applications (run from a tty) or with
QT_NO_JOURNALD_LOG set to a non-empty value.
Change-Id: Ib260cec1ea87390bf44f267d217d795583407d00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Needed to run the XKB extension where we used to expect X11 to be
installed in /usr. In FreeBSD, for instance, X11 is installed in
/usr/local like all the other not out-of-the-box packages.
Same thing goes for the compose platform input context plugin.
Change-Id: Ib7ace3117eaacc6e150394450d1330cba654ba8a
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
The normalize function don't do well it's job.
Given a path like that, the regexp "/[^/]+/.." will match 3 times
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.2/../../../../include/c++/4.8.2
[ ][ ][ ]
The second match is wrong as it will remove /../..
Use sub instead of gsub which only remove one match at the time.
Change-Id: I0657bc603e521c9e53b9f50d2481dce184b64bad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fixes ARM build, as the NEON drawhelpers and image conversion functions
were ifdef'ed out.
Follow-up to 1b12c0608b.
Change-Id: I0b5e89c8f445741432db2dfe1f8d971b971c8605
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now the only way to enable Neon support is to change the mkspec.
[ChangeLog][Important Behavior Changes] Qt no longer checks for
support for the Neon FPU on ARM platforms at runtime. Code optimized
for Neon must be enabled unconditionally at compile time by ensuring
the compiler supports Neon. You may need to edit your mkspec for that.
Task-number: QTBUG-30440
Change-Id: I4df9b2bf3cd022f8ed70f02f16878cb2cb3fe6fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
... except where they actually contain variable expansions.
unescaped backslashes in double quoted strings aren't nice, and
apparently actually break with old solaris shells.
Task-number: QTBUG-14167
Change-Id: I703694b6ac7ab71d9293c049d77212e20dd5bcb0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Passing -no-xcb disables xcb and related configuration tests
completely so for example QT_NO_XRENDER is not defined. This results
in linker errors in glxconvenience with -no-xcb since the XRender
calls are compiled in without linking to the library.
The XRender, XInput and such tests are not strictly xcb related and
may be used from elsewhere, for example glxconvenience which has
nothing to do with xcb. Therefore these tests are moved in configure
so that they are run even when xcb is disabled.
Task-number: QTBUG-35644
Change-Id: I77871612ea5f6711ecafd8ca53aac6c516c19e2e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We already require iOS 5.0 for deployment.
Change-Id: Idc175892297aacc904888b7f213318e5df69f975
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Needed for using alternate stdlib implementation like libc++ with clang.
Change-Id: I1782f62f5e2ea95e6cff8a1ed646362c0a31645c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a left-over from the cleanup of MMX/3dNow!/SSE support, which we
no longer have in Qt.
Change-Id: I48388710a499bddb518ae3c2b8a4ad989482f58c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If SSE2 isn't supported, then SSE3 can't be either. Onwards and upwards
for SSSE3, SSE4.1, SSE4.2 and AVX. The test for AVX2 was already there.
Task-number: QTBUG-24773
Change-Id: I005258db52d8abcd407a99b8ebcc23cdea8e3d9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This got messed up in merge 4a8273a6fc
thanks to automatic conflict resolution.
Change-Id: Idbe1545c7d3ee0580bf2c1381dd3e8b2191dc3e8
Reviewed-by: Michael Brasser <michael.brasser@live.com>
d34cae51 introduced a new configuration parameter, xcb-xlib, but did not
remember to set the internal variable after the config test was run,
resulting in a potentially incorrect reporting of the option.
Change-Id: I979589d9aad2eb5e0fac069dfcd5b329a51ae059
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the change is wrong for multiple reasons:
- it is possible to build qt (the offscreen plugin) with xlib but
without xcb, which was impossible after the change
- the check was built in a way that if xcb is auto-detected but xlib is
missing, configure would abort (instead of disabling xcb), which is
unreasonable (cf. linked task)
- it should be possible to build the xcb plugin without xlib - it's
testing for xcb-xlib and should have the correct #ifdefs. if these are
broken, they should be fixed. if this is unrealistic, the build system
should be adjusted to this fact ... differently.
This reverts commit 683451e7c7.
Task-number: QTBUG-34382
Change-Id: I1c5811e2fb1f09b084b6aeb7350e5f376e1b9b82
Reviewed-by: Nicolás Alvarez <nicolas.alvarez@gmail.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Testing feature macros is not enough for uclibc. Fixes build of the built-in
sqlite3 with uclibc <= 0.9.33.2. Later versions will have posix_fallocate().
Change-Id: I918a52777ac63624635802221effc6b86fa2269c
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We require glx version 1.3 which is where fbconfig is first defined.
Also make use of the configure test and report the glx status.
GLX support should always take precedence when compiling the
xcb backend
Change-Id: Ie46834210bf5cd2ac4006ff08379e0d3434ffa2b
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This adds a new configuration parameter, xcb-xlib, which allows
overriding the configure test for that existing configuration option.
The use of xcb-xlib in the xcb platform plugin becomes the preferred path
for non-OpenGL ES 2 builds, while the EGL codepath is used otherwise.
This has the advantage that EGL can be used with Desktop OpenGL if Qt is
configured with -no-xcb-xlib.
Change-Id: I5018e31fe0399b94f020c671eff9414d00431c44
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
desktop opengl and egl are not incompatible with eachother, so there
is no need to disable egl when on desktop opengl
Task-number: QTBUG-34949
Change-Id: I757c38674a480910d1cb23853c255eb993e107ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
The QtGraphicalEffects module is a QtQuick2 only module so it is clear
why it was left out before iOS had support for QtQuick2, but now it
should be built by default. This commit removes QtGraphicalEffects from
the iOS module "skip list".
Change-Id: Ie0890f6784ad6e276e80bf7a11195c141ca23332
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The QtQuickControls is supported for 5.2 though it does not provide
the system native "look and feel". This patch removes the module from
the iOS module "skip list".
Task-number: QTBUG-35033
Change-Id: Icad479f2e4651c02e569e8a86cfe5ac912d8ed10
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QtMultimedia is supported in Qt 5.2 and should be built by default, so
it has been removed from the module "skip list"
Task-number: QTBUG-35039
Change-Id: Id43f997251bf392b7f6c0166ee06b7364ce30b8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
it's beyond me how it landed in the middle of the sql driver detection.
Change-Id: I7d1302e3440b8828a291e3009e9b130a2fdf165f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Plain QNX 6.5.0 does not have a libpps, the new QNX
has a libpps and BlackBerry has it as well. So we need
a configure check to not open another mkspec for this
platform. This fixes the plain QNX 6.5.0 build.
Change-Id: Id4b3876f2385bcb5f3df426945532e7e26133f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
introduce XPLATFORM_MAC which is properly initialized from the spec
instead of from the host.
use that and BUILD_ON_MAC where appropriate.
minor bug: during command line arg validation we use BUILD_ON_MAC even
when XPLATFORM_MAC would be in order, because the latter is not
available at that point yet. the solution would be delaying the
validation, but that doesn't seem worth the effort now.
Task-number: QTBUG-33896
Change-Id: I63f361212961bfdd82efde2ca71a1f48904a85fb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... which is right after performing the platform detection, as proper
license checking needs to know the target platform.
we can do that now, as we moved all more expensive or side effect laden
processing to a later point.
as a side effect, we also get rid of the weird early cmdline parsing.
Change-Id: I0fda0a15a1ea2082603f7097e89aa422853f30fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
is the only sane thing, and now that there are no dependencies on
anything else any more (in particular anything slow or side effect
laden), we can actually do it.
this removes some nasty OPT_HELP checks spread throughout the code, thus
further reducing data dependencies.
Change-Id: Ib0a00e1514e2aa25ec3b527ba9f5719e3214640b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the help would echo the defaults adjusted by command line overrides and
environment variables for some options. this was entirely pointless.
it also printed the result of the os detection, which was mostly
useless.
but the primary reason for doing this is reducing data dependencies,
so the code can be moved up.
not touching the windows configure, as it's a lot harder and currently
that behavior isn't in the way of what i need to do.
Change-Id: Ide62119091c8494fb3bea2b607f140268f057919
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's counterproductive to do it earlier: it's passed down to configure
tests, which then log less info than they could.
but primarily, this serves the purpose of minimizing the amount of code
executed before platform detection.
Change-Id: Iff19b8555de19d048ea6d9341af965871b314c54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
minimizing the amount of code executed before platform detection.
Change-Id: Ib2c0d97ce5040ced8c4c41d74f428fe7d0f75664
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's entirely pointless to flood the user with information and force him
to scroll back when he most likely just made a typo.
apart from that, this reduces the data dependencies, thus easing further
refactoring.
Change-Id: I7b24274d453de54a4f02481a66d77e27d4ab0657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moving dead code out of the way of further refactoring.
Change-Id: If558406cdf13d61478634dd7eff644dc67b0e53d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
have this option independent code out of the way before starting option
processing.
Change-Id: I5a08caeb25689b155c256ef82505c000112f5039
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This way, a Qt compiled with qreal=float and one linked
with qreal=double can not be linked by a single downstream. That is
diagnosed at cmake-time.
Change-Id: I9183dbcfef181fadea5321d3154948e8258e4a2a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On modern ARM CPUs there is no speed difference between
float and double anymore, so let's rather use double for
qreal to avoid rounding and precision issues. Like this
we also get much better compatibility with our desktop
OSes.
This is not binary compatible on ARM, but the old behavior
can be restored by passing -qreal float to configure.
Change-Id: I2a4b61e19a3dfa6b0bd76734cecf2634c97207fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this makes it possible to properly exclude entire subprojects based on the
availability of features, rather than stuffing every single source file
with #ifdefs.
the defines are aggregated from the -qconfig <profile>,
-no-feature-<foo> and some other configure flags.
usage:
load(qfeatures)
!contains(QT_DISABLED_FEATURES, textarea): SUBDIRS += textstuff
Task-number: QTBUG-28102
Change-Id: I83400632d64312fa4b907e1318dddfe27c432387
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
the path filtering functions assume that DEFAULT_{INC,LIB}DIRS are
newline separated lists of unquoted strings, which 8fbf959be broke.
Task-number: QTBUG-33714
Change-Id: Ie07909963ac5155a8ac79ca9254f34069925e001
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conceptually a Qt for iOS SDK or source build should support building
for both simulator and device, based on the same qmake binary and Qt
libraries. Qt Creator or Xcode should then be able to use the same Qt
version while still building for a single target at a time. This
applies to user libraries as well, which shouldn't require switching
to a different Qt when changing target platform from simulator to
device.
We achieve this by using Qt's exclusive_build feature, where we build
for the two targets in parallel, and then teach Xcode how to choose
the right library dynamically at build time.
Change-Id: I06d60e120d986085fb8686ced98f22f7047c4f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Avoid need to modify qnx.pro in src/plugins/platforms/qnx to
build with imf support. By default detects if necessary headers
and libraries are available. Can also be explicitly requested or
disabled with -imf and -no-imf options.
Change-Id: I3f9780fc189a33e4c93fb4f950111121f8e947c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Status for LIBUDEV printed again in the configure output under 'udev ....'
Change-Id: I3e0beca4c6de315dc2dfbdc24d83f4d9cd2b8856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Nothing in qtbase uses gstreamer, so this is just a red herring.
Change-Id: I93fb20a70928d84fed8f33ca4c5df38779928f1a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
apparently some awks need the regexp delimiters to be escaped even
within a character list.
Change-Id: I74a77022e134cafa269960c5c88a9a88589f1b95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
but this time without reshuffling it. it's actually easy with awk.
this makes the resulting qconfig.pri cleaner (and thus easier to debug).
and configure needs a few millisecs less to finish. ^^
QMAKE_DEFAULT_INCDIRS doesn't appear to contain dupes to start with.
Change-Id: I9eed2cf853cd15d0d24a885b1c3d69f22ffafb36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the consumers of these variables use the strings for naive text-based
"subtraction", which of course doesn't work particularly well when the
paths contain "../", "./", and trailing slashes.
Task-number: QTBUG-33714
Change-Id: I893c90e6f5c7cf18c9e6cb1e5be825a16509a2a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Don't discard stdout, it might contain important information. For
example, if qmake crashes, the segfault or similar notification comes
to stdout.
Change-Id: I53def75f37f134544922cf01b4f2ba7c903351cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
