Remove benchmark tests that are no longer required as they are simple
overloads of other methods.
Change-Id: I610211543d17c077f482fa2145ac3da7d0767282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add support to QDateTime for time zones using the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Add support for a new Qt::TimeZone
spec to be used with QTimeZone to define times in a specific
time zone.
Change-Id: I21bfa52a8ba8989b55bb74e025d1f2b2b623b2a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids dynamic construction of the private class. According to
the benchmark we go from 4,550 to 3,900 instruction reads per iteration.
(without change 32629676 the baseline is 5,600)
Change-Id: I5df925e30dbd49bdde87173e481820574ce5abe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current question is whether activeThreadCount() should be lock-free
(using atomic ints) or mutex-protected, so this tests start()
and activeThreadCount() directly.
Change-Id: Ica4a2ad023c2002e3c7d81558e6b9ee64af7f690
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QFSFileEnginePrivate::canonicalized has been gone for a very, very long time now
(since d3b152ba1e3cd38dd675c801474105d518bacb44 in Qt 4).
This also fixes a build failure in the code on Windows.
Change-Id: I81f5e0c1d644b1b4d75644626eb394a663535387
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Compilation failed because "open" is defined as "open64" in fcntl.h.
This definition is reverted now.
Change-Id: I9badcf11131320c53e442cd5b8b21bb5aa4efee5
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
When calling intersect() on a large (1000000 items) QSet, with a small
(1000 items) QSet as the argument, the function takes signifcantly
longer than when the operand and the argument are reversed. This is
because the operand set is always iterated over in its entirety.
This patch changes intersect() to iterate over the smaller set. This
reduces the large operand scenario's benchmark to ~0.000063
milliseconds, compared to the current ~134 milliseconds:
1000000.intersect(1000) = empty: 0.000063 (was 134)
1000.intersect(1000000) = empty: 0.000039 (was 0.000036)
1000000.intersect(1000) = 500: 0.10 vs (was 130)
1000.intersect(1000000) = 500: 0.023 vs (was 0.093)
1000000.intersect(1000) = 1000: 0.20 vs (was 139)
1000.intersect(1000000) = 1000: 0.017 vs (was 0.016)
Task-number: QTBUG-22026
Change-Id: I54b25c49c78c458fef355e9c6222da8a64c7681f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Void is not constructible, so there is no point in checking how fast
it can be constructed.
Change-Id: Icb4b607bebce30fff5fc57b105101f019e0e0db5
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It was only used for toUpper/toLower but always computed in the
constructor, including QString::toLatin1 conversion and allocations.
This needlessly slows down all other uses, including supposedly "cheap"
operations QString::toDouble, or accesses inside QResourceFileEngine.
The benchmarks indicates that doing it always when needed is bearable.
There's still a lot of improvement potential on these code paths.
Change-Id: I88b637ee11f9f7ea614f8da4ec5df0bf40664fce
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Use Q_OS_WINCE ifdef in both method declaration and definition,
in addition combine QT_NO_PROCESS and Q_OS_WINCE ifdefs to one line.
Change-Id: I0787e4341c41b46a5fc089f24a538c0ad40a0875
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In case somebody uses QVector as a stack, it is not fair to have
takeLast, removeLast and pop_back to do way too much work.
This is still very slow compared to std::vector::pop_back
(mostly due implicit sharing), however it is more than a
factor faster than before.
Change-Id: I636872675e80c8ca0c8ebc94b04f587a2dcd6d8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a fast insert on QMap when providing a correct hint.
Change-Id: I256bba342932c1d4f24c6e65074e1bf47b519537
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Iba4b7f8ff7a1c7974d144b955cbf064e43b36ec7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
CONFIG += pcre is enabled if we're using the Qt PCRE, which isn't
compiled for 8-bit. If it isn't set, then we have a system PCRE.
Change-Id: I29d043b9d3f4d3223dcbb41eadc9f859e710eb88
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
it compiles just fine without it.
if this was meant to inject a newer version of JSC than what is in
QtScript, it can be redone without creating a bizarre hybrid.
Change-Id: I61fe60bfa6a9bdb6423e8a7135250e332a5835ec
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
tst_QMimeDatabase::inheritsPerformance() is not an unit test but a
performance test, so moving it from 'tests/auto/corelib/mimetypes/qmimedatabase'
to 'tests/benchmarks/corelib/mimetypes/qmimedatabase'
Change-Id: I59e84f61559023659f101666683870f2ca1d2034
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
We can insert directly on the most left-most Node.
We always enforce an insert here (unlike the insert call),
but that is not a problem since the keys in a std::map are unique.
Change-Id: Ib409b90ffc57a5a43dab4a4b08d34f6fdabd057f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This suggestion keeps track of the most left node.
The point is that constBegin() becomes a lot faster.
That speeds up iteration a bit, and makes it O(1) to get the
first element. The penalty in insert and remove is very small.
On large trees it seems to be less than 1%.
It should be noticed that constBegin() is a very common hint
on my planned change to 5.1, and this opperation will without
this patch cost 2 x log N. One when the user calls the hint
with begin - and one where it is compared with begin.
Other std::maps has a very fast begin(). E.g
http://www.cplusplus.com/reference/stl/map/begin/
(begin with constant time)
Change-Id: I221f6755aa8bd16a5189771c5bc8ae56c8ee0fb4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Giving the std-map a hint (normally) improves insert performance.
There seems to be no reason not to provide this hint.
Change-Id: I4344607ebf54574a3ae9666d87a41a3c14762361
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Normalise all signal/slot signatures in tests/*/corelib,
except in tst_QObject, where they might be test data.
Change-Id: Id4e101f285b1676bb583b0afae06d235e599e24b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
tst_QProcess::echoTest_performance() is not an unit test but a
performance test, so moving it from 'tests/auto/corelib/io/qprocess'
to 'tests/benchmarks/corelib/io/qprocess'
Change-Id: I796788534eafc5ca3b8d86c0ec46998285fd4b8f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
It's closer to what we do with in QMutex than pthread_mutex_lock.
Change-Id: I86498a800b69b684bf096912e911bc5bca219727
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QDateTime will attempt to convert unknown types of date to UTC time, which isn't
exactly a fast process. As we don't care about local timezones in the process of
sorting (as this is purely for ordering, not display to the end user), we can
force the dates to use UTC time, avoiding the unnecessary local timezone lookup.
This also adds a benchmark covering this case.
Benchmark results, Qt 5:
- before: 11, 489ms
- after: 273ms
Qt 4.8:
- before: 20, 848ms
- after: 278ms
Change-Id: I87fa6260e820b5b172d3306ff395dafe767c33ff
Reported-by: Thomas Perl <m@thp.io>
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Ensure benchmarks which need QtWidgets are gracefully disabled when
that module is unavailable.
Fixed one unnecessary usage of "QT+=widgets".
Change-Id: I8031b5dca585749f0f4d22e0637adc3f57f4e418
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
qdatetime.h uses std::min/max and on Windows windows.h (or some subsequent
header file) may under certain circumstances define min/max as macros.
The easiest way to prevent the windows header files from doing that is to
define NOMINMAX in the place right before windows.h is included. The other
way is to define min and max to min/max themselves to prevent windows.h
from doing its evil thing.
If a user of Qt (WebKit in this case) chooses the approach of defining
min/max to themselves and then includes qdatetime.h, then a subsequent
inclusion of windows.h doesn't work because qdatetime.h undefines min/max.
We should not enforce the type of workaround needed, therefore this patch
removes the workaround from qdatetime.h and requires user code that
happens to include windows header files before qdatetime.h (seldom case)
to choose either workaround.
Change-Id: I7347eec7369491a065e894cff557004e069453d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
+ QChar::LastValidCodePoint enum value that supercede the UNICODE_LAST_CODEPOINT macro
replace uses of hardcoded values with the new API; remove leftovers
Change-Id: I1395c9840b85fcb6b08e241b131794a98773c952
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
0xfdef-0xfdd0 is definitely 31 and not 15 :)
also fix all copy-pastes of this code (greping for '0xfdd0' helps ;)
Change-Id: I8f3bd4fd9d85f9de066f0f5df378b9188c12bd48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QT_NO_STL is now no longer defined, so remove the conditionals and
select the STL side.
Change-Id: Ieedd248ae16e5a128b4ac287f850b3ebc8fb6181
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The use of any broken-down components of the query now needs
QUrlQuery.
The QUrl constructor and toString() are now rehabilitated and the
preferred forms. Use toEncoded() and fromEncoded() now only when we
need to store data in a QByteArray or the data comes from a QByteArray
anyway. Change to toString() or the constructor if the data was in a
QString.
Change-Id: I9d761a628bef9c70185a48e927a61779a1642342
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
