Currently, QThreadPool's generated threads inherit the priority from the
thread they are created and that cannot be changed. This merge request
adds a property to QThreadPool so that the priority of the threads can
be different.
The default behavior does not change.
[ChangeLog][QtCore][QThreadPool] QThreadPool can now be configured to
use a different thread priority when creating new threads than the one
it inherits from the thread it was created in. This will only apply to
the threads started after the property is changed.
Fixes: QTBUG-3481
Change-Id: Ic98d4312d055a3357771abb656516ebd0715918d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no need to write emit and notify at the same time, as not
emitting after notify does not make sense.
This naturally only applies to properties with a changed signal.
Change-Id: I99ff7863a509262ad9d4f7c9c5afbc66fd37001c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
For QObjectCompatProperty, which allows to do basically anything in its
setter, it is actually easier to manually specify when the change should
become visible. This is in line with manually writing emit calls in the
old property system, and allows the preservation of class invariants.
Change-Id: I585bd3f25d722ca3fd721ead85fe73dbee26c5f6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Takes advantage of Linux's and Android's support for abstract namespace
when binding sockets, which is independent of the filesystem (see man
entry for unix domain sockets).
To make QLocalServer and QLocalSocket use an abstract socket address,
one needs to set the socket options to QLocalServer::AbstractNamespaceOption.
Fixes: QTBUG-16090
Change-Id: Ia9f9c9cc1ac5c28f9d44b0a48d854a7cfbd39b11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is blacklisted in dev and 6.1, let it fail properly. We can
watch the history of the test and remove the blacklisting if/when it
passes consistently on supported macOS versions.
Pick-to: 6.1
Task-number: QTBUG-20984
Change-Id: I3211ecf565995578c83a092c637890c0e8bfd766
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Compilers are catching up, so some #if 0 codepaths can now be
conditionally enabled.
Change-Id: Ia9e87a096bc2ae4789ab390a9170d9c1eb9690d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This check doesn't really do anything useful anymore: QStringLiteral
is used in Qt without any extra QT_NO_UNICODE_LITERAL #if-ery
Additionally, clean the related (and outdated) comment in
{QString, QByteArray}::literals()
Change-Id: I65b1eac33c5470508997be24f9ba6cf56d8578ea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In case of a read-only text editing widget it was imposibble to copy text
from it. In QtWidgets you could not even see the selection handless.
Text selection in QtWidgets module was filtered depending on readOnly
property of the widget. Additionally, in InputMethod the read-only state
was translated into disabled.
Patch also makes the edit menu to be aware of the read-only status of
the control - the menu items are different for rw and ro controls.
Task-number: QTBUG-91417
Change-Id: Ic7b27f78678eeaa87a38607af787f254db1383b8
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
376e3bd8ec added the new class for Qt 6.1,
but during header review we concluded that using a class introduces
complexity wrt instance ownership and API design that can be avoided by
using a std::function instead.
The functionality is tied to QTextDocument, so the type definition and
the default provider API is added there.
Since std::function is not trivially copyable, the atomicity of the
previous implementation is not maintained, and concurrent modifications
of and access to the global default provider from multiple threads is
not allowed. The relevant use case can be supported by implementing a
resource provider that is thread safe.
Task-number: QTBUG-90211
Fixes: QTBUG-92208
Pick-to: 6.1
Change-Id: I39215c5e51c7bd27f1dd29e1d9d908aecf754fb7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We deliberately expose moc to warning-worthy C++, but we don't want the
compiler warnings coming from those.
Change-Id: I09c36d7c8bfbb88f7bde61fa7bcc52a5adde81da
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
While the class name is now a bit more than a mouthful, it's purpose
is very narrowly tied to QTextDocument, so don't use a very generic
name for it. That resources are provided based on a URL is to some
degree an implementation detail, and URLs are resource locators so
we don't need that in the class name.
Address code review comment for 6.1. Add documentation and links to
existing APIs with a similar purpose.
Task-number: QTBUG-90211
Task-number: QTBUG-92208
Pick-to: 6.1
Change-Id: I4f09057cc2f53a5595513c1c9422e6ccaad6ca13
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Q_CC_GNU is defined on compilers that masquerade as GCC (Clang, ICC),
so using it to work around GCC-specific bugs is wrong. Introduce a
local define for _only_ GCC and use it in place of Q_CC_GNU.
Drive by: version-fence a test we now know it's been fixed upstream,
and correct the link to the corresponding bug report.
Pick-to: 5.15 6.0 6.1
Change-Id: I9059d6e6bf86157aca71590ac22afb1a1c114313
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
fillRule() contained a major blunder: instead of checking if the
d-pointer was allocated, and return a default value if it wasn't,
it checked whether the path contained any points. This means that
QPainterPath p;
p.setFillRule(x);
Q_ASSERT(p.fillRule() == x);
was failing.
As a drive-by to test this change, fix another mistake in clear():
clear is documented to clear the elements in a path, but instead
it also changed the fill rule.
This commit partially reverses 697910e5fb.
Change-Id: Ieb8145694b672439c3380d9ccb87d1206a2dd115
Pick-to: 5.12 5.15 6.0 6.1
Done-with: Milian Wolff
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This function returns the metatype corresponding to the metaobject, or
an invalid metatype for namespaces.
This works as follows: First we increment the metaobject revision for
new metaobjects. Metaobjects with older revisions are handled by doing a
lookup by name. That fallback is also used for dynamic metaobjects (from
QtDBUS and those created by QMetaObjectBuilder).
For new metaobjects, we store the metatype in its metatype array, behind
the property metatypes. This avoids any changes to the property and
method metatype extraction logic: For properties, the metatype access
does not change, as the new metatype is after their metatypes. For
method metatypes, we already have an indirection layer (using offsets),
so by adjusting those offsets by one, the same logic keeps working.
To distinguish between namespaces and dynamic metaobjects, namespaces
store the metatypeinterface pointer for void in the metatype array,
whereas dynamic metaobjects store a nullptr.
One nice additional benefit is that this simplifies the generator logic
in moc, as the metatype array is now never empty.
Task-number: QTBUG-92077
Change-Id: Id3f920f28553f12032a71a1a87dad29e5374dbe7
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
We are still using Catch2 2.11.3 which is not adapted to Apple
silicon yet. This patch backports the required change
from Catch v3.0.0-preview.3.
Change-Id: Ifa14a1fdd6cd1f661c94a0a78648cb01bd9699c1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fix operator checks for containers whose value_type equals themselves.
It does not make sense to recurse on value_type in that case. Thanks to
std::disjunction having short-circuiting semantics, we can avoid that
issue by checking first whether T is T::value_type.
As a drive-by, check for value_type typedef before checking for
begin/end in is_container. This works around an issue in gcc <= 8.1,
which fails to correctly SFINAE the case where begin and end are private
methods.
Pick-to: 6.0 6.1
Fixes: QTBUG-89456
Change-Id: I27305a7cfe050f13a279c07f00bc229c01daa25b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
It was treated differently depending on format, made it consistently
behave the same for all formats (following the behavior of the primary
formats).
Pick-to: 6.1 6.0 5.15
Change-Id: Ie24e19957d076fdf3ebd333074e26ede187489eb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QGridLayout::takeAt() and QLayoutItem *itemAt() only check the upper bound.
If the index < 0, these function will return invalid pointer.
Fixes: QTBUG-91261
Pick-to: 5.15 6.0 6.1
Change-Id: Idfb9fb6228b9707f817353b04974da16205a835c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QSqlQuery is a broken value class. Copying one object would mean
copying database state (the result set, the cursor position, etc.)
which isn't generally available for all database drivers.
For that reason, the current implementation does not honor value
semantics -- modifying a QSqlQuery object has visible side effects
on its existing copies (!).
The correct solution is to accept that QSqlQuery is a move only
type, not a value type. Add move semantics to it, and deprecate
its copies.
(We can't just *remove* copies in Qt 6 due to SC/BC constraints).
[ChangeLog][QtSql][QSqlQuery] QSqlQuery copy operations have
been deprecated. QSqlQuery copy semantics cannot be implemented
correctly, as it's not generally possible to copy a result set
of a query when copying the corresponding QSqlQuery object. This
resulted in modifications on a QSqlQuery having visible (and
unintended) side effects on its copies. Instead, treat QSqlQuery
as a move-only type.
Fixes: QTBUG-91766
Change-Id: Iabd3aa605332a5c15c524303418bf17a21ed520b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This can only be completed in Qt 7, due to BC guarantees. I've only
updated the source code for QHostAddress and its unit test and even then
I did not touch the documentation. This needs to be completed in Qt 7.0
Change-Id: I26b8286f61534f88b649fffd166b695882f8f3b5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The calculation rounds early and often, which is intentional. Add
unit test to make sure we don't regress.
Fixes static analzyer report about incorrect rounding in
c903a34347776fe3b89785faa35c446d.
Address some outdated comments and documentation. The property
is read only and calculated, so don't imply that it can be changed
from its default value.
Change-Id: If2dbd9890e533dfccda3eae4cbc96db4f1246f4d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Test we get the same starts of various days. Some coming changes shall
break some of these, but they should all be back to working by the
time we're taking account of DST before 1970 as well as after.
The first two or three test-cases work by accident in most zones, at
present, due to the zone-based code-path ignoring the LMT period
before the zone's first transition; but Europe/Helsinki had a renaming
transition in 1878, so does see its pre-zone offset between then and
the switch to UTC+2 in 1921, leading to failures in exactly the zone
Coin tests. So suppress these three test-cases pending later fixes.
On Windows, the next text (still pre-epoch) gets bogus zone data for
its LocalTime, so suppress that likewise.
Task-number: QTBUG-80421
Change-Id: I2264e0e436d92112b03264faa410e30057b8f73b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
qtbug_xxxxx is a fairly ambiguous test name
Change-Id: I4b407160464c9b8300d3683549b0ede837161e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These two tests (applicationTest() and mainWindowTest())
require QApplication::setActiveWindow() to work, which it
does not on Wayland.
Task-number: QTBUG-91418
Change-Id: I0e7b4e24050684b437de63d19bd885bab53d36b9
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
MSVC generates the following for those tests:
warning C4996: '_open': This function or variable may be unsafe. Consider using _sopen_s
instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online
help for details.
We need to set the define before any C runtime headers are included, so
do it right away, it doesn't do any harm on other compilers.
Change-Id: Ia25afb87934058c3f27e63820eeb2db063a627f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
