Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Introduce QCharAttributes and use it instead of HB_CharAttributes everywhere in Qt
(in Harfbuzz, the HB_CharAttributes is only used in the text segmentation algorithm
which has been moved from HB to Qt (well, most of it)).
Rename some members to better reflect their meaning,
remember to keep HB_CharAttributes in sync with QCharAttributes.
Also replace HB_ScriptItem with a (temporary) QUnicodeTools::ScriptItem struct
that will be replaced with a more efficient/friendly solution a bit later.
The soft hyphen and the mandatory break detection has been factored out
of the default text breaking algorithm to a higher level in order to refactor
the QCharAttributes bitfields and to optimize the implementation for the common case.
Change-Id: Ieb365623ae954430f1c8b2dfcd65c82973143eec
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This test is crashing. Specify the bug report number in the QSKIP
message.
Task-number: QTBUG-22343
Task-number: QTBUG-27285
Change-Id: I4d4ead4f54944a545103a3d01c5c9d302d7fb1df
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Garbage libs (under elftest) are numbered from 1 to 5 and not from 0 to 4.
Change-Id: Ia0162372bf5cd1fb53a0442543c5a65716880611
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
A modal window in front in the modal window list should never be blocked
by a modal window further back in the list. This was taken care of in
QGuiApplicationPrivate::isWindowBlocked(), we just need to make sure it
gets called when a new modal window gets shown so that its blocked
status is up to date.
Task-number: QTBUG-27206
Change-Id: I590f1715e66067edb178081352636f34fe54a885
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
The style hint SH_ScrollView_FrameOnlyAroundContents was currently
being ignored by QAbstractScrollArea. This looks like an accidental
regression following 10c6f015f4.
This code path does not execute on mac so it should have no impact
on that patch.
Change-Id: I78ca0a6b87dfdd7d426acbb3ef49480390211af2
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
A horizontal line should round up at the same time as a vertical line
with square cap, when rendering at subpixel coordinates. Thus, the
special casing in the cosmetic stroker of offsetting by half a pixel
should be for flat caps instead of for square caps.
Task-number: QTBUG-26013
Change-Id: Ic09249337f814c7de95a17976ec9e651561a744b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The QShortcutEvent constructor takes "int shortcutId" as its second
argument, not a bool. Since the default shortcutId is 0, this test
passed, since false == 0.
Change-Id: I43bbae4613f3badb1578dccec76dcdd3c96a3a2f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QWidget's mapToGlobal() and mapFromGlobal() functions assumed that
if the widget reports it's a window or if it has no parent widget, it
must be a top level window whose coordinates are in global coordinates.
This is not true for child QWindows or embedded native windows
(QAxWidgets).
Changed the logic for mapping coordinates to use equivalent methods
from QWindow if widget has a window handle, and changed QWindow's
methods to map coordinates using native methods if window is embedded.
Also fixed newly failing accessibility autotest. The geometry related
failures there popped up because now the position of the rect returned
by accessible interface is actually correct while widget geometry still
reports position 0,0 before widget has shown up.
Task-number: QTBUG-26436
Change-Id: I658fafd0ce01eb1604ba255efeeba3073ca0189f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Disable SSL compression by default since this appears to be the a likely
cause of the currently hyped CRIME attack.
Change-Id: I515fcc46f5199acf938e9e880a4345f2d405b2a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
"HTTP/1.1 100 CONTINUE\r\n"
If the header from a server is splitted between two packets
the first packet contains "HTTP/1.1 100" and the second one
contains " CONTINUE\r\n", one space (0x20) is skipped. After
processing the line looks in this way "HTTP/1.1 100CONTINUE".
QHttpNetworkReplyPrivate::readStatus(QAbstractSocket *socket)
is called twice, if a http header is splitted as above.
The function always removes whitespace from the beginning of a packet,
even if it is the second part of a http header.
QHttpNetworkReply returns QNetworkReply::RemoteHostClosedError
due to damaged http header during processing.
Improvement of unit test.
Task-number: QTBUG-27161
Change-Id: Ifc2949f62473209b4032185effbf5078b4130cda
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has one stable failure on Mac OS X, so mark this
with QEXPECT_FAIL and remove the QSKIP
Task-number: QTBUG-22320
Task-number: QTBUG-27230
Change-Id: I7660df5770c39788792068a5b68e8236551288c4
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
The Blackberry OS uses a filesystem with the noatime option,
which returns a "wrong" access time.
Change-Id: I04cdb899699e819a36e0917e30d750067b33388d
Reviewed-by: Tobias Koenig
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Changing it outside of the test function definition to avoid running
empty/inapplicable test functions.
Change-Id: I713560cde7f715696984ed082d682900f5f1bcdd
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
Create a new QDBusConnectionPrivate for every new connection in
qDBusNewConnection instead of creating a single QDBusConnectionPrivate
in the QDBusServer constructor which gets assigned the latest connected
DBusConnection in qDBusNewConnection (and loses track on all previous
DBusConnections).
Also extend tst_QDBusConnection::registerObjectPeer() test with multiple
connections to the server.
Task-Number: 24921
Change-Id: I4341e8d48d464f3fe0a314a6ab14f848545d65a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QElaspedTimer is a lot more efficient.
Change-Id: I66d9514108f800a45181d8960b01a5e7d3fa9e80
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test tries to acquire a semaphore that isn't ready, so it will
timeout. The test is working properly.
The only problem is that 10 ms is too strict. For a wide variety of
reasons, especially since the Qt CI system runs multiple tests in
parallel, the program may not run again in that 10 ms window.
Change-Id: Ic0f684895f73646db5f1cc783fe9ef75fb1ab02b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Fixed so that empty QDateTime is returned for non existing file.
Fixed also created() and lastRead() to return empty QDateTime for
non existing file.
QFileSystemEngine::fillMetaData() returned true for non existing
files. This was also corrected.
Task-number: QTBUG-25811
Change-Id: I523eb99e4405b4b813b2950f85cc646239181d07
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Christian Stromme <christian.stromme@nokia.com>
Redoing 5704cbc462
This can't work, because the define comes from qconfig.h, not qmake.
Skipping initTestCase and cleanupTestCase when QT_NO_PRINTER is
defined.
Change-Id: I2527c018294b7518a4692f2c93da933848640b5d
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
This test checks the access permissions for '/etc/passwd', however the
filesystem on Blackberry is always read-only
Change-Id: I9299531397d4467287541b04184540ad6e2eae72
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Introduced by 2e0003eda4. We were
missing a attributesEmitted=true which caused the output from
toHtml() to sometimes be invalid when using pixel sizes to
specify the font size.
Task-number: QTBUG-25778
Change-Id: Ied61fcaef425a590d71c0b52292ac676cb88ba52
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Exclude printsupport tests from the build when QT_NO_PRINTER is
defined.
Change-Id: Iedae91666a599f4b77250abc8aac14c256fde34e
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run. We ignore the
line for this entry when comparing the two results.
Task-number: QTBUG-27171
Change-Id: I8978678295217edd537edb0d2c25260813aa3d93
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
QArrayData can point to data it does not own (cf. fromRawData()), which
shouldn't be modified. Not even upon destruction, as this data can live
in Read-Only memory or be otherwise shared outside the QArrayData realm.
Change-Id: I8bdf3050a17802fb003b77d5f543fe31769a7710
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Bring back code from 4.8 (Note that ALT-TAB is not received
as key event).
Task-number: QTBUG-27146
Change-Id: I6dd2e9c88fdc4c89d26dfaa8ab47deb2be451f25
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The simplePen property was not reset when reusing the QPrinter,
thus we would output two identical setPen() commands in the PDF
making the autotest that compares the results fail.
Task-number: QTBUG-27171
Change-Id: I601042ec59e45ef72a56f230f6112a91a259b4a5
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
this is a monster commit which does the following things:
- import the evaluator as-is from qt creator into qmake/library/
- integrate it into qmake's makefiles
- overwrite proitems.h with actual special types
- remove the parts of Option which are redundant with QMakeGlobals
- make QMakeProperty a singleton owned by Option::globals. the dynamic
handling so far made no sense.
- make QMakeProject a subclass of QMakeEvaluator, with relatively few
extensions
the changes to existing qmake code outside project.* and option.* are
minor. implementing the changes gradually would mean changing a lot of
code which will be just replaced in the next commit, so i'm not wasting
my time on it.
Change-Id: I9746650423b8c5b3fbd8c3979a73228982a46195
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This test actually passes on Windows, so removing the QSKIP
Task-number: QTBUG-24543
Change-Id: Ic2666665f2882392aec92a665f51d6c5dd3355f8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This issue originates from https://bugs.webkit.org/show_bug.cgi?id=95736
Suppose we have
main.cpp
somedirectory/someheader.h -- which has #include "anotherheader.h"
anotherheader.h
With unix generator, the directory where main.cpp is located is included,
unless no_include_pwd is set. Hence the look-up of anotherheader.h from
within someheader.h will work.
With MSVC this works because MSVC looks "in the directories of any
previously opened include files in the reverse order in which they were
opened." (from http://msdn.microsoft.com/en-us/library/36k2cdd4.aspx)
Unfortunately the build breaks with MinGW, because it lacks support for
including the source directory in the include search path just like the
unix generator does.
This patch adds the same functionality to the MinGW generator as well as
an auto-test.
Change-Id: Iea8bb06e34862c51b8fd4eca2ee26668e24a319a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Remove some subprojects that have missing dependencies or use API that is
non-available on Windows CE.
Change-Id: Iad7118b95a691a433c3f798d56a6a069e5e41917
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Replaced with qt-project.org test domain.
The connectToMultiIP auto test is still disabled due to lack of test infrastructure.
Task-number: QTBUG-23294
Change-Id: Icf01aabb0ae503291abdda4e8f773f8e0a08931a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I807b0e88ac71a0cb367fb4170cca8f2cb0ad43f3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Also fixing some includes and re-enabling the test
Change-Id: I4a061e106c2e55db39b8000729737a93e3d7714a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I5b75877ba192fa1357e67fee70dff7c0475991e8
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ia30048e0c40967dc86a4e4ad26ac02ab67519096
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
According to Qt doc, "Network proxy is not used if the address used in
connectToHost(), bind() or listen() is equivalent to
QHostAddress::LocalHost or QHostAddress::LocalHostIPv6. This is not the
case in current implementation.
Change-Id: I6b8a40c1e8bd8aad9504d8f939b87eda6e93337c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test is now passing. Tested with intel compiler and vs2008.
Task-number: QTBUG-22285
Change-Id: I728919833d9bcbf71bef68c06baef92667ff074b
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test shows spurious failures in editingFinished() on some Mac
platforms (QTest::qWaitForWindowActive(testFocusWidget)).
This is apparently caused by the widget testFocusWidget (member
variable) interfering with the other tests widgets.
As it is used in one test only, instantiate it on the stack there.
Change-Id: I688cd21a2668d072660658302cf59197abe0b4d8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This reverts commit 6b5bbc531b.
Autograbbing mouse shouldn't be done in crossplatform code, as
X11 does this automatically. Windows needs platform specific
solution.
Task-number: QTBUG-26962
Task-number: QTBUG-27039
Task-number: QTBUG-23699
Change-Id: I911df92c4a34deb50b729f50681497046657948b
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When 2 (February) is entered as the month for (e.g.) 31/Jan/2000 (which
is following the format: "dd/MMM/yyyy"), the day is corrected to 29 but
displayed as its numerical value instead of its short (or long) name.
Task-number: QTBUG-27036 QTBUG-19091
Change-Id: I558ee13b224707d22b26c2ec2c045f96118bd5a1
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: aavit <qt_aavit@ovi.com>
