If an app wants use a debug framework of Qt, it is still expected that
the app should link against the release version, and just set
DYLD_IMAGE_SUFFIX=_debug when running the app.
This was not the case before, where the CMake Config files told CMake
to link explicitly against the debug libraries. This caused crashes
due to the Qt plugin loader mechanism still trying to find a release
platform plugin, which in turn would load release libraries, and thus
the application would end up loading both debug and release plugins.
Make sure the Config files in a framework case always reference the
release libraries (even though this might be counter intuitive).
Otherwise users of the Debug Config files would always get
crashes.
Fixes: QTBUG-78131
Change-Id: I88b1dc421477ad186012ca67b328a891128eb568
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Qt was configured with -libdir different from "lib", one could not
build with CMake whenever a static lib was pulled in (e.g. uitools).
Do not hard-code "/lib" but use the correct variable also for static
libraries.
Fixes: QTBUG-76255
Change-Id: I28c6861752e29e461247628d2b1f8a9ec32f0790
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Using WASM_OBJECT_FILES does not allow memory growth, so we need to just
explicitly check for QMAKE_WASM_TOTAL_MEMORY
Change-Id: I447113972dfc3df4ee4073e8cc25481646d1507b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The paths to the libraries and prl files should have the "_debug"
suffix for the debug configuration. This prefix is added to the TARGET
when by qt_module.prf when doing a debug build, but not during a
debug_and_release build.
Make sure to strip the _debug suffix if it's there, and re-add it later
always, to be consistent in both debug_and_release builds and in
debug builds.
Amends a12b6e7bf6.
Task-number: QTBUG-38913
Task-number: QTBUG-75520
Task-number: QTBUG-77092
Change-Id: I29e88f2b991e2be06b23652d64edc768fa35a5ae
(cherry picked from qt/78d67d17a6c108a419816b8bd47f78864ddbb07f)
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
clang-cl will never support C++ standards newer than
C++14 without these flags.
I didn't add them to msvc-based-version.conf because
on Windows, only clang-cl use the same flags with MSVC,
both ICC and MinGW have their own flags. So they are
clang-cl specific flags.
Change-Id: Ia44a5ea4237c77ea5e897fffded32cbc008a4729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This enables building against the latest SDK, while still opting out
of features that this SDK normally enables, by lowering the SDK version
set in the BUILD_VERSION/VERSION_MIN_MACOSX load command.
Change-Id: Id5f13524740bfbf5eda10a5d0c2e3fda04bf3f52
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After commit 9c7ebd191b, qmake would
complain about missing cmake tests even for internal modules that have
no application side C++ linkage that needs testing.
Change-Id: I23b23c81dbe6be2b6da5672cbd7b8f8454ec2f66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Beta version of Xcode 11 changes the format of the json object
returned by simctl and used to detect running simulators.
While multiple versions of Xcode can coexist on the same system,
they share the same simulator infrastructure so installing
Xcode 11 Beta affects projects using previous versions.
Change-Id: Icf06a794aa5ba3624163ace2ce827c0ecf97c38c
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
In a CMake regex, you need two backslashes to escape a character. The
.in file therefore needs four backslashes ...
This amends ba4fdd99ff
Fixes: QTBUG-76698
Change-Id: Ic757354ba596bf020c3ee5e90ee6d2d0fe3ba352
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change will create Config.cmake files for internal modules like
AccessibilitySupport when doing static builds. They need to be
find_package()'ed and linked in when linking in certain qt plugins.
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: Ia2e446025c87df48f20bb65cfd9da6c6a4354bb1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When adding the static dependencies for a module, they should be
added to the debug|release configuration as appropriate, otherwise
it ends up adding the debug version of the libraries to the release
configuration as well as the release version of the libraries.
Implementation wise, that means we have to use generator expressions
of the form $<$<CONFIG:Configuration>:${dependencies}>, because
INTERFACE_LINK_LIBRARIES does not have a
INTERFACE_LINK_LIBRARIES_<CONFIG> equivalent that can be set per
configuration.
Note that the condition part of the generator expression can not
explicitly check for Debug or for Release, because a user can
configure their application without specifying CMAKE_BUILD_TYPE,
which means that both Debug and Relase conditions would fail.
So the actual condition has to be isDebug or isNotDebug.
The same approach is used for INTERFACE_LINK_OPTIONS.
For debug_and_release builds we use the isDebug and isNotDebug
conditions for the generator expressions.
For singular builds (only release or only debug), we set the
generator expression condition to "1" aka always true.
This means that the Qt libraries and link options will always be used
regardless of the configuration with which the CMake application
is configured with.
Fixes: QTBUG-76337
Task-number: QTBUG-38913
Change-Id: I5369d8ba083359a4a92253dbd1dabe9d1efa34db
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The absolute paths of certain static dependencies can have spaces in
them. The _qt5_$${CMAKE_MODULE_NAME}_process_prl_file fails to handle
this, and simply replaces all spaces with semicolons, which obviously
breaks the list of dependencies, and a consuming application fails to
link with a message like:
LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj'
This change partially restores the functionality that was added in
102e1822ff specifically the part
that changes qmake to export an additional variable
QMAKE_PRL_LIBS_FOR_CMAKE. This variable has the same content as
QMAKE_PRL_LIBS except it uses a semicolon as a separator, so that
CMake can correctly parse the separate lib entries.
This is much cleaner than trying to parse the original QMAKE_PRL_LIBS
variable with a complicated regular expression.
Amends eda28621f6.
Task-number: QTBUG-38913
Change-Id: I1d18fb779606505bc92320d8ce13232c7022e212
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The paths to the libraries and prl files should have the "_debug"
suffix for the debug configuration. This prefix is added to the TARGET
when by qt_module.prf when doing a debug build, but not during a
debug_and_release build.
Make sure to strip the _debug suffix if it's there, and re-add it later
always, to be consistent in both debug_and_release builds and in
debug builds.
Amends a12b6e7bf6.
Task-number: QTBUG-38913
Task-number: QTBUG-75520
Change-Id: I29e88f2b991e2be06b23652d64edc768fa35a5ae
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The header clean command must not be prefixed by "@echo ...", because it
now starts with "$(CXX)" which already is prefixed.
This amends commit 6fa5dfdd.
Change-Id: I5c2e0d2c2ed91c7232fce0a4a49db0fccfdc005d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Like in Qt code itself we should use forward slashes consistently.
This enables the vulkan test to run on Linux for MinGW
cross-compilation.
Task-number: QTBUG-76660
Change-Id: Ifc6dec11bac3c3769d5d06e49da529f66f7b5843
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The make executable that comes with Android's NDK tries to execute the
shell-builtin "move" as a stand-alone executable unless you trick it
to execute "move" through the shell by surrounding one argument with
double quotes or such.
Force the execution of "move" through shell by altering QMAKE_MOVE for
Android on Windows.
Change-Id: I5b1490ad0606960dbd06a4cafb0b0b983e265159
Fixes: QTBUG-35713
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The directory must be prepended by = to denote the sysroot.
This amends commit 797f686e.
Change-Id: Ib85c0abc58fce3504ecccef0e223b2618ac9149a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We must use the same two-level replacements like for .prl files.
This amends commit d5071a40.
Change-Id: Iea065d01dee61cf2d1ff78640d045c3c76db9ac8
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Static libraries may get installed and used by other builds, which may
be done with a different version or build of the compiler. So this
commit introduces two new flags:
- no-static-ltcg: disables LTCG completely for static libraries
- fat-static-lto: forces static libraries to produce fat LTO objects
fat-static-lto is useful for Linux distributions, since installed static
libraries should not carry LTO information, but that information is
useful during Qt's own build. This feature should be used alongside some
compiler-specific method of removing the LTO information from the
static libraries prior to installation, so only the regular part
remains.
For current GCC versions, this command suffices:
strip -R '.gnu.lto*' -R '.gnu.debuglto*' libname.a
Otherwise, distributions can use "no-static-ltcg" to disable it
completely.
Change-Id: I495bc19409f348069f5bfffd155237ade9f4b42f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Normal sources are built using $(CXX), which is defined in the makefile,
but can be overridden. We should do the same lazy evaluation of the
compiler for headers.
Change-Id: Ic548786bd18ed8fb7eb0b58a527615ab19000323
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
If the QMAKE_CXXFLAGS already had -ffat-lto-objects, the *= wouldn't add
it it again, after our "-flto -fno-fat-lto-objects", which meant the
last one would stand.
Change-Id: Ic9cfa6256b5045caa6e6fffd15a7f6cda7aaa837
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Done to fix broken CMake WebAssembly support, where CMAKE_CXX_STANDARD_LIBRARIES
appear to be empty. The regression was introduced by
ba4fdd99ff.
This fixes the following CMake error on find_package(Qt ...):
string sub-command REGEX, mode REPLACE needs at least 6 arguments total to command.
Fixes: QTBUG-73475
Fixes: QTBUG-76244
Change-Id: Ieebe8cd1d49bb302dc37d8f118cc0b9376d6cdd7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The regular expression with the alternative is not portable.
Use a separate QMAKE_PRL_INSTALL_REPLACE item.
This amends commit f00de33.
Fixes: QTBUG-75950
Change-Id: I78e172053f8b05be7d595a1c9e1695ea658b0547
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
In the case of building a Qt module repository against an installed
qtbase the .prl files contain absolute paths to Qt dependencies e.g.
'/install-prefix/lib/libQt5Core.so'.
Those must be replaced with $$[QT_INSTALL_PREFIX]. The .prl
replacement code however only takes $$MODULE_BASE_OUTDIR/lib into
account.
Fixes: QTBUG-75804
Change-Id: I5ea5623ca7396b672fded3f1b9434b9ad5ed12ec
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
If qmake is called without sh.exe in PATH, the relative paths
in OBJECTS will contain backslashes as separator.
Anyhow, emar needs forward slashes. Use GNU make's subst command
to fix this.
This amends 22c1e10e19.
Task-number: QTBUG-75257
Change-Id: Iacc6fe69cf470f35c6ddd829be7a80944346452d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
x86_64 libs are located in ANDROID_PLATFORM_ROOT_PATH/usr/lib64
not in ANDROID_PLATFORM_ROOT_PATH/usr/lib .
Fixes: QTBUG-47672
Change-Id: Ia1f74f7c2a30b276b95fd0e7dcf8370d739e3c41
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
(cherry picked from commit 43763e2796)
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Mips archs were removed from Android NDK long time ago.
Change-Id: Icf64a1e2cfbe3fe7307c7898b14fd199d9eeaad3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
