using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
the cherry-pick is needed to support QtWebEngine 5.12 with Qt 5.11,
a requirement that was raised too late.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 95b0e4c956)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some distributions do not define MINGW_HAS_SECURE_API globally,
resulting in methods like wgetenv_s not being declared in the
headers.
This is probably to keep compatibility with Windows XP. Anyhow,
we don't support Windows XP anymore, so we can safely add the
define.
Note that this is not necessary for the mingw-builds distro,
which is the only one we test and support. Anyhow, I don't
see any risk in adding these for other distributions.
Diff was provided by Philippe Dunski in the bug report.
Task-number: QTBUG-67443
Change-Id: I3a64b11541fe95e527ed44bbf8ad94469d457d3d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
configure already does it for qt itself, so it's pointless to ever invoke
in default_pre.prf.
to make the exclusion work during the makespec reload during early setup,
we pull ahead the restoration of CONFIG, hoping it won't cause too many
side effects.
another change in qt5 will ensure that top-level builds are also covered.
finally, configure tests also need an explicit exclusion.
that way, attempts to re-configure build trees of commercial builds
after the day of the first configuration do not fail anymore.
Task-number: QTBUG-63452
Change-Id: I42264f64d7621784d4d67bde885a8e501f5ca413
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
If QMAKE_BUNDLE is set then this should be used for the bundle
identifier value instead of the product name. This ensures that when an
application provisioning profile is used that it will correctly match
against it. This also brings it in line with the documented behavior.
Change-Id: I627d212f59d862e7a881941748db5ef98ab4f463
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
the sysroot flags need to be established even before setting up the
spec, because as soon as that happens, toolchain.prf will try to
determine the default paths and cache them.
this also fixes sysroot use in toolchain flag support tests, which run
(somewhat) independently from the toolchain setup.
Task-number: QTBUG-63483
Change-Id: I7be1540e766dac58fb16f63176aa8d2879b51ae0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Tell qtwaylandscanner to export the symbols when we're building a
module. This is done by specifying the include directory on the
qtwaylandscanner command line.
Task-number: QTBUG-68773
Change-Id: Ib575222261831ab01eb43e6c7caefb07e314492b
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated headers can now be installed using inject_headers and private_headers
instead.
Change-Id: I51d98e2e05d12aa9f6ab09f8ccb12b81a0c0cd6f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If CONFIG option no_include_pwd is set, moc does not add the build
directory to its include path. The path to the generated
moc_predefs.h file is by default relative though, resulting in
moc warnings:
Warning: Failed to resolve include "debug/moc_predefs.h" for moc file xxx myheader.h
Fix this by always making the path to moc_predefs.h absolute.
Task-number: QTBUG-69087
Change-Id: I8ef79c8340f9ebd6b0bba15e026d65ef3c088535
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This allows distinguishing between these tools and tools for the host,
when cross compiling.
While mac tools normally only are available on macOS, there are third
party efforts to port them to other platforms. In these cases, it
might be useful to use a prefix (either some sort of triplet prefix,
or an absolute path) to distinguish between the host build platform
compilers/tools and the ones for the cross target.
The use of this variable matches the one used in a lot of other
mkspecs, and shouldn't cause any issues for those who aren't setting
it.
Change-Id: Iaeba571d955ea79ed1249989fcc525eb1eaf1f5c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Do allow people to build from git using the Qt License Agreement 4.0.
The license agreement text is the same as in the installers, except
that some Unicode characters got normalized to their ASCII variants,
and things have been properly wrapped.
[ChangeLog][Licensing] The commercial preview license in the git
checkout has been replaced by the Qt License Agreement 4.0 text.
This makes it explicit that commercial customers of The Qt Company
can use the git version under commercial terms. However, support
is (still) only provided for builds from released branches of Qt.
Task-number: QTBUG-52222
Change-Id: I9e99b68e236a09610b798ba7a841e5a9d1ce6898
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
wayland-scanner.prf uses it as a trigger, so this is needed to make dynamic
non-prefix builds work.
amends 427e5d61b7.
Task-number: QTBUG-68773
Change-Id: Ia7d3bc39cb2b0f225e827f64eb17d061d594b265
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need -Zc:__cplusplus in order to enable the __cplusplus macro having
the correct value. This causes configure to now print:
Checking for C++14 support... yes
Checking for C++1z support... yes
and
Using C++ standard ..................... C++1z
Change-Id: I5d0ee9389a794d80983efffd152c95a4d9d8adbc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new build system in Xcode 10 requires outputs from shell script
to be explicitly declared if they are used by subsequent build phases,
otherwise the build system may attempt to search for the file before
it has been generated, causing the build to fail.
The build phase we use for Qt preprocessing (moc, rcc, etc), does not
list these output files, so we need to disable the new build system
for now.
Change-Id: I7404c19021f57489e985bd1203ad09ce9b83b090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
otherwise, names like "core" are too likely to clash.
note that the directories (which contain configure files) still need to
have unique names within one repository. that's unlikely to be a
problem.
Task-number: QTBUG-68385
Change-Id: I01c60479a6a45494ba60e798ceada231d8870556
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
making the dependencies on tools/ optional was meant to maximize build
parallelization, but it's just too fragile, as nobody ever remembers (or
even knows) about having to add the flags when necessary.
Task-number: QTBUG-68478
Change-Id: I85c0b65d5a63109aedc24bc17eaaaf46b777b634
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When QMAKE_TARGET_BUNDLE_PREFIX is set in the .pro file then
this value should be used instead of the default value for
PRODUCT_BUNDLE_IDENTIFIER. Therefore, PRODUCT_BUNDLE_IDENTIFIER
should be set inside default_post.prf so that it can take the
value of QMAKE_TARGET_BUNDLE_PREFIX after it may have been set.
Task-number: QTBUG-66462
Change-Id: Iec1e2a43632efe6021b9d6bfdb78bd941326c456
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need to make sure we don't emit CMake declarations for private
headers if those headers are absent. However, most of the time we have
private headers and should add them.
Task-number: QTBUG-37417
Change-Id: I639eb93d008de27928dedac540894af70c1883b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
don't put them into GENERATED_HEADER_FILES, as they obviously cannot be
found in a pre-synced source dir. instead, let the injection code itself
add them to INJECTED_HEADER_FILES.
Task-number: QTBUG-67813
Change-Id: Id2a7c565b14fcba8aba9d1dd8b1dd39c586d0d91
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
these are actually redundant with INJECTIONS.
Change-Id: I0a71930401e00d30c9898b4d958de5e89c496d18
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
the 'info' variable was re-used too early. make a new one 'infoargs'
instead.
Task-number: QTBUG-67286
Change-Id: I77881ecbfce338d653358c5e5edac84e1c0c7de3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In order to be able to build and test a testcase on an iOS device it
needs to be a bundle. So the app_bundle config should only be removed if
the testcase_no_bundle is set. This is already done by testcase.prf.
Task-number: QTBUG-45211
Change-Id: I4f16ea832ccff2a5db5fed0050fa0344b4ac9ad6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The android mkspecs had their own way of doing the same as optimize_size
Change-Id: Id05822df6bdeb8b3aafada2901bd61530c490fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
instead of relying on more or less accidental qmake behaviors regarding
the base dir for relative paths (esp. if a file does not exist yet),
make everything explicit. to that effect, clearly define the base tree
(source or build) for every syncqt-generated variable, and write only
in-tree relative paths to the variables. on the receiving end, resolve
the paths as soon as headers.pri was read.
Task-number: QTBUG-67111
Change-Id: I32ae5760fb62ebc650fdb69e46aac786a8141564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
that way we can create a config.log which is consistent with the end
state even if (some) tests are not executed this time around.
Change-Id: Ia953ede62d6640aab912559f435ceb1f9ec6d9dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove references to XKB and explain what to do if
pkg-config is missing or unwanted.
Change-Id: I099bf01ff49e1b8f6e822a50f0fe4904965a7a9f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For correct debug/ and release/ suffix substitution and thus avoid
concurrent access to generated files, we have to declare the output
directory variable used by qtquickcompiler.prf in qtdeclarative here and
enable it for substitution.
Change-Id: Id8483daffdf1b9990396c55f7bc0d08a2f65cafd
Task-number: QTBUG-66675
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The change causes a crash when compiling the xkbcommon 3rdparty
library and compile failures (qtimageformats on Android).
This reverts commit a47cb14680.
Task-number: QTBUG-67326
Task-number: QTBUG-67327
Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated files should be added to RESOURCES with an absolute path.
Task-number: QTBUG-67011
Change-Id: Ief82b576824df9abd0901970f076e30dfe57b7d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On Apple OSes, both compilers and linkers are given an absolute path.
For consistency, the same should be done with the C linkers.
The change is also a convenience to the MacPorts project,
which actively discourages ambiguous compiler names.
(https://trac.macports.org/wiki/UsingTheRightCompiler).
Change-Id: Ic1885aed825340696e9fde766788eebf51de3ff6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is needed to be compatible with latest Qualcomm BSP releases.
This patch also makes it possible to select HW layer via
QT_OPENWFD_CLIENT_ID and QT_OPENWFD_PIPELINE_ID environment variables.
Change-Id: Ie795b21afc61a1de7c1d0b52cdb30a754e3f8266
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit 00f693d3e5046999270c92731e34a3e7fcd01c6b)
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and make use of it.
it's a logical continuation of the 'arch' term, and will be used also in
qt3d's configure.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I940917d6763842499b18fffd1514c96889a0cc63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
with 40e87491 merged, 'QMAKE_CXXFLAGS' variable in
'win32-g++' toolchain became defined via 'QMAKE_CFLAGS'.
the similar can be found in 'win32-clang-msvc' and
'win32-icc' toolchains too.
this works for now, because such definitions just duplicates code
from includes, like 'gcc-base.conf', 'msvc-desktop.conf', etc.
but it would became broken, if changes would be applied to
'QMAKE_CXXFLAGS' definitions in that includes, prior
to the redefinitions in 'win32-*/qmake.conf' toolchains.
thus 'QMAKE_CXXFLAGS' definitions in 'win32-*/qmake.conf' toolchains
should not depend on 'QMAKE_CFLAGS' and be done explicitly.
in order to apply this change correctly to 'win32-icc' toolchain,
its 'QMAKE_CFLAGS' variable should become dependent on definitions
in the includes, similar to 'win32-clang-msvc' and
'win32-msvc' toolchains.
Change-Id: I5e820e44a769a590ba63f70dcb3a115311093311
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
contains() interprets the regexp as being implicitly
anchored, so the leading part of the path needs to be
explicitly matched.
Change-Id: I1efa07dc99bb2db1717d2a66621899e23c144164
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
$$RCC_DIR can be absolute, so simple concatenation with $$OUT_PWD is
bound to fail.
Change-Id: Ibd80c49656c0e03b8a86ebca851af106cced08fb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
