The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- avoid calls to private and virtual functions, if the device is not
open;
- avoid repetitive checks in loops;
- add missing checks in readLine() overloads;
- remove check against unsuccessful resize().
Change-Id: I973d5931163b25db1c09c7c3b66f29ea90bb1b29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Before this change, next() was the only way to advance the iterator,
whether the caller was ultimately interested in just the filePath()
(good) or not (bad luck, had to call .fileInfo()).
Add a new function, nextFileInfo(), with returns fileInfo() instead.
Incidentally, the returned object has already been constructed as part
of advance()ing the iterator, so the new function is faster than
next() even if the result is ignored, because we're not calculating a
QString result the caller may not be interested in.
Use the new function around the code.
Fix a couple of cases of next(); fileInfo().filePath() (just use
next()'s return value) as a drive-by.
[ChangeLog][QtCore][QDirIterator] Added nextFileInfo(), which is like
next(), but returns fileInfo() instead of filePath().
Change-Id: I601220575961169b44139fc55b9eae6c3197afb4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
While QFileSelector is documented to work on files, select accepts
arbitrary URLs. Moreover, the QML engine can end up intercepting
arbitrary (user provided) URLs, including to directories.
Prior to this change, passing "file:///" or "/" to the function would
break: We would temporarily get a "//" path, which is invalid, and thus
we would return an invalid in the end.
Prevent this by only appending a slash to the path when it doesn't have
one.
Fixes: QTBUG-85410
Pick-to: 6.2
Change-Id: I1d2807a9d225df611c3a5e871e3c1d90a6a25953
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QSettings encodes QVariants as @Type(data) strings. If that data contains
a null-byte, we write the string as UTF-8 encoded CFData. When reading it
back we look for a @ prefix, and then pass it as UTF-8 through stringToVariant.
The problem arises then the user writes raw QByteArrays with a @ prefix.
We can detect this situation by checking the result of stringToVariant,
and if it's just a simple conversion of the string into a QVariant, we
know that stringToVariant hit its fallback path due to not finding any
embedded variants.
If that's the case, we return the raw bytes as a QByteArray.
Pick-to: 6.2 6.1 5.15 5.12
Change-Id: I4ac5c35d0a6890ebea983b9aca0a3a36b0143de2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The ${QT_SOURCE_TREE}/src/network include paths of several tests are
apparently not needed anymore. Remove those.
tst_qfilesystementry and tst_qfreelist are the only tests that actually
need to reference files in qtbase's source tree. Simply use the paths
relative to the project file.
Task-number: QTBUG-88090
Change-Id: Ic6f341e001338c1b07dce6e58316245bc9560c5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The decltype() of a const auto variable will be const T, for some
T. GCC warns that in the static_cast, said const is ignored.
Fix by not casting, but declaring a variable of fitting type. Add a
scope so the next reader doesn't have to go hunting for further uses
of 'readResult' or, now, 'expected'.
Change-Id: Iebc828a522810c6f2514fb3542d8c76c755ec7a5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Due to mistake in data it was missed for testing.
Pick-to: 6.2
Change-Id: I4dcd6fd90fd501e4cc941c07efcf9439ba6acf30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Amends 16f927a4f1.
At the time the original change was written, QStringTokenizer
had not been integrated, yet.
Change-Id: I83c31d816199bc48c4baea855d13cbf9eda9aaa2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The change in 004e3e0dc2 introduces
Windows junction awareness, though users were still unable to resolve
the junction target. This change adds the ability to solve this.
Fixes: QTBUG-93869
Change-Id: I9f4d4ed87b92e757f7b6d8739e2a61b58c096f63
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Split the code out of QDir::fromNativeSeparator into a separate
reusable function to remove the above-mentioned prefixes. Fixes
and unifies behavior if the prefix was given with slashes instead
of backslashes. Add a couple more test cases.
Fixes: QTBUG-93868
Pick-to: 5.15 6.0 6.1
Change-Id: Ibd94ae283e2fb113f9c2db97475fbc7d89522bbf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Both functions now return a result object. Eliminates the need
to pass the errorMessage out-parameter. Adapt auto-tests.
Change-Id: I110b68fedc67b01f76796c44fa55383b2cc03460
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
After commit 3966b571 the function was kinda broken already, though
this got unnoticed since it was not covered by an the auto-test.
This commit adds another test case with Windows native separators
and removes the use of QDir::fromNativeSeparators. Instead use the
original code from QDir::fromNativeSeparators to replace the backslashes.
Pick-to: 5.15 6.0 6.1
Change-Id: I190560d0e75cb8c177d63b142aa4be5b01498da2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The commit amends commit 3966b571 to take UNC prefix into account as
well. Fixes the weird file name output as reported in QTBUG-74291 and
QTBUG-83365. Replace manual separator normalizing in qt_cleanPath(),
this is another spot where UNC prefix handling needs to be applied.
Also make QTemporaryFile operate on '/' as file separators to fix
creating both file types with native path separators on network shares.
Fixes: QTBUG-74291
Fixes: QTBUG-76228
Fixes: QTBUG-83365
Pick-to: 5.15 6.0 6.1
Change-Id: Iff8d26b994bf4194c074cd5c996cda3934297fa5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QCOMPARE made dead code of a more verbose QVERIFY2 below
Change-Id: I26b8286f61534f88b649fffd166b67d8603280a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Windows wants ISO C++ _fileno and _unlink instead of posix fileno and
unlink. For fileno we have the QT_FILENO macro in qplatformdefs.h, so use
it. For unlink we don't have a macro in Qt, so declare one in the test.
Change-Id: I56c5c3fb4e500769c744132c46107816f89bb2c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It usually fails the test with "corrupted size vs. prev_size" message
coming from malloc() or some other memory allocation routine (which
signals about memory corruption probably)
Task-number: QTBUG-93176
Change-Id: I5e34971267c52c63cda2489bef5b09bed739f532
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 6d52d86b999088ec07e58c14197bddda043ef0aa)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
For QProcess, there is no point in suppressing recursive
QWPR::readyRead() emission, as the former manages this logic itself. On
top of that, the non-recursive nature of QWPR::readyRead() indirectly
disallowed reading from the channels inside
QProcess::waitForReadyRead(), if that is called from a slot connected
to QProcess::readyRead().
QWPW had two signals, one allowing recursion and one not.
This commit allows recursion of QWPR::readyRead() and
QWPW::bytesWritten(), and moves recursion suppression to the higher-
level classes. This makes the code more uniform and efficient, at the
cost of a few duplicated lines.
Change-Id: Ib20017fff4d92403d0bf2335f1622de4aa1ddcef
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
pro2cmake did not take into account the
QT -= qt
bit of the .pro files.
Fixes: QTBUG-91676
Change-Id: If1373ee966312e4246490bd7389d75be9fa739cb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MSVC generates the following for those tests:
warning C4996: '_open': This function or variable may be unsafe. Consider using _sopen_s
instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online
help for details.
We need to set the define before any C runtime headers are included, so
do it right away, it doesn't do any harm on other compilers.
Change-Id: Ia25afb87934058c3f27e63820eeb2db063a627f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We haven't used the spawn functionality on QNX since Qt 5.7 (commit
005a8bfbf0) because that's when we dropped
support for QNX 6.5.0.
Change-Id: Ic90d8429a0eb4837971dfffd1664f9712bdce2d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
And set *pid to -1.
[ChangeLog][QtCore][QProcess] If a startDetached() fails to start the
target application, the QProcess object should now have a proper error
string in errorString().
Pick-to: 6.1
Change-Id: Ic90d8429a0eb4837971dfffd1664e825ffcb923e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
That qWarning cannot be in the child process (we don't know if a user
logger is fork-no-exec-safe) and the failure to chdir() should be
reported as a failure in QProcess::startDetached() instead.
Change-Id: Ic90d8429a0eb4837971dfffd1664e7577c81610b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: David Llewellyn-Jones <david.llewellyn-jones@jolla.com>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
gcc 9 consumed enourmous amounts of memory building the test, regularly
dying on a VM with 4GB RAM. Splitting it up helps.
As a drive-by, use inline static variables, and rename the header used by
other tests to tst_qmetatype_common.h.
Change-Id: Ib716d8e3506aac6c87845e57b04cb1a4f6c68387
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Android doesn't have a trash bin, so this test is not valid for that
platform.
Pick-to: 6.0
Fixes: QTBUG-89398
Change-Id: I119b25682ba18e18466b5687cae369445dc73311
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When writing out a float value, the output string is encoded as QVariant
for no reason. Looks like an oversight when QMetaType::Float was added a
long time ago.
Fixes: QTBUG-21156
Change-Id: I7f5d31e15892d700c1b1e5e731b7733ce3a15730
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The Android tests were marked insignificant for some days, due to an
emulator issue, these tests slipped during that time. Exclude them now
to bring Android tests back.
Task-number: QTBUG-89398
Pick-to: 6.0
Change-Id: Ia65a0ae8d7474fd2554dda299a60371dbbc9dddb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix indentation in tst_qlockfile and remove QtTest include in
tst_qcheckbox.
Change-Id: Idf630c6337859dbcc8f644010b941bfe55bb0633
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][QtCore][QProcess] Added support for
setStandardOutputProcess() with startDetached().
Change-Id: I61278cdb7084127f583c8c017688da392017b44c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[ChangeLog][QtCore][QProcess] Added support for QProcess::MergedChannels
mode with startDetached().
Change-Id: I953ad2063322015332269522a297f8e2842e438c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
/dev/zero and /dev/null are expected to always be present in any system
(even containers). Unlike /dev/null, you *can* read from /dev/zero so
test that QIODevice doesn't think it is random-access because of that.
/dev/tty is also always present but has an interesting semantic. Could
also try /dev/full, /dev/random and /dev/urandom.
Change-Id: Ia2aa807ffa8a4c798425fffd15d84b60573f2c26
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
There's an assertion. Found by Google fuzz scan of CBOR data.
Pick-to: 6.0 5.15
Change-Id: I55083c2909f64a1f8868fffd164f1ff3af71605b
Reviewed-by: David Faure <david.faure@kdab.com>
It was previously untested
Task-number: QTBUG-88183
Pick-to: 6.0
Change-Id: Icc59fc632957a75cac8c7f5e2a1aed88a1c9ff9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Conform to the XDG Base Directory Specification:
"If, when attempting to write a file, the destination directory
is non-existent an attempt should be made to create it with
permission 0700. If the destination directory exists already
the permissions should not be changed."
At the same time the spec states about XDG_RUNTIME_DIR that
"its Unix access mode MUST be 0700", so don't consider the
directory with wrong permissions correct and use a fallback.
Task-number: QTBUG-68338
Pick-to: 5.15 5.12
Change-Id: I03c6b35b3f7d5ceb8e6326695bfc8207da92ea67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Suppress warning:
..\tst_qprocess.cpp:272:13: warning: 'void childProcessModifier(int)'
defined but not used ...
Change-Id: Idf601df78be256cfbee0ca80252d1c364c712c8e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
These look like leftovers (API flaws).
Construction of QFileInfo from QString (or similar) should be not
implicit, as QFileInfo construction is expensive (might hit the file
system), and this may have users overlook APIs (for instance build a
QFileInfo out of QDirIterator::next(), instead of using ::fileInfo();
using QDir::entryList instead of entryInfoList; etc.).
Leave an opt-out mechanism to ease porting.
Fix a handful of usages around qtbase, with at least a couple of them
likely to be actual "sloppy" code.
[ChangeLog][Potentially Source-Incompatible Changes][QFileInfo] Most
QFileInfo constructors are now explicit. The
QT_IMPLICIT_QFILEINFO_CONSTRUCTION macro is provided to keep old code
working.
Change-Id: Ic580e6316e67edbc840aa0c60d98c7aaabaf1af6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
