In order to get winrt CI checked, the network tests are being skipped
for now. As soon as winrt has landed in CI, these will be fixed and
re-enabled.
Task-number: QTBUG-68297
Change-Id: I692d72f9e0c97840bd7396551b4e707eec845ebb
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
A mysterious file c:\dev\null appeared when running the auto tests on
Windows. Fix by using QMAKE_SYSTEM_NULL_DEVICE.
Amends 5f3529be32.
Change-Id: I0224a9ccd61c4f10b2ddb8f8d690e1849aa88d8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Both of the new toolchains (armv7 + arm64) have some problems with d-bus
tests. Skip them until the toolchain has been fixed.
Task-number: QTBUG-60263
Change-Id: Ic300f419635fb6b49b3ea7f48fa76c19088c88bd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We should not check for platforms, but rather for features. Also, if
dbus is available it doesn't automatically mean that QProcess is.
Change-Id: I27ef5863fcb107cca1aa47abba95b734962adc33
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This change disables tests which require QtGui.
Change-Id: Ib647afd086f54536054cb4c0cde5696d762ee8c4
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
The auto.pro file would bail out or skip based on the availability of
the session bus at qmake time. That does not make sense for cross
compilation: the session bus may be available on the target even if it
is not on the compilation host.
Change-Id: I459a518f3411acb39e8dcdad9d32ded1f9b57029
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without piping the output to /dev/null, we'd get the following:
sh: dbus-send: command not found
And if dbus support is only limited to runtime support, we don't
treat it as a fatal error and only notice the user.
Change-Id: Ia7750a074b8d563bf9694fa8fa628b4017e8bb68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Important flags are not passed from mkspecs to cmake like SYSROOT,
CFLAGS and CXXFLAGS.
Change-Id: Ie318d19c1aebacdb845638e5f80c2ecb8e6ac8bb
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
It was printing the following error:
arguments to dbus_validate_bus_name() were incorrect, assertion "name !=
NULL" failed in file dbus-syntax.c line 248.
This is normally a bug in some application using the D-Bus library.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0586189ba3a79
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This is a temporary measure while the Qt CI system is updated to have
the correct D-Bus configuration. Once it is fixed, this commit should be
reverted, so that we don't run into the situation in which the tests
aren't getting run on some configurations and we never know about it.
Change-Id: I7192d4d95a60dcb63acfa6cc90bfdc58592b0664
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Otherwise the output is too intertwined.
Change-Id: I6729727b3afcdcbec58e3fa560587dd1fa08f38e
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The Qt CI system runs the unit tests after installation, but
with the qmake in the build directory. This means that the
installed content is not unit tested. Add an additional cmake
unit test to test the files in the install location.
The new test is marked insignificant for now until the true
effect on the CI system is known.
Task-number: QTBUG-27315
Change-Id: If9f12e88cfc741946cfabc25dbf789a11a2af4b8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Redoing 5704cbc462
This can't work, because the define comes from qconfig.h, not qmake.
Skipping initTestCase and cleanupTestCase when QT_NO_PRINTER is
defined.
Change-Id: I2527c018294b7518a4692f2c93da933848640b5d
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Exclude printsupport tests from the build when QT_NO_PRINTER is
defined.
Change-Id: Iedae91666a599f4b77250abc8aac14c256fde34e
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
contains(QT_CONFIG,opengl) tells whether Qt itself is able to use
OpenGL, which is not the same thing as whether the QtOpenGL API is
available. Make the check correct; fixes compilation when Qt is
configured with -no-widgets (which also disables QtOpenGL).
Change-Id: Iaa296c2b10650971ef4846f8bc6f44761fadcf7c
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
removed printsupport tests for wince as there
is no print support on wince and removed the special
handling for wince from 4.8 on some tests as the dependent
modules are not part of qt base anymore
Change-Id: I4ffb22da11f98beee1013f775cb5ce4b936d3211
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This will allow the CI system to run the tests. The tests are only
run if cmake is found.
Change-Id: Ie73a56114c151871160bafcbf0b90b2d54620855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
There are many tests, examples that depends on widgets. This patch
disables some of them if Qt is configured without widgets.
Change-Id: I5460dadca736c54221874adcd518a7021725d90a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A number of network autotests are unstable in Windows, so don't
generate check target for them as is done for mac.
Once the tests are acceptably stable, this needs to be reverted.
Change-Id: I18262e28ce40eba541aecf3cfb651bff34698ead
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
We want the autotests for the QtWidgets library to be run on Mac OS X as
well.
Change-Id: Ie731b802b64222c84116e2df82f536acf4971565
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QtV8 library is going to live in the qtjsbackend module.
Change-Id: I72251316163829411dda998b9503ce6f75b3606a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Failing tests are marked with CONFIG+=insignificant_test.
tst_QTextLayout currently asserts, so it has been disabled to prevent
destabilization of the CI system.
Change-Id: I7bd836ee14085689c8a0f0ce8e3c80d81a55eb94
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QSql test currently crashes, which can destabilize the CI system
when attempting to re-enable the autotest. Skip this test for now by
disabling the check target for it.
Change-Id: I598f8ca7bce6b6f46daf6a053da5571b62486463
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
These tests aren't actually enabled due to the lack of dbus, but there's
no reason to explicitly disable the check target because of it.
Change-Id: I685008060c8e8d713cd27e7684cf3d474c0cf55d
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
