Testlib's signaldumper functionality would crash inside
testlib as it dereferenced the sender after it was deleted.
Change-Id: I6013b75b0a121e2768429d8a3cf0339a940314f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test is not failing anymore on QEMU targets.
This partially reverts commit
71bd06d516.
Fixes: QTBUG-71915
Change-Id: I68593edf0ec245e14879833c8aa90661a3c2e227
Reviewed-by: Liang Qi <liang.qi@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This functionality is especially convenient if meta-object system is
heavily used in a test. For example, if you need to test a bunch of
signals based on their names and/or argument types.
Change-Id: I09a4ecbbd3d0859b5fd466d9dde7679804eb7614
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This show cases the new cleaner subdirs handling code in
pro2cmake.
Change-Id: I25001942ef020e4c4191b355f55309c4fb033ecc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When accidentally running a test doing screen-grabbing
with High DPI scaling active, sizes of the obtained pixmaps
can differ due to the device pixel ratio. Add a check to make that
clearer.
[ChangeLog][QtTestLib] Comparison of QImage, QPixmap now checks for the
device pixel ratio.
Change-Id: Id8d5187e99c565c44a7bfb8b9cfb09737815fb15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This will help with future regeneration.
Amends 6d1c695b0e
Change-Id: I2454dc36cfc00f7aad72488fb7927d7807978fd8
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Actually build tst_selftest
Fix the subdirs of it not to be actually built as tests (so that ctest
doesn't pick them up and tries to run them)
Change-Id: Id9d069f44241027dbd103884d36551163382b216
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I23bc9693fb9f553fd63d10687d51322394717ed7
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
If the deadline is far in the future, the conversions to nanoseconds
or internal arithmetic may overflow and give an invalid object, thus
the deadline may end up in the past. Added a test to the testlib
selftest for sleep.
[ChangeLog][QtCore][QDeadlineTimer] Fixed integer overflows
leading to immediate timeouts.
Task-number: QTBUG-69750
Change-Id: I9814eccdf9f9b3add9ca66ec3e27e10cd5ad54a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The test was added as commented in 2012, before it was not even
mentioned in the pro file. I guess it was never run.
Change-Id: Ib787c7811ab4f7f32a99869167cde2e12dbe3156
In particular, document the mis-behavior it takes for granted in one
test. Renamed some variables so that they're visually distinct from
one another and actually mean something intelligible. Renamed the
sub-tests to say what's actually happening. Reading the test output
now at least makes it possible to see what's wrong. I'll fix that in
a later commit.
Task-number: QTBUG-61774
Change-Id: I3e5f83b8baa3c6afbca9231b5bbc89d17f3e57e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The QTest::qCompare() implementations were almost duplicates; pull the
common code out into a templated version. Tweaked the
QTest::toString() specialization for float and double (a macro) and
fixed a bous modifier in double's format.
The doubleComparisons and floatComparisons tests in the tst_float.cpp
selftest shared a large block of tests in common, aside from the
difference of type. Break this out into a templated static function
to save duplication.
This prepares the way for using the same templated code for qfloat16.
Change-Id: I2823fd006910c5ff88335d625d1fa05cb7753513
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In QCOMPARE, handle NaNs and infinities the way tests want them
handled, rather than by strict IEEE rules. In particular, if a test
expects NaN, this lets it treat that just like any other expected
value, despite NaN != NaN as float16 values. Likewise, format
infinities and NaNs specially in toString() so that they're reported
consistently.
Enable the qfloat16 tests that depend on this QCOMPARE() behavior.
Refise the testlib selftest's float test to test qfloat16 the same way
it tests float and double (and format the test the same way).
This is a follow-up to 37f617c405.
Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
The silent and blacklisted selftests of testlib end in a qFatal(), to
test its messaging is handled correctly. However, this prevents hooks
in main() from saving coverage data when we're gathering that. So use
a transient signal handler that longjmp()s back to a setjmp() just
before the qFatal() to let the test complete normally (but, since
qFatal() does something different on MS-Win, don't apply this to it).
Note that testlib's internal FatalSignalHandler handles all fatal
signals *except* SIGABRT, so this isn't over-riding it. (In any case,
this restores the prior signal handler in setjmp()'s catch branch.)
Added missing expected_silent.tap test output while checking that this
change doesn't affect (the rest of) the test output.
Change-Id: I7e460581ad93e26639c066b3229438a66fd299de
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
It isn't being built in the current qmake build either (maybe because it
doesn't build because uses sleep())
Change-Id: Ie97287c6e45d1fcc32063bd9eb37ff2907dfa891
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Non-local ASM labels break for this test when compiled with clang.
Change-Id: I15bd250a991c3b03bbc88459a6358090bd157444
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Based on Asmo Saarela's advice (QTPM-686), adapted on advice from
FrogLogic support and converted to a feature so that the selftest and
testlib qmake config can be co-ordinated.
Task-number: QTPM-1385
Change-Id: Icd706f086009e1e08b3f8c5cd553f792402e28c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The output files for the tuplediagnostics selftest of testlib had a
stray non-canoical path fragment in them; so replaced with its
canonical form.
Change-Id: Ib421380036c3fb1b91447eb8c87be4ad0dfe5c96
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Verify that it does cut in after the specified time has elapsed.
Task-number: QTPM-1385
Change-Id: Ib18e8d6af28339f79cca4d62b869287ce07b8cc1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Match the environment tst_selftests.cpp uses for subtests more
faithfully. Extends b22e50acda. In the process, tweak how crashers
are handling, in preparation for the watchdog test.
Change-Id: I09a046460f6f3bff0b12069fad6c1437d89572ce
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
One test for bad data for the column, another for a bad QFETCH.
Incidentally extend blacklist testing by blacklisting them.
Reorganise a QEMU condition that needed extended as part of this.
Task-number: QTPM-1385
Change-Id: Iac72ada19760321c5c9264ddfff7740d1fdd0700
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
QTreeWidget::(is|set)Item(Selected|Hidden|Expanded)() are deprecated
for a long time but not marked as such. Therefore explicitly mark them
as deprecated so they can get removed with Qt6.
Change-Id: Ie4971350de61326811e0788df0d359ed3c442869
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It's not actually exercised by anything in our source tree, but is
potentially useful and has been part of the documented public API for
some time. So mention that the caller is responsible for delete[]ing
its return and add a test that exercises it.
Task-number: QTPM-1385
Change-Id: Ifc5284b9eb1b678cf3c9708c681311e874838fc6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QTreeView/TableView::sortByColumn(int) was deprecated a long time ago
but never got removed. Therefore mark it with QT_DEPRECATED_SINCE(5, 13)
so we can remove it with Qt6.
Also sync the handling of the sort order changes in QTableView with the
one from QTreeView.
Change-Id: I0371d9a9c21116edaa9125835827f1a200075d36
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In the process, corrected an inaccurate XFAIL message (an XPASS is
normally an error, unless blacklisting ignores it so turns it into a
BPASS). Added the missing .tap file to its expected output.
Documented the similarity to the silent/ selftest.
Task-number: QTPM-1385
Change-Id: Id74a1353d54af2f3bfe2c764e33c1f051958ab21
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The testlib selftest sets various things in the environment for
crashing tests; the generator for its expected output should set the
same things, as they affect what output is produced.
Change-Id: Iec2ed59982ea1043582573530c33619d8e8ed08e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If the two lines have identical texts, the comparison returns true.
So don't complicate various other conditions on the way there with
filtering out that case; deal with it first so they don't need to.
Change-Id: Iebd230704ce5f53d12d5afa64aab30f83bb9d407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Before the fix is applied this test fails because QFINDTESTDATA will
return "/usr/" instead of the folder with the same name in the current
directory.
The 'usr' folder can't be located 'next to' the application since this
does not trigger the issue (QFINDTESTDATA looks for the folder next
to the executable early on). So we put it in a subdirectory and change
the current working directory to its parent directory.
Change-Id: I627679dcb6f2f6954264e23bfc1a71de3bff7203
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Currently when doing comparison with std::tuple the fallback toString
method is called which returns a Q_NULLPTR thus not allowing proper
diagnostic of the values that triggered an error. This patch
adds support for std::tuple to improve the tests output readability.
[ChangeLog][QtTest][QCOMPARE] Now outputs contents of std::tuple on
failure.
Change-Id: I046a55e2ce44c3f7728d51e4745120d38aa5e007
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This supplements b1945604a7, which
removed the qrc file in favor of test/test.pro coding for it.
Change-Id: I15507c89ca14fa6e6b8223de671ffff7092272d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Put it in alphabetical order like the rest of the list.
Change-Id: I3da3bb68d1847f53419bb79490b946c935ebb518
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They didn't exist up until now, and future patches rely on them, so
add them.
Change-Id: I8afdb9417263b45d43355c688a813bdf99ea5fc8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
When generate_expected_output.py is run for an in-source build, the
raw output contains no paths to the sources for the script to whittle
down, as it does for shadow builds, to just the path from qtbase down.
So kludge together some extra regexes that can fix that up and tweak
some relevant code to provide them with the data they need.
Change-Id: I656d7126087bd9ad20b2af6835fba314d90a171d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is what the other reporters also do, in various forms.
Task-number: QTBUG-67351
Change-Id: I16f2c4e0991176145ee0fbcbbfeeda071603a3c2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The Test Anything Protocol (TAP), was originally Perl's simple text-based
interface between testing modules and test harnesses, but has since been
adopted by a large number of producers and consumers in many different
languages, which allows colorizing and summarizing test results.
The format is very simple:
TAP version 13
ok 1 - test description
not ok 2 - test description
---
message: 'Failure message'
severity: fail
expected: 123
actual: 456
...
ok 3 - test description # SKIP
1..3
The specification [1] is very brief, so the implementation has been
based on how typical consumers behave, especially when it comes to
the undefined diagnostics block.
[1] http://testanything.org/tap-version-13-specification.html
Change-Id: I616e802ea380165c678510e940ddc6607d39c92d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Using QFileInfo to check if the file exists based on the filename
alone ignores the fact that all the expected files are embedded
as QRC resources.
The expectedResult() function already does a similar check, so we
can use that directly instead of checking twice if the file exists.
Task-number: QTBUG-66981
Change-Id: I0beb8d3503ed49682ae7d7e2a5172922fab5420d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Otherwise random debug messages from Qt might mess up the expected vs
actual results.
The setting of QT_LOGGING_RULES in initTestcase has been removed, as
the selftest overrides that for each invocation of a subtests, via
the processEnvironment() function.
Task-number: QTQAINFRA-1631
Change-Id: I855d31274f8261f8b125df23409353f7101be0e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Instead of keeping a static list in a qrc file.
Change-Id: I7783db5cad5929cc3f449889e1cbcbb87f7f2637
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Silence debug output by setting QT_LOGGING_RULES
to turn off all debug output.
Task-number: QTQAINFRA-1631
Change-Id: I5c2366b4fe4bac341dcfd92f68b6da8071c5b089
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
After a37785ec76 went in, it become
apparent that multi mouse button state handling in qtestlib is
non-existent, for details see QTBUG-64030 and QTBUG-63786. What
happened behind the scenes often was not what one would expect based
on the provided QTest::mouse* input sequence - events went missing,
incorrect events were generated, each subsequent test function
started with a state set from the function that run earlier. It is
easy to see how a minor change in one test could easily affect outcome
of other tests.
With a37785ec76, Qt platform plugins
are now responsible for sending explicit mouse button type and state
information; qtestlib should take full responsibility now as well.
But using the new API from a37785ec7 alone in qtestlib is not sufficient.
We need to reset mouse state between each new test function run (we do
this at function scope as that fits with the current qtestlib API user
expectations). This patch implements the necessary reseting logic.
Updated tst_qwindow.cpp::generatedMouseMove() to use QTest::mouse* APIs.
That test requires pressing multiple buttons, it was not possible with
QTest::mouse* APIs before this patch.
Added an auto test for multiple mouse button pressing/release in
tests/auto/testlib/selftests/mouse/. And few other tests which are
currently QSKIP-ed, but should be considered when re-designing qtestlib
APIs.
Task-number: QTBUG-64030
Change-Id: I39fdcbc73a467a7463ce2aed622bf22484095635
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add formatting for registered enumerations based on QMetaEnum
and unregistered enumerations as hex values.
[ChangeLog][QtTest] QtTest now prints values of QFlags that failed to
compare with QCOMPARE.
Task-number: QTBUG-65845
Change-Id: I3eae6d20d3c0d72441ca6c4037d9a8dafa4b6357
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The "crashes" subtest has several "expected" reference files. The matching
one was previously determined by checking the line count of the output.
This however does not work when there are several reference files with
identical line count as is now the case with boot2qt.
Refactor the comparison code from the QTest/preliminary void return to
the bool f(QString* errorMessage) convention so that all files can be tried.
While doing so, streamline the code and remove numerous unneeded
allocations of strings and regular expressions per compared line.
Task-number: QTBUG-65845
Change-Id: I722159d1753f2a36f0e497e315ffd81cb58cac0b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It has been observed that sometimes the output is not captured by QEMU.
Task-number: QTBUG-65845
Change-Id: Iddf888fb3aa019209dbe71f424d87884471784e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use qInfo() instead of qDebug() in case QDebug is turned off.
If the 'diff' tool is available, write the output to temporary files and
run diff on it. Otherwise, print the lines as was before, but onto one
stream to avoid indentation by the testlib handler.
Change-Id: Ib5a5dfb66ce481b493b85b915aa8c785ecb6b387
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move the modeltest autotest in the right place, and fix the
other autotests that were using it to use the version now in QtTestLib.
Change-Id: Ic6838945f616d580f357c872ce0956c341be3b16
Reviewed-by: David Faure <david.faure@kdab.com>
Currently, when two colors are equal except for their alpha values,
QCOMPARE produces the following failure message:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #ff0000
Expected (colorB): #ff0000
By using the HexArgb format instead of the default HexRgb, we can
see the full hex string, with alpha values included:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #88ff0000
Expected (colorB): #ffff0000
Task-number: QTBUG-55574
Change-Id: Id82c60a1b473ac6025a6f6ac560fce95a910d782
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On some systems (e.g. Debian/buster) a standard Qt package may install
a qtlogging.ini file, e.g. in /etc/xdg/QtProject/, which suppresses
QDEBUG output. A ~/.config/QtProject/qtlogging.ini could interfere
similarly. This can break the selftest, when run with expected_*
files generated without such interference. Likewise, if those
expected_* files are generated on a system such similar, they won't
work on CI. Given that this caused confusion and delay with
integrating the latest set of updates to the expected_* files, it
seemed best to save others from similar bafflement.
So set a standard value for QT_LOGGING_RULES in both the selftest and
the generator script, so we get consistency.
Change-Id: I649e2f1f6ead21edf8af051aaee286e369fed064
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
In selftests.qrc, imposed alphabetic order (on stem of name, then on
suffix, effectively treating . as sorting before any letter) while
removing old tests and adding new tests and data. Updated all non-csv
files and added many missing files. (Not clear on csv support status;
the script seems to have dropped it after 5.6, but the test still uses
it.)
Left expected_crashes* alone (no new files added, no update to old) as
I don't get results resembling those anticipated.
Omitted printdatatagswithglobaltags, printdatatags due to dangling
hspace on output lines, which upset sanity-bot. A change to the test
cpp is needed to make it viable to skip that dangling hspace.
Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This makes qtestlib behave more like real Qt applications with an
event loop, where exiting the application does indeed flush deleteLaters.
And since every test method is supposed to be independent from other
test methods, we should even cleanup between tests.
For "app less" tests, no flushing happens.
Real life use cases:
* A unittest for some code (e.g. KIO job) which uses a socket, runs an
event loop until the socket communication is done, and ends. However
slotDisconnected() does, as recommended, socket->deleteLater(). So the
test finishes before the socket has a chance to actually get deleted,
and memory leak tools flag a memory leak, which doesn't actually happen
outside the unittest.
* Deleting a QWebEngineView with deleteLater is even worse than a memleak,
it leads to an assert (from a global object destructor) in QtWebEngine
if the view deletion hasn't actually been processed.
Change-Id: I18fc822fd26988a0fa4e75313c1947fcaa7d9e56
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
Added flowId='name' to each message when using TeamCity logging format.
This is necessary to distinguish separate processes running in parallel.
[ChangeLog][QtTest] Added flowId to messages when logging in TeamCity
format. FlowId is used to distinguish logging from multiple processes
running in parallel.
Change-Id: I7f5046c1058ff02770404caa2c9b3a5398f97f6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two more ways line numbers were making it through.
Corrected a doc-string to tell nearer to the truth.
Change-Id: I946aaeb936d47fffe50d7ec15e2524992cc9e428
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Document that the saved output is used by tst_selftests.cpp and use a
crude parse of it to get the list of subdirs that it actually tests.
Change-Id: I73023228c9e547f965b7749dd66de7ef09c3815e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Currently when doing comparison with pair-like classes the fallback
toString method is called which returns a Q_NULLPTR thus not allowing
proper diagnostic of the values that triggered an error. This patch
adds support for QPair and std::pair to improve the tests output
readability.
[ChangeLog][QtTest][QCOMPARE] Now outputs contents of QPair and
std::pair on failure.
Change-Id: Ib0b4aad7640590d56275b6f1306fb9fb39fa81bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two changes are needed to pass tst_Selftest on QEMU
1. Pass QEMU specific env variables to the subtests
2. Ignore output on stderr on some tests when running on QEMU
Change-Id: Ie1f722fd183aac5973e87d408005e06cbafcde17
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The future tests don't need QtConcurrent as QFuture and friends are in
QtCore. The printdevice test doesn't use QtNetwork and the lancelot as
well as the testlib tests don't use QtXml.
Change-Id: I150ac99b36682aa23ad22ba943266eb0f0952838
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
This one selftest is currently blocking OS X 10.11
from entering the CI. It can't be reproduced when
run manually.
Task-number: QTBUG-55155
Change-Id: I4553ef2d7813b29f5dc8577976c4482686346504
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Restructured, separated the canonicalising of output lines out (into
an object that prepares the necessary regexes and replacements)
suppress more, changed the path-stripping to strip qtbase's parent
rather than os.getcwd() and took account of shadow builds (so both
source tree and build tree provide prefixes we want to strip from
paths). Also cope with $PWD potentially having symlinks in it, where
os.getcwd() is canonical.
It's possible some output might name files elsewhere in the source
tree; these won't be filtered by the prior cwd prefix removal; and, in
any case, the problem with cwd is only that the ancestry of qtbase is
apt to vary; paths relative to there should be consistent between test
runs. This change shall lead to a one-off rewrite of all expected_*
files; but it should now catch all paths. By stripping both build
root and source root (when different) it also avoids differences for
those doing out-of-source ("shadow") builds.
In our XML formats, any hyphens in root paths (e.g. I had Qt-5.6 in my
build root's path) got represented by a character entity, confounding
the replacement; so also do replacement that catches this. We may
discover other character entity subsitutions needed along with this.
Now filtering line numbers and timing information, including benchmark
results; these numbers all get replaced with 0 to avoid noisy diffs.
Also purging dangling hspace, to placate sanity-bot.
The module can now be imported - the code it runs is packaged as a
main() function that a __name__ == '__main__' stanza runs - and all
data is localised to where it's needed, rather than held in globals.
Tidied up and organized the existing regexes. There are doc-strings;
there is a short usage comment. Data is localised rather than global
and modern pythonic idioms get used where apt.
Regexes are compiled once instead of repeatedly. An object looks
after the list of patterns to apply and its construction handles all
anticipated problems. Failures are mediated by an exception.
The output file now gets written once, instead of twice (once before
editing, then over-write to edit), and Popen uses text mode, so that
write can do the same. Its command is delivered as an array, avoiding
the need to invoke a shell.
Instead of relying on qmake being in our path (which might give us a
bogus QT_VERSION if the one in path doesn't match our build tree), use
the relative path to qmake - we rely on being run in a specific
directory in the build tree, after all. Escape dots in the version
properly, so that 51730 doesn't get mistaken for 5.7.0 (for example),
and moved this check later in the sequence (matching a smaller target
makes it more likely to falsely match).
Overtly check we are in the right directory and tell the user what we
actually need, if run from the wrong place. Simplify handling of the
unsupported use-case for MS-Windows (but note what would be needed for
it).
Change-Id: Ibdff8f8cae173f6c31492648148cc345ae29022b
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
Output regions as a compact list of rectangles:
QRegion(2 rectangles, 50x200+100+200, 200x50+10+10)
Change-Id: I62e42bd30897a1d31b28e0cbd6afe7fa8ecf2664
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise, float numbers are formatted using a decimal comma
in German, causing huge diffs and failures.
Change-Id: Icd85a293d0564cac6be244eb0793611920d0c89c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QMetaEnum::key(n) returns the n-th key, which is not necessarily the one
of value n. For the key of value n, we want QMetaEnum::valueToKey(n).
Change-Id: Ic90fe6b1cbe84978a02fffff141bf4a06074917a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QTestLib] It is now possible to use variables of
types with an explicit operator bool in the QVERIFY macro.
Change-Id: I2685df164a616f6a065d689867daa9ea1de78e08
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library
and tests.
Task-number: QTBUG-51673
Change-Id: I552b3fe8d6e0eb7c8c7b3a3d41558e5e21904dd2
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Adapt the script to generate output for the new TeamCity format
added by fbd6acedac.
Change-Id: I9435382ec3daf80428c324c58434aa951841bf08
Reviewed-by: Borgar Øvsthus <borgar.ovsthus@fmcti.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When a QCOMPARE of values of type QColor fails, their
name will now be printed.
Task-number: QTBUG-51124
Change-Id: I76565daa338f038ea4f452e47705e638d94eaeee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
If QT_PRESERVE_TESTLIB_PATH is set, then LD_LIBRARY_PATH and
QT_PLUGIN_PATH won't be filtered out for the sub-tests started by
tst_selftest.
Change-Id: Ic43ba9b4d882ee36b2f7495b1c880f26aefd2629
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
This allows TeamCity to parse realtime test-results instead of using
post-build XML Report Processing. This does not support logging of
benchmarks.
[ChangeLog][QTest] Added a new logging mode that allow test-results to
be parsed on-the-fly when using Jetbrains TeamCity as CI-server. This
mode is enabled by using the -teamcity option on the command-line.
Change-Id: Ie730beb643043eb0f448f99abe6c0b5ac48aaf03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Otherwise write() for my python (OS X 2.7) wants strings, which is incorrect.
Change-Id: Ibd9d050646d1039ba8370d121dd25756ceffdb7a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
As these are strongly typed, they won't implicitly convert to int, so make sure
to cast explicitly.
Change-Id: Ic8daa31c528bbd8f399ab401d0963e13db191312
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Previously, only QXmlTestLogger had timers to take elapsed times
and log them. Move those into class QTestLog for access by
the loggers and output the times in the crash dump to make it
easier to spot hangs/recursion crashes.
Produces:
QFATAL : foo() Received signal 11
Function time: 22ms Total time: 23ms
A crash occurred in ...
Function time: 24ms Total time: 26ms
Task-number: QTBUG-47370
Change-Id: Ia530a63104087daffc9a15f68c15d93378b9407e
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Make it easier to capture information about crashing tests in log files,
since it is not possible to do something like
foo > log.txt 2> errlog.txt
on Windows.
Adapt selftest.
[ChangeLog][QtTest][Important Behavior Changes] Crash/exception
information is now logged to standard output on Windows.
Task-number: QTBUG-47370
Change-Id: I3e6a2d25855ed0f20516418a031990b562f5f757
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
[ChangeLog][Important Behavior Changes] QDebug output for QStrings
changed compared to Qt 5.5.0 to more closely match the output of
previous Qt versions. Like Qt 5.5.0, QDebug will escape non-printable
characters, the backslash and quote characters, but will no longer
escape the printable characters.
Task-number: QTBUG-47316
Change-Id: I52dd43c12685407bb9a6ffff13f62ef68cbc80c5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
From MSVC 2015 onwards, MSVC formats floats using printf("%g") like
g++, so the fiddling of the expected output needs to restricted
accordingly.
Change-Id: I6e7f78e5e90f70886a8b2ef37c0fb9bf82b5e1a3
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This is for example useful when looking for a possible BLACKLIST
file while doing a shadow build.
Add autotests for blacklist.
Change-Id: I41d3939d31d21d10187fefcb82604736d911b6ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Dump a stack trace on Linux if the process crashes. This will give us
much better log output in the new CI system. In addition, create a
watch dog thread, that kills the test if the test function times
out (ie. hangs)
Implementations of the stack trace dumping for Mac and Windows
are still pending.
Change-Id: I65426c5afe290a0a2019b881436a0c278f1cafaf
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Similar to what we've done to QString, only we print each byte that is
not ASCII as \OOO (octal representation).
[ChangeLog][QtTest] QtTest now prints an escaped version of
QByteArrays that failed to compare with QCOMPARE, instead of the hex
dump.
Change-Id: I6a8c43f138c66c998280998a242b43cd579666a0
Reviewed-by: Richard J. Moore <rich@kde.org>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Selftests for testlib fail when executed in UTC timezone because local and
UTC are the same, but expected to be different. A custom timezone is used
instead.
Debug output of qCompare does only handle local and non-local timezones, using
new Qt5 features allows to show the correct timezone in format string.
Change-Id: I753884a12370952b7b62a90d62896db4f2d3d1b4
Reviewed-by: Jason McDonald <macadder1@gmail.com>
[ChangeLog][QtCore][QDebug] Printing of QStrings and QStringRefs
whenever "noquote" is not active now prints the strings in a format that
can be copied back to C++ code. All characters that aren't printable in
US-ASCII are escaped (this includes printable Unicode characters outside
of US-ASCII). Pretty-printing will not respect QTextFormat padding or
field widths.
Change-Id: I169a8a0508e24693f5652f0129defe7f709e5d08
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add an 'info' message type that can be used for messages that are neither
warnings (QtWarningMsg), nor for debugging only (QtDebugMsg). This is
useful mainly for applications that do not have to adhere to the
'do not print anything by default' paradigm that we have for
the Qt libraries itself.
[ChangeLog][QtCore][Logging] QtInfoMsg got added as a new QtMsgType.
Use the new qInfo(), qCInfo() macros to log to it.
Change-Id: I810995d63de46c41a9a99a34d37c0d417fa87a05
Reviewed-by: Jason McDonald <macadder1@gmail.com>
We need to have a finer grained control over the tests
we skip in our CI system. This adds a blacklisting
mechanism that allows blacklisting individual test
functions (or even test data) using a set of predefined
matching keys for the operating system and some other
relevant variables.
QTestlib will search for a file called BLACKLIST in the test
directory and parse it if found. The file contains a simple
ini style list of functions to blacklist. For details see
qtestblacklist.cpp.
Change-Id: Id3fae4b264ca99970cbf9f45bfb85fa75c1fd823
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
GRAPHICS_ROOT and TZ environment variables are needed in child
processes in order to successfully run the auto test selftests.
Change-Id: I7befabd535b4c47b1e75acbe3d6158d0d9b811b3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Added the function pointer constructor to QSignalSpy to take advantage
of the new connect syntax.
Change-Id: I94218a096c677cdba73e1b2cfa8b9c09bc28145f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Output the file name and fix line number to be 1..n.
Change-Id: I3ba7f84b99ce3664bc3e403b230307511b15fe1f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This also has the advantage of not requiring the use of the locale
codec. Quite an advantage if you're debugging the locale codec. But it's
mostly so that we don't get question marks that hide the difference we
were trying to locate.
[ChangeLog][QtTest] QtTest now prints an escaped version of QStrings
that failed to compare with QCOMPARE. That is, instead of converting
non-printable characters to question marks, QtTest will print the
Unicode representation of the character in question.
Change-Id: I44c1ef3246b188c913dacd3ca4df02581356ea41
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is only useful for logging benchmarks, since it won't print test
passes, failures, etc. It's useful for importing to spreadsheets to do
number-crunching.
[ChangeLog][QtTest]Added a CSV logging mode that is suitable for
importing benchmark results into spreadsheets. This can be enabled by
the -csv option on the command-line. The CSV logging mode will not print
test failures, debug messages, warnings, etc.
Change-Id: I245d6f86bb380645c9bc0d748cf474b3ed42cab8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Task-number: QTBUG-35743
[ChangeLog][QtTest][Windows] Use correct UTF-8 encoding for XML test results on platforms with different console encoding.
Change-Id: Ice9d03192098f931e5dac358928e0c4421ab715e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Do not apply additional encoding when reading process output.
Fixes errors when encountering UTF-8:
Traceback (most recent call last):
File "./generate_expected_output.py", line 117, in <module>
generateTestData(path)
File "./generate_expected_output.py", line 106, in generateTestData
out.write(data.decode('utf-8'))
UnicodeEncodeError: 'ascii' codec can't encode character u'\xdc' in position 5485: ordinal not in range(128)
Change-Id: Ib827787a59a18b4d3d0601645856517f43c01fc3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Evaluate command line arguments and use directories only when empty.
Change-Id: I818ec13c686018a3f607e91174e57d8f8bbf15f7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The actual code in testlib now indents the duration tag when it is for a
function.
Change-Id: Iee62db9c81f11dc54e57f166bf9fb2b7012b7e03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
[ChangeLog][QtTest] Added test duration to xml output.
When running tests with xml output a new tag of the form
<duration msecs="123"/> is added to each test function and the test as a
whole.
Change-Id: Ibc4db066b6acf5fac6c578f5e5ca5ce4b5d8ea8e
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The units that were supposed to have variance were completely off in the
test leading to all benchmarks with slight variance being completely
flaky.
Change-Id: Ib76593813974adee462b3f03be9370d2248d770c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
This makes testlib a lot more hackable since when the output is changed
in a defined way we can regenerate the expected output (eg adding the
test duration which will be a follow-up patch).
Note that the script does not work properly on Windows and not all
benchmarks work, but at least it reduces the work of adapting files to a few lines.
Change-Id: I910387cd92ff82aa629747a3a3033dae17fbd711
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The newly added generate_expected_output.py was used to get the expected
output into a more reproducible state.
Change-Id: I1ca75c8e0c5778d25c1df531bd298007aac0ff4a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When comparing expected with actual debug messages, allow the expected
ones to contain a trailing space. This is needed to not break all
autotests in a follow up patch, which will prevent ~QDebug() from
generating a trailing space by default.
Task-number: QTBUG-15256
Change-Id: I7f67393ddfbfe37fde1ca5ef45e4ad7f4b5324b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
New macro QVERIFY_EXCEPTION_THROWN may be used to check that some code
really throws an exception of specified type.
Change-Id: I7cf499c7c37a35407862bc604c6eb862c5f329d3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Give processes a more complete environment (openSUSE
requires more variables to start an X11-process),
add test column indicating whether a test is
supposed to crash. If it is not, report crash reason.
Change-Id: I1e0ad59824963f69ee425f331d845741be2b3928
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Make it possible to match messages by a pattern.
Change-Id: I713312e86db5471755459f1ecc43e8f1ac7a95fb
Reviewed-by: Jason McDonald <macadder1@gmail.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before:
FAIL! tst_testcase::testcase: Compared values are not the same
Actual (actual): F0O
Expected (expected): FOO
Now:
FAIL! tst_testcase::testcase: Compared values are not the same
Actual (actual) : F0O
Expected (expected): FOO
Change-Id: I6f0768e4ef53e065b85a56879cecbad06fa34aef
Reviewed-by: Jason McDonald <macadder1@gmail.com>
"QTest" is the C++ namespace; "QtTest" is the library name
- Edited the logger output in qplaintestlogger.cpp
- Updated documentation
- Updated expected outputs for self-tests
Change-Id: I43c525c43221a8d4e843a00d6d55b0f06ef55fd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix float format and exclude crashing sub-binary.
Task-number: QTBUG-29014
Change-Id: I404f971edeb128263122a194f23e2806d6fd3bd0
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Only QStringList was handled before, now any QList is handled.
A specialization for QStringList is still needed though, due to the way
template matching works.
Example with QList<int>. Before:
FAIL! : tst_QTextCodec::threadSafety() Compared values are not the same
Loc: [../tst_qtextcodec.cpp(2057)]
After:
FAIL! : tst_QTextCodec::threadSafety() Compared lists differ at index 0.
Actual (res2.toList()): '0'
Expected (mibList): '3'
Loc: [../tst_qtextcodec.cpp(2057)]
Change-Id: If0fdec3236ddb78a679ee549aba569ef5571c395
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
that way we don't have to auto-generate code for that in the configures.
note that we now load qt_build_config.prf instead of just qmodule.pri,
which means that exceptions_off is set everywhere. we forcibly re-enable
them for testcases to minimize the deviation from default 3rd party usage.
testlib selftests are not qt testcases, so the one that needs exceptions
needs to enable them explicitly.
Change-Id: I1b9360bb11f2e80c92a2b63a7c45991ad17fda1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If an URL is invalid, let's indicate that in the test output. To be
helpful, let's make QUrl::errorString() include the component form of
the URL.
Change-Id: Iaafe16973ded79c7ea688fbb23808d91253e8c14
Reviewed-by: David Faure <faure@kde.org>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Previously, a QVariant parameter would be wrapped inside a new
QVariant, and you would have to cast the QSignalSpy's QVariant to
a QVariant to get the actual value. This behavior was unintuitive
and undocumented.
Check if the parameter type is QVariant, and copy it directly if it
is. This makes the QSignalSpy's QVariant directly usable (no need to
"unwrap" the value in user code).
Existing tests that use QSignalSpy together with QVariant parameters
(such as tst_QPropertyAnimation::valueChanged()) and do cast the
QVariant parameter to a QVariant, continue to work after this change;
this is because qvariant_cast<QVariant>() returns its input value
(unchanged) when the type is not QMetaType::QVariant.
Task-number: QTBUG-21645
Change-Id: Ibfb171edd60c0d3f7ca1d5419e5c5f3d0380d5b3
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The previous API was hard to use (global function, no type safety,
manual chaining), and confusing (app vs dispatcher split only made
sense on Windows). Installing and removing out of order would have
the risk of setting back a dangling pointer (crash). Meanwhile QPA
added type safety, and this new API models the QObject::installEventFilter
API for ease of use. The virtual method is in a new interface,
QAbstractNativeEventFilter.
QPA was even calling the dispatcher event filter with QPA-private event
classes, which made no sense (refactoring leftover from when the code
was in the dispatcher). Now the QPA plugins trigger the qcoreapp event
filters with the actual native events directly.
Change-Id: Ie35e47c59c862383bcaf857b28d54f7c72547882
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Future-proofing. Since Qt source code is now mandated to be in UTF-8,
it is entirely possible that someone will use non-ASCII in data tags.
Though it would be interesting to see how to access them from the
Windows command-line.
Change-Id: I880fc312432b62143888ff1e1d9abbd54f704601
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use a QTemporaryDir for temporary files, instead of the current working
directory.
Change-Id: Ifeb2944238f785a1f7beb0dc2a7c1e092d121db5
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This way, QWinEventNotifier will work on all Windows systems, not just
with the default event dispatcher. Other dispatchers (other than
QWin32EventDispatcher) are permitted, so the class should not abort just
because of that.
If a dispatcher really doesn't want to implement this, they need to
implement the virtuals to do nothing, possibly print a warning.
Change-Id: I2c132bcde95b9d5941c8906a0fcd2ad964087772
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It is an extension coming from the use case when you, for instance, need to
implement a countdown timer in client codes, and manually maintain a dedicated
variable for counting down with the help of yet another Timer. There might be
other use cases as well. The returned value is meant to be in milliseconds, as
the method documentation says, since it is reasonable, and consistent with the
rest (ie. the interval accessor).
The elapsed time is already being tracked inside the event dispatcher, thus the
effort is only exposing that for all platforms supported according to the
desired timer identifier, and propagating up to the QTimer public API. It is
done by using the QTimerInfoList class in the glib and unix dispatchers, and the
WinTimeInfo struct for the windows dispatcher.
It might be a good idea to to establish a QWinTimerInfo
(qtimerinfo_win{_p.h,cpp}) in the future for resembling the interface for
windows with the glib/unix management so that it would be consistent. That would
mean abstracting out a base class (~interface) for the timer info classes.
Something like that QAbstractTimerInfo.
Test: Build test only on (Arch)Linux, Windows and Mac. I have also run the unit
tests and they passed as well.
Change-Id: Ie37b3aff909313ebc92e511e27d029abb070f110
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Callers should just call the standard allocation functions directly.
Adding an extra function call onto all basic memory management for the sake of
making it instrumentable in rare cases isn't really fair to everyone else.
What's more, this wasn't completely reliable, as not everything was using them
in a number of places. Memory management can still be overridden using tricks
like LD_PRELOAD if needed.
Their aligned equivilents cannot be deprecated, as no standard equivilents
exist, although investigation into posix_memalign(3) is a possibility
for the future.
Change-Id: Ic5f74b14be33f8bc188fe7236c55e15c36a23fc7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make the various versions of the failure message align consistently so
that it's a little easier to compare the actual and expected values. Of
course, the value won't align nicely unless the "actual" and "expected"
strings are the same length, but at least this commit makes that
consistent across all versions of the message.
Change-Id: If9ce231df3b5d279a06f6458fdb5da0aa4586068
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If the expected output file was missing (e.g. not included in
selftests.qrc), tst_selftests would trigger an assert inside QList by
calling QList::at() on an empty list. Make tst_selftests detect this
error instead and give a meaningful error message.
When loading expected output for the crashes selftest, where there are
several alternative versions of the expected output, the code reused the
"exp" variable when loading the alternative test output files. This
caused the last file loaded to be used unintentionally if none of the
alternative files had the correct number of lines. Use a different
variable so that exp remains empty if none of the alternatives are
valid and a failure can be reported.
Change-Id: I35b2a3d905d069d3ee8dcb1447836eb68d5c8612
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, verbose (-v2) and XPASS test output showed all QCOMPAREs as
"COMPARE()", making it impossible to see what was compared and difficult
to match the output to the source of a test containing many calls to
QCOMPARE.
This commit changes testlib's internal compare_helper API so that string
representations of the compared expressions are always passed to
QTestResult::compare() when available, and can thus be shown in the
verbose and XPASS output. The XPASS output has also been changed to
state explicitly that the comparison succeeded unexpectedly, bringing it
in line with the XPASS output resulting from a call to QVERIFY.
This commit also changes all calls to compare_helper() to call the
eight-argument version of the function, which simplifies much of the
calling code. The now obsolete four-argument version of
compare_helper() has been changed to output a warning that it is
obsolete. It will be removed once other modules have had some time to
catch up.
The improved XPASS and verbose output is demonstrated by the expectfail
and verbose2 selftests.
Change-Id: I8baa46d5dd30e6c43b26f366c34dc5b64aab5f7c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The verbose output for QCOMPARE is not very helpful. Make the verbose2
selftest (which reuses the counting selftest) demonstrate this, so that
a future commit can demonstrate improvement.
Change-Id: I6b3bc8f5199e984aa11d0a67b76a8c916be86380
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These tests don't have their own source code but rather reuse the
counting selftest with additional command-line options.
Note that currently the -v1 switch only changes the plain text output,
and the expected xml output is identical to that of the counting test.
This may change in the future however.
This commit also restores a couple of lists to alphabetical order, where
the findtestdata selftest was not sorted into the list correctly.
Change-Id: Ie38e255f8029157b34162b3864b5fa66e137d74a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Do this regardless of whether the event subclass
is public API or only used in examples. Examples
are examples, used by others as templates or even
copied verbatim, so they should also follow sound
engineering rules.
Anyway, there's only one in examples/...
Change-Id: I586ff16407a956c9e89288fdd4377eed73f45c0f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The private git history shows that the test program associated with this
data file was missing from the original commit and was never
subsequently added.
Change-Id: I3401724ac04168158a48eb06436db83d3557711f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously the silent logging mode suppressed passes, skips and internal
testlib info messages, but did not suppress debugging output, making it
hard to see the fails in a noisy test. This commit changes silent mode
so that it suppresses all output except test failures and fatal errors,
making silent mode truly useful for seeing just the important test
output.
This commit also adds a selftest to verify the behaviour of silent mode.
Change-Id: I75420aead03682306210746a87e2a3b608b58fc6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The meta-object format is going to change for Qt5. Use QMOB to
insulate the badxml test from such changes.
(It just so happens that the QFAIL("a failure") statement is still on
line 109 after the refactoring, so the expected_badxml.* files'
location tags did not have to be changed.)
Change-Id: I04421d13c4df71c8004fa71cafc4823a59079a41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Prior to this commit, a benchmark test could report 0..n passes and 0..m
fails or skips, where n is the number of accumulation iterations used to
collect benchmark data and m is the number of times the test function
was invoked. Depending on the type of benchmark measurer being used,
this could result in a very large volume of test output and inconsistent
pass, fail and skip counts between test runs.
This commit changes the behaviour so that each benchmark test reports
one pass, fail or skip, regardless of the number of iterations used to
collect benchmark data.
This commit also prevents benchmark data being reported in the test
output if the benchmark test failed or skipped, as any benchmark data is
of dubious value in such cases.
The latter change in behaviour requires a minor modification to the
badxml selftest, which now tests quoting of literal strings in xml test
output for both passing and failing benchmarks.
Finally, this commit also adds a new selftest specifically for verifying
correct behaviour for benchmarks that fail or skip.
Task-number: QTBUG-24313
Change-Id: I3426dc659a7511b62fd183a031c7235bc753f497
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Prior to this commit, when an unexpected pass occurred the test output
showed the message "XPASS : tst_foo::function() 'expr' returned FALSE",
where the problem was actually that the expression evaluated to true
when it was expected to be false.
This commit changes the output to make it clear that the expression
evaluated to true unexpectedly.
Task-number: QTBUG-22118
Change-Id: Id22c178073d3b75789675ca37a8ef019029b1f91
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Prior to this commit, the following statement in the qtestlib
documentation was untrue: "If init() fails, the following testfunction
will not be executed, the test will proceed to the next testfunction."
If init() called QSKIP, the test function would be skipped, but if
init() reported a failure, the test function would still be executed
(even though doing so could be unsafe).
This commit makes testlib skip a test function if init() reports a
failure and enhances the selftests to cover skips and fails in both
init() and cleanup().
Task-number: QTBUG-20371
Change-Id: Id1cc8464ae0b8c257ae1b74dbe9189a501f5366b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For data-driven tests, testlib previously counted one fail or skip for
each data row that failed or skipped, while it counted only one pass
for a test function where all rows passed and counted no passes for a
test function where some rows passed and some rows failed. A similar
problem also existed for benchmark tests, which could run multiple
iterations of the same test, with each fail and skip being counted but
only a single pass being counted for the entire series of iterations.
This commit makes testlib count one pass, fail or skip for each data
row. Test functions that are not data-driven count one result for the
test function, as before. Benchmark tests count one pass, fail or skip
per iteration.
A side-effect of this change is that the test output in plain text, xml
and light xml formats now shows a result for every data row and
benchmark iteration executed, allowing post-processors to correctly
calculate the total number of tests executed. Previously, individual
rows were not shown in the test output if they passed, making such
calculations impossible.
The only change to the xunitxml output format is to correct a bug where
no test result was recorded for a test function if the last data row
was skipped and all other rows passed -- in which case the overall
result should be a pass. Note that there is also a pre-existing bug
in the xunit logger, where no result is reported if all rows are
skipped; that bug is unaffected by this commit.
Task-number: QTBUG-21848
Task-number: QTBUG-22124
Change-Id: I7e17177e10d6e89e55b9684c159bd506f21d002b
Reviewed-by: Ed Baak <ed.baak@nokia.com>
Set QT_TESTCOCOON_ACTIVE environment variable when the coverage is installed
for a test and unset it when the coverage data is saved. Tests that run when
QT_TESTCOCOON_ACTIVE is set are subtests and will not be considered as
stand-alone tests for the coverage.
When a test is run as a subtest its coverage data will not be saved for
itself but for the main test it is merged with. Also its status will not be
reported since only the status of the main test is expected in the test report,
e.g. the test tests/auto/testlib/selftests.
Change-Id: Icfdf99300aae18040e1a3441a8af21f68df4c0db
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Correct a bug in the test and use unique names for data rows. The bug
was that the test assumed that QCOMPARE for float values 100001 and
100002 would fail, but it actually succeeds. QCOMPARE for floats uses
qFuzzyCompare(), which succeeds if the numbers differ by no more than
1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes,
while QCOMPARE(99998, 99999) fails.
Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of the subtests are only run with plain-text output format. For
those subtests, the other output formats were unused and gradually
becoming out-of-date.
Change-Id: I4c10f7f5bab2d2cc7d2d2ad641fbf5d4df02b798
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Our OSX 10.7 test machines send a SIGILL rather than a SIGSEGV to a
process which attempts to dereference a null pointer.
Change the "crashes" test to dereference an invalid pointer with a
value slightly greater than 0 so that we get the same crash behavior on
all (unix) platforms.
Change-Id: I700a2c7d654a9468af5e5996010a258695ed2ae5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Previously, ignored messages were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data row in a data-driven test function didn't cause all of the expected
messages to be generated, the remaining messages would be carried over
to the next data row. This would result in errors about missing
messages being associated with the last data row rather than with the
correct data row.
This commit makes testlib check for missing ignored messages after
running each data row rather than only doing so after the last data
row.
This commit also adds a regression test to demonstrate that ignored
messages can no longer be carried over from one data row to another.
Change-Id: Ibee51aa6e96866fbcbcb4acee1a8340a86a6a4ba
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, expected failures were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data-driven test function called QEXPECT_FAIL and then didn't perform
any further verification steps to trigger the expected failure, the
expected failure would be carried over to the next data row, probably
causing the first verification step in the test function to XPASS (with
a seemingly irrelevant error message) for the next data row.
This commit adds the new function QTestResult::finishedCurrentTestData()
to cleanup after each data row is executed. This function treats calls
to QEXPECT_FAIL without subsequent verification steps as a test failure.
This commit also adds a regression test to demonstrate that expected
failures can no longer be carried over from one data row to another. If
run against the previous version of testlib, the new test would report a
pass instead of an error.
Change-Id: Ida5c7f080815b0dca9531131fed582b0918334cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Needed to add toLower() for compare as c:\ and C:\ was causing
a failure.
Change-Id: Idd55774d118b7249e88362688166b4f9d9712c7c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Rename some of the test functions to improve consistency, and change the
order so that all the xfail tests are together (some new xpass tests
will be added later).
Change-Id: Ice1ac5bf61bc26109bb0d08f72eb74e1a0424101
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test simply generates each possible pair of Pass, Fail and Skip
results. At present the test simply serves to demonstrate the current
shortcomings of testlib's plain text logging, namely:
* If a test function passes for all data rows, that is counted as one
pass, but each skipped or failed row counts as one skip or fail.
* Only skipped and failed rows are reported individually in the test
output. Passed rows are not reported, so it is impossible to see how
many rows were executed.
* A skip followed by a pass will be reported as an overall pass for the
test function, but the same rows in reverse order will not report any
overall result for the test function.
Future commits will attempt to correct these problems.
Task-number: QTBUG-22124
Change-Id: If8c7ea15fc43ba9a1bccd0e881c1efc18e705b25
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add a test case for calling QEXPECT_FAIL in a data-driven test without
passing a specific data tag for the expected failure, in which the
expected failure should apply to the current data row.
Change-Id: I70a6592de77b1718c3a749fd2216e66f8f312805
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add a test for the case where a call to QEXPECT_FAIL nominates a
different data row from the current row, in which case the call to
QEXPECT_FAIL should be ignored.
Change-Id: Iff774b89f9374fa26105acdd8769177272a95229
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add a test for the case where QEXPECT_FAIL is called twice in a row
without an intervening verification step, which is supposed to result in
a failure.
Change-Id: Ie004652a76a2c35c2679945670ff5561e8f5b62e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make the test fail if calling QEXPECT_FAIL with the mode set to Abort
does not cause the current test function to abort. Previously, such an
error would not cause the selftest to fail and someone would have to see
the warning message in the test output to know that there is a problem.
Change-Id: I2bd58fafe6b51ea0ab86fde7c5afb781e4534ee4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The existing expectfail selftest did not test QEXPECT_FAIL with a
data-driven test function. This commit adds such a test.
Change-Id: I39fa9aa227b58779ce5268dd37bf55468e7269c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test relies on being able to set a custom QLibraryInfo::PrefixPath
for the duration of the test. However, the test code neglected to
account for the following behavior on mac (from "Using qt.conf"
documentation):
On Mac OS X, the Prefix is relative to the Contents in the application
bundle.
Change-Id: Ie9b6d5ebfe8af7d7f332e827069b60a830d6c6f2
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to detect valgrind at runtime and skip test instead of failing.
- subprograms inherit QT_QPA_PLATFORM value from parent if set.
Change-Id: I280acee389df1ee74ee6758a0dd1601226e103c7
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- All subprograms installed as part of test instead of separate installs
- Added installTestHelperApp() to testcase.prf
Change-Id: I02fbbb299f095054c9216ad0e5f91f574fb0fe3d
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Changed selftests unittest to use specific classes of QtCore instead of
pulling in all of QtCore headers by using include <QtCore>
- Decreasing build time.
Change-Id: Ic53a70423ecafeb342cc05ae6d7dee795533d205
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Changed these tests to use QFINDTESTDATA macro to detect location of testdata.
Checking for a specific file contained in the testdata so as not to be confused by empty directories
created during configure.
Change-Id: Iac2ac6304b6b9ac79e00886025b93ec0af5a8507
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
