When setting a new window state. Otherwise we set the geometry based on
the old screen properties, and then rely on the properties causing
another window layout, which may not always happen. We also need to
explicitly update the screen properties when the statusbar changes
visibility, as there are no callbacks from iOS that consistently gives
us that information.
Change-Id: I1c3328aa3f34d294bc7db8884e611d205fd2c761
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
A window that was resized to the full screen size of the screen would
otherwise always stay in full screen, even if the window state was
maximized.
Change-Id: I4720f7b6ad1d85658ea96c6da0515693e8c827f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
QtWidgets uses stale geometry data to do its backingstore resizes in a
lot of places, eg QWidgetPrivate::setGeometry_sys() and show_sys(). As
the resize doesn't have any effect for our GL backingstore anyways
we can skip the warning to keep console noise down.
Change-Id: Ie578f7faf35985708fddd0bfca4a7080820192c5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It's only available on iPhone/iPods.
Change-Id: I61b45c84ddb2b3db46fff36286a6582406fa7d26
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This reverts commit 98f0b46689.
The native menu popup would never exit its event loop, because
there's no listener for the closing of the menu. Since this is very
last minute and the change is not ready, we revert it and use
the widget menus instead.
Change-Id: Ie9ae707300a265130a90d1ccb5f093f50cc0b2fb
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
First batch of changes applied to src/widgets since v5.1.0.
Change-Id: I23515e8dd340f8551d1681d0abeb2cbbff3683d7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When iOS transfers focus from one view to another, it
asks the new view for its UIKeyInput properties before
deciding how the keyboard should be configured.
For Qt, the same QUIView is used for the whole QWindow
which means that UIKit will not change the keyboard
configuration just because we change the focus object
in Qt, since the UIView does not change.
There seems to be no way to tell UIKit that the
keyboard needs to change becuse the UIKeyInput
properties has changed. To work around this, we
briefly resign first responder status, and grabs it
again, for the same QUIView.
Change-Id: I2d15cc0c928deb023e7da58ad4669b7099dce2cf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Configure QUIView text input traits from IM hints
returned by the focus object when the view becomes
first responder. This will affect the layout of the
virtual keyboard.
Change-Id: Ib140ba69d01cc747f3ac3cdd70dd2e7daede26b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
CGRect and CGPoint consist of CGFloat variables. So
we should convert to QRectF and QPointF rather than
QRect and QPoint.
Change-Id: I76f180e4064f54d5810c49b88fdbbcd914bdb686
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
If the inputItem moves, it typically means that the user
scrolls or flicks the focus item around. In that case
we should avoid scrolling the screen, otherwise they
will "cancel out" each other. Besides, when the user
flicks, he takes control over the whereabouts
on the screen anyway.
Change-Id: Iad0762965f9dcdbcca934ce6d90a8c1413ce3ca2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This change will let QIOSInputContext scroll the root
view when the virtual keyboard is open, so that the input cursor
is not obscured.
Change-Id: If0758f4bf04c2b8e554e0196451154def7e3cb86
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The QtGraphicalEffects module is a QtQuick2 only module so it is clear
why it was left out before iOS had support for QtQuick2, but now it
should be built by default. This commit removes QtGraphicalEffects from
the iOS module "skip list".
Change-Id: Ie0890f6784ad6e276e80bf7a11195c141ca23332
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The QtQuickControls is supported for 5.2 though it does not provide
the system native "look and feel". This patch removes the module from
the iOS module "skip list".
Task-number: QTBUG-35033
Change-Id: Icad479f2e4651c02e569e8a86cfe5ac912d8ed10
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QtMultimedia is supported in Qt 5.2 and should be built by default, so
it has been removed from the module "skip list"
Task-number: QTBUG-35039
Change-Id: Id43f997251bf392b7f6c0166ee06b7364ce30b8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Qml has a bunch of hooks in QObject, that are callbacks as function pointers
when things happen in QObject. QtDeclarative (Qml1) only needs one callback,
for object destruction. In preparation for allowing both run-times to co-exist,
this patch forks the callback, keeping the "default" variant for QtQml and
having a *_qml1 variant for QtDeclarative. QtQml continues to set the callback
variable for the default and QtDeclarative will set the _qml1 variant.
It is however a limitation that a QObject instance can only be exposed to _one_
engine at a time, and it is not possible to make a transfer. Double exposure
will result in crashes.
This patch alone is not sufficient to fix the bug, the
QQmlData/QDeclarativeData structures in Qml1 and Qml2 need to be extended to
allow distinction at run-time.
Task-number: QTBUG-35006
Change-Id: I3bac023873b5656a8a4f117fe816bafcda77b67d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QString::replace() has no way of escaping capture group references,
so simply disarm double backslashes. of course this is broken, but
we'd need to reimplement it from scratch to fix it properly. "corner
case" ...
Change-Id: I357fbfd22c9c4a68809e5af6efad1de3a95706b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Certain key sequences (like press alt, press left, release left,
release alt) can cause an assert in qwindowskeymapper. This
behavior was introduced in change
I4f7709a90906b03f4504deea1ff5c361e9f94b3f (Fix virtual key
mapping on MS Windows). The place that seems to cause the new
behavior is changing the bitmask for obtaining the event's scancode.
With the changed bitmask releasing the alt key in the given
key sequence causes the WM_KEYUP event to trigger a WM_CHAR event
which should not happen there. To be honest I don't know how having
the extended bit inside the scancode fixes the behavior but it seems
to do and I could not find another place which might cause the
breakage.
Task-number: QTBUG-35005
Change-Id: Ia18c2681ea311196441a5cd15017e220ac095674
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
There is no real printing support though, it just prepares
the land for bringing printing support for API-19+.
Change-Id: Iabf78499f8fe1e4d2527e339cee5746acb8f3b3f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Plain QNX 6.5.0 does not have a libpps, the new QNX
has a libpps and BlackBerry has it as well. So we need
a configure check to not open another mkspec for this
platform. This fixes the plain QNX 6.5.0 build.
Change-Id: Id4b3876f2385bcb5f3df426945532e7e26133f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
In QNX 6.6, libclipboard isn't part of the base SDP, and QT_NO_CLIPBOARD
is set unconditionally on plain QNX anyway. The clipboard-based implementation
isn't compiled when QT_NO_CLIPBOARD is set, so only try to link libclipboard
when actually building with clipboard support (BB10).
Change-Id: I54eb4fadb6bf239a83884796f5758cb79a5677ef
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Alan Alpert (Personal) <416365416c@gmail.com>
The previous patch removed a call to setGeometry, and now only calls
setGeometryHelper. This means the screen window will be resized, but
Qt won't know about our new window size. The scene graph of a QtQuick2
application would layout and render to the wrong target size.
Fixed by adding a call to QWindowSystemInterface::handleGeometryChange
if we decide to use a different geometry than suggested by the window.
Task-number: QTBUG-34930
Change-Id: Ie91c2edc45c47f5bf1d45aed981b969fcc3f40dd
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Change Ia8ef48f3 introduced a regression: Trying to paint onto a
QImage, QPicture or QPrinter from outside the main thread incorrectly
shows a warning saying that it is not supported.
The patch was incorrect because 'extraCondition' was used in the
non-default branches of the switch and thus not passing
extraCondition==true caused the message appear even when it shouldn't
have.
Let's just remove the extraCondition parameter altogether since it is
not used in practice anyway.
Change-Id: Id2e56c585d1f1013f24942cbcd53305fbb66aeba
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Having it disabled caused issues with our backing-store implementation,
which assumes that the backing store is retained, but for us is backed
by a GL context.
Change-Id: I18d05e226c7cf949adcd3b71801ffd845fa6d83d
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
QWidget::show_sys() assumes synchronous geometry behavior by trying to
resize both the platform window and the backing store if the widget's
view of what the geometry is doesn't match the platform window's.
The problem with that is that it's the widget which is not up to date,
not the window, as the widget is not waiting for resize events before
applying any resize logic. Instead of trying to fix widgets, we throw
our hands in the air and give QtWidgets the synchronous behavior it
assumes from the platform.
Change-Id: I1b9241b9b13df661dc7f41c4cb8ecd02f5572256
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The QBackingStore API doesn't require clients to precede flush() with a
beginPaint() call, but our backingstore is backed by a GL context, so
it's up to us to ensure it's current before swapping.
Change-Id: Ia6119bf0e835448b1fd383d933df6f88fa4f298a
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QSysInfo::MacintoshVersion is initialized before the main thread's release
pool has been set up, so we have to wrap the UIKit usage in our own pool.
Change-Id: I80e2c068339e0251f38ecf55fcfb764594eb3ad7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Matches the Android behavior, and gives an easy and predictable way to
show true fullscreen windows that is similar to how one would do it on
a desktop platform.
We keep the statusbar visibility in sync with the window state of the
active window.
Change-Id: Ia4b99e03f83e19f9ef56cc99b9d477cc6da4c734
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
When setting the geometry on our UIView, or when reporting it back to Qt
in our layoutSubviews callback, we need to take into account that the
root viewcontroller may be not be positioned at 0,0 in the screen's
window. Even when using the wantsFullScreenLayout property of the view
controller this may be the case on iOS7 when the in-call status-bar is
visible.
Change-Id: I0ca706c1c9aff8ba4f3b4ccdf83dba713bd5c9c2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Geometry changes may come from Qt itself, or spontaneously from the windowing
system. In both cases we deal with them through the layoutSubviews callback,
which we now ensure gets called after we set a new geometry on the UIView
frame, by using the setNeedsLayout message.
We take care to persist the requested geometry from Qt immediately in our
setGeometry() function, so that subsequent calls to QWindow::geometry()
will report back the requested geometry. Clients can however not rely
on this geometry until they've received a corresponding resize event,
which we trigger from layoutSubviews.
Since the new geometry reported in layoutSubviews may be different from
what the user requested, we ensure to pass on both the new and the "old"
geometry, so that Qt will send the appropriate resize and move events.
Instead of building expose events on top of the existing layout
mechanism provided by iOS, we hook into the more logical point,
which is the display-phase. Since a EAGL view normally doesn't
need to "display" anything this takes a few overrides on UIView.
Once we have the hooks we need, we can distinguish between a QWindow
backing needing layout, and needing displaying.
Finally, we flush both the resize and expose events, as that's what
iOS expects of us when asking us to layout or display. The result
is that Qt is able to synchronously resize subwindows and prepare
new GL rendering for the next frame.
Change-Id: I4c03e3db3fe886163284ba1a342699e217e88cbb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Allows us to skip passing __MAC_NA and __IPHONE_NA when we don't care
about that platform.
Change-Id: Ie265beb457d057de06ae64970684d67e59062b1c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default font size turned out to be slightly too small for
comfort on touch devices. This tweaks the size from a 12-point equivalent
to a 14-point equivalent. (Point sizes aren't real point sizes because of
compatibility with iOS.)
Change-Id: I6d970fdd5bba8199cabdf1aaaaac10d19c53c654
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
If the two QObjecs are connected and destroyed at the same time, it
is possible to hit a case where QObject::metaObject and QObject::disconnectNotify
is called on a destroyed object.
This patch moves the calls up before the removal of the connection. This
ensure the sender object will have to block on the receivers connection
mutex and can not finish destruction before disconnectNotify is called.
Task-number: QTBUG-34131
Change-Id: I398116fe7bc6a195991aff9961d89a8b0ac8d53c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
After introducing support for QSysInfo::macVersion() for iOS we need
clients to link to UIKit when using QtCore, as that's where the UIDevice
class lives.
Change-Id: I0a9c2e2506c61ac5619fd000ebd10c2ab9e037cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix ICU compile test for MinGW by adding the INCLUDE and LIB environment
variables to the compiler flags. The logic is the same as in qmodule.pri.
Task-number: QTBUG-34971
Change-Id: I192e06643517087587ec4a5dffe4698c2078011a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt::WA_Mapped maps (sic) to windowHandle()->isExposed(), and we set/update
it in QWidgetWindow::handleExposeEvent(). Setting it directly in show_sys
shortcuts QPA and assumes showing a window is synchronous on all platforms,
resulting in trying to flush the widget backingstore when the window was
not exposed yet (due to discardSyncRequest starting to return false).
This reverts commit 829b1d13b2.
Change-Id: I0bd700d4939bc69ba184d8586435b68ec3dd72fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Some of the examples that where tagged with "android" are no longer
supported (e.g., video widget), others just don't work.
This patch replaces those that have equivalent examples that are known
to work, plus some new ones that where missing (Camera, AndroidExtras
and AudioOutput).
Change-Id: I9173ab31d0ef0b55613fd5342e7d2e6d95d4d980
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This fixes a regression introduced by
be405c86f8.
Task-number: QTBUG-34988
Change-Id: Id825b51d4d94826819d2405bb711886db3db8bc8
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Since we guard against overriding the geometry in setGeometry() when a window
has a window state, we need to use a custom method to lay out windows that
calls applyGeometry() instead.
Change-Id: I6508e6aac6746c024a6172f709b8339b35b40994
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
