Starting with CMake 3.18, there is PCH support for darwin multi-arch
builds, like iOS simulator_and_device builds.
Also enable PCH for Objective-C++ files when the support is there.
To enable PCH for Objective-C++, we need to do enable the OBJCXX
language as well, but conditionally, because on non-darwin platforms
the language is probably not available.
Introduce the qt_enable_cmake_languages() macro which is called
automatically by qt_build_repo_begin().
Change-Id: I0e7f44be6577ac54ce940470036626409920e272
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before this patch there were a few ways to build tests
- Configure all tests as part of the repo build
- Configure all tests as part of the repo build, but don't build
tests by default (-DQT_NO_MAKE_TESTS=ON)
- Configure all tests as a standalone project in a separate build
dir using -QT_BUILD_STANDALONE_TESTS=ON
All of the above incur some time overhead due to the necessity
of configuring all tests.
Sometimes you just want to build ONE test (or a few).
To facilitate that use case, a new shell script called
bin/qt-cmake-standalone-test(.bat) can now be used to configure
and build one or more tests.
The script takes one single argument pointing to the desired test
project path and configures a generic template project that sets up
all the necessary Qt CMake private API, afterwards calling
add_subdirectory on the passed in project.
Example
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon
or
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image
After that, simply run 'ninja && ctest' to build and run the test(s).
This is the CMake equivalent of calling qmake on a test .pro file
(or on a tests SUBDIRS .pro file)
There are 3 details worth mentioning.
Due to the add_subdirectory call, the built artifacts will not
be in the top-level build dir, but rather in a nested build_dir.
The script currently can't handle more than one argument
(the path to the project), so you can't pass additional
-DFoo=bar arguments.
If a test uses a 3rd party library (like Threads::Threads)
which was not a public dependency for any of the Qt modules,
configuration will fail saying that the target was not found.
Perhaps we should consider recording these packages when
generating the StandaloneConfig.cmake files.
Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously you could use either module-specific or
repo-specific 'docs' targets.
For example 'ninja html_docs_qtbase' or 'ninja html_docs_Core'.
Now there's a global / top-level target called
'docs', so 'ninja docs' works.
For super builds it will build the documentation of all
configured repositories.
For a single repo build, it's equivalent to calling
'ninja docs_repo_name'.
Also for consistency, add the "docs_Core" target, which was missing
before. So now a 'docs' target exsits for repo names AND targets.
New global target names are
- docs
- prepare_docs
- generate_docs
- html_docs
- qch_docs
- install_html_docs_docs
- install_qch_docs_docs
- install_docs_docs
Amends 0095ff4e06
Change-Id: I686be1e0962e40cbce860e8ac2cabb056b360ac2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Teaches configurejson2cmake about summaries / reports, so things
like enabled features, configure sections, notes, etc.
Add relevant CMake API for adding summary sections and entries,
as well as configure reports. The commands record the passed data,
and the data is later evaluated when the summary needs to be printed.
This is needed, to ensure that all features are evaluated by the
time the summary is printed.
Some report and summary entries are not generated if they mention a
feature that is explicitly exclduded by configurejson2cmake's feature
mapping dictionary. This is to prevent CMake from failing at configure
time when trying to evaluate an unknown feature. We should re-enable
these in the future.
A few custom report types are skipped by configurejson2cmake (like
values of qmake CONFIG or buildParts).
These will have to be addressed a case-by-case basis if still needed.
Change-Id: I95d74ce34734d347681905f15a781f64b5bd5edc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before the patch we set the standard flags in two places:
- once when building qtbase
- and always when including QtSetup (for every repo that is built)
This change makes sure to also set the correct standards flag when
building standalone tests, because QtSetup is called to early in
that case.
Change-Id: Iad130b731e9eb9605bb91637364c33fdd49ce3cb
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
Adds custom targets which take care of generating and installing
documentation files.
Every module has a global set of targets suffixed with the module
name in order for them to be unique when we implement super builds.
The targets are the same as the list below, but replace ${target}
with the module's name. Eg.: docs_qtbase.
For every target which has an qt_add_docs() call, we now create the
following set of custom targets:
* docs_${target}
* html_docs_${target}
* qch_docs_${target}
* prepare_docs_${target}
* generate_docs_${target}
* install_docs_${target}
* install_html_docs_${target}
* install_qch_docs_${target}
Fixes: QTBUG-75859
Change-Id: Ie84cb9a2dedbe7333d9a84f4d73383442deca477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some repos like qtimageformats don't generate a config file for
standalone tests because the repo creates no modules.
Amends de3a806def
Change-Id: Id42338804605a883f975feb5dd81eda5acc6e687
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A developer can pass either -DQT_NO_MAKE_TESTS=ON or
-DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built
as part the default make target (when you write just make or ninja).
With ninja, tests and examples can be built separately one by one,
by typing
$ ninja tst_foo
or
$ ninja example_bar
Same can be done with the Makefile generator.
$ make tst_foo
All tests / examples can be built in one go by typing
$ ninja tests/all
or
$ ninja examples/all
With the Makefile generator unfortunately it's not as nice and is most
likely an implementation detail, but it can still be done by running
something like
$ make -f CMakeFiles/Makefile2 tests/all
or
$ make -f CMakeFiles/Makefile2 examples/all
Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Convert benchmark executables to add_qt_benchmark().
Currently add_qt_benchmark just calls add_qt_executable() and
ensures that it they build under CMAKE_CURRENT_BUILD_DIR and do not
install.
Add QT_BUILD_BENCHMARKS option to enable/disable building of benchmarks.
Change-Id: Id0bc676698d21d50048d97d9abef51d92ccb6638
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed because the ported over requires() clauses from qmake
to CMake are executed before qt_repo_build(), which means that all the
custom platform variables that we set (like LINUX, APPLE_OSX) need
to be available immediately after finding BuildInternals.
Change-Id: I7345b69edf72c266508846766e64f42c99862d1d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is useful for providing private CMake API which is not part of
QtBase. Also, fix the setup files to be included when building
standalone tests. The old ${PROJECT_NAME}Setup.cmake file inclusion will
be removed once all usages are adjusted.
Prompted-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I5bc2bca7371660c00b0301e94d025a29b68d6975
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To build examples as part of a non-installed Qt prefix build,
not-yet-installed Config files need to be found by find_package()
calls inside example projects.
Facilitate that by propagating the CMAKE_PREFIX_PATH and
QT_EXAMPLES_CMAKE_PREFIX_PATH paths in all relevant find_package()
calls where NO_DEFAULT_PATH is used.
Also adjust the inclusion of the QtFeature.cmake file to be relative
to the qt6 directory, rather than the current list directory.
This is needed to successfully find the file when parsing a Config
file from a non-installed build directory.
Change-Id: I36031279628f1f7741d8f4d7571484a6545227f7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Otherwise we get errors like the following in non-gui projects:
Error evaluating generator expression:
$<TARGET_FILE:Qt6::uic>
No target "Qt6::uic"
Change-Id: I8a3a6f8ec5e5c1c3d1f73369c5739a321c64bfbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is similar to how we show the instructions when configuring
in qmake land.
Change-Id: Iabd28acc3d74fd0175eab812a412744dac89e6f6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is similar to qmake, where the .prf files from the source
location of qtbase/mkspecs are used in a non-prefix build.
This means that if a developer changes the source QtBuild.cmake,
and then runs make in qtdeclarative, cmake will reconfigure
qtdeclarative because the timestamp of QtBuild.cmake changed.
Before this change you first had to make && make install in the
qtbase build directory, before qtdeclarative saw the modified
QtBuild.cmake.
This change also makes the module paths be prepended to
CMAKE_MODULE_PATH instead of appended, which means they will
take precedence to any path provided via command line.
Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do not build examples in static builds as they are not prepared
for this configuration.
Change-Id: Ia0fd0a6cdfa3733bf13eb2ca8398668f26c0bedf
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Perform the test whether tools should be built before entering the
source directory of a project. In QtDeclarative this would result in
a configuration error since the tools are used while building everything
under src.
Change-Id: I33ce2cb317ef221836d696654f3bb4e39db47e54
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt
tool. This will ensure all the right plugins and dependencies are
packaged when generating the apk.
This change also changes the visibility for executable to default/public.
Not having this will cause the application to crash as we can't locate
main() in the executable (shared library).
Additionally pro2cmake conversion script has been updated to perform
the required conversions for the Android settings.
Finally, the 6 projects in QtBase that have Android dependencies have
been updated with the new script and the step that produces the xml
files in run at the end in QtPostProcess.cmake.
Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
in qt_build_repo().
This is important for qtdeclarative for example, which builds QmlTest
functionality in ./src, and thus needs Test lib to be available.
Change-Id: I84326d79844526f2f177c19de30bab0c858773e3
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of doing it just in qtbase/src, we need to do it
for all repos before building ./src.
Change-Id: I57f226b849cd5370ffbbbea8a694697d400957a4
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed for qtdeclarative, to automatically start building
the tools if needed.
Change-Id: I3cbe129e8bb6fa8572a8e34fd3653b51727cb244
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Added qt_examples_begin() and qt_examples_end() macros to setup the
example list so it can be re-used in other projects.
When cross-compiling, we also need to set
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH in order for find_package()
to work correctly.
Removed support for building the whole qtbase/examples folder as a
standalone project. Building examples is only supported when building
the whole of qtbase (qtbase + examples together) or each individual
example is built separately against an installed Qt version.
Change-Id: I9d26b94b48b95af230b76ab618becb21d2d45581
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is meant to keep repo specific functions and macros that should
not pollute QtSetup.cmake. For example QtDeclarativeSetup.cmake
will automatically be included when building qtdeclarative.
Change-Id: I4d26cbb1a7ffafb153a888fc918af337000d5e41
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Check for the existence of CMakeLists.txt files before trying
to call add_subdirectory on examples, tests and src folders.
Change-Id: I7be76de5f7520c1dd181c610fd1dc2200ac74672
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Implement some aspects of qt_parts.prf to simplify the top-level
CMakeLists.txt for repositories that follow the common qt structure
(src, tools, tests, examples).
Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some qt modules need to find 3rd party packages for which there
are no Config files. We need to write custom CMake Find modules to
find those packages. These find modules need to be installed so that
they are used when a user consumes the Qt packages.
Automatically include and install these find modules if they exist,
as part of qt_build_repo_end().
Change-Id: I14aad35ed2999cac8bdda65ca4aeaf74d04fdb71
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
To implement this, create a new Qt5BuildInternals package.
All child Qt modules like qtsvg should use
find_package(Qt5BuildInternals) or
find_package(Qt5 COMPONENTS BuildInternals) in the their
top level CMakeLists.txt.
This will make the qt_build_repo() macros available.
For qtbase we slightly cheat, and specify a CMAKE_PREFIX_PATH
pointing to the source folder that contains the BuildInternals
package.
For the other modules we actually use a configured and installed
package Config file.
This change moves variables that used to be written into the
QtCore Config file into the BuildInternals package. This way
things that are relevant only for building additional Qt modules
does not pollute the QtCore package.
Task-number: QTBUG-75580
Change-Id: I5479adff2f7903c9c2862d28c05c7f485ce3e4eb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
