instead, the only relevant defines from qconfig.h (QT_VERSION*) are
passed on the command line, like we already did for qmake and
configure.exe.
this enables us to remove the early forwarding header generation from
qtbase.pro, and rely wholly on the regular mechanism from syncqt +
qt_module_headers.prf.
another advantage is that we can be sure that the bootstrapped namespace
is not polluted by the target feature configuration.
Change-Id: If29285cfc697ae56b591e2ff1a2114686d18fb30
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this wasn't possible when these headers were still generated by syncqt,
as the targets may have been still missing at that time. however, as we
do that now with qmake, forwarding the timestamps is perfectly possible,
and is consistent with what syncqt itself does for "regular" headers.
the immediate problem this solves: when the early creation of the
forwarding headers in qtbase.pro is removed, they get created only when
corelib.pro is processed. their timestamps would be after the timestamps
of the already built bootstrapped libraries. if now the project files of
these libs get re-created, qmake's not conditional-aware dependency scan
would add these headers to the libs' deps, thus causing them to be
re-built. the re-built tools would in turn cause all mocs and thus all
libraries to be re-built. this would be particularly problematic if it
happened between 'make' and 'make install' due to another bug ...
Change-Id: I8d597f1f925369d93aaf3cc6c02e954eeae003a4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this switches all instances of LIBS[_PRIVATE] += -lfoo where a config
tests exists for foo.
this removes some code duplication between tests and project files (in
case of conditionals), and ensures that the projects always actually use
the libraries configure has found.
Change-Id: Ia7e80c8db5f329290c7f1a4e03a8bf78882a687e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this migrates the cases where the build system already made (some) use
of variables (possibly) set by configure.
Change-Id: I43a08caed481d5f887a3a40821e71a4797760e7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adding an entry that represents an external library to the
QT_USE[_PRIVATE] variable will cause qmake to lookup the
required compiler/linker flags from the configuration system,
and add them to the module that is being compiled.
Change-Id: I309aa2749ddf4fab13ab8fdd26e8ab2123719ea8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is just an excuse to let build failures slip past CI, as has
happened and been fixed recently.
Change-Id: If4356eaced0f90c7c455b21cc7676b0c9b7b1e27
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
the limitation to public headers seemed pretty arbitrary.
Change-Id: I0f2290fe09c8a6a70d056ec250b902be7049790e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... including a [-no]-ico command line option.
Change-Id: I3cb13d2be72b512f72f8dcdb9de72e7a99e36e47
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
cleaner, and covers windows as well.
Change-Id: I0e884909a3f49610fab750ba1ef6112f43e5d5d1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Adapt configure.exe to use qmake to do most of the work of configuring
Qt. This unifies a large part of our configuration system between Unix
and Windows. configure.exe is now still doing the license check,
creating qconfig.cpp, building qmake, and not much more.
On the way, re-implement the still missing Windows-specific tests with
the new system.
The opengles2 vs. opengl-desktop conditions got a bit convoluted, as
Unix prefers desktop GL, while Windows GLES2 (via ANGLE). Superficially,
there is a circular dependency, but the platform scopes are supposed to
break it.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia1941f2c34b7f5bd4990a7673cd737361381c2e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
specifically, make configure.bat dump the text file (which got some
windows-specific adjustments).
incidentally, this change removes the need for including a pre-built
configure.exe into our source packages.
Change-Id: Ib3515c113f3602767554fe1493df226551a7bf10
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
that is, save it to config.opt and recall it when -redo is used (and do
not write it again in this case).
a trivial config.status is still created, as having it is very
convenient when shadow-building.
Task-number: QTBUG-38792
Change-Id: I5e9f7374d6bfc60c427cbfd5e9b3e68bfcaae9f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add the command line options supported by the windows version of
configure and respect them when running our configure tests.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I1206d60a177e251540d34d232c73c930847564b3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add [-no]-style-foo command line options for all widget styles, bringing
this closer in line with configure.exe. Add proper platform dependencies
and a configure test for the required uxtheme.h header on Windows. Clean
up and simplify styles.pri. Don't let configure.exe define QT_NO_STYLE_*
any more, as styles.pri does that locally anyway.
Change-Id: I81341f887a65b4e45e77380974eb79743acfad77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So far we only had support for locating executables. Also
support locating header files and libraries.
Change-Id: Ib2a83e8338d2da975204089d84c608061a081f29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some test types (like the compile tests) require that other
features have been checked before, so that the compile test
sets up the right environment. Implement this through a
'testTypeDependencies' section in the json file that explicitly
encodes those dependencies for certain test types.
This replaces the 'priority' field in the feature list.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I70e7c67a4f2c971149bcac090cecbbe9cfff3f57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so far, each library was distributed over a test and (optionally) a
'library' output of a feature. this was conceptually messy and limiting.
so instead, turn libraries into a category of their own.
libraries now support multiple properly separated sources, which makes
overriding them a lot saner. sources can be conditional to accommodate
platform differences.
as an immediate consequence, move (almost) all library references from
the config test projects to the json file.
a few tests were excluded, because they are doing somewhat magic things
that should not be handled in this bulk change:
- freetype: .pri file shared with actual source code
- clock-gettime: -lrt is conditional, and there is a .pri file which is
shared with actual source code
- ipc_posix: -lrt & -lpthread conditional
- iconv: -liconv conditional
the multi-source mechanism is used to make a variety of tests work on
windows, where the library name differs from unix (and sometimes between
build configurations). some tests still needed minor adjustments to
actually work.
on the way, fix up disagreements between manually specified libraries
and pkg-config lines (affecting several xcb-related tests).
Change-Id: Ic8c58556fa0cf8f981d386b13ea34b4431b127c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
having compound tests is messy, and we already have a separate test for
that anyway.
the kms test itself gains a fallback library, as that's what both the
egldevice test did and the actual projects using kms do.
Change-Id: I4544b64de86d58d6c6449bc0ad9095acaf144056
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
never use $$system() directly, but instead use qtRunLoggedCommand() with
a newly introduced out parameter. that way we can print the command's
raw output, which should help debugging configure problems.
additionally, we now consistently check the exit code of all executed
commands, which should avoid confusing followup errors.
note that as a side effect some calls now use $$system()'s 'lines' mode
instead of the bizarre default splitting mode. this has no impact on any
of the cases, which is why it is basically a negligible style change at
this point.
however, qtLog() gained support for arguments with more than one element
to accommodate this.
Change-Id: I40d907e27de32dfec8d6086ce7d93fc4be18241f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the code which they control is dead (due to not having been adjusted to
Q_WS_WIN disappearing).
Change-Id: I4b939e10d33b9da3a5642f303a84f297549ba522
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Qt will not build with -no-qmake.
Change-Id: I0fb5995d53fd3d6e4e5bd956929ce43432fb526d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's not quite clear what the purpose of this is supposed to be,
especially given that the prf is loaded way after anyone would have
examined QT_CONFIG.
Change-Id: Ia49377c952902fed4084178c7f857e1acd11ad03
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Type punning even over a union is not legal C++, and also causes the
compilers to produce poorly performing code.
This has already been fixed for the SSE2 code in bilinear sampling but
not for the NEON code.
Change-Id: Id5e184051e0bd78db730d83ef0dda56ac3206e5b
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
llvm-ar is not shipped as part of Xcode. Use libtool instead, just like
Xcode does.
Change-Id: Ic9c5e16c826c0d42979556f78d2cf6415542ef93
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This commits implement the cursor and selection handle in the platform
plugin.
Task-number: QTBUG-34867
Change-Id: Icb3fd9ddfd9f4152e2004078a92a3d9502e9113c
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The test is blacklisted already for Ubuntu 14.04, and needs to be
blacklisted for Ubuntu 16.04 too.
Task-number: QTBUG-46116
Change-Id: Ic321a4fd13e00c653e6c387d8a159832173b2eb3
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The class doesn't exist and should not be forward declared nor declared
as private of QMacNativeWidget.
Change-Id: I5dd5a12a372c06b6e750b33401a4960a8c884ce6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Replace substring functions that return QString
with corresponding functions that return QStringRef.
Change-Id: I3c485f89352a1ee66076fba74fd486da9349c354
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of guessing which styles we have available (always bold/italic)
register the ones we actually find.
Change-Id: I57380d0417411456a3037f8769440e7b43517e0e
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Since headersFrame is a reference to a vector's element, clearing this
vector before accessing headersFrame.flags is not a good idea, must be
done later.
Change-Id: I80eee0761ac1cad580e979be9371ec7588a694ac
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Setting END_HEADERS flag on a HEADERS frame means we do not have
CONTINUATION frame(s). So do NOT set it too early, only if we
fit into a single frame.
Change-Id: I891a2db227cee59e4eacfe7c2f18b431cd85fe47
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... and mark the library with QT_NO_FOREACH.
Change-Id: I4924f1419f470b5fa92bb2f3fdefa745b65957f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Fix the occurrences where the wrong classes are mentioned.
Change-Id: Ia291af77f0f454a39cab93e7376a110c19a07771
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: I5a6937545561c51add0d48a618b1921cf9201c4b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
They were masked by the pointless user-defined copy special member
functions, which we cannot remove because it would change the way
the iterators are passed by value into functions, on some platforms.
Add a reminder for Qt 6 to fix the issue for good.
Change-Id: I039093894db4a4e5e4bbf94fb346fd90311316c0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- add Q_DECLARE_TYPEINFO for types held in Qt containers (incl. QVariant)
- port Q_FOREACH to C++11 range-for
- port uses of inefficient QLists to QVector
Fixes errors pointed out by my tree's static checks.
Change-Id: I7176b4b12ed47ed23166857bd127c459ea2a48d5
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The only difference between the sample widget sets was:
- widgets << new QLabel("TESTING TESTING");
+ widgets << new QLabel("<b>TESTING TESTING</b>");
I chose the latter, because it's the more complex example
and neither the hoverColors nor focusColors tests suggest
the boldness of the text matters.
Part of port away from Q_FOREACH.
Change-Id: I9a928de4e781b96ad00a8c9515977c35ebfa6c24
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Defined out-of-line, not exported, not used anywhere in QtGui,
so it can be removed.
Change-Id: Ib049bad7d02e5412c063965cd81c8d95e1c1c183
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This allows overriding the INSTALL_ROOT with the Xcode generator.
Change-Id: Ifb894bdbf9764918f76428fb32d9af68914853f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
