And adjust configure.json files that were stale
Amends d385158d52
Change-Id: I851838a12c3773a6e8119ebc7f1de941ae7fe224
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's not clear now whether trackpad gestures on Windows will need to be
so different than on macOS; however, any reasonable int value can be
stored in a qreal, and in Qt Quick we like to use floating-point numbers
for all "real" values and measurements. So since we need to add more
storage, and quint64 m_intValue has never been used, we now replace it
with a QVector2D, which should have the same size. The intended use
is that PanNativeGesture will include a displacement, probably in
pixels, by which the viewport or some target item should be panned or
moved. The naming of deltas() is flexible enough to support any gesture
with some incremental 2D valuators, though, just as value() has
gesture-dependent semantics.
fingerCount() will be useful for Qt Quick pointer handlers to filter
out events that have the wrong number of fingers, e.g. to require that
either a 3-finger pan gesture or 3 individual touchpoints are required
to activate DragHandler { minimumPointCount: 3 } (assuming we implement
pan gesture support in DragHandler).
Fixes: QTBUG-92179
Task-number: QTBUG-92098
Change-Id: I5462aea9047beed6e99075294a62011edd8a59f5
Reviewed-by: Povilas Kanapickas <povilas@radix.lt>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The property 'model' is ported to a bindable property.
The properties hasSelection, selection, selectedIndexes,
and currentIndex are left for later patches.
Task-number: QTBUG-85520
Change-Id: Ia424ce99fc80c3d807c634c21d161a3ad94b27d2
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Those tests don't fail anymore and show in CI as BPASS, so we
can safely, hopefully, unblock them
Task-number: QTBUG-87429
Fixes: QTBUG-68974
Fixes: QTBUG-69166
Fixes: QTBUG-87403
Fixes: QTBUG-87411
Fixes: QTBUG-69083
Fixes: QTBUG-69084
Fixes: QTBUG-87426
Pick-to: 6.1
Change-Id: I831b955116c0f465319b9c5fc726dd98804d1c00
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patchset adds the bits needed for manual tests to work standalone.
Amends ebaa1c15a101579d9296336491e36c63b979f18d
Pick-to: 6.1
Task-number: QTCREATORBUG-25389
Change-Id: Ifc70391bda2a3eea3c7492a58353a703cdc3114c
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We now generate metatypes by default and every instance of GENERATE_METATYPES now causes a warning.
Change-Id: I83a124de3f3bb1fc770cfae0eed955c03e95b310
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Change-Id: I25897ec093aca38081745eff329ec3d042bc02c5
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since these tests do not actually use the filename in the loops, add
macros to declare them unused.
Change-Id: I3362e0478ac6802b37f54f90ca377aa462570d8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously, an apparent POSIX rule would be saved and any defects in
it would only be discovered when trying to use it to generate
transitions. Instead, check that it has the right form during the
initial parsing of its data.
In the process, since checking for DST in the process is trivial,
implement a long-standing TODO to cache hasDaylightTime()'s
answer. The array it scanned was in any case being scanned during
construction, so detecting DST in init()'s scan is trivial; and its
failure to check the POSIX rule mean it failed to notice when zones
entirely specified by a POSIX rule have DST.
Adapt a test using a POSIX-only rule to verify it does know the zone
has DST; it did not, before this change.
Change-Id: I690c013d3331600f7348dae61c35d41e5599da70
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The description necessarily has fake transitions at start and end of
the year, potentially outside the year. These transitions should not
be reported by QTzTimeZonePrivate as transitions, although its data()
must find a "transition" whose data it can use (as in the permanent
standard time case, which could potentially be represented the same
way, although there's a saner way to do so, that the code already
handles) to report the zone's properties.
In the process, fix (and make more straightforward) the convoluted
decision-making code that was deciding which transitions to include in
the returned list. It was assuming invalidMSecs() would be set as the
atMSecsSinceEpoch of a transition, although this is computed in a way
that makes that value most unlikely, even when the result is invalid.
It also rather confusingly mixed < 0 tests as tests for overflow with
the one < 0 test that's about ignoring DST before 1970. Also added
comments to clarify some of what's going on there.
Expanded a recently-added test of a permanent DST zone to verify this
now works correctly.
Change-Id: Ia8d98f433fb1e479dba5479220a62196c30f0244
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are two formats for such fields: one with a J prefix on a number
in the range 1 to 365, the other with no prefix and a range from 0 to
365. The code mistakenly treated the latter as if its range were from
1 to 366. The J-form doesn't count Feb 29th, so March always starts on
day 60; the code tried to take that into account, but adjusted in the
wrong direction (and this mislead me, in a recent partial fix, into a
fence-post error).
Add a test-case based on the Africa/Casablanca POSIX rule seen on RHEL
8.2, which tripped over the off-by-one error without a J prefix. This
incidentally also tests the J case.
Change-Id: I692ca511e5c960f91a6c21073d3b2f037f5e445f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fact that KernedAdvances does not work correctly on a majority
of fonts is confusing. So we warn users that this is the case and
point them to the correct function to use instead.
Task-number: QTBUG-92930
Change-Id: I70f4b09ea1050fceabbff25a9c91008d1754f772
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This increases link time significantly; instead set
"-g4" or the new "-gsource-map" only if source maps
are enabled.
Change-Id: Ibe2d438d48e9ae2fce5f79d4e8a9f17c01cf2485
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The topic existed for QRegExp but is not relevant in QRegularExpression.
Pick-to: 6.1
Change-Id: Ife9d42b5b03163cfefff19725409a3feac1cddb2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
It usually fails the test with "corrupted size vs. prev_size" message
coming from malloc() or some other memory allocation routine (which
signals about memory corruption probably)
Task-number: QTBUG-93176
Change-Id: I5e34971267c52c63cda2489bef5b09bed739f532
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 6d52d86b999088ec07e58c14197bddda043ef0aa)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The major part is stability tests for QList operations,
Also added std::shared_ptr to the Custom type. shared_ptr
accesses the memory which does not directly belong to
QList, so using it inside a passed-to-qlist type is
beneficial (e.g. ASan could catch extra issues)
Basic prepend-aware cases added to QString/QBA tests
Task-number: QTBUG-93019
Change-Id: I50e742bdf10ea9de2de66539a7dbb9abc4352f82
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit adb41bbe00b2b853d4dd26cd9ee77ae5ed541576)
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Drop the "move left if pos <= size / 2" path in favor of reference
stability of insert and emplace operations
Leave the insert(0, ...) and emplace(0, ...) as special cases for
prepend optimization as invalidating [begin, end()) practically means
that we can reallocate behind the scenes
Doing this also simplifies the code a bit
Task-number: QTBUG-93019
Change-Id: I7c248f96d687e94a6a38f81ade901619ff2b4733
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 5e76c2acff2c70f2893306b16aeba230f3d6114a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Because leaving the pointer untouched is a much more expected behavior
The tests for this (and not only) logic can be found in the following commit
Change-Id: Iec9eec9bbce04c9fd90cb6be9627c135cd989b7f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 38bba2a87c6c5c2b8100870add6d0d7ad559e669)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Test the relocation logic through the QADP::relocate() method which
basically calls q_relocate_overlap_n inside and then ensures that
the data pointers are in good state
Running these locally in fact revealed a bug in the implementation,
so these tests are definitely good to have
Task-number: QTBUG-93019
Change-Id: I353ed46a31c5c77cd0c5fcacd3dfce46e5cf3e67
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 65d0f6829cc124f6d0d4003a17bedcb74dddf33b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Use the data moves to readjust the free space in the QList,
which ultimately fixes the out-of-memory issues caused by
cases like:
forever {
list.prepend(list.back());
list.removeLast();
}
Task-number: QTBUG-91801
Task-number: QTBUG-91360
Task-number: QTBUG-93019
Change-Id: Iacff69cbf36b8b5b176bb2663df635ec972c875c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit a0253f5f0249024580050e4ec22d50cb139ef8d9)
We already used it in QString and QBA. And implicitly in QADP (see
parent commit). Might as well move to a common location and reuse
Change-Id: I694f0f1dbd109f17c134f64b3f3dc28d19556c88
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 10b46e7f0faecc42a94cc2e25ad3edd08ae28083)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Added branching to plugandpaint example to get correct library
architecture to the build
Fixes: QTBUG-56322
Pick-to: 5.15
Change-Id: I4d0eb4e24681642991d08c3dd2bad73d10caf962
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When configuring a Qt module with qt-configure-module, we want to use
the same CMake generator that was used for building qtbase.
That generator is encoded in qt-cmake-private. But qt-configure-module
overrides the generator after trying to detect what generator should be
used. That auto-detection is only useful for qtbase-builds and top-level
builds. Turn it off for repo builds other than qtbase.
Pick-to: 6.1
Fixes: QTBUG-91405
Change-Id: I07efb4afb51ba69d2f5467d272118fa51637ab54
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is the counterpart of the qmake variable
ANDROID_TARGET_SDK_VERSION.
Pick-to: 6.1
Task-number: QTBUG-86033
Change-Id: Idd64ee06eb94826430e6be5d9d878631db67c949
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This is the counterpart to the qmake variable ANDROID_MIN_SDK_VERSION.
Pick-to: 6.1
Task-number: QTBUG-86033
Change-Id: I4e1434a794f3a8345f9b4e045ab4366d486221af
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Those are the CMake counterparts of the qmake variables
ANDROID_VERSION_{NAME|CODE}.
Pick-to: 6.1
Task-number: QTBUG-86033
Change-Id: I57534ff04db0c78871fe7ba81bedaf377422054b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
It's important for conan CI builds where the correct installation
location of Qt should be used when configuring standalone tests.
Task-number: QTBUG-93037
Change-Id: I2465a439aea6826dedfb3217d1c909ad639d4ac0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qtbase/src/corelib/kernel/qsharedmemory_p.h:62:33: error:
unknown type name 'QString'; did you mean 'XXXX::QString'?
int createUnixKeyFile(const QString &fileName);
^~~~~~~
XXXX::QString
Pick-to: 5.15 6.0 6.1
Change-Id: I455526503f059efc2f496b159b4cb098385dda00
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add override to addPaths and removePaths in kqueue filesystem watcher
Fixes build break in developer-build with gcc 10 on *BSD
Pick-to: 6.1
Change-Id: I7d91251d6bcb1614bb9f21c319abc9c2df681cda
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
DEFAULT_IF needs to be true so that in a static build the
built plugin is automatically linked into the test executable
using the special static plugin per-repo behavior in
qt_internal_add_executable.
The QtPostProcess routines are not executed for this test project
because we don't use qt_build_repo. This means that no
QtFooPluginCMakeConfig.cmake file is generated and thus there's no
point in using qt6_import_plugins because the pulic plugin genexes
won't know about this target anyway.
Explicitly set the CLASS_NAME so that the name expected by the
Q_IMPORT_PLUGIN macro matches the name of the plugin instance that moc
generates in QT_MOC_EXPORT_PLUGIN.
Amends 22e967c304
Task-number: QTBUG-87580
Task-number: QTBUG-90341
Pick-to: 6.1 6.0
Change-Id: I5ef361e7e2cebc46b35310c679f15c84cd61b4a5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously, in a top-level build we always generated the final prl
file somewhere under QT_BUILD_DIR (which is qtbase_build_dir). After
each repo was processed by QtPostProcess.cmake, we installed the prl
files found in PROJECT_BINARY_DIR.
For qtquickcontrols2 this meant that qml plugin prl files were placed
under qtbase/qml, but we tried installing the prl files from
qtquickcontrols2/qml, which didn't have any prl files.
In a static Qt build, qmake's qt.prf calls qmlimportscanner to
identify which plugins should be linked to the executable. This worked
fine because the plugin .pri files were installed correctly.
None of the qml plugin library dependencies were linked in though.
This is supposed to happen in qmake's C++ code where it tries to
find the associated prl file of a linked library in order to extract
all its dependencies. Because no prl file was found, linking failed
with multiple undefined symbols.
Fix this by installing the prl files from QT_BUILD_DIR rather than
PROJECT_BINARY_DIR.
Note that this will create multiple install rules for certain files,
but it's harmless. An example is imageformats.
We process qtbase plugins, see qjpeg, issue an install rule from under
the qtbase/plugins/imageformats folder. We then process
qtimageformats plugins, see webp, issue another install rule from
under qtbase/plugins/imageformats.
The first install rule will install both qjpeg and qwebp, the second
install rule will merely say all plugins are up-to-date.
Pick-to: 6.1 6.0
Change-Id: I8a4bb67bfafc1d016eab62f4fe66b6ba378ceeb2
Fixes: QTBUG-93021
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The six properties duration, updateInterval, currentTime,
direction, loopCount and easingCurve have been ported to the
new property system and are now bindable.
Drive-by renamed a local variable to avoid shadowing.
Task-number: QTBUG-85520
Change-Id: Ibabf106f5200d2dd4329a1e1f96112eccc29d6b1
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For items that are children of other items, removeRows calls
beginRemoveRows directly and then once again inside takeChild()
The signal blocker that dates back to the monolitic import from Nokia
prevents the model from emitting extra signals
but the persistent indexes are corrupted nonetheless.
Fixes: QTBUG-90030
Pick-to: 6.1 6.0 5.15
Change-Id: I5bc4b2598bf13247683b113faeec22471f1f04a4
Reviewed-by: David Faure <david.faure@kdab.com>
When inserting rows to a branch with no columns
the tester should not complain about indexes being invalid
Pick-to: 6.1 6.0 5.15
Change-Id: I466f4e5140b10f6dcf65a71f109c2d3be7336507
Reviewed-by: David Faure <david.faure@kdab.com>
The qt_ForceTlsSecurityLevel symbol is not defined if SSL is not configured,
so don't use it in the QNetworkReply test if it's not.
Change-Id: Id3110a1997fea1648b48bfc411e90e7efe306678
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In a cross built Qt, for example Qt for Android, calling "qmake -spec
android-clang" led to an error message:
"Could not find qmake spec '-qtconf'."
This happened, because:
- the qmake in Qt for Android is a wrapper script that calls
"qmake -qtconf qt_target.conf -spec android-clang"
- the first stage of command line argument handling in qmake garbled the
call to "qmake -spec -qtconf qt_target.conf android-clang"
We do not modify the order of arguments anymore.
Instead, we skip the "-qtconf <file>" arguments in the first argument
handling stage that is supposed to determine qmake's modus
operandi (like -project or -query).
In addition, we need to fix the assignment of
QLibraryInfoPrivate::qtconfManualPath which was only done if
QMakeGlobals::addCommandLineArguments returned ArgumentsOk. However,
this function returns ArgumentUnknown, if it encounters an argument it
cannot handle - like the project name.
Now, we assign QLibraryInfoPrivate::qtconfManualPath if there was no
error detected.
Document the return values of addCommandLineArguments.
This amends commit 661b586a69.
Pick-to: 6.1 6.0
Fixes: QTBUG-93079
Task-number: QTBUG-85136
Change-Id: I12ec25b17d64c00be2a3904b7c4a975b781500a0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Routine update with minor changes to locale data, no new languages,
territories or scripts. Various Spanish locales change m_grouping_top
from 1 to 2, reversing a change to a test of Costa Rica's currency
formatting made in commit bb6a73260e.
Includes updates to time-zone IDs.
Fixes: QTBUG-91478
Pick-to: 6.1 6.0 5.15
Change-Id: I78ee161275b3c456c5800a7317a96947c932cf8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The kernel appends that to the symlink targets in /proc for files that
have been deleted.
Change-Id: I7a386ad4f0cb4e2ba629fffd16789b5a52491627
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
There's no need to find the local time zone and do expensive conversions
to compare regular, old seconds-since-1970 to the time now.
Task-number: QTBUG-93069
Change-Id: I6cdea00671e8479b9c50fffd167897b91a04ce03
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
A c&p mistake manage to slip through in 5fabad9a61, amend it.
Change-Id: I706a6643d0745f336afca7bda0d8b0359354a0d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt defines some integral datatypes (qsizetype, qintptr, quintptr,
qptrdiff) not in terms of the corresponding language datatypes (resp.
make_signed_t<size_t>, intptr_t, uintptr_t, ptrdiff_t) but as "integer
types with the same bit size of the corresponding language type" (and of
course the corret correct signedness for the target type).
This makes the Qt datatypes not printable via printf-like formatted
output, incl. qDebug, qWarning, QString::asprintf and so on; that's
because there isn't a format modifier that would universally work
with the Qt definitions.
For instance, on a 32 bit platform, ptrdiff_t may be a typedef for long,
while qptrdiff is a typedef for _int_ instead. Both long and int would
indeed be 32 bits, but they still are different types, and this means
that the ptrdiff_t-specific 't' length modifier would be wrong for
qptrdiff:
qptrdiff p;
printf("%td", p); // WARNING: -Wformat: wanted long, got int
Similarly, not using 't' breaks on 64 bits, and so on and so forth.
There isn't a way out, short of inserting casts on every print
statement.
So, let's adopt the same solution C/C++ use for their own integer
typedefs: the PRIx macros. This allows one to always use the correct
formatting specifier without the need of a cast.
I'm not adding the macros for the qintXX datatypes, as they already
exist in the Standard Library.
[ChangeLog][QtCore][QtGlobal] A series of PRIxQTDATATYPE macros have
been added. They make it possible to print some Qt type aliases
(qsizetype, qintptr, etc.) via a formatted output facility such as
printf() or qDebug() without raising formatting warnings and without
the need of a type cast.
Change-Id: I473226a661868aed9514d793c8e6e4d391ab5055
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
