QVariant claims to be able to QVariantHash and QVariantMap, but the
actual conversion implementation is missing.
Task-number: QTBUG-61471
Change-Id: I0cba74642aa77dc423effed289bc7619922a89eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that QFileDevice::setFileTime() provides a portable way to prepare
our test file, we can verify QFileInfo does handle the distant past,
notably including negative time_t values. The old MS-specific code
used a time back in 1601, which we can't hope to support
cross-platform, so use one in 1901 that's a little inside the range of
32-bit time_t.
Task-number: QTBUG-47985
Change-Id: I2de3e79d8c7864221f92395813b63f373e4d8a3b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output didn't previously make clear that the datum was invalid.
It's now explicitly invalid. At the same time, use QDebug's space()
and nospace() methods to make spacing choices explicit.
Revised a QDate test to match.
Change-Id: I4699f5897530b4caa31c22fdb07de149832b30f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Separate the part varying between tests from the common form of all
the tests, so the reader can see the common pattern and know for sure
that there's not a typo or copy-and-paste glitch.
Change-Id: I3145a26ab42c104eb27756d906ac87f937024bad
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QLocale] Fixed the conversion of QTime to string
form and parsing from string form to always treat the value as the
decimal fraction of the seconds component. That is, the string format
".z" produces/parses ".2" for 200 milliseconds and ".002" for 2
milliseconds. Use of "z" or "zzz" is discouraged outside decimal
fractions to avoid surprises.
Task-number: QTBUG-53565
Change-Id: Ia19de85ad35e4eb7bb95fffd14792caf9b4a5156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QWindowsFileSystemWatcherEngine uses one change notification
per directory to watch directories or files within that
directory. Adding files and their directories in a sequence
caused the value in QWindowsFileSystemWatcherEngineThread::HandleForDirHash
to be overwritten.
Relax the check for the flags (watcher attributes) to use >= and recreate
the change notification of a directory should its flags be insufficient.
This triggers when a file is added after its directory since files
require more attributes.
Task-number: QTBUG-61792
Change-Id: I371a72f1934fa82c53aaf84beb907825031f1c81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixed crash on QCoreApplication::translate() call from qqmlThread while
QCoreApplication::{install,remove}Translator() is called from the GUI
thread.
[ChangeLog][QtCore][QCoreApplication] Calling
QCoreApplication::translate() is now thread-safe.
Task-number: QTBUG-57095
Change-Id: Ie5340a42040a829f311c01332e05d4bbaf60462c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The getentropy function, first found in OpenBSD, is present in glibc
since version 2.25 and Bionic since Android 6.0 and NDK r11. It uses the
Linux 3.17 getrandom system call. Unlike glibc's getrandom() wrapper,
the glibc implementation of getentropy() function is not a POSIX thread
cancellation point, so we prefer to use that even though we have to
break the reading into 256-byte blocks.
The big advantage is that these functions work even in the absence of a
/dev/urandom device node, in addition to a few cycles shaved off by not
having to open a file descriptor and close it at exit. What's more, the
glibc implementation blocks until entropy is available on early boot, so
we don't have to worry about a failure mode. The Bionic implementation
will fall back by itself to /dev/urandom and, failing that, gathering
entropy from elsewhere in the system in a way it cannot fail either.
uClibc has a wrapper to getrandom(2) but no getentropy(3). MUSL has
neither.
Change-Id: Ia53158e207a94bf49489fffd14c8cee1b968a619
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It breaks sth in QLocalSocket which is used in QtRemoteObject.
This reverts commit 5c6210e345.
Task-number: QTBUG-61668
Change-Id: Ib11890923773496e5d998b7709ef93b0a839a759
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Follow the pattern used to guard Private::sort() calls elsewhere in the
class.
Because QAbstractItemModel::sort() is not called in the unit test, the
content is not sorted after resetting.
[ChangeLog][QtCore][QSortFilterProxyModel] QSortFilterProxyModel
now does not emit an unnecessary layoutChanged() following a model
reset.
Change-Id: I0a36c7fbb172bdd06ecddb489c5595debbef6cb9
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Makes the qle_bitfield template more generic and moves it to qendian_p.h
It is also hardened to be more reliable.
Change-Id: I53214ec99cceee4f5e8934ae688c99e555a5fb42
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid the dimensions of the rounded QRect being off by more than one
pixel. This ensures the aligned containing rect also contains the
rounded rect.
Task-number: QTBUG-56420
Change-Id: Ib79110e51ab80de2dc83d01ea83fc5fbf3852e75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
[ChangeLog][QtCore][QWinEventNotifier] QWinEventNotifier is not
restricted to 62 instances anymore.
Task-number: QTBUG-8819
Change-Id: I2c749951453a4b699cc50dada0d6017440b67a4a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
GCC didn't support it until version 5 or 6, so add configure tests for
both <random> and <sys/auxv.h>. Normally I'd say "upgrade", but this is
too low-level and important a feature.
There's a good chance that all our supported compilers have <random>
anyway. As for <sys/auxv.h>, it's present on Glibc, Bionic and MUSL, but
I don't see it in uClibc (AT_RANDOM is a Linux-specific feature).
Change-Id: Ia3e896da908f42939148fffd14c5b2af491f7a77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The serialization of date-times understood time-zones (indicated by a
't' in a format string) but the parsing didn't (so viewed the 't' as a
literal element in the format string, not matched by the actual zone
it needs to parse), although some tests expected it to.
This made round-trip testing fail.
Implemented parsing of time-zones.
Re-enabled the formerly failing tests.
[ChangeLog][QtCore][QDateTime] Added support for parsing of time-zones.
Task-number: QTBUG-22833
Change-Id: Iddba7dca14cf9399587078d4cea19f9b95a65cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The formatting of times in Norwegian has changed to use colon rather
than dot between hours, minutes and seconds:
http://cldr.unicode.org/index/downloads/cldr-30#TOC-Other
tst_QLocale gets a matching revision.
Change-Id: I35a16080def5fbadd62144a0b44be8110b9be29b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It should be easier to translate sizes in bytes to human-readable
strings consistently rather than having to repeat this code (and the
string translations) in various places. The FileDialog in QtQuick.Controls
has a use for this, too.
[ChangeLog][QtCore][QLocale] Added QLocale::formattedDataSize() for
formatting quantities of bytes as kB, MB, GB etc.
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I27bca146c3eba90fa7a5d52ef6626ce85723e3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is flaky on macOS 10.12.
Task-number: QTBUG-61500
Change-Id: I3dfb6979808dec3a20896c2579dd1f5124c94a70
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Randomly timeouts in the CI.
Task-number: QTBUG-59679
Change-Id: I28410b747b2033fc0ef6286a11c88cd0c07eb247
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
As the files are packaged into the binary, they have to be
extracted, before they can be ::open'ed.
Change-Id: Ie83086a2b9a73b6b0de462bdb52a71bb277ae06f
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
[ChangeLog][QtCore][QProcess] Added support for standard channel
redirection using setStandard{Input|Output|Error}File to
QProcess::startDetached.
Task-number: QTBUG-2058
Task-number: QTBUG-37656
Change-Id: Iafb9bd7899f752d0305e3410ad4dcb7ef598dc79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The motivation for this change is to make it simple to pass a
correctly sorted environment block to Win32 CreateProcess(). It is
also nice in other contexts that the environment variables are
sorted. The change is made for all platforms. This keeps it simple and
the only ill effect is slightly slower lookups.
Concerning the environment block passed to Win32 CreateProcess:
The environment block that is passed to CreateProcess() must be sorted
case-insensitively and without regard to locale. See
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682009(v=vs.85).aspx
The need for sorting the environment block is also mentioned in the
CreateProcess() documentation, but with less details:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682425(v=vs.85).aspx
Task-number: QTBUG-61315
Change-Id: Ie1edd443301de79cf5f699d45beab01b7c0f9de3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When punctuation is ignored then the kUCCollatePunctionSignificantMask
should not be set. This was originally thought to not be working due to
a bug on the Apple platforms, but this is not the case.
[ChangeLog][Platform Specific Changes][macOS][iOS] QCollator now
respects the ignorePunctuation property on Apple based platforms
correctly.
Task-number: QTBUG-41978
Change-Id: I62044076387d6e4479f4aaef3c2f48f49dbd160e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
First and most importantly, let's not use more than half of the template
for the application's PID. With over 71% of all PIDs on a typical Linux
system and 90% of those on a Darwin system having 5 decimal digits,
using them all in a template that is usually 6 characters long is
wasteful. That leaves only 1 character for the random part, thereby
reducing the number of temporary files possible to only 52. So limit the
PID to half the characters of the template.
Second, let's use QRandomGenerator::bounded to create the the random
part, instead of qrand (which is often unseeded at this point).
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b52eda5e467395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This class provides a reasonably-secure random number generator that
does not need seeding. That is quite unlike qrand(), which requires a
seed and is low-quality (definitely not secure).
This class is also like std::random_device, but better. It provides an
operator() like std::random_device, but unlike that, it also provides a
way to fill a buffer with random data, not just one 32-bit quantity.
It's also stateless.
Finally, it also implements std::seed_seq-like generate(). It obeys the
standard requirement of the range (32-bit) but not that of the algorithm
(if you wanted that, you'd use std::seed_seq itself). Instead,
generate() fills with pure random data.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b4e3ba9ea04da8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Makes it easier to pull out data from a document when the structure is
known up front, while still supporting default values if the structure
does not match the expectation, eg:
int age = QJsonDocument::fromJson(ba)["users"][0]["age"].toInt(-1);
Change-Id: Ief0899bbb81610f6f22a56e2ac846121bffe77a0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Saves a lot of manual toArray() and toObject() calls when the
JSON structure is usually known anyways. Read only access for now.
Change-Id: I5fd787144198e0443e4da285a11ce2597b66f99f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTimeZone("UTC") should be valid, as "UTC" appears in the list of
availableTimeZoneIds(), and tst_QTimeZone::dataStreamTest() constructs
timezones like this, which are considered valid.
The internal representation of a QTimeZone("UTC") as created by
QTimeZone::QTimeZone(const QByteArray &ianaId) is a QUtcTimeZonePrivate
which isValid(), so the containing QTimeZone isValid() too.
When QTimeZone is serialized into a QDataStream, it calls
tz.d->serialize(ds) which is QUtcTimeZonePrivate::serialize. This
writes QStringLiteral("OffsetFromUtc") followed by the IANA ID and
the offset (etc.) to the datastream.
When QTimeZone is deserialized it looks for this marker string, and if
present, it passed all of the parameters to the QTimeZone constructor
(not just the name). However, that constructor does not support standard
IANA timezones (only custom ones), and when it detects that the supplied
IANA ID is actually listed in availableTimeZoneIds(), it leaves the
pointer to the QTimeZonePrivate uninitialized (NULL), which leaves
the QTimeZone invalid (isValid() returns false).
Thus, a valid timezone which was serialized and then deserialized has
become invalid. This also affects serialization of QDateTimes with
timezones.
Fixed by calling the name-only constructor first, which works (only) for
IANA standard timezones and leaves the QTimeZone invalid (isValid()
returns false) otherwise. In which case, we can call the many-argument
contructor to create a custom timezone with the same offset as the one
which was originally serialized.
[ChangeLog][QtCore][QTimeZone] Fixed sending IANA standard UTC-offset
QTimeZones through QDataStream, which previously came out invalid after
deserialization.
Task-number: QTBUG-60595
Change-Id: Id9c47e8bda701faae4d800e012afb6db545b2fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is possible that tmpdir already exists as a leftover from previous
tests. That is no reason for the test to fail.
Change-Id: I010633fb92defb064093af9872ae6fd2178f07dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
load(resources) makes embedding the test data into the executable
fail for platforms that use builtin test data. As the load call
is only used to obtain QMAKE_RCC we can avoid that call by
assuming that rcc was not renamed and assembling the path ourself.
Change-Id: I25b982d10f5617d9a213803e7e4bcc85fc66b2e7
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The binary hangs rather than segfaults on that platform.
Task-number: QTBUG-59936
Change-Id: Id7d38edb7c746e3c0cd4b4941e0e19b3d42a628a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
