Descriptions for WINRT_MANIFEST's subkeys are in the documentation.
Having a copy in the prf file is superfluous and is likely to run out
of sync at some point.
Change-Id: Icea49854981990139305f6dc4e73d1b9dcb01dd5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this is an exclusively user-controllable variable. the mkspec may provide
a default via QT_QPA_DEFAULT_PLATFORM when it deviates from the platform
default known to configure, and these specs actually already make use of
that.
Change-Id: I7531063d4c404ebed7b2cc1647c61626db30daef
Reviewed-by: Kyle Edwards <kyle.edwards@kitware.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
fix the plugin name (it was missing the leading 'q') and the name used
in configure (the latter making it unnecessary to mess with it in the
mkspec). the qt.prf override which forced linkage of the plugin is also
removed due to being completely redundant.
Change-Id: I94687a34a295c36754e36a298af902b656ba2ecc
Reviewed-by: Kyle Edwards <kyle.edwards@kitware.com>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
these libraries are handled by the configure system. i presume this to
be an artifact of an early version.
Change-Id: Ieee0554163a9fe296097d09e60a70719beee97b4
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
when building additional modules against an already installed qtbase,
$$[QT_INSTALL_PREFIX/get] is obviously the same as
$$[QT_INSTALL_PREFIX], so we would misdiagnose a non-prefix build.
instead, use the same condition as qt_build_config.prf (we cannot just
rely on what it sets, because in qtbase configure context it's evaluated
before we set up the paths).
Fixes: QTBUG-60541
Change-Id: I37be30e0e682ece76ed460a66f1984ee0fe2ed71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... for debugging purposes.
this needs to work in every configure run even though the options
(currently) come from qtbase's global scope. this is accomplished by
automatically injecting the test type dependencies declared in the
'builtins' scope (where they generally make no sense whatsoever, because
there are no tests there) into other scopes (the first one that has a
test of the particular type, specifically). we do that *after* the
scope's own test type deps, so it can do its custom stuff first (it can
explicitly activate the required features if it depends on some global
stuff).
Change-Id: I67317da1b55804d39458bdbcf13d39a3e57a13bf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
there is no reason whatsoever to ignore the variable if it's set to an
invalid value. also, it being empty would lead to a warning from qmake
since a while.
so instead check it for emptiness like every other variable, not for
file existence.
Change-Id: I1119f67520d2986811501cd3f223f8f4a87d067d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Removes need to manually build up qmake command line when there's
already a Makefile generated (from a recursive qmake_all run e.g.)
Instead, just run 'make xcodeproj'.
Change-Id: Ibe91b183230721a4bcaddfde53b623df00f7adb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In NDKr18 Google removed GCC, most probably the massacre will not end
there and they will remove all GNU tools, so we need to start using LLVM
ones.
This patch still keeps the compatibility with GNU tools if the Qt was
built with android-g++ mkspec.
Change-Id: Ibe1979577e08ce63604d55fc5bbd5f64b3737675
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
[ChangeLog][qmake] Introduced the variables
WINDOWS_TARGET_PLATFORM_VERSION and
WINDOWS_TARGET_PLATFORM_MIN_VERSION for overriding the default values
of WindowsTargetPlatformVersion and WindowsTargetPlatformMinVersion in
Visual Studio project files.
The code to determine the default values is moved to qmake feature
files. A common/windows-desktop.conf file is introduced for variables
common to all non-UWP Windows mkspecs.
The package_manifest feature uses WINDOWS_TARGET_PLATFORM_VERSION as
default value for WINRT_MANIFEST.minVersion, and
WINDOWS_TARGET_PLATFORM_MIN_VERSION for
WINRT_MANIFEST.maxVersionTested respectively.
Task-number: QTBUG-53654
Change-Id: I251ec7f9b804c9bc9f7d571f5b43d52b2a2d99d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Allows a qt build to be configured to target arm64 desktop apps cross
platform and build them with nmake.
Change-Id: I99fed12047b45a504a1644201bcc19b18c69f3e6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
AR and NM have different tools when LTCG is used,
override those also when cross compiling.
Fixes: QTBUG-71595
Change-Id: I5347bd1874688dd89395c50ff6dd08fb1c0ebab1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need to support apps building against the 10.13 SDK, so that they
can opt out of dark mode and layer-backing. This does not mean we can't
require 10.14 to build Qt itself, but doing so should not require the
app to also build against the 10.14 SDK.
Change-Id: I53bd0fc8bf56c0be6614acec14d5173589e2620f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to inform the user when they have upgraded their Xcode version
and hence have a new SDK version, which requires a complete rebuild.
Explicit changes to the Xcode selection (be it via xcode-select or
$DEVELOPER_DIR) do not affect the existing build directory, so we must
record the Xcode selection inside the build to avoid false triggering.
Change-Id: I7d13da1232226712a4951e8a360cf4b634c6fa2f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Removing the extra space before -MT ensures that the vcxproj
generator gets valid input.
Change-Id: Iccf88c5fc4473db406d714b646185a4fb60a3418
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The dependencies.json file allows to tweak the list of imports the
module is depending on, so that types implicitly imported are not
listed twice.
Task-number: QTBUG-70264
Change-Id: I7a3800e5ea713a8aaae0cddbf4e1607f92c41497
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The correct name is c++1z. Anyhow, this is easy enough to get wrong,
so make sure CONFIG += c++17 works as well.
Task-number: QTBUG-67527
Change-Id: Iea26b18824b38b1b5170f85987cf5c750b8e10ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
In NDK r18, libc++.so was renamed to libc++.so.XX where XX is the Android
API level.
[ChangeLog][Android] Fixed build issue with NDK r18+.
Task-number: QTBUG-70631
Change-Id: Id0d2955648197e3054e3c69263b5a90d57964f6c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
This reverts commit 4bdd8d4eca.
It contains an error.
Change-Id: I51052029f001b9e82c2a53de15b4ba354aafdbae
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
In order to ship our own version of wayland.xml protocol code we need
to get rid of all includes of system versions of
wayland-client-protocol.h and wayland-server-portocol.h.
These were unfortunately included by wayland-client.h and
wayland-server.h and now can't be removed because of compatibility
issues. To solve this, wayland-client-core.h and wayland-server-core.h
can be included instead, which don't include any generated protocol
code. Again, due to compatibility concerns, wayland-scanner does not use
these versions unless invoked with --include-core-only, which is what
this patch fixes.
Task-number: QTBUG-70553
Change-Id: Icf7c870bd4d5bf891628cbddce2a9de3dda50164
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This change applies to darwin. It adds each include path in the
QMAKE_DEFAULT_INCDIRS variable to the qdoc command line with the -I
flag for both the prepare and the generate phase. These include paths
provide access to the standard c++ and c headers, which clang needs
to see. This change should work on all platforms, but it increased
the qdoc warning count on the linuxsystem where it was tested, so
now it only applies to darwin.
Change-Id: I16e2e0d744e2cf68743dc12d39155dda2ece1536
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This broke the build for qtlocation.
This reverts commit 176a216f4f.
Task-number: QTBUG-70779
Change-Id: Ifd8419ffb88c1a9009319f39b11b4529b143477e
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Add properties enabled_features and disabled_features the respective
library targets.
This makes it possible to query the enabled classes in dependent libraries
(for example, Qt for Python).
Add a test verifying whether the Open GL configuration is reflected
correctly in the feature properties to the existing test_opengl_lib
autotest.
Change-Id: I645c947073dbb36da3be81de6bc62ee0ba1e73d6
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In NDK version r18, the libc++.so file we used for clang has been
removed. However, in r17 this was actually just redirecting to
libc++_shared.so, which is still available in r18, so we can
link directly to that instead.
[ChangeLog][Android] Fix build issue with Android NDK r18 and clang.
Task-number: QTBUG-70631
Change-Id: I658c0cabf49f27a47f38305de3c86067c8b18b25
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
in non-prefix builds, the forwarding headers always end up in qtbase's
build dir, while the injected headers always live in the build dir of
the module they belong to. to deal with that, we now record the target
path relative to the module root dir instead of relative to the base
directory of the forwarding header itself.
Fixes: QTBUG-70056
Change-Id: Ic4346148a125b13e2610f6965cdf4f5266ac763e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
39cb9ac873 moved the _ENABLE_EXTENDED_ALIGNED_STORAGE define from
msvc-version.conf to msvc-desktop.conf which basically removed the
define from winrt builds. By adding it to winrt's common qmake.conf
these builds are fixed.
Change-Id: I3d87c55fb52685859713f7466012b45c46145678
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add QMAKE_QMLPLUGINDUMP_FLAGS variable that allows plugins to set
qmlplugindump options like -app, -noforceqtquick.
The naming follows the example of e.g. QMAKE_LRELEASE_FLAGS.
Task-number: QTBUG-70264
Change-Id: I1d11b7f3b03fab79ab9e06188cecf31650789302
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Otherwise the SDK upgrade (or downgrade) may subtly and silently affect
the resulting binary, or if it results in build breaks, the user won't
know why.
We limit it to applications for now, as that's the point where it's
most important to catch the SDK upgrade, but technically we should
also do this for intermediate libraries. Doing it for everything
will likely incur a performance cost, so we skip that for now.
Change-Id: I8a0604aad8b1e9fba99848ab8ab031c07fd50dc4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This is the squashed diff from wip/webassembly to dev.
Done-with: Peng Wu <peng.wu@intopalo.com>
Done-with: Sami Enne <sami.enne@intopalo.com>
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Started-by: Andrew Knight <andrew.knight@intopalo.com>
Change-Id: I6562433c0a38d6ec49ab675e0f104f2665f3392d
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Move the definition of _ENABLE_EXTENDED_ALIGNED_STORAGE
to msvc-desktop.conf so that it becomes effective
for all compilers using MSVC (icc, clang-cl).
Task-number: QTBUG-50804
Change-Id: I5ff612cc0f5a712b855925f9bcf645e578e80504
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As planned, we only support the latest and previous release for these
platforms, and by the time 5.12 is out these platforms will all have
had new releases, so we should bump the deployment target now.
Change-Id: Ibbb7d07bb5d9a1007ab37b88d75781be2c1f7075
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
As discussed earlier, we don't want to keep backwards compatibility
for more than two versions in addition to the current macOS version.
Change-Id: I24df6fb4a08e14a9f842d209b8e0a6079c533b65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
After 0ef66e98cc was merged, the same should be done to
Windows ICC toolchain.
Task-number: QTBUG-69997
Change-Id: I1d76d8b59f87151a9064d9f7dcc3136dc1215633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the global flags are deprecated in favor of per-library paths, but they
obviously should still work. but apparently no-one cares, because there
isn't even a bug report about it ...
amends 90eee08b3.
Change-Id: I85aee41ca11de1715d1c750ae8e663093e012fb7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
the cherry-pick is needed to support QtWebEngine 5.12 with Qt 5.11,
a requirement that was raised too late.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 95b0e4c956)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some distributions do not define MINGW_HAS_SECURE_API globally,
resulting in methods like wgetenv_s not being declared in the
headers.
This is probably to keep compatibility with Windows XP. Anyhow,
we don't support Windows XP anymore, so we can safely add the
define.
Note that this is not necessary for the mingw-builds distro,
which is the only one we test and support. Anyhow, I don't
see any risk in adding these for other distributions.
Diff was provided by Philippe Dunski in the bug report.
Task-number: QTBUG-67443
Change-Id: I3a64b11541fe95e527ed44bbf8ad94469d457d3d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CONFIG+=lrelease enables that all .ts files in
TRANSLATIONS or EXTRA_TRANSLATIONS are compiled by
lrelease.
EXTRA_TRANSLATIONS is a new variable that is only
processed by lrelease, but not lupdate - this
is useful for translation files that are supposed to
be empty, because they match the language of the
original translation sources.
If embed_translations is also set, the generated .qm
files will be made available through the Qt resource
system under :/i18n/. Alternatively, the user can
specify an installation target by setting
QM_FILES_INSTALL_PATH.
Note that relative paths in TRANSLATIONS are not taken
into account. That is,
TRANSLATIONS = component1/de.ts component2/de.ts
will cause a conflict.
[ChangeLog][qmake] New CONFIG options lrelease and
embed_translations were added. CONFIG+=lrelease does
run lrelease on translation files listed in TRANSLATIONS
and EXTRA_TRANSLATIONS. CONFIG+=embed_translations does
include the generated .qm files as resources under
:/i18n/.
Change-Id: I94db5b8431d07b24f59b2c332ede91450f9c0c58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
To avoid (even more) duplicated code, "qt_test_helper" ensures the
policy of putting a test's helper application next to the test's
own executable.
The helper executable is suffixed with "_helper" to avoid name
clashes with its folder.
Change-Id: Ic50cb1daa257e7ffc75440c10a3b90fd39424683
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Instead of having tests installed into a folder named like their
target, we now use their source folder name for the installation.
An upcoming patch will rely on this behavior and simplify creation
of tests that need helper applications.
Change-Id: I17d9ff15edf502d82ab698627189532b83e72546
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
configure already does it for qt itself, so it's pointless to ever invoke
in default_pre.prf.
to make the exclusion work during the makespec reload during early setup,
we pull ahead the restoration of CONFIG, hoping it won't cause too many
side effects.
another change in qt5 will ensure that top-level builds are also covered.
finally, configure tests also need an explicit exclusion.
that way, attempts to re-configure build trees of commercial builds
after the day of the first configuration do not fail anymore.
Task-number: QTBUG-63452
Change-Id: I42264f64d7621784d4d67bde885a8e501f5ca413
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The Xcode project name may be affected by e.g. the -o argument to qmake,
so we can't assume it's based on the target.
Change-Id: Ibb9f4265017ffcfe26bd8734758dcb30237c704f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: Ib22d2fdca6a4819c1b4056e3207940ceebfbe365
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts the following commits:
d12d2949d126c3bec09b49b08f96e8
We can't easily predict all code paths for QDesigner
with such a microoptimization. We also don't want
to generate three different string constructions
depending on some sophisticated heuristics.
[ChangeLog][uic] The -no-stringliteral option is now deprecated and
UIC will not generate QStringLiteral anymore.
Task-number: QTBUG-65251
Task-number: QTBUG-51602
Change-Id: I34a5a1934a8df19c5c84ac2ba8e5168ce5665037
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QMAKE_BUNDLE is set then this should be used for the bundle
identifier value instead of the product name. This ensures that when an
application provisioning profile is used that it will correctly match
against it. This also brings it in line with the documented behavior.
Change-Id: I627d212f59d862e7a881941748db5ef98ab4f463
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
the sysroot flags need to be established even before setting up the
spec, because as soon as that happens, toolchain.prf will try to
determine the default paths and cache them.
this also fixes sysroot use in toolchain flag support tests, which run
(somewhat) independently from the toolchain setup.
Task-number: QTBUG-63483
Change-Id: I7be1540e766dac58fb16f63176aa8d2879b51ae0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the callback is specific to qtbase/configure.json, so it belongs into
qtbase/configure.pri.
amends d90db0f136.
Change-Id: I905f985e2d3d2e42c4587cbacdea8dc3eb09a5be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As the comment says, Haswell is a nice divider and is a good
optimization target.
I'm using -march=core-avx2 instead of -march=haswell because the latter
form was only added to GCC 4.9 but we still support 4.7 and that has
support for AVX2.
This commit changes the AVX2-optimized code in QtGui to Haswell-
optimized instead. That means, for example, that qdrawhelper_avx2.cpp
can now use the FMA instructions.
Change-Id: If025d476890745368955fffd153129c1716ba006
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Tell qtwaylandscanner to export the symbols when we're building a
module. This is done by specifying the include directory on the
qtwaylandscanner command line.
Task-number: QTBUG-68773
Change-Id: Ib575222261831ab01eb43e6c7caefb07e314492b
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated headers can now be installed using inject_headers and private_headers
instead.
Change-Id: I51d98e2e05d12aa9f6ab09f8ccb12b81a0c0cd6f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
"AVX512MIC" (Many Integrated Cores) is the set of AVX-512 features found
on the Intel Xeon Phi coprocessors (codename "Knights Landing"), which
is an unlikely architecture for Qt to run on.
The two profiles with VL came from study of early GCC code and are no
longer applicable. GCC source code now shows both VBMI and IFMA as part
of the -march=cannonlake feature set.
Change-Id: Iff4151c519c144d580c4fffd153a0f268919fe2c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a partial revert of commit:6c5d227da1709eb81968823f38a133747c0e95b0
All credits to Martin Afanasjew <martin@afanasjew.de> for the original patch.
Change-Id: Ib66303505888c821fc43eca213b956ce76acbbfa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The macOS framework build of Qt copies headers to each
framework instead of a centralized include location.
Update the .pc file generator to match this behavior.
Add two include paths to the .pc files:
-Ipath/to/lib/foo.framework/Headers
This makes #include <FooHeader> work.
-Fpath/to/lib
This makes #include <Foo/FooHeader> work.
Task-number: QTBUG-35256
Change-Id: I013ce161c904fe6b7bbb03e33c163d32fdda0647
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If CONFIG option no_include_pwd is set, moc does not add the build
directory to its include path. The path to the generated
moc_predefs.h file is by default relative though, resulting in
moc warnings:
Warning: Failed to resolve include "debug/moc_predefs.h" for moc file xxx myheader.h
Fix this by always making the path to moc_predefs.h absolute.
Task-number: QTBUG-69087
Change-Id: I8ef79c8340f9ebd6b0bba15e026d65ef3c088535
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
By using -march= instead of -x, we turn on some other processor features
too. This was already the case for AVX2, which enabled all Haswell
features (notably FMA, BMI and BMI2).
Change-Id: If025d476890745368955fffd153126fc9eafc5d6
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
linux-icc and macx-icc toolchains contain a significant amount of code
which can be merged to a common configuration file.
as a side effect, such merge resulted in reduction a parts of
linux-icc and macx-icc toolchains to the common view.
Change-Id: I37d110734eeeb9bd61ca0aa942de380ac8e75f1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows distinguishing between these tools and tools for the host,
when cross compiling.
While mac tools normally only are available on macOS, there are third
party efforts to port them to other platforms. In these cases, it
might be useful to use a prefix (either some sort of triplet prefix,
or an absolute path) to distinguish between the host build platform
compilers/tools and the ones for the cross target.
The use of this variable matches the one used in a lot of other
mkspecs, and shouldn't cause any issues for those who aren't setting
it.
Change-Id: Iaeba571d955ea79ed1249989fcc525eb1eaf1f5c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Do allow people to build from git using the Qt License Agreement 4.0.
The license agreement text is the same as in the installers, except
that some Unicode characters got normalized to their ASCII variants,
and things have been properly wrapped.
[ChangeLog][Licensing] The commercial preview license in the git
checkout has been replaced by the Qt License Agreement 4.0 text.
This makes it explicit that commercial customers of The Qt Company
can use the git version under commercial terms. However, support
is (still) only provided for builds from released branches of Qt.
Task-number: QTBUG-52222
Change-Id: I9e99b68e236a09610b798ba7a841e5a9d1ce6898
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Perfectly valid C++11 code trying to default-initialize an object with
{} is being warned. GCC 5 and up only warn if you initialize some fields
and not others.
qcborvalue.h:68:25: error: missing initializer for member 'QCborError::c' [-Werror=missing-field-initializers]
QCborError error = {};
^
Task-number: QTBUG-68889
Change-Id: I6efb28c3145047559ec0fffd1538577de250e283
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
as evidenced by things actually still working despite qmake_use.prf
not processing *_CFLAGS, this is not relevant for any makeSpec sources
any more, and was never relevant for other non-pkgConfig sources to
start with. localizing the code cleans things up.
as a side effect, configure won't emit a notice for dropped flags any
more, but will only log them to config.log. i think that makes sense,
as for the average user that would be only noise anyway.
Change-Id: Iaffde6474b786f5cbcbeac881850792563b74495
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the json format uses single strings for library sources, as that leads
to less noisy source text. however, this implies the need for de-quoting
and subsequent re-quoting whenever the values are processed. so change
the internal representation to regular qmake string lists as the first
thing when processing the lib source, and re-quote only when outputting
the values.
CFLAGS are excluded, because we'll deal with them differently.
Change-Id: I4ab43d98085ea9f6601fd21ac2afb5bce4f7e2a9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
wayland-scanner.prf uses it as a trigger, so this is needed to make dynamic
non-prefix builds work.
amends 427e5d61b7.
Task-number: QTBUG-68773
Change-Id: Ia7d3bc39cb2b0f225e827f64eb17d061d594b265
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need -Zc:__cplusplus in order to enable the __cplusplus macro having
the correct value. This causes configure to now print:
Checking for C++14 support... yes
Checking for C++1z support... yes
and
Using C++ standard ..................... C++1z
Change-Id: I5d0ee9389a794d80983efffd152c95a4d9d8adbc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new build system in Xcode 10 requires outputs from shell script
to be explicitly declared if they are used by subsequent build phases,
otherwise the build system may attempt to search for the file before
it has been generated, causing the build to fail.
The build phase we use for Qt preprocessing (moc, rcc, etc), does not
list these output files, so we need to disable the new build system
for now.
Change-Id: I7404c19021f57489e985bd1203ad09ce9b83b090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
otherwise, names like "core" are too likely to clash.
note that the directories (which contain configure files) still need to
have unique names within one repository. that's unlikely to be a
problem.
Task-number: QTBUG-68385
Change-Id: I01c60479a6a45494ba60e798ceada231d8870556
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
making the dependencies on tools/ optional was meant to maximize build
parallelization, but it's just too fragile, as nobody ever remembers (or
even knows) about having to add the flags when necessary.
Task-number: QTBUG-68478
Change-Id: I85c0b65d5a63109aedc24bc17eaaaf46b777b634
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When QMAKE_TARGET_BUNDLE_PREFIX is set in the .pro file then
this value should be used instead of the default value for
PRODUCT_BUNDLE_IDENTIFIER. Therefore, PRODUCT_BUNDLE_IDENTIFIER
should be set inside default_post.prf so that it can take the
value of QMAKE_TARGET_BUNDLE_PREFIX after it may have been set.
Task-number: QTBUG-66462
Change-Id: Iec1e2a43632efe6021b9d6bfdb78bd941326c456
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
instead of pre-resolving them and passing the final LIBS to qmake, pass
raw QMAKE_*_LIBS* assignments and a QMAKE_USE stanza. the immediate
benefit of that is that it centralizes the debug/release lib handling,
which makes build variant overrides available to all libraries, not just
a few selected ones.
note that this removes the CONFIG+=build_all from the test projects.
turns out that this was ineffective to start with, as config tests are
built with an explicit CONFIG-=debug_and_release. we might re-instate it
in a non-broken way later on.
Change-Id: I2117c5b36937e8230bd571dcee83231515cbe30b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this de-noises the code somewhat, and makes it possible to eval() the
code generated by $$qtConfLibraryArgs(), which we want to do later.
Change-Id: Ib6101c6745101801e34f8fab1ad6651e624130c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add support for QSurface::VulkanSurface and QVulkanWindow.
Usage:
1) Build MoltenVK according to instructions
2) Configure Qt: ./configure -I /path/to/MoltenVK/Package/Release/MoltenVK/include
3) export QT_VULKAN_LIB=/path/to/MoltenVK/Package/Release/MoltenVK/macOS/libMoltenVK.
Implement support for QSurface::VulkanSurface by enabling
layer mode for QNSView and then creating a CAMetalLayer,
which the MoltenVK translation layer can run on.
MoltenVK provides an implementation of the Vulcan API,
which means that the platform integration is similar
to other platforms: implement a QCocoaVulkanInstance
where we pass the QNSView instance to the vkCreateMacOSSurfaceMVK
Vulkan surface constructor function.
Using Vulkan directly without QVulkanWindow is possible, but not
tested.
We currently load libMoltenVK at run-time and use the
existing QT_VULKAN_LIB environment variable to set its
path. For deployment purposes it would be better to
link against MoltenVK.frameworkm, but this
Task-number: QTBUG-66966
Change-Id: I04ec6289c40b199dca9fed32902b5d2ad4e9c030
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
relative paths must be resolved against $$OUT_PWD, not $$_PRO_FILE_PWD_.
Task-number: QTBUG-58991
Change-Id: I9ce8e9c78e0fad026a7cc355852d23f9d6e96ee6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Add qmake feature and configure option, which optimze the size of static
exectuable. Use for static build.
Enabled via configure --gc-binaries, or CONFIG += gc-binaries in 3rd party
projects.
Change-Id: I3c25b02caaef6a4afc6019afc9c67122dd11696d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need to make sure we don't emit CMake declarations for private
headers if those headers are absent. However, most of the time we have
private headers and should add them.
Task-number: QTBUG-37417
Change-Id: I639eb93d008de27928dedac540894af70c1883b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Writing out the $TARGET_plugin_resources.cpp file in !build_pass breaks
when TARGET is adjusted by $qtPlatformTargetSuffix values. We end up
writing out $TARGET_plugin_resources.cpp but the debug Makefile looks
for $TARGET_debug_plugin_resources.cpp.
Try using the pro file name as name source instead, as suggested by
Ossi.
Task-number: QTBUG-67931
Change-Id: I221cf9b2ec1db699568d0c73513aa66ecf0ada97
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
don't put them into GENERATED_HEADER_FILES, as they obviously cannot be
found in a pre-synced source dir. instead, let the injection code itself
add them to INJECTED_HEADER_FILES.
Task-number: QTBUG-67813
Change-Id: Id2a7c565b14fcba8aba9d1dd8b1dd39c586d0d91
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
these are actually redundant with INJECTIONS.
Change-Id: I0a71930401e00d30c9898b4d958de5e89c496d18
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
RCC generates code that registers resources automatically on program
startup via global constructors. When linking statically and nothing
references the symbols in the .o file compiled from the RCC generated
code, then the linker will discard the embedded resources and they will
not get initialized. That is why for static linking it is necessary to
explicitly initialize resources using the Q_INIT_RESOURCE macro.
We can avoid the need for the explicit initialization in the context of
plugins that are statically linked into the application. resources.prf
can generate a .cpp file with a helper function that contains all the
Q_INIT_RESOURCE calls for all resources in the plugin. That helper
function in turn is injected into the plugin entry point, which in turn
is guaranteed to be included in the final binary.
Change-Id: If1abf9c85ef92935020af073b989c58c1ae6ca63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the 'info' variable was re-used too early. make a new one 'infoargs'
instead.
Task-number: QTBUG-67286
Change-Id: I77881ecbfce338d653358c5e5edac84e1c0c7de3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In order to be able to build and test a testcase on an iOS device it
needs to be a bundle. So the app_bundle config should only be removed if
the testcase_no_bundle is set. This is already done by testcase.prf.
Task-number: QTBUG-45211
Change-Id: I4f16ea832ccff2a5db5fed0050fa0344b4ac9ad6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The android mkspecs had their own way of doing the same as optimize_size
Change-Id: Id05822df6bdeb8b3aafada2901bd61530c490fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
instead of relying on more or less accidental qmake behaviors regarding
the base dir for relative paths (esp. if a file does not exist yet),
make everything explicit. to that effect, clearly define the base tree
(source or build) for every syncqt-generated variable, and write only
in-tree relative paths to the variables. on the receiving end, resolve
the paths as soon as headers.pri was read.
Task-number: QTBUG-67111
Change-Id: I32ae5760fb62ebc650fdb69e46aac786a8141564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
that way we can create a config.log which is consistent with the end
state even if (some) tests are not executed this time around.
Change-Id: Ia953ede62d6640aab912559f435ceb1f9ec6d9dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove references to XKB and explain what to do if
pkg-config is missing or unwanted.
Change-Id: I099bf01ff49e1b8f6e822a50f0fe4904965a7a9f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some mkspecs do not support c++ strict mode.
We should allow them to build Qt with GNU extenstions.
Change-Id: I0d76cf95355b38953e3475773ec5474c856e1370
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Allow QML modules to request installing QML files on the file system
regardless of whether the QML files are embedded to resources.
Qt Quick Controls need both; external QML files, that are prioritized
over compiled resources, can be left out from the final deployment
package.
The desired setup can be configured as follows:
CONFIG += install_qml_files builtin_resources qtquickcompiler
With this, there is no need to write custom install/copy/qrc rules
for QML files.
Change-Id: I2ff2974b64efaea341b6ebb4c9fc2612497d7a33
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For "import MyModule", the QML engine looks for a qmldir file in
$eachImportPath/MyModule.
One of the built-in import paths is ":/qt-project.org/imports". This is
meant for static "plugins", where the resources and the plugin are already
inside the binary image.
For dynamic plugins, the qmldir file is what enables the QML engine to
find the plugin in the first place, so it makes no sense to embed it
inside the plugin's resources.
Change-Id: I29f006efb58d91f7e5212c347087535b06e8c637
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For correct debug/ and release/ suffix substitution and thus avoid
concurrent access to generated files, we have to declare the output
directory variable used by qtquickcompiler.prf in qtdeclarative here and
enable it for substitution.
Change-Id: Id8483daffdf1b9990396c55f7bc0d08a2f65cafd
Task-number: QTBUG-66675
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The change causes a crash when compiling the xkbcommon 3rdparty
library and compile failures (qtimageformats on Android).
This reverts commit a47cb14680.
Task-number: QTBUG-67326
Task-number: QTBUG-67327
Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated files should be added to RESOURCES with an absolute path.
Task-number: QTBUG-67011
Change-Id: Ief82b576824df9abd0901970f076e30dfe57b7d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When Qt is configured for both debug and release, and frameworks are
enabled, we produce two dynamic libraries inside each framework, eg:
QtCore.framework/QtCore
QtCore.framework/QtCore_debug
When building an executable against these frameworks, we pass -framework
QtCore, and the resulting executable will have its LC_LOAD_DYLIB load
commands pointing to e.g.:
@rpath/QtCore.framework/Versions/5/QtCore
When running the executable, the dynamic loader will load the dynamic
library dependencies based on these load commands.
By setting the DYLD_IMAGE_SUFFIX environment variable at runtime to
'_debug', the dynamic loader will prefer the debug versions of each
library inside the frameworks.
Unfortunately the use of an environment variable to choose debug or
release versions leaves room for mismatches between the executable
and the libraries that are loaded. An executable built in debug
mode will at runtime pick up the release versions of the Qt libraries
unless the DYLD_IMAGE_SUFFIX has also been set to match the build
configuration of the executable.
This results in confusing situations such as building your application
in debug mode, and then stepping into Qt code but not getting any
symbols. Qt Creator has an option to run the application with
DYLD_IMAGE_SUFFIX set, but this is not enabled by default due
to the startup cost of loading the Qt debug libraries.
More critically, it results in tests failing when the tests are using
QTest::ignoreMessage to ignore warnings produced by Qt, and these
calls are ifdefed (correctly) inside QT_NO_DEBUG, as the test
(built in debug mode) will then expect warnings from Qt, but those
warnings are not emittet, as the test is run against the release
version of the Qt libraries.
To mitigate this mismatch, we now link the Qt frameworks using
an explicit suffix, just like we would for no-framework builds
on macOS, for debug and release builds on Windows, and for
normal builds on other Unixes, leaving the dependency chain
for the application predictable:
@rpath/QtCore.framework/Versions/5/QtCore_debug
This also conceptually matches how Xcode builds applications and
frameworks, where it never relies on DYLD_IMAGE_SUFFIX, and instead
uses two separate build directories, one for each configuration.
The change means that Qt Creator will always load the Qt debug
libraries if the application is built in debug mode. For Qt
development this is a good thing, as you expect to be able to
step into Qt code. For our users, the added startup cost can
be mitigated by shipping our binary packages as release-only,
but with separate debug info enabled.
Change-Id: Ib9f1f2dab90ed00b9fb011200e3a69c71955e399
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Some tests are not written to handle running on a retina screen,
resulting in additional test failures when trying to fix a CI test
failure on a local retina-enabled machine.
Change-Id: I0fed33c38792b686ac83abba2bfbc45623382200
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On Apple OSes, both compilers and linkers are given an absolute path.
For consistency, the same should be done with the C linkers.
The change is also a convenience to the MacPorts project,
which actively discourages ambiguous compiler names.
(https://trac.macports.org/wiki/UsingTheRightCompiler).
Change-Id: Ic1885aed825340696e9fde766788eebf51de3ff6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I7d5f211e2441415134c5905b159b41dc3b2b231b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is needed to be compatible with latest Qualcomm BSP releases.
This patch also makes it possible to select HW layer via
QT_OPENWFD_CLIENT_ID and QT_OPENWFD_PIPELINE_ID environment variables.
Change-Id: Ie795b21afc61a1de7c1d0b52cdb30a754e3f8266
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit 00f693d3e5046999270c92731e34a3e7fcd01c6b)
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and make use of it.
it's a logical continuation of the 'arch' term, and will be used also in
qt3d's configure.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I940917d6763842499b18fffd1514c96889a0cc63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
with 40e87491 merged, 'QMAKE_CXXFLAGS' variable in
'win32-g++' toolchain became defined via 'QMAKE_CFLAGS'.
the similar can be found in 'win32-clang-msvc' and
'win32-icc' toolchains too.
this works for now, because such definitions just duplicates code
from includes, like 'gcc-base.conf', 'msvc-desktop.conf', etc.
but it would became broken, if changes would be applied to
'QMAKE_CXXFLAGS' definitions in that includes, prior
to the redefinitions in 'win32-*/qmake.conf' toolchains.
thus 'QMAKE_CXXFLAGS' definitions in 'win32-*/qmake.conf' toolchains
should not depend on 'QMAKE_CFLAGS' and be done explicitly.
in order to apply this change correctly to 'win32-icc' toolchain,
its 'QMAKE_CFLAGS' variable should become dependent on definitions
in the includes, similar to 'win32-clang-msvc' and
'win32-msvc' toolchains.
Change-Id: I5e820e44a769a590ba63f70dcb3a115311093311
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
contains() interprets the regexp as being implicitly
anchored, so the leading part of the path needs to be
explicitly matched.
Change-Id: I1efa07dc99bb2db1717d2a66621899e23c144164
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
$$RCC_DIR can be absolute, so simple concatenation with $$OUT_PWD is
bound to fail.
Change-Id: Ibd80c49656c0e03b8a86ebca851af106cced08fb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in non-prefix configs, one has to differentiate between the module's own
build dir and qtbase's build dir, because the forwarding headers are
placed in -outdir under include/, while the actual headers end up in the
real build dir under src/.
Change-Id: I1d8ac904556b354bd113995316ba11dd6560a70d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Right now we are using the C++ compiler here, which relies on
the compilers automatically switching mode. This behavior is also
deprecated in newer clang versions and block clang developer
builds.
Task-number: QTBUG-64822
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I4d3c00ac528a45934c85777f42d243d0fe367c92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This commit introduces minimal support for instrumentation within Qt.
Currently, only LTTNG/Linux and ETW/Windows are supported.
Change-Id: I59b48cf83acf5532a998bb493e6379e9177e14c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
'win32-icc' toolchain:
- remove duplicated angle/vulkan includes.
'win32-g++' toolchain:
- place angle/vulkan includes before the unrelated compiler-related
variable re-definitions, similarly to the 'win32-clang-msvc',
'win32-icc', and 'win32-msvc' mkspecs.
Change-Id: Ie04bc9fb1d51ec0366b42713439f680e51214bbc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The PRODUCT_BUNDLE_IDENTIFIER property was not defined in the Xcode
project file and therefore the build would fail.
This fixes a regression introduced by 0749ba2c5e.
Task-number: QTBUG-65673
Change-Id: I8089b36d86588223ec34859af7388c99a3574d8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Build systems such as Meson heavily rely on pkg-config to get build
flags.
-DQT_{module}_LIB isn't exported in .pc files which makes Meson unable
to build some codes out of the box.
Change-Id: I806998f19f815e05a47b60129977e52587b38d47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
mingw-w64 toolchain:
- remove 'QMAKE_CFLAGS_AESNI' and 'QMAKE_CFLAGS_SHANI' definitions,
which are already set in 'gcc-base.conf' toolchain; this is
a continuation of 77347a36 relating variables, introduced in 5.10,
- remove 'gcc-base.conf' duplicate inclusion, left after eef2d1af
was merged into 5.10.
Change-Id: I328def916ccfb93c3f6b8336eb8801defbac37ae
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
such a project structure violates the assumption that the referenced
resources are specified relative to the sub-project root, so we must
resolve them to absolute paths manually.
Task-number: QTBUG-65753
Change-Id: I8bcd5c6e7d7c6a713e5fcd3668be7d2f23169501
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
mingw-w64 toolchain:
- add missing compiler definitions, similar to
'msvc-desktop.conf' toolchain,
- describe the reasons of missing compiler definitions, available in
'msvc-desktop.conf' toolchain,
- add missing 'QMAKE_CXXFLAGS' and 'QMAKE_CXXFLAGS_WARN_ON' variables,
similar to 'msvc-desktop.conf' toolchain.
ICC on Windows toolchain:
- add 'QMAKE_CFLAGS_OPTIMIZE_FULL' variable, similar to 'gcc-base.conf'
toolchain, though left it unused for now,
- add missing flags to 'QMAKE_CFLAGS' variable, similar to
'msvc-desktop.conf' toolchain,
- update deprecated 'Qwd' flag with 'Qdiag-disable',
- use 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable instead of '-Od' flag,
similar to 'gcc-base.conf' toolchain (ICC implies '-O2' optimization
level by default, while MSVC implies '-Od'),
- add 'QMAKE_CFLAGS_UTF8_SOURCE' variable, similar to
'msvc-version.conf' toolchain; use a workaround to initialize it,
until '-utf-8' flag would be supported by ICC on Windows,
- update deprecated '-Qstd=c++1z' flag with '-Qstd=c++17',
MSVC toolchain:
- remove 'incremental' from MSVC 'CONFIG' variable, since it has
relevance only for the Unix generator,
- add 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable, used in ICC for Windows
toolchain,
- add empty 'QMAKE_LIBS' variable, similar to 'win32-g++' toolchain,
- add 'uuid.lib' library to 'QMAKE_LIBS_GUI' variable, similar to
'win32-g++' toolchain,
- add C++14 and C++17 language support flags, though left them disabled
for now, similar to 'win32-icc' toolchain.
Change-Id: Ideef62d0422674184836faa655bfc5d09a5f612f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
otherwise the project would need to clear QT despite using
qtHaveModule() in requires() (or REQUIRES=).
Task-number: QTBUG-65106
Change-Id: I568202214c8eafcdbe2d0e253b18f0e171293aff
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Old header.LGPL21 header was used at some files. Replase those with
new header.LGPL one
Remove old header.LGPL21
Task-number: QTBUG-57147
Change-Id: I650e39024ed4876bba27e954c7d61fdb025b46ef
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This ensures that the same set of variables can be successfully replaced
in both the Makefile and Xcode generators. It also switches the default
templates to use the Xcode-style ${var} syntax instead of the @var@
syntax for better Info.plist compatibility across generators.
Change-Id: Iff330bafd152773aafac9143c4a34e34f92f0ce6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since Xcode 6.3, this must be set to NO because stripping on copy is no
longer fully supported due to the potential of input binaries being code
signed. In this case Xcode will simply ignore the strip step and issue
a warning since stripping would invalidate the code signature. This
change silences that annoying warning for release builds. Also, the
setting assignment is moved from being hardcoded in the generator, to
a QMAKE_MAC_XCODE_SETTINGS value.
Change-Id: If25511edddc12b7b0407e2992d80884b7d6437dc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Common changes to mingw-w64, ICC on Windows, and MSVC toolchains:
- set similar order of variables and its splitting into sections,
- set similar order of flags in variables and the way they are set.
mingw-w64 toolchain:
- move 'gcc-base.conf' include before setting Windows specific
flags, similar to include 'msvc-desktop.conf' in ICC on Windows
toolchain; this leads to consistency with other toolchains
and allows to safely override common GCC variables with Windows
specific ones, when needed,
- move 'QMAKE_EXT_OBJ' and 'QMAKE_EXT_RES' variables to the linker
flags section, according to its purpose.
MSVC toolchain:
- set flags order in 'CONFIG' variable, similar to mingw-w64 toolchain.
Change-Id: I417cc8f7959c669dd504f2c5c11eb879a7989bd4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
mingw-w64 toolchain:
- remove 'QMAKE_CXXFLAGS_THREAD' variable definition, since
'QMAKE_CFLAGS_THREAD' variable not set for mingw-w64 toolchain.
ICC on Windows toolchain:
- remove 'QMAKE_LFLAGS', 'QMAKE_LFLAGS_RELEASE',
'QMAKE_LFLAGS_RELEASE_WITH_DEBUGINFO' and 'QMAKE_LFLAGS_DEBUG'
definitions, since they're properly set in 'msvc-desktop.conf',
- remove 'DSP_EXTENSION' variable, which doesn't occur anywhere else
within QtBase; its most recent search results relate to
Visual Studio 6.0 and Intel Fortran.
Change-Id: I2ce5c2c9e9ca2c09c1acfcf8c60381d318e8e380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the linker supports it, add the gdb index to the debug symbols, which
makes loading gdb on Qt libraries much faster.
Change-Id: I2ed201c22913b97ac2efaefb5e31636e795ae102
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This works around the inability to build iOS apps for a "generic"
simulator by explicitly setting the Xcode build setting
ENABLE_ONLY_ACTIVE_RESOURCES to NO in order to ensure that all variants
of assets in an asset catalog are built when targeting iOS simulator
devices. Otherwise, we will simply build for whatever the first
simulator in the list happens to be. If the application is then deployed
to a different simulator, some of the assets needed for that device
variant may be missing.
This "helps" QTCREATORBUG-19447 but is not a workaround since this fix
is necessary for command line builds anyways, even though it's unlikely
to crop up in practice there, since one would have to manually deploy
the built application bundle to the simulator using simctl rather than
going through Xcode (which would rebuild for the appropriate device).
Change-Id: Ia41c48dcc715fe79a2c50db66a0ca7a1fea159c2
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... instead of only toolchain.prf.
the license check could go haywire, and everything else that file does
is meaningless in configure context anyway.
Task-number: QTBUG-63452
Change-Id: I5e31c87fe717fda40978c0317556070637e537e2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise test de-duplication between modules doesn't work.
Change-Id: I2c6222d853108df223758aa8907dc8d004efd87f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
especially during debugging, it is often necessary to re-run only one
(or a few) tests, where -recheck-all would be wasteful.
Task-number: QTBUG-64059
Change-Id: I9410894dec4289ff832d7f75e04f9b60fe76c57c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Enable xcb QPA plugin when XQuartz is available. This is done
in a single build, alongside the Cocoa version.
We delegate part of the configuration stage to pkg-config, so
this becomes a requirement. Ensure that
PKG_CONFIG_PATH=/opt/X11/lib/pkgconfig:/opt/X11/share/pkgconfig
is in your environment, or pkg-config is properly set up.
Tested with the following configure options:
configure \
-pkg-config \
-fontconfig -system-freetype \
-system-xcb -xkb -no-opengl \
-qt-xkbcommon -qt-xkbcommon-x11
Change-Id: I2eb5a0491172368afc4c629c540cbef08580348d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
it could be somewhat surprising that specifying variant-specific libs
would not clear the common libs, so do that. of course, the default
for the common libs could theoretically contain common deps of the
variant-specific libs, in which case clearing them would be surprising
in turn - luckily, we have no such case.
Change-Id: Ifca08b9e1949c6a0cefed6931ade4021927d7c90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... and not only when the source explicitly specifies build variants.
Change-Id: Iac6c8fda8f431d5fb50fada8338d1b660ab040d7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
unlike for the other fields, we forgot to eval() the values of the
build-specific library values, leading to over-quoting of values which
require any quoting at all.
amends c0cc50520.
Task-number: QTBUG-62521
Change-Id: I4dfce31040dd09248d3f9dd4294f7fb147c13bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
qtConfLibrary_inline() used to set $${1}.builds.$${b}.libs, while
everything else assumed no such .libs suffix. fix the former.
amends 9172143f52.
Task-number: QTBUG-61431
Started-by: Konstantin Ritt <ritt.ks@gmail.com>
Change-Id: I0bd81591c46266d81baa9c12315411183bbc7a63
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It seems the compiler supports /arch:AVX512 and /arch:AVX512F but none
of the other switches (and neither are documented). And when you pass
those, you also get Conflict Detection (CD), Double & Quad (DQ), Byte &
Word (BW) and Vector Length (VL), which matches the ICC switch
"-xCORE-AVX512". Unlike ICC, there doesn't seem to be an option to
enable only the common part of AVX-512.
Support for Intel Xeon Phi's current features (Exponential &
Reciprocation and Prefetch) and future ones (IFMA, VBMI, 4FMAPS, 4VNNI
and VPOPCNTDQ) seems to be missing altogether.
See https://blogs.msdn.microsoft.com/vcblog/2017/07/11/microsoft-visual-studio-2017-supports-intel-avx-512/
Change-Id: I98105cd9616b8097957db680d73eb1f86e487e6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Common changes to mingw-w64, ICC on Windows and MSVC toolchains:
- update toolchains description similar to 'gcc-base.conf'.
Change-Id: Ie456c6cec86c0d1c0107ca84a0fa7855666df91e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For source packages that don't have a .git subdirectory, syncqt is
executed before configure, with outdir set to srcdir, and this
caused path misalignments for injected headers in qt_module.prf
when generating makefile rules.
The fix is to change syncqt to always output injected header
paths relative to the source dir.
Task-number: QTBUG-64539
Change-Id: Ia2296e44494093dbf124729062f430ad6fca7262
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes an issue where a build error may be introduced by a simulator
being selected whose OS version is lower than the application's
minimum deployment target.
Task-number: QTBUG-64456
Change-Id: Ic7c834a1473c183ebb910bc01a416fe1e23a5a14
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to know when a plugin uses deprecated Qt APIs, especially
deprecations in the QPA APIs, which today is not the case, so
platform plugins have no idea that they should transition.
Change-Id: If9d3d95dc6f1f4178b103f177c9eb8326767ffab
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Xcode 9 introduced the main thread checker, which detects invalid
use of AppKit, UIKit, and other APIs from background threads.
https://developer.apple.com/documentation/code_diagnostics/main_thread_checker
In our case these are accesses to e.g. [UIView layer] and
[UIScreen scaleFactor] from the render thread of QtQuick,
things we should look at, but that might not be easily solvable.
In any case, these are not warnings the user can do anything about,
so in lack of a per-library disable of the checker, we have to
globally disable it for the whole Xcode project.
Task-number: QTBUG-63822
Change-Id: Ibfcdf23891cf6bfbbc9b9b3349e4c256c273c7de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Bundle data source files which don't exist at qmake time need to be
handled specially. This also required splitting the generated list of
public headers, as was already done for private ones.
Task-number: QTBUG-60413
Change-Id: I97acfa88622da6b73839b8f976f73ace3cb10223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This warning used to be part of -Wconversion, but that generates too
more noise than we're willing to fix now (like conversion from qint64 to
int). The float conversion does trigger for conversion from double to
float, as shown in all the QVectorND uses of float, but more
importantly, it triggers on passing floats to ints.
Change-Id: I69f37f9304f24709a823fffd14e69cfd33f75988
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
I need to include linxx/if.h from elsewhere and these two files conflict
by defining the same types (struct ifreq, struct ifmap, struct ifconf,
etc.)
Change-Id: I0a103569c81b4711a649fffd14eb2f6dbbef83b6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
[ChangeLog][iOS] The minimum deployment target for applications is now
iOS 10.0.
Change-Id: Icb37e4eaecbf6f62fd3c9293b2abf19a0954a02d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This guarantees that we have proper version checks in place for APIs on
Apple platforms that are not necessarily available on the deployment
target.
Change-Id: I10060f8b910f2bb790aa4a9c6f8c5cdc14d7cf06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This definition causes a build error if concrt.h is included.
According to Microsoft [1], this macro is unsupported. It was added in
f5908363 to silence compiler warnings that are generated when exceptions
are turned off and certain STL headers are included.
We specifically disable the warnings in question now.
[1] https://blogs.msdn.microsoft.com/vcblog/2015/07/14/stl-fixes-in-vs-2015-part-2/
Task-number: QTBUG-63409
Change-Id: I567d5d46292fbd7898394e217bb0987fbcdca9de
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We obviously should check the variable we're about to get the data from.
Amends 1216f596bd.
Change-Id: Ibe87138b9c9aa99837b4fbf3769cd26ca1aaacb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If MOC_INCLUDEPATH exceeds a certain limit, its content is written into
a file named mocinclude.opt, which is then passed to moc as a response
file. That moc parameter was not properly quoted, and the moc call
failed for paths containing spaces.
Task-number: QTBUG-63197
Change-Id: Ib0542d80ce1bab239e0e6b6e24fadd11007b1846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Amends cab060631
Task-number: QTBUG-62995
Change-Id: I374153ec34abad0585d2bcab0f699b42600be6ef
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This change adds the correct suffix to debug mode .pc filenames for
MinGW and also to the Qt libraries listed in the `Requires` field.
The filename adjustment fixes the accidental overwriting of release
mode .pc files with the debug mode variant which required the wrong
variant of the libraries when `debug_and_release` is active.
Note that macOS also supports the `debug_and_release' configuration
but may use the regular library names together with DYLD_IMAGE_SUFFIX.
Creation of *_debug.pc files is turned off as they're identical to their
non-debug counterparts.
[ChangeLog][Platform Specific Changes][MinGW] Added a suffix to debug
mode pkgconfig files.
Task-number: QTBUG-4155
Change-Id: I221c2dae51d7bd011836cb03945631a43180d7b5
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][configure] Added the configure option -qtlibinfix-plugins
to rename plugins according to QT_LIBINFIX. This option is off by
default.
Fixes: QTBUG-15192
Change-Id: Id5b267e169ee143fc8f7abc6b27bc0ed5306406f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QtANGLE is set on MODULE_AUX_INCLUDES so the headers can be found when
building with ANGLE (gui.pro) but the pkg-config file is missing this
header and the Qt headers cannot be compiled with the path from this
config.
Fixes: QTBUG-75495
Change-Id: I4d795b3495b8d08c65f9ddffad4fc838b4f04c31
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QT_DEPRECATED_VERSION(major, minor) and
QT_DEPRECATED_VERSION_X(major, minor, text) outputs a deprecation
warning if QT_DEPRECATED_WARNINGS_SINCE is equal or greater than the
version specified as major, minor.
This allows the user to hide deprecation warnings which can't yet be
fixed for their codebase because the minimum required Qt version does
not provide the replacement function.
If QT_DEPRECATED_WARNINGS_SINCE is not set by the user, it's set to
QT_DISABLE_DEPRECATED_BEFORE if available, otherwise to QT_VERSION.
[ChangeLog][QtCore][QtGlobal] Add new macros QT_DEPRECATED_VERSION
and QT_DEPRECATED_VERSION_X to conditionally display deprecation
warnings
Change-Id: I61b1a7624c9b870695c9e3274313de636f804b5d
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Before testserver becomes a stable feature, let's keep testserver.prf in
"mkspecs/features/unsupported". The test server's shared files will be
stored in "mkspecs/features/data/testserver".
Because the path of testserver has been changed, all the tests relying
on the docker servers should be updated as well.
Change-Id: Id2494d2b58ee2a9522d99ae61c6236021506b876
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Pass it through as a traditional clang argument instead of relying on
what MSVC cl.exe can take.
Change-Id: I94405ce6ab80d16b687e62c9aa4b2866ba84f0e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Configure will print notes in the following situations:
- redundant options, e.g. -gui -gui
- contradictory options, e.g. -gui -no-gui
Fixes: QTBUG-53499
Change-Id: I6cf023e7730907069cf971f5982a41453f611c3c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
In release mode, MSVC linker will enable it by default
while clang-cl won't. So enable it explicitly.
Change-Id: Iabfd8698d426290fee59662acf6c124b9f226c11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This removes the pre-dexed JAR files activated by the absence of the
bundled_jar_file CONFIG option, as versions of Android >= 5 no longer
support this deployment mechanism.
Now, the "bundled" JARs simply become normal JARs containing class
files, and are neither activated by a bundled_jar_file CONFIG entry nor
do they have a -bundled suffix in the file's base name.
Task-number: QTBUG-62995
Change-Id: I3fa6819259be365b7a697f7db1d1d01a94032395
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Enabled via configure --ccache, or CONFIG += ccache in 3rd party
projects.
Ensures that we use the right sloppiness and other ccache options
during compilation.
Task-number: QTBUG-31034
Change-Id: I696b3d3f0398873a29b93d1bc2b4d4e06ef23dc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Define the lib dependencies for corelib in corelib.pro, where they
belong.
Change-Id: I973d3b0c571782d869b27dea243e899db4dddc43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When a ObjC++ QObject subclass is listed in the regular HEADERS, qmake
creates a .cpp file. The moc file will then fail to compile, as it
requries ObjC++ headers. Using Q_FORWARD_DECLARE_OBJC_CLASS() can be
used to let the class be parsed by The compiler, but link will still
fail, as the generated methods (e.g. signals) must be built with ObjC++
compiler, in case they have ObjC parameters:
Q_FORWARD_DECLARE_OBJC_CLASS(NSString);
class MyClass: public QObject {
Q_OBJECT
signals:
void objcSignal(NSString * myObj);
};
The canonical workaround for that is including the .cpp file into the
corresponding .mm file. This also offers a compilation speed advantage,
but is somewhat counter-intuitive.
Therefore, we introduce a separate variable which instructs moc to create
.mm files directly.
Task-number: QTBUG-1581
Change-Id: Ia98af58006efd168ea37f3a63c396979e7e81baa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
clang+libc++ is the only supported way by Google nowadays.
libstdc++ is too old and already fails to build some C++11 apps
e.g. missing std::to_string().
android-g++ mkspec still uses libstdc++ and g++.
Use -isystem to include system headers instead of QMAKE_INCDIR_POST (-I).
Task-number: QTBUG-60455
Change-Id: Iba8b04594c2e5e2832e6cf480e4e52ff31ad4106
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Otherwise 3.8.1 is treated as not recent enough than the required 2.8.3
Change-Id: I198fc7d54e3da935fd163c9b9bb7dc12b986d1c2
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
So far this only covered the QT_xxx_LIB define, but not any other defines
a module might export (such as QT_NO_QML_DEBUGGER which hasn't been ported
to the new configure system yet).
Change-Id: I8aae2354fed77a6f0e527ad8d63d25654bb067d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
doing so is somewhat likely to cause follow-up issues, as it turns the
source tree into a build tree as a side effect.
note that this change does not affect building examples inside an
install tree, even if doing that is still ugly.
Change-Id: I386bf2ab959269f55553c70b7551dd9afec2bcba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt_example_installs.prf is loaded by every sub-project inside the qt
tree, as qt_build_config adds it.
Change-Id: Ice7e81b280b6964ed5cc1b9f1501bf74df737d7e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
don't complain about library inline sources which have 'builds' but no
'libs'.
Task-number: QTBUG-62150
Change-Id: Ib215d438fc02ebdafde95f31cd48088b1bafc663
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
there doesn't appear to be a reason for the former complexity.
QMAKE_CONFIG_LOG was already assigned the simple way.
Change-Id: I6b7e3b5b97c7647237841fa5e16c4959079edc16
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's unclear where to look for the error when the message talks about
'g++' when '${CROSS_COMPILE}g++' would have been expected. help it by
saying whether it was supposed to be the host or target compiler.
this also centralizes the error emissions in a function.
Change-Id: I454c6ff7c0e7dd945dcee0de01e2818caeeb7409
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Replaced dependency to libdl.a with libshm_client.a. Defined symbols
'shm_area_password' and 'shm_area_name' internally. The build for
INTEGRITY is static only so libdl.a is not needed.
Change-Id: I7e34528835132d79ea582a30cf9ff61cdda198da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will allow Qt Quick applications to use the integrated GPU on
compatible Apple hardware, which helps preserve battery life.
Change-Id: I9224bd408930e2ed3dd8a022432512e78d69c195
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes editing the templates easier since they can be read
alphabetically.
Change-Id: I6af5e4f13718ba1145c2dec1f8a05bc600ea937a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... and use it when building shared libraries and plugins.
It prevents application crashes in cases when libraries and
plugins are unloaded and their strings are still used by
the main application.
Task-number: QTBUG-51602
Change-Id: I4af79183f18c5ed6142d55af02a36fe4334f3fee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We're adding a lot of unnecessary files that end up later as cargo-cult,
for at most a handful of lines. So instead move the testcases directly
into the .json file.
The following sources were not inlined, because multiple tests share
them, and the inlining infra does not support that (yet):
- avx512
- openssl
- gnu-libiconv/sun-libiconv (there is also a command line option to
select the exact variant, which makes it hard/impossible to properly
coalesce the library sources)
The following sources were not inlined because of "complications":
- verifyspec contains a lengthy function in the project file
- stl contains lots of code in the source file
- xlocalescanprint includes a private header from the source tree via a
relative path, which we can't do, as the test's physical location is
variable.
- corewlan uses objective c++, which the inline system doesn't support
reduce_relocs and reduce_exports now create libraries with main(), which
is weird enough, but doesn't hurt.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ic3a088f9f08a4fd7ae91fffd14ce8a262021cca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For clang -Os is very similar to -O2 and doesn't really reduce size much.
-Oz is usually what you want to use with clang for code reduction.
Now clang binaries are only 9% bigger than gcc's, instead of 22%.
Change-Id: Ib0ba560be26db68aeb21c13df4b151b7fbd81431
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Move the logic to set default values for VERSION,
QMAKE_TARGET_DESCRIPTION to qt_app.prf. This way,
a lot more executables get sane defaults.
Change-Id: I8394418c118a8877cec792eddc8894397c0fbf2d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make the tool description even simpler so that e.g. moc shows up as
"Qt Moc". The 'description' is shown in various places as the mere
title, so it shouldn't be too verbose.
This augments change ad68bf51e7.
Task-number: QTBUG-61970
Change-Id: I4b30b95a10d597a9a8a2c388c2381ea38a340be6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Instead of expanding the VULKAN_SDK environment variable at Makefile
processing time, expand it at qmake time, so that a resolved include
path is passed to WebEngine's build system GN.
Task-number: QTBUG-61823
Change-Id: I63bd661350883d22af2ccdeb7c360ed0d8d881c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Change f046ed395a set the default values of VERSION and
QMAKE_TARGET_DESCRIPTION for Qt tools to generic ones. The version and
description is shown in the properties of the executable, but also
used for crash reports. For the latter it wasn't clear anymore which
tool actually crashed.
The patch therefore adds the executable name to the generic description.
Tools can still overwrite the description on their own.
Task-number: QTBUG-61970
Change-Id: I8366db22f88f0d6575e7f482f030b3c4f05af6c5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
silent.prf modifies the compiler commands by prefixing them with a
silencing echo command. For MSVC, the used $< syntax is only valid in
inference rules. However, the PCH rule is not an inference
rule and breaks when silent.prf is used.
Remove the echo command for MSVC. The compiler already outputs the
currently compiled file. There's no need to do it twice.
Task-number: QTBUG-61688
Change-Id: I7e2c1211e471c9c149c16cac8e87406e88ee2d97
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The script will look for the most recent Qt Creator version on the system,
and pick up the LLDB summary providers from there, allowing pretty-printing
of Qt types inside LLDB/Xcode.
LLDB will detect the file when loading the dSYM, and inform the user that
the file can be loaded to enable the formatters. The script can be loaded
automatically by adding the following setting in ~/.lldbinit:
settings set target.load-script-from-symbol-file true
Which comes as a slight security risk, as other libraries might have
scripts of their own. The alternative is to load the script directly
from ~/.lldbinit:
command script import "<path to debug script in dSYM>"
With an optional target.load-script-from-symbol-file set to false, to
silence the warning when loading the dSYM bundle.
Change-Id: I01ba51dab725a8d0a58f1ad1749742443b639cc5
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With 4183475080, Qt fails to build if
qmake is unable to detect the compiler's default include and
library search paths. Clang on non-Darwin systems was missing working
code for the detection.
Unlike GCC, Clang on its own does not print the library search paths
when called with the -v option.
On Darwin, the -Wl,-v option will reach ld64, which will print those paths.
However, neither GNU ld nor gold will print anything useful with just
-v. GNU ld has a --verbose option that does print some search paths, but
those are not the ones used when ld is invoked (via collect2) by GCC or
Clang, so it can't be used.
To make Clang print its library search paths one can use
-print-search-dirs, which however doesn't print include search paths. So
amend the existing code in order to make a second call to clang on
non-Darwin systems. This second call is used for library path detection,
and fixes the build on non-Darwin (tested on Linux).
Change-Id: Ic858f908ee1a2e0eb307abb074daee0ded38abd5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It is considered slightly faster than the default mode[1],
but on Windows it causes trouble when aborting the build,
it leaves behind zero-sized object files which cause link
error. See discussion in the bug-make mailing list[2].
[1] https://stackoverflow.com/a/1512947/764870
[2] http://lists.gnu.org/archive/html/bug-make/2017-06/msg00066.html
Change-Id: I7aa0b328a8c743fdfe9b0aece02b329066515076
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It prints the warning even if we surround the affected code with
QT_WARNING_DISABLE_GCC("-Wstringop-overflow") (see e4eaa62943),
so we have no alternative other than to disable the warning completely.
Change-Id: Ia3e896da908f42939148fffd14c488c4006040e6
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
System headers like tchar.h need the _UNICODE define, not UNICODE.
While qplatformdefs.h already provides _UNICODE when UNICODE is
defined, users might want to include tchar.h without Qt includes.
This is consistent with Visual Studio's default defines.
Task-number: QTBUG-61411
Change-Id: I2f604368080270d840f0dbb2cf273805d2ba5239
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The strings in Windows VersionInformation resources should be
capitalized by convention, and the entries are usually not terminated
by a dot. However, "Ltd." is an abbreviation and should be
dot-terminated.
Change-Id: Ibea3443ac38846e29a3e77ab3e8d5d77b9370272
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This creates a VersionInfo resource on Windows for Qt's tool
executables similar to what Qt's DLLs contain.
Task-number: QTBUG-55755
Change-Id: I9e5d7bedaec9d14f29a9eeeb6697b07241f860d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Any version prior to 2015 is not supported anymore.
Change-Id: I9ccc87fc506521b560fda1b4c88f9c3aebd7a485
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Introduce uap3 namespace which is used for newly introduced
capabilities. In addition, the autodetection of namespaces for
capabilities within the uap namespace is disabled in Visual Studio
lately. Hence, the output needs to be more verbose including the
namespace for a capability.
Task-number: QTBUG-60899
Change-Id: Ia1ccf825d4c257d2661e34c195c45fd37e0b6413
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
uikit/sdk.prf replaces QMAKE_MAC_SDK_PATH with a make expansion of that
variable, which of course does not work when we use the contents
directly.
amends 6d5489f5d.
Task-number: QTBUG-61690
Change-Id: Id77dff8ee7d737dd35f74cc7d39faaa50b4b1ab9
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Some users don't want to download the full Xcode installation which can
weigh upwards of 5 GB download and 20 GB installed.
[ChangeLog][macOS / iOS] Qt can now be built using just the Xcode
Command Line Tools, without needing to install the full Xcode IDE.
Task-number: QTBUG-35928
Task-number: QTBUG-41908
Change-Id: I6d13c9a03ab9087b3ab56e8547f53f0cc2806c7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Since the mkspecs always set QMAKE_APPLE_TARGETED_DEVICE_FAMILY, it will
never be empty, and the warning message and automatic fallback to
QMAKE_IOS_TARGETED_DEVICE_FAMILY will never be used.
Task-number: QTBUG-60430
Change-Id: I79e36d355dae3f8a4429d73e753fed3c090a5d24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This reverts commit c0e94dd093, as it
introduced a regression for applications that sets an installation
target (on Android), which a lot of our examples do. The installation
target for Android applications/libraries needs to be within in the
application bundle's directory tree, or it won't work.
Task-number: QTBUG-61635
Change-Id: I8c919ef3888d7679b0f9659796f5e590bc1faa57
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Adds a bit of extra safeguard to ensure we don't accidentally fall into
the generic unix isEmpty(QMAKE_DEFAULT_{INC,LIB}DIRS) code-paths.
Change-Id: Id760b32cd29cb2b9db1390c174e1637e2dddaabc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
these are not meant to be deployed, so the install hack should skip
them.
Task-number: QTBUG-42830
Change-Id: I870499dca2cfea87bf0048f019d651ce9cc5d788
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while it's mildly insane that we auto-generate install targets to start
with, we can at least refrain from doing so if there is one already.
as it happens, this removes the need for excluding the qt build
explicitly.
Task-number: QTBUG-38452
Change-Id: I74d5df447fba525fa79896c9be2c71d82bc2c6ce
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was originally enabled in the mkspecs for 64-bit QNX 7.0.0
but that broke when the qtConfig change was made. It looks like
qtConfig shouldn't be used in the platform mkspecs. I suspect
the stack-protector changes were left out of the 32-bit mkspecs
so that 6.6.0 builds wouldn't be affected.
Ignore the stack-protector/stack-protector-all possibility since
it isn't possible to access it without a command line option.
Specifying both options doesn't even make sense since
stack-protector-all encompasses stack-protector.
For now, leave out command line control of this feature.
Task-number: QTBUG-59644
Change-Id: I99323216be5b592dd2c3bef6d22da195764a6e65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The -Xarch option is not supported by ccache, so unless we need to
distinguish precompiled headers for multiple architectures it's better
to not pass it.
Change-Id: Iae02d37f7a89aedebecedff7290f88d2de1ca362
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Do not pass /Za to MSVC to generate moc_predefs.h, because this option
is incompatible with compiler options like /fp:fast that may be
user-specified.
The /Za option added, because moc failed parsing header files that
contain MSVC extensions. Moc was fixed in 94a2aec0, and we can safely
remove the /Za option.
Task-number: QTBUG-58391
Change-Id: I9791224b1773d0f81d2bbb7915787a7c5e68430c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
there isn't really a point in doing strict shadow builds of them, and
it complicates stand-alone building of sub-projects (because it points
below the build root).
Task-number: QTBUG-58372
Change-Id: Ia3bde3826baac44749b27452fd4aeb9491ecb94e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... and rename those determined by toolchain.prf to QMAKE_* (this was
already the case for the newly introduced msvc and icc variables).
this restores the ability for user projects to query the toolchain qt
itself was built with, which is necessary for compatibility checks.
in fact, we may do such validation in toolchain.prf itself at a later
point.
Change-Id: I35f4c393c5e4e0fe987c0844714b7a8f8687c24e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The instruction is "RDRAND", but the feature name, according to GCC, is
RDRND, so I had to change some macros in qsimd_p.h.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5166779137e63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We need to actually run the linker, otherwise clang will just
run the preprocessing step as we asked for. We build as a shared
library to not have to provide a main() function.
Change-Id: Ied34757bb5c43a862bf2d9778340c497b93d572f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
