Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The test was re-using a main window and menu bars for all tests,
clearing and repopulating them. Rewrite the code to be able to
use menu bars and windows on the stack separately for each test.
Change-Id: I13ab31b26b70bc8537e8d8ab164051b3197cd68e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
QButtonGroup emits signals on clicked, pressed and released for
buttons in the group, but for some (insuffienct) reason it did
not emit anything for toggle (the only signal that it didn't emit
anything for).
This patch changes that, by adding handling of that signal to
QButtonGroup.
Task-number: QTBUG-14857
Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Done with Jan Arve
Task-number: QTBUG-33104
Change-Id: I8319748536d448d1c37a26527ced53156d8c2f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Try to stabilize doubleRepaint and others, try to get them away
from taskbar areas.
Change-Id: Icae8da575999afccb314edafd7deb16446e3d1c2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The new test server image will not have a SMTP service installed, and
the network self test does not check for that either.
Change-Id: I1063777832148e184de4ddf21d9154364f644e1e
Reviewed-by: Richard J. Moore <rich@kde.org>
This test works with no Qt version (4 or 5) when testing with the
Squid (HTTP proxy) version deployed on the new test server image.
Task-number: QTBUG-33180
Change-Id: If244526a4baed9f3836dade007fe0f15649a8f86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ia786d4fab64da974bb60f24c05325925d42a1e70
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The documentation says that we scroll one pixel
Quote:
"QAbstractItemView::ScrollPerPixel (value 1)"
"The view will scroll the contents one pixel at a time."
However until now Qt has tried to be smarter than the
documentation, but is actually getting in the way of the user,
where a manual set value to setSingleStep will continuingly
be overwritten (on e.g resize).
This patch ensures the behavior described in the documentation
for the vertical headers - and leaves the control to the user.
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
scrollbars will now by default only scroll 1 pixel when scrollMode
is set to scrollPerPixel. That is it will (when scrollMode is
scrollPerPixel) do what is stated in the documentation, and no
longer automatically adjust the scrollbars singleStep. The user
can now control that value.
Task-number: QTBUG-7232
Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The QCommandLineParser class provides a means for handling the command line options.
QCoreApplication provides the command-line arguments as a simple list of strings.
QCommandLineParser provides the ability to define a set of options, parse the
command-line arguments, and store which options have actually been used, as
well as option values.
Done-with: Laszlo Papp <lpapp@kde.org>
Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was inserted into the shared data (i.e all instances)
Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures correct detach when insert with an iterator is
called on a shared instance (i.e same behavior as QVector)
Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before calls to erase on a shared instance would in release mode
imply that items were removed from the shared data (i.e all instances).
In debug mode it would assert.
This patch improves the behavior to detach and erase items
specified by the iterator(s) (i.e same behavior as QVector)
Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUrl("http%3A%2F%2Fexample.com") has only a path of
"http%3A%2F%2Fexample.com". In Qt 5.0 and 5.1, the %3A would get decoded
to ':', which in turn makes the URL invalid (colon before first slash).
Found via discussion on the interest mailing list.
Change-Id: I7f4f242b330df280e635eb97cce123e742aa1b10
Reviewed-by: David Faure <david.faure@kdab.com>
Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is
really only for the native dialogs then the SnapToDefaultButton hint is
moved as it has relevance for all dialogs
Task-number: QTBUG-32631
Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Don't use the 'emit' keyword in the moc generated code for properties
with MEMBER
Task-number: QTBUG-33094
Change-Id: I5a0950e9c7a0dee347a6a6c79098e3e7d4776014
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This may happen when we have namespaces and the qualified name is used
to scope an enum.
Task-number: QTBUG-32933
Change-Id: Ic4923bbfb138387bae1e3694172661ace8342089
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moc's C++ is not 100% accurate, so better process the invalid macro with
a warning rather than an error.
Such errors occurred in the QSKIP macro with variadic arguments since
that macro is defined conditionally.
It is also causing problem in boost header (cf task QTBUG-29331)
Task-number: QTBUG-29331
Change-Id: Ice6a01b675286540d6470c8e36920b7efd39b540
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes the wrong value for path() and fileName() when a
path or file name actually contains a '%'.
userInfo() and authority() are not individual getters, they combine
two or more fields, so full decoding isn't possible (e.g. username
containing a ':').
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
defaults to decoded mode in the getters and setters for userName,
password, host, topLevelDomain, path and fileName. This means a '%'
in one of those fields is now returned (or set) as '%' rather than "%25".
In the unlikely case where the former behavior was expected, pass PrettyDecoded
to the getter and TolerantMode to the setter.
Change-Id: Iaeecbde9c269882e79f08b29ff8c661157c41743
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Forward-port of 9ce60ff509c4ff27fe861fc5b2080f50897a68c4 (Qt4Macros:
Allow specifying a TARGET in invokations of macros., 2013-02-26)
from cmake.git.
This causes the INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS to be
used from the specified target when running moc.
Change-Id: I868a35ade3c6b059e64d226291cf2046709d86d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
... supported on the new test server. Once the new server image is in
place, we can only allow for the new life time hint of 300 seconds.
Task-number: QTBUG-33040
Change-Id: Id6ad9983789cc6badf3fc2f6628bf79379988201
Reviewed-by: Richard J. Moore <rich@kde.org>
The unit tests were caching the original TZ value to restore later
after testing with different TZ values. The problem is reading TZ will
return a null value if no override TZ value is set, and if you then set
the TZ to null the system assumes UTC and not the system time zone.
Instead we need to unset TZ if it was null to start with.
Change-Id: Ib0625b1712e565f9fdfa99e2ffe1e5d74f059354
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
use the new parser flags to report all i/o errors directly.
as a notable side effect, the "WARNING" prefix is gone (even though
it is still treated like that, which is mildly insane to start with).
Change-Id: I084375d5e7a3314ae763795f7c318804a9fb84b6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows platforms to dynamically alter their keyboard
shortcuts, for example if they are user-configurable on that
platform. Current behavior remains the same.
QEvent previously used the hardcoded values in QKeySequencePrivate so
this was modified to use QKeySequence::keyBindings().
In order to keep the speed of QEvent's former binary search, we moved
this code to QPlatformTheme::keyBindings(), making it faster for all
keyBinding lookups.
As we now need to search by StandardKey instead of by shortcut the list
is reordered and a test is changed to reflect that.
Change-Id: Iefb402fbbe8768be2208ce036f3c2deed72dcc6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Currently the default for QSplitter::opaqueResize is hard coded,
which is less than ideal. Instead this should be provided as a
style hint via QStyle so as to give a more uniform look to all
applications.
Change-Id: I5711811f7b672e36aafcd292ed320308570a0390
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This tests crashes a lot lately.
Task-number: QTBUG-29684
Change-Id: I6892238dc071f050b0208dd5b4843629fa707347
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Created QTBUG-33067 for tracking the issue, after some debugging.
Change-Id: Iaf5556db2e0858e40a7cf6c9dbbe7e6fd6120bac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
Though the worst case memory usage was improved in
b800d8b94a the best case usage changed.
Since best case is the same as worst case in Qt5, we should
use as little as possible, which this patch ensures.
We reduce the memory usage from 3 to 2 ints per section - which is
half of worst case in Qt4. There seems to be no bigger cost in
performance doing that. The recalcSectionStartPos is still very fast.
This patch limits the maximum section size to (2^20) ~ 1.000.000 pixels.
This alleviates
Task-number: QTBUG-32325
Change-Id: I9b7530030a31b4e35cf1ca9e32c6b936f5ea9790
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Sections may be hidden => QStyleOptionHeader::position must reflect the
state seen on the screen. Otherwise styles will give wrong visual
results.
Task-number: QTBUG-32203
Change-Id: I7ef86496be092bf6f52ec45f757b501f38c3a431
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Invoking waitForStarted() on a QProcess before or after an unsuccessful
call to start() (e.g., with an empty command), would execute FD_SET with
an invalid file descriptor and cause the process to abort.
The bug can be reliably reproduced on OSX.
Task-number: QTBUG-32958
Change-Id: Id25b7781168489281645e21571361ca1a71d43e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In this patch we introduce tabBarClicked and tabBarDoubleClicked to get
a finer grained information on the user interaction with the tab bar.
Done-with: kevin.ottens@kdab.com
Change-Id: I7be76a556ca09186e98f2e076fe2512d6c5e6773
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Follows a similar include-pattern as the qguieventdispatcher test.
Change-Id: Ie8669a5bc155abd6687e81526f2b95d0d19b009e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
A QCoreApplication may run a different event dispatcher, such as the
QEventDispatcherBlackberry, and QGuiApplications will have the GUI
dispatcher provided by the QPA plugin, such as QCocoaEventDispatcher.
Neither support X11ExcludeTimers.
Change-Id: Id5ea1c7dd74a127e13fa4d2eaa9a1bd2715a9dbb
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is a flaky test on Windows 8 64-bit, so marking it as
XFAIL if it is expected to fail.
Task-number: QTBUG-30943
Change-Id: Idd276f80b54fcd5cf295a7e1adebcf0020eaa8ca
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
QStandardPaths::enableTestMode has a verb in the imperative ("enable")
as the core word in the name. That indicates an action. The function
should not have had a parameter.
Instead, add a Qt-style setXXXEnabled function.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths::enableTestMode is
deprecated and is replaced by QStandardPaths::setTestModeEnabled.
Change-Id: Ib26ad72d7c635890d2cb22ae9d44cbda08a6f17c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
This is a flaky test on OS X 10.8, so marking it as XFAIL if it is
expected to fail.
Task-number: QTBUG-32690
Change-Id: I0665c7474bb62c4c0a70e4b93cc977e3dbf1e150
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This fixes 4ca4fb93f6
where the fix was right, just in the wrong place.
Change-Id: I3cde24624e3789870f1c16ccb92f78f7fc567fd5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Based on addAction-API.
Change-Id: Ie6c3d2d728b23a85cdd80428c92ee8208ae0a65c
Done-with: Kevin.Ottens@kdab.com
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
It has been discovered it changes the behavior of qdbuscpp2xml
resulting in builds of some apps breaking. Even if the
behavior is more correct, such behavior change in a stable branch is
not acceptable
Change-Id: I1d79104ebf11c3f48c84f109be2926af96cddae7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mark some tests as expected failures on OS X 10.8
- tst_QSettings::ctor(native)
- tst_QSettings::ctor(ini)
- tst_QSettings::ctor(custom1)
- tst_QSettings::ctor(custom2)
- tst_QSettings::rainersSyncBugOnMac(native)
Task-number: QTBUG-32655
Change-Id: I54928d991a8ccf300b40747feaa6fda9d124781b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When falling back to the completion prefix, make sure to also pass an
invalid index to activated().
Change-Id: I6b282a01c95492466890632b77837bcc96eb038a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
During Qt Contributor Summit 2013 we agreed that we will not support
exception safety anymore.
http://comments.gmane.org/gmane.comp.lib.qt.devel/12004
Task-number: QTBUG-32642
Change-Id: If57917fe8af45e787e215431c94579bc86fc7683
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As Qt still thinks that all UNIX filesystems are case sensitive, which
is not the case for eg Mac, where they might be both, as well as for
mounts of other filesystems.
Change-Id: I07b8550685bfa17ac407c20ac991dc54df040942
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This prevents deadlocks in case the destructor re-enters.
(Example: a functor containing a QSharedPointer of a QObject)
This also fixes a leaked slot object in disconnectHelper.
Change-Id: Ia939790e3b54e64067b99540974306b4808a77f2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: Icd6a09402c3cf14286f4ba1f8f4c99ac483ec1a3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Functions normally found from <sys/socket.h> are available on VxWorks
from <sockLib.h> header.
Change-Id: I2263ec40ba9f37bc95755b633fb43d66ceb2777c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This test has recently timed out a few times on OS X test runs, with
no relevant changes to account for the timeout.
Task-number: QTBUG-27890
Change-Id: Ia24f7812ed2a0b3eac51847a7dacbc9f225b48b8
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Add QLineEdit::addAction() overloads,
allowing for a variable number of icons or user-defined
widgets.
Change-Id: Id298f18c2f47cc998170357e65cc6098df851aab
Done-with: Kevin.Ottens@kdab.com
Reviewed-by: Thomas Zander <zander@kde.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Previously, the topmost untransformable's scene transform, which
includes the item's position and local transformation, was used to
determine the item's anchoring position. This position was then
passed on to be multiplied by the item's transform again. This
works fine for toplevel untransformable items that don't have any
transform set at all, but those who do would have their transforms
applied twice - one to determine the anchoring position, and again
to transform the item itself. Since only translation transformations
can affect the first operation (the anchoring pos), this bug only
applies to items that set ItemIgnoresTransformations and use a
local transform that includes translation.
Task-number: QTBUG-21618
Change-Id: I772d52d59dfd9f242d0140632a87e9c68dfe0ea1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Added the compiler options, we need the info of sdk.
Task-number: QTBUG-32715
Change-Id: I70612f36a16e0ab5025194a10ce399822e159c7c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By not assuming that the file system is case insensitive. OSX supports
both.
Change-Id: I11a4ac4cdff97b97b183dd319757a42ae14bb52d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
By not assuming that we have the '/Developer' directory at the root
of the file system. 'Users' is less likely to be removed/deprecated.
Change-Id: I659bdb67cfb1ed2f73bc643ba4afe1f1f89d5bc5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
If the files directory is not world-readable as well as
writable, the "rm *" command will fail because it cannot list
the files to delete.
Task-number: QTBUG-32079
Change-Id: Idb32a2be3184b9ffc43d011136fcc6f2a2a01756
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
To make it easier to debug failures, adds the "testcase"
commandline option, which takes the name of the test to
run and then just runs this single test.
Change-Id: Ib202bb2a5dac889b6691f9c4d0620b3e0941cf3d
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Make qabstractproxymodel and qidentityproxymodel build and run
even if -no-widgets is used since they don't depend on Qt Widgets.
Change-Id: I48bc2f6a78812b1bf0083f76c6a4e106f4e38650
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For some time, we've assumed that the URL specification had a mistake in
that it didn't allow the "#" character to appear decoded in the
fragment. We've gotten away with it so far.
However, turns out that the CoreFoundation NSURL class doesn't like it.
So we have to be stricter.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %23 found in the fragment to "#" in the output of
toString(QUrl::FullyEncoded) or toEncoded()
Task-number: QTBUG-31945
Change-Id: If5e0fb37bae84710986c9ca89bd69ec98437cd63
Reviewed-by: David Faure (KDE) <faure@kde.org>
It's a good practice to always replace bad UTF-8 sequences with the
replacement character. It could be considered a security issue too.
Change-Id: I9e7d72e4c4102cdb8334449b5e7f882228a9048f
Reviewed-by: David Faure (KDE) <faure@kde.org>
Those sections contain more than one components of a URL, separated by
delimiters. For that reason, QUrl::FullyDecoded and QUrl::DecodedMode do
not make sense, since they would cause the returned value to be
ambiguous and/or fail to parse again.
In fact, there was a comment in the test saying "look how it becomes
ambiguous".
Those modes are already forbidden in the setters and getters of the full
URL (setUrl(), url(), toString() and toEncoded()).
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer supports QUrl::FullyDecoded mode in authority() and userInfo(),
nor QUrl::DecodedMode in setAuthority() and setUserInfo().
Change-Id: I538f7981a9f5a09f07d3879d31ccf6f0c8bfd940
Reviewed-by: David Faure (KDE) <faure@kde.org>
The longer explanation can be found in the comment in qurl.cpp. The
short version is as follows:
Up to now, we considered that every character could be replaced with
its percent-encoding equivalent and vice-versa, so long as the parsing
of the URL did not change. For example, x:/path+path and
x:/path%2Bpath were the same. However, to do this and yet be compliant
with most URL uses in the real world, we had to add exceptions:
- "/" and "%2F" were not the same in the path, despite the delimiter
being behind (rationale was the complex definition of path)
- "+" and "%2B" were not the same in the query, so we ended up not
transforming any sub-delim in the query at all
Now, we change our understanding based on the following line from
RFC 3986 section 2.2:
URIs that differ in the replacement of a reserved character with
its corresponding percent-encoded octet are not equivalent.
From now on, QUrl will not replace any sub-delim or gen-delim
("reserved character"), except where such a character could not exist
in the first place. This simplifies the code and removes all
exceptions.
As a side-effect, this has also changed the behaviour of the "{" and
"}" characters, which we previously allowed to remain decoded.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer considers all delimiter characters equivalent to their
percent-encoded forms. Now, both classes always keep all delimiters
exactly as they were in the original URL text.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %7B and %7D to "{" and "}" in the output of toString()
Task-number: QTBUG-31660
Change-Id: Iba0b5b31b269635ac2d0adb2bb0dfb74c139e08c
Reviewed-by: David Faure (KDE) <faure@kde.org>
7721c3d27c fixed the case where two similar definitions are in the same
directory. This commit fixes the case where two similar definitions are
in different directories, both in the search path (GenericDataLocation).
If the file extension gives us the same mimetype twice, there's no conflict,
i.e. no reason to fallback to determination from contents.
Change-Id: I72c56004b6d5e88964159e53ec160ce8b06c2264
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the version number to 1.0, and use the public doctype.
Change-Id: I9b071c80c410c31c38813c4447edd7b186226fab
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This patch fixes two issues that prevented the application font related tests
of tst_QFontDatabase from passing:
* The code for creating the font descriptor after the registration of an app font
with file name using CTFontDescriptorCreateWithAttributes must create a dictionary
with kCTFontURLAttribute as key and the CFURLRef pointing to the on-disk file as
value. Unfortunately the code mixed up keys and values in the dictionary.
* Registration of app fonts within QFontDatabase itself on Windows and Fontconfig
platforms works by QFontDatabase calling addApplicationFont on the platform db
after calling populateFontDatabase(). It assumes that addApplicationFont on the
platform db is capable of registering the font right away. This part was also
missing from the Mac implementation and this patch implements it by moving the
common registration code from a CTFontDescriptorRef out into a separate method,
called from populateFontDatabase() as well as addApplicationFont().
Task-number: QTBUG-23062
Change-Id: Ide5e6bf277d99f3cab50ee0d4631cc3fba6d0d45
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Without it the invocations were working but were not listed on introspection
Change-Id: Ie62f7dc3577f52b6888ddebf0392fdf51f2845d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QWindow::resizeEvent documentation states that resizeEvent
is invoked after the windowing system has acknowledged a
setGeometry() or resize() request.
The Cocoa plugin however did set the platform window geometry
immediately so that the qnsview's updateGeometry returned too
early.
Task-number: QTBUG-32706
Change-Id: I1f359ab368833d174ab6740f4467b0848c290f13
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
On some platforms (like BlackBerry) qDebug doesn't write to stderr,
so we directly write to stderr with fprintf.
Change-Id: Ib86211c98cf4da1fa2dbea4600a78e2013dc1a5a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Halley's method to get a better approximation is omitted, if it
would include a devision by zero (INFINITY/NaN is worse).
Change-Id: Ida09326e2b5892d7cb21bcb956631c289e5b56ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When readData() is called repeatedly, we need to keep track which
part of the multipart message we are currently reading from.
Hereby we also need to take the boundary size into account, and not
only the size of the multipart; otherwise we would skip a not
completely read part. This would then later lead to advancing the
read pointer by negative indexes and data loss.
Task-number: QTBUG-32534
Change-Id: Ibb6dff16adaf4ea67181d23d1d0c8459e33a0ed0
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The fill color was not correctly converted before being filled into
RGBA8888 images. This patch adds a function with convertion and
adds tests for it to tst_qpainter.
Change-Id: If8b0e6db38b2794a60301842e25f377eb7216796
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
We're rolling back exception safety support
Task-number: QTBUG-32642
Change-Id: I25f20b554a93f25d00cca19b3e308d6cc8fe85e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It makes sense for a QScopedPointer to be movable, for instance
for allowing instances to be returned from a function.
Ownwership of the managed pointer is still tied to one (and one only)
QScopedPointer instance.
Moreover, a move assignment operator makes sense as well, as it
implementing the equivalent of
this->reset(other.take());
only when other is a rvalue and not a lvalue (so either it's a temporary
or it's getting explicitly moved in with std::move).
This makes QScopedPointer API's a bit closer to std::unique_ptr's one.
Task-number: QTBUG-29754
Change-Id: If1ac0c688327a67af4ad5b7ad45b439b022ed1c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tests are passing nowaways on OS X.
Task-number: QTBUG-27890
Change-Id: I6a0a881ece844ef931cb8af51b58d33c40be4d2c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Added full path to src dir for testdata.
Task-number: QTBUG-32535
Change-Id: I38e96216e9a016869151adf0ae995e068b8b5354
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Added full path to src dir for testdata.
Task-number: QTBUG-32536
Change-Id: I5ef215d451a6407c277d2c98f21ffc35a8657e28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QDateTime can now be converted to strings compliant to RFC 2822.
Additionally, it supports RFC 850 and RFC 1036 during parsing.
By having them all together, all type of dates found in exchanged
messages on the internet (including USENET) get supported.
Change-Id: I771066c23f409d20b31b7d802f37852ea68ca2a0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Support the byte-ordered RGBA format which is used by OpenGL, and many
endian neutral byte formats.
Task-number: QTBUG-32201
Change-Id: I77cffb4c30c69545fa96ded2f537b2ebd9351acb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Some packagers don't want to install the private headers.
Check the existence of private headers only if the 'Private' component
is specified when finding the package.
Task-number: QTBUG-32466
Change-Id: I1fdbfb25e8ce485cd051564b937f766b2733741a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
edited() signal should not be emitted when QValidator fixups
text in a lineedit.
Change-Id: Iccef45c4b858a65fd5097dc9e5033cefb09ad889
Reviewed-by: David Faure <david.faure@kdab.com>
Codecs registered by creating new QTextCodec instances should be listed
there.
Task-number: QTBUG-32500
Change-Id: I56c00e0d6bbfef55a6cbd571bcf9aa2cf333ef3a
Reviewed-by: David Faure <david.faure@kdab.com>
Before:
FAIL! tst_testcase::testcase: Compared values are not the same
Actual (actual): F0O
Expected (expected): FOO
Now:
FAIL! tst_testcase::testcase: Compared values are not the same
Actual (actual) : F0O
Expected (expected): FOO
Change-Id: I6f0768e4ef53e065b85a56879cecbad06fa34aef
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Currently tst_QEasingCurve::setCustomType() is always failing on CI
when ran on 32 bit 11.10 Ubuntu.
Task-number: QTBUG-32432
Change-Id: Iaf346c14985f14716692fe996714b7040fb70930
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
We don't know what it might be used for. The RFC for URI says it's an
HEXDIG, and since we uppercase all other HEXDIGs already (in
percent-encodings...).
Change-Id: I56d0a81315576dd98eaa2657c0307d79332543a5
Reviewed-by: David Faure (KDE) <faure@kde.org>
So far, this function hasn't been used for input coming in from the
user, so it wasn't necessary. But we may want to do it, or we may
already be doing it accidentally somewhere that isn't triggering the
failed assertions during unit testing.
So let's be on the safe side and allow it. And test it too.
Change-Id: Ib63addd8da468ad6908278d07a4829f1bdc26a07
Reviewed-by: David Faure (KDE) <faure@kde.org>
We have no idea what it might contain, but test it anyway to make sure
it works. Turns out there were a few bugs the unit tests have now
caught.
Change-Id: I0a6c868365feec31c2360b3c341c8ca6944f4352
Reviewed-by: David Faure (KDE) <faure@kde.org>
Registered names and IP addresses can only contain unreserved
characters (letters, digits, dots, hyphens, underscores) and the
colon, which is a gen-delim. For registered names and IPv4 addresses,
we can simply use the default config -- if anything that remains
percent-encoded, it means it's not a valid hostname anyway.
For IPv6, we just need to decode the colon.
Change-Id: If8083d47f6e5375f760e7a6c59631c89e4da8378
Reviewed-by: David Faure (KDE) <faure@kde.org>
It's not necessary to check at every point if we know the minimum file
size: it must contain at least the header, one segment (__TEXT) and one
section (qtmetadata). Most files have more than one segment and more
than one loader command, so this check does not mean we can eliminate
the checks further down.
Also be more resilient against corruptions in the header data: check not
only the additions, but the values themselves. For example, an offset +
size addition could be smaller than the file size when the addition
overflows in 32-bit. Another thing is that the cmdsize fields could be
corrupt too.
Change-Id: I7968a769c1cbe9150270c91823cafc4f8f833876
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We already had an ELF decoder, which helped us greatly to find the
metadata and that catches most Unix systems (Solaris, QNX, HP-UXi, and
all of the free Unixes). On other Unix systems, aside from Mac OS X,
we simply scanned the entire file for the signature. On Windows, even
without a COFF-PE decoder, we use a LoadLibrary trick to load the
plugin without loading the dependent libraries. In most cases, that
works.
Unfortunately, on Mac OS X we didn't have a decoder and nor could we
do the file scan: because Mac OS X binaries could be fat binaries, we
wouldn't know which architecture's signature we had found.
No more. This adds a full Mach-O decoder to QtCore. It is also capable
of finding the boundaries of the architecture's binary, but that
functionality is disabled since all Qt 5 plugins have plugin metadata
sections.
Change-Id: I2d5c04c5ecf024864b8a43f31ab6b7e6c5eae9ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The one in tst_QLocalSocket::writeToClientAndDisconnect just needed
proper ordering: that's what waitForDisconnect is for. At the same time,
we need to make sure we get the same message from all three
implementations of QLocalSocket::waitForDisconnect (and without the
useless space at the end).
Change-Id: I21364263cf908df022df814a6a39fcb5783e84e6
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The rule for a new override is that it must still work if the old
implementation is called. The catch is that any class that derives from
QProcess and isn't recompiled will still have QIODevice::open in its
virtual table. That is equivalent to overriding open() and calling
QIODevice::open() (like the tests).
In Qt 5.0, QProcess::start() called QIODevice::open directly, not the
virtual open(), so there's no expectation that a user-overridden open()
be called. With that in mind, simply fix QProcess::start to not call the
virtual open at all.
Similarly with QLocalSocket, the calls to open were always non-virtual.
Task-number: QTBUG-32284
Change-Id: I88925f0ba08bc23c849658b54582744997e69a4c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This should have been done in the commit that introduced open
(953255abab), but was missing.
Change-Id: I1c2de4ad5fa42aa5b90646e7d4d7d1b1570a0f87
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Currently, calling
QGraphicsScene::items(QPointF(0, 0), Qt::IntersectsItemBoundingRect) or
QGraphicsScene::items(QPointF(0, 0), Qt::ContainsItemBoundingRect)
will exclude items whose shape does not contain QPointF(0, 0). This is
because QGraphicsSceneIndexPointIntersector::intersect() also checks if
the point is contained within the shape, instead of just checking
if it is contained within the bounding rect.
Task-number: QTBUG-19036
Change-Id: Ie701af2a5694d40cf9b3c9c19adbb09a53a4e398
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Do not attempt to lookup the service owner on peer connections (it will
fail).
Make QDBusAbstractInterface::isValid() return a sensible result on peer
connections, instead of always returning false.
Task-number: QTBUG-32374
Change-Id: I1b02feaffb3b255188f8d63306f89f5034a32f22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unexport free function qt_registerAliasToFontFamily() and
Make it a static member of QPlatformFontDatabase instead.
Change-Id: I1df49a8e37a24b3961f92288d67b6f1108a7d520
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Copy some needed files into a local folder when QtWidgets is not
available.
Task-number: QTBUG-31993
Change-Id: I93b65bda198c22a60e979c119de8de683a78bb53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
- Don't run this test in parallel
- Remove redundant QT=-gui
- Place the insignificant_test marks together
Change-Id: I078fa29a4dccef9af8798792d06d51835b4b8934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This is a bit like QDir::cleanPath(), but for URL paths.
The code is shared with QDir::cleanPath(), by extracting the common parts
it into a helper, qt_normalizePathSegments().
Change-Id: I7133c5e4aa2bf17fba98af13eb5371afba64197a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce QScopedPointer for windows or instantiate them on the
stack to prevent leaks. Tile all windows within virtual
screen to ensure they don't influence each other and are not
in the taskbar area.
Move cursor away from windows in modalWindow-test.
Change-Id: I40343e9f72263e22bdf2560448d7efcc915d17cb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
It was doing tricks with URLs that it shouldn't be doing... including
running QDir::toNativeSeparators on a URL.
Task-number: QTBUG-32311
Change-Id: I5b6f640919956998c00dcf507f931045f21a9e53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It seems like the left-side menu bar on Ubuntu 12.04 causes some
problems when it is not automatically hidden, which is the case
in the CI machines.
Task-number: QTBUG-31995
Change-Id: I01ff3fe4c09d720b2dd53037c42e59679d8570dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The deadlock is caused because the QEvent is destroyed while holding the
event list mutex. And the QEvent may have a custom destructor that will
re-enter the event handlng code.
The QScopedPointer that should destroy the event must be created after
the MutexUnlocker.
Regression introduced by commit f9035587b9
Task-number: QTBUG-31606
Change-Id: I6b2cbc2656eacdec61b641886953f00bf5b3ff36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is better to mark a test as XFAIL so we get an error whenever
it gets fixed.
Task-number: QTBUG-23059
Change-Id: I0f2f491645c261bf0e735dde6a16d8e90e0b17a0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Sometimes it is nice that hiding a widget does not affect the
layout. This patch makes that possible by allowing hidden
widgets to take up space.
Change-Id: Ifbc1cdee0e112950acc025919b98199ea9558db7
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Makes for more informative debug output when the tests fail.
Change-Id: Ib07dd79452a56413c711394dd72aa37dbb4a70d7
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows to find the parent directory url using
url.adjusted(QUrl::RemoveFilename).
Change-Id: I1ca433ac67e4f93080de54a9b7ab2e538509ed04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise the output is too intertwined.
Change-Id: I6729727b3afcdcbec58e3fa560587dd1fa08f38e
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qt_ACE_do(".co.uk") was returning an empty string because of the
leading dot. Allow leading dots from topLevelDomain, but not from
other calls.
Change-Id: I757d9960708e205d30554cd2bbcf618c8624792b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling waitForNotified on an uninitialized notifier will print a
warning and return false. The autotest has been adjusted.
Change-Id: I85e18d6d0a8a5462e1a5d451613add941d89b5fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instantiate widgets on the stack to ensure they are destroyed
when the QApplication instance goes out of scope.
Introduce waitForWindowExposed() to make sure events are in sync.
Task-number: QTBUG-32125
Change-Id: Ia54e2fa9a7c2e279353c4514a6735e326edf35ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Need to store 17 decimal digits for binary64, IEEE 754 double formats.
Autotest is included. Test cases from TC39 test suite for ECMAScript.
Task-number: QTBUG-31926
Change-Id: I546398f21ea7ff5e40e89fc9de8703f628f55df9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Do not lower case file names to generate hash keys since
QString::toLower() converts some characters with context
which the Windows file system will not.
Task-number: QTBUG-31341
Change-Id: I285bfedef3c1ca9d59083229e61974dd378c72ae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Since configure no longer puts this in $QTDIR/lib, we need to
copy it from the NDK and into the device ourselves.
Task-number: QTBUG-32079
Change-Id: I75ee5f8a00de9a1ba536bcfd857e6b2e7a0e1f6e
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
If we don't call finish() before crashing the activity, then
the Activity Manager will just restart it.
Task-number: QTBUG-32079
Change-Id: I09623afe545c3f4e8b9be801ccfbe244059b270e
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We need to also load the binary for the application itself.
Task-number: QTBUG-32079
Change-Id: Ic26d5e6d950d6d18aaa54392c3c84b6deaa56c75
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We just pass 1.0 as the scaled density for now, since it shouldn't
make much different to the code being tested.
Task-number: QTBUG-32079
Change-Id: I888c4640e4627f47a2c128d2ce2a41adf4ca3132
Reviewed-by: BogDan Vatra <bogdan@kde.org>
contrary to what one may expect, it's actually *not* supposed to remove
the meta-characters it interprets.
luckily, this function is not used much any more ...
Task-number: QTBUG-31877
Change-Id: I2b60f9b173140da78db2b07b596cc2e5f6e6d555
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Qt CI system runs the unit tests after installation, but
with the qmake in the build directory. This means that the
installed content is not unit tested. Add an additional cmake
unit test to test the files in the install location.
The new test is marked insignificant for now until the true
effect on the CI system is known.
Task-number: QTBUG-27315
Change-Id: If9f12e88cfc741946cfabc25dbf789a11a2af4b8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of calling different wait functions on different platforms,
we use QTRY_COMPARE to check the process state.
Change-Id: I6489cabce9e63f9c8b1036f3cccbf35b52df72e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
This reverts commit e3fa266623b08e837cb4ccc7fe59da243d03dd27
That commit applied a change at the wrong place in the code.
Change-Id: I21e3045a3af14ad2f90c5fe338815c35a2d27ae6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Leading and double dots are bad, but trailing dots are fine. The ASCII
part of a hostname is supposed to be LDH (letters, digits, hyphen) only,
but we accept '_' (underscore) as an exception too.
Change-Id: I79957ddec4da78a0e2357fe50c8687db03e1c99e
Reviewed-by: David Faure (KDE) <faure@kde.org>
qt_ACE_do(".co.uk") was returning an empty string because of the
leading dot. This has always caused issues in KDE code too, where ACE
normalization needs the dot removed, and re-added afterwards.
Change-Id: Id9fcea0333cf55c14d755a86d4bf33a50f194429
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Unactivating a window is not really supported, nor has it ever really
been, so activate another window instead. This incidentally
also makes the test work cross platform.
Change-Id: I6e593e9b7972dd5c5038c8d18a42be90bf19248c
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
The test currently leaks 2 directories QFileDialogTestDir,
QFileDialogTestDir4SelectFiles in /tmp.
Change-Id: I396f0b069572a680d81206dd0f1ddf606cbbe9e4
Reviewed-by: David Faure (KDE) <faure@kde.org>
Number literals are always interpreted as double. This lead to errors
on platforms that define qreal as float.
Change-Id: I838f690c33bb97e39a2cca2cfd3bdfb9482bc2b2
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Removed the QCursor entry from the list of types
if QT_NO_CURSOR is set.
Change-Id: I6b8e925acedec75ed6e46b2e3fe34d0011667c91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Flip !Q_OS_IOS conditions to Q_OS_MACX where it seems appropriate,
remove a redundant condition in qtextcodec_p.h.
Change-Id: I21c8c0c490f1eb4a9337a7f2f3e907c125489438
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Only run this test case when the widgets module is present, skip it
otherwise.
Change-Id: I84f48b670b967af3bf0701ceba5a192f33989034
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Setting the buttons in the constructor is a use-case that happens
more often than setting the orientation. Yet, there was a
(Qt::Orientation,QWidget*) constructor, but no
(StandardButtons,QWidget*) one.
This patch adds it.
Change-Id: If6a5c9f7450a388cd77bd93c8dd144b2fdc11847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Unit test by Friedemann Kleint <Friedemann.Kleint@digia.com>
Task-number: QTBUG-31569
Change-Id: I526d33d4f88a41f6ac349098476bc45af6c841b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The issue is already fixed in 5.0 but let's be nice and ensure the issue
won't be reintroduced later.
Task-number: QTBUG-30931
Change-Id: Ia6944acaf6e7217f8d0f1fa75d0e9977db11d892
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Because fonts are bigger on BlackBerry than those assumed when the test was
written, explicitly adjust the font size on this platform.
Change-Id: I6a23c28c2d32edf744dd5de09ea0a97fd5f9b6d6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Some test cases rely on the fact that show() is not fullscreen, which may not
be true for some platforms. Explicitly make use of showNormal() to avoid
full-screen show on these platforms.
Change-Id: Ie62fe21bf0f466c561a27cffda99d0201b4a45af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Some tests assume that QWindow::show() behaves like
QWindow::showNormal(), which is not true for platforms in which the show is
fullscreen, forcing QWindow::showNormal() to be explicitly called.
Change-Id: Ib5f23a4d01bc6a3a2973f57488996c8c198c45f3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QDateTime.toString() is writing out milliseconds since change
15da0a5af2. Unfortunately this breaks
QDateTime::fromString() with Qt::TextDate which can't handle the new
format.
Fix by making QDateTime::fromString split up seconds and milliseconds
on a period, if any. Now
QDateTime dt = ...;
assert(QDateTime::fromString(dt.toString(), Qt::TextDate) == dt)
works again.
Change-Id: Ibfe9032e357ceaf894e33f3e33affe94f56dbf5c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
During a call to QDir::mkpath(), the same path could be created
by another process, in which case the OS mkdir will fail with EEXIST.
But the docs for mkpath() state that it's not an error if it
already exists, whereas for mkdir() it is an error. So
QFileSystemEngine::createDirectory should accept the EEXIST error
silently if it occurs while creating the sequence of parent directories
and the final leaf directory, but should fail if EEXIST happens when
it was called from QDir::mkdir(), which is when the createParents
parameter is false. We assume the operating system mkdir() and
CreateDirectory() are atomic, so there should be no race condition
in QDir::mkdir(). It's not necessary for mkpath() to call stat()
at each level, only to check whether an existing entry is a directory
or a file. Also added to the autotest to verify that if the
path is an existing file, creating a dir with the same name will
fail in either mkdir or mkpath.
Task-number: QTBUG-30046
Change-Id: I926352f10654fdf3b322c8685bb85ad8b8844874
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is a mismatch how QML and C++ converts QJsonValue. This patch
unifies conversions by adding QJsonValue support in QVariant::convert().
Change-Id: I8a1db3d77c517945ef48064b4b66ba03aa4f2fd0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Initialize undockedGeometry to roughly the current position.
Task-number: QTBUG-31044
Change-Id: I03cbe280d1215bb58ab721b60e29b45359cde76d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
this works with -no-gui, and doesn't interfere with our upcoming ANGLE
hackery.
Change-Id: I2985cc0acd1fbf185b8967ffe58606b1b7dd9d1e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
BlackBerry OS does not allow for explicitly controlling the locale through the
"LANG" environment variable. Locale is controlled by the underlying PPS
Service instead.
Change-Id: I22154e39f81a9467ad7fdb90a042396390398b1b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
In Qt 5, we declared that throwing from event handlers is undefined
behavior. So stop testing this.
We will try our best to capture and pass along std::bad_alloc, but even
that might not work, depending on compiler settings. In particular,
after the upgrade to MinGW/GCC 4.8 with DW2, this test stopped working.
Task-number: QTBUG-31615
Change-Id: Ibf5fb2ce0c48b983549096bf7aac434b6ed3ac2e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
qt_nameprep is tested by tst_qurlinternal. We just need to be sure that
QUrl handles them correctly.
Change-Id: Ic563004870d2cf2fa7a31ce49fff7280d5ffb5f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
warning C4804: '<=' : unsafe use of type 'bool' in operation
Remove outer loop and replace ugly ROW_NAME macro by
inline function.
Change-Id: Id7e4ef047adaf8017b8c21621d19c151993cc6dd
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Edge case: a > that should have been >=. Without it, we never ran the
rest of the IDN nameprepping.
Change-Id: I2276d660de3a70d0c561bb18816820d9a0f47e77
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
RFC 3454 says about prohibited characters (section 2, "Preparation
Overview"):
3) Prohibit -- Check for any characters that are not allowed in the
output. If any are found, return an error. This is described in
section 5.
In other words, we mustn't simply strip the output of prohibited
characters. We must generate an error if they are present. We do that by
clearing the data.
We already had tests for prohibited output, but they were
indistinguishable from being stripped. So instead add some extra
characters so that we can tell whether the label was cleared.
Change-Id: I2d95217c27be5e2d54deed0036cb009e3b7f4886
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Because tests are usually run as root on some setups, it does not
make sense to test for the right permissions of a readonly file.
Change-Id: I484f88722d3a9ce7123edc0fb57acae528fa194e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update the test code to match the current Qt idiom for finding test data (and
fix it on QNX).
Change-Id: I63e7c97b717722e4e6859a12f329d56b26584ce6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This only marks tst_qopengl as insignificant on Windows 7 32bit
with the Angle configuration.
Task-number: QTBUG-31611
Change-Id: I1876b6fdc32fef93edf34c2bd61d03cc9ba11135
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
In QML it is common to connect signals to slots that are implemented as
JavaScript functions. QML used to maintain separate data structures that
mirrored the QObject connection list and kept references to the JavaScript
objects necessary to perform the call on signal activation.
The recent addition of functor based QObject::connect makes it possible
to store this information in QSlotObjectBase sub-class instead, which
eliminates any extra bookkeeping.
This patch adds internal connect and disconnect overloads to QObjectPrivate
that allow for connecting QObject *sender, int signalIndex to a given
QSlotObjectBase and similar for disconnect.
Change-Id: I90f43d13eb95bd884d752484cf4faacc446f4d6a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On Mac it's expected that some elements are
filtered out of the a11y hierarchy.
We do this with the shouldBeIgnored function.
The problem is that we would ignore some objects
and then return them in the child attribute function.
This is inconsistent and leads to voice over not working.
For example having a plain QWidget with other widgets as
children would cut off all of these widgets, since the
plain QWidget would be ignored.
Change-Id: I5f6c26b272e5ca57d59c1ed1ef47e9a2b1181295
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Add font combo to top level via layout and position top level
instead of the (child) font combo.
Change-Id: I0f754c37c009d1ed83615b800d6f2467e858c047
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The TXT record is particular because each RR can contain multiple text
strings. So we need to join each RR's texts too.
To make it easy, I've made everything be QStrings.
Change-Id: Ia0506544b913585e7be860c81077cff8e0dab547
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The DNS protocol changes the order of the RRs in each reply it sends,
in an effort to balance the load in servers. For most tests, to ensure
that we get always the same result, we simply sort it back.
For MX and SRV, we can't sort because we also need to test that
QDnsLookup sorted correctly according to priority. So instead allow
that test to have multiple alternatives.
Change-Id: I5c119f907b31789de5c9cf2471cc82ecd140d06f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Section 4.2.2.4 of ISO 8601 allows for decimal fraction representations
of dates and times. Currently, when calling
QDateTime::toString(Qt::TextDate) or QDateTime::toString(Qt::ISODate),
the milliseconds will be omitted. However,
QDateTime::fromString(str, Qt::TextDate) and
QDateTime::fromString(str, Qt::ISODate) already support decimal
fraction representations, so this patch just adds this support to
QTime::toString, and hence QDateTime::toString().
Task-number: QTBUG-30250
Change-Id: If58e4b3d3105322c51d11a76b832e5e634d8991f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds a way to enable operator<, operator== and operator<<
into QDebug for QVariants with custom types.
Change-Id: I3d12d891bd7252ad2b8f1de69bced354800a1f29
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The test now passes on Ubuntu, Lucid, too.
Task-number: QTBUG-20778
Change-Id: Id7ddc4b34d03f8fb9af977c0f40615d544934f13
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Convenience function that returns user data for the current item,
analogous to currentText().
This avoids to having to write the cumbersome
QVariant variant = comboBox->itemData(comboBox->currentIndex());
(It's quite common to put strings as text and the corresponding
enum values as user data.)
Change-Id: I8c7632c647c5583d18e4e22703aeb4447d73162d
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If no stretch factors were specified, we used the preferred size as a
stretch factor. Obviously, that didn't work if the preferred size was
actually 0.
This patch works around this by actually setting the stretch factor to
1.0 if this is the case.
This should work fine in most cases, except for the case where there
are also other items with a preferred size close to 0.
In this case, the item with preferred size 0 will just grow
faster than an item with e.g. preferred size 0.1.
Task-number: QTBUG-31217
Change-Id: I966455da0bdd00308591c7f7cfbc4e134d423e57
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The winapi call used to load the icon does not
support the arguments on windows ce
Change-Id: Ia600eb9b05d5eb40778d8c281e6ce8278bfd7177
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
"QTest" is the C++ namespace; "QtTest" is the library name
- Edited the logger output in qplaintestlogger.cpp
- Updated documentation
- Updated expected outputs for self-tests
Change-Id: I43c525c43221a8d4e843a00d6d55b0f06ef55fd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Latin1 strings are usually stored as 8 bit data in the json binary
format. But that data structure has a size limitation of 16bit, so
we need to fall back to storing the string as 16 bit data if it is
too long.
Task-number: QTBUG-30946
Change-Id: I0069b1367030b0b2f819fd1f04e34c9e2534a2a3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Return the codec if one was found by QTextCodec::codecForUtfText,
instead of returning the default (UTF-8).
Task-number: QTBUG-31293
Change-Id: I95e3260376c00537006b7fbfdc3df5850e1ba657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Required to prevent qmlscene flicker on startup.
Also brings back that qWait() in tst_QGL::graphicsViewClipping()
that seems necessary after all.
Amended-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Change-Id: I14ba6e18ac98e5df1ce8ecbc263b30176b67d111
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
