Avoid using perl in CMake scripts. Remove the syncqt.pl specific
code.
Task-number: QTBUG-87480
Change-Id: I7fcd5cc83d173ec463c275b5b50b84f25044a118
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Previously if qtbase was built with feature A set to ON, then building
qtsvg, then rebuilding qtbase with feature A set to OFF, trying to
build qtsvg would fail with an error message at configure time saying
that the feature value has changed.
This check was added quite early in the Qt CMake port, presumably to
catch accidental reconfigures that might cause long rebuilds.
This has dubious benefit though. We constantly had people telling us
they get the error without knowing what to do. The usual advice was to
remove CMakeCache.txt and reconfigure.
Instead of forcing people to suffer this dance, relax the constraint
by issuing a warning instead of an error, and make it more clear why
a rebuild might happen (a changed feature value might change
the generated module C++ header file which in turn might be included
by various project sources).
Amends 20633d97ab
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-95834
Change-Id: I992bd61024958869f3b995471b4c7ff75e3a33a0
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We have VAES code in qhash.cpp that isn't getting compiled right now.
Change-Id: Ibf4acec0f166495998f7fffd16d6961261dec361
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
On the Hurd there is the standard GCC toolchain, so it is possible to
query GCC for -dumpmachine.
Change-Id: Idc8e80c0937147a8ea656bc0320a83d647278455
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The mold linker is a new linker for Linux that provides faster link
times compared to BFD ld, ld.gold and lld.
It can be found at https://github.com/rui314/mold
To build Qt with mold, ensure that the binary in your PATH and then
configure Qt with with either
cmake /path/to/qtbase -DINPUT_linker=mold
or
/path/to/qtbase/configure --linker mold
The change was tested with gcc 9, clang 10, clang 12, mold
1.0.0. Only qtbase and qtdeclarative (and dependencies) were tested.
Pick-to: 6.2 6.3
Task-number: QTBUG-99270
Change-Id: I2e64a1f4257c37ff5b64a9326e548b9b46e07c80
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Previously we passed flags like -ld-fuse=lld only to compile
calls, but not to the link call of a compile test project.
Make sure to pass it to the link call instead by using
check_cxx_source_compiles + CMAKE_REQUIRED_LINK_OPTIONS
instead of
check_cxx_compiler_flag.
Note the flag that is passed is still via passed via the
compiler launcher and not directly to the linker.
Remove duplicate flag handling code.
Pick-to: 6.2 6.3
Change-Id: I1bf90573904a9df83240b6debfee3cc9e425c6bb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This amends commit 165e01d5d5.
Above commit broke the code that adds "${PROJECT_SOURCE_DIR}/cmake" to
CMAKE_MODULE_PATH. The semicolon that separates entries of
CMAKE_MODULE_PATH must be escaped. Otherwise, the semicolon separates
elements of the flags list.
Additionally, fix the QT_AVOID_CUSTOM_PLATFORM_MODULES code path which
lacked the addition of "${PROJECT_SOURCE_DIR}/cmake".
Pick-to: 6.2
Change-Id: I72f78cf066cabe6b0002dce1aa0294aa0dc9cbf0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since commit f3c7d22dd0 we do not use
libraries from /usr/local and other non-system locations on macOS. But
our configure tests still did. This led to discrepancies between
find_package calls in configure tests and the Qt project itself.
Mentioned commit removed /usr/local and friends from
CMAKE_SYSTEM_PREFIX_PATH. But we can't pass this variable to the
configure tests, because CMake sets it up and overwrites our value.
Pass CMAKE_SYSTEM_PREFIX_PATH and CMAKE_SYSTEM_FRAMEWORK_PATH as
QT_CONFIGURE_TEST_CMAKE_SYSTEM_{PREFIX|FRAMEWORK}_PATH variables to
tests.
Tests with separate project files that call find_package() must add code
like this after the project() command:
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH)
set(CMAKE_SYSTEM_PREFIX_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_PREFIX_PATH}")
endif()
if(DEFINED QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH)
set(CMAKE_SYSTEM_FRAMEWORK_PATH
"${QT_CONFIGURE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH}")
endif()
Adjust pro2cmake accordingly.
Task-number: QTBUG-97076
Change-Id: Iac1622768d1200e6ea63be569eef12b7eada6c76
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Certain platform-related variables, in this case UNIX, must be set in a
platform module, because they get cleared after the toolchain file is
loaded. Such platform modules live in upstream CMake, but there is none
yet for INTEGRITY. This manifests in an undefined UNIX variable and
"System is unknown to CMake" warnings for the project and every
configure test.
Add the CMake module "Platform/Integrity" in the cmake/platforms
directory. Add this directory to CMAKE_MODULE_PATH to let CMake load
Platform/Integrity when the toolchain file set CMAKE_SYSTEM_NAME to
"Integrity".
CMake's module directory takes precedence, when loading platform
modules. This is special for platform modules and different from the
documented behavior of CMAKE_MODULE_PATH and include().
In case the user wants to provide their own platform modules via
CMAKE_MODULE_PATH, they can instruct Qt to not add its path by setting
QT_AVOID_CUSTOM_PLATFORM_MODULES to ON.
Make sure that configure tests with project files also load the custom
platform module.
Pick-to: 6.2
Fixes: QTBUG-96998
Change-Id: I9855d620d24dc66353cec5e847a2675b464ace26
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The separate_debug_info configure test uses the CMake variable
CMAKE_OBJCOPY. CMakeFindBinUtils in the test project finds the host's
objcopy despite CMAKE_TOOLCHAIN_FILE being correctly set.
We now add CMAKE_OBJCOPY to the list of variables that are passed to
configure test projects and remove the CMakeFindBinUtils include, which
looks rather internal anyways.
Pick-to: 6.2
Fixes: QTBUG-96798
Change-Id: I164c6bd1771e8789e9dd19b50573b33b8866bd3b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When setting QT_FEATURE_ values we need to convert the user-provided
FEATURE_ values to the one that is supported by QT_FEATURE_.
Pick-to: 6.2
Fixes: QTBUG-96300
Change-Id: Idd19fbf7f23f351a6c1cfdcedccfaaf6b0aa6e44
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This fixes the detection of always available architecture based on
user set CMAKE flags.
Change-Id: I541ac9569766a0fe05f4395c06f2ee3bcd77b035
Fixes: QTBUG-91090
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Don't export the MODULE_PLUGIN_TYPES property only when a module has
an associated configure.cmake file with features. Instead, always
export it if a module defines a plugin type.
This fixes qttools DesignerTargets.cmake file to contain the plugin
types it defines, given that the Designer lib does not declare any
features via a configure.cmake file.
Pick-to: 6.2
Task-number: QTBUG-95668
Change-Id: Ic036c31768e03b51d3bce9c2afe48e04f69f435b
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Passing -DFEATURE_developer_build=TRUE did not add the define
QT_BUILD_INTERNAL to src/corelib/global/qconfig.h like
-DFEATURE_developer_build=ON would.
This happened, because the feature evaluation in
qt_evaluate_feature_definition did a string comparison against "ON".
Normalize both sides of the string comparison, and thus support all
booly values for features.
Pick-to: 6.2
Fixes: QTBUG-95732
Change-Id: Ibf03579c05919b35219438361fc93676b7cca7cc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building Qt for Android on Windows, the precompile_headers test
failed if the source directory was passed as absolute path without drive
letter. See CMake upstream issue #22534.
Work around the CMake issue by ensuring that the path is properly
prefixed with a drive letter.
Pick-to: 6.2
Fixes: QTBUG-95652
Change-Id: I3154b6c0bb2f53533306227074b24fbbf5973b05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_config_linker_supports() repeated the conditions of all use_*_linker
features, because the features are not evaluated yet when this function
is called, and the function needs to know what linker is used to build Qt.
Move the required tests and features before any
qt_config_linker_supports() call and evaluate the use_*_linker features
early.
Change-Id: I306f032356682a0e82e4d7c4234e5bbc820ab143
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously, if a feature was marked as not to be emitted and there was
no user provided value for that feature, the build system would still
save the user provided value in FEATURE_foo with a value of ON (if the
conditions were met).
After a reconfiguration, the build system would hit the code path that
checks if the user provided a value for the non-emitted feature, and
would then warn about it and reset the feature value to OFF.
This would cause errors when reconfiguring a user project, complaining
that a feature value has changed.
Make sure to not save the user provided value for a non-emitted
feature and to always set its internal feature value to OFF.
Amends c4f5762b20
Pick-to: 6.2
Fixes: QTBUG-94921
Change-Id: I257c7fd795c8a6aeba3348cb72522e4f0b006dc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Rename various functions and variables to hopefully make the behavior
of feature evaluation clearer.
The previous names like 'set_value' or 'set_cache_value' or 'cache'
were too generic and unclear. One would have to carefully read the
code to understand what was actually set.
Add some doc comments about what FEATURE_foo and QT_FEATURE_foo
represent.
Amends c4f5762b20
Pick-to: 6.2
Task-number: QTBUG-94921
Change-Id: Ie6a7b83a4d54a83976b2706d4af82b39832d79f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
'ld' only capable to resolve circular dependencies by wrapping the
suspected static libraries and objects using --start/end-group
arguments. We want to detect if linker is 'ld' at configure time to
decide how to link the resource objects if finalizers are not enabled.
The qt_config_compile_test function is extended with an extra argument
since it's required to pass custom cmake flags to the ld-related test.
Pick-to: 6.2
Change-Id: I484fcc99e2886952d8b0232f37e4e6a35d072931
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the future it might be useful to print the config summary entries
of a Qt module configure.cmake file even if the associated module
is not built and thus qt_feature_module_begin is not called.
The repo src/CMakeLists.txt could then use a combination of
qt_feature_evaluate_features and a conditional
qt_feature_record_summary_entries to ensure the that summary entries
are still shown.
Change-Id: I124efc82163ddae48d9e72c70a677ec4c6588fac
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Features that are not emitted in the current
configuration (e.g. plugin-manifests on Linux) should not yield an
error. Instead, print a warning message like Qt5's configure did.
Set insignificant feature to OFF.
Remove the now unneeded emit_if parameter from
qt_feature_set_cache_value.
Pick-to: 6.1
Fixes: QTBUG-88305
Change-Id: I0f2ce152fca5f08417038c9bd2c07639ff6a3df4
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a feature is set in qtbase and is later set to another value,
an error occurs and an error message is given. This patch
changes the error message to contain both the preexisting and the
new value
Change-Id: Ifa9fc1f06bfde40e8fd5dfdf30165d4393abbd28
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This property is dynamically determined and set in the
Qt6${module-name}PluginsConfig.cmake files now.
There is no need anymore to export this property.
Change-Id: I2d164864c4099034b88f9ad852eae8b9f9e55f8b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Add an optional argument to store the report command while feature
evaluation-only stage. This is necessary, because according to the
actual feature evaluation process, evaluation happens only once and it's
impossible to record any command during the evaluation-only stage.
Fixes: QTBUG-90319
Change-Id: I215fbe0a28a2661cd2d97d253b2e2c787d295cbd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Add output of feature condition error at the end of configuration
summary. Introduce qt_configure_add_report_error that may be used
to add error to end-point configure report without actual
configure interruption.
Fixes: QTBUG-88282
Change-Id: Idcf478da863ae6507438eb3370927d7d1f01e071
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Unset all QT_FEATURE_foo values for every build.
If any of FEATURE_foo is different of QT_FEATURE_foo, mark whole Qt
build as dirty. Reset FEATURE_foo for dirty builds to the calculated
value if it doesn't meet its condition.
Set Qt module as NOT FOUND if its target was not created during
configuration.
Main issue with this approach are generated files, that became trash
once the related features are disabled. This especially affects features
that enable/disable Qt modules. FooConfig.cmake files are created and
generate lots of warnings if feature was disabled. We may introduce a
module cleanup procedure at some point.
Fixes: QTBUG-85962
Pick-to: 6.0
Change-Id: Id71c1edb4027b24c6793063e40cc9d612c24ebce
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add '_qt_internal_dump_expression_values' function that dumps all
values evaluated by 'qt_evaluate_config_expression'.
'_qt_internal_dump_expression_values' doesn't evaluate undefined
features, only collect actual values.
Fixes: QTBUG-88476
Pick-to: 6.0
Change-Id: I9d09ffbd9f9fa91bc4f36536c58e7f118b06f9b9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move 'INPUT_' variable detection logic out of
'qt_feature_set_cache_value' function. Use 'INPUT_'
variable to enable/disable related 'FEATURE_' in case if
'FEATURE_' is not defined.
Fixes: QTBUG-88501
Pick-to: 6.0 6.0.0
Change-Id: I1162ac0fb562036898a37b52c3f80229ec8a0970
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
INPUT_ variables enable FEATURE_ variable only in case if valid
"true"-like value is assigned from command line.
Amends dc43061e9a
Fixes: QTBUG-87755
Task-number: QTBUG-88142
Change-Id: I65e85c7548981fdec94366b531f6df6396be71b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
"configure" script translates feature-related parameters to INPUT_
variables instead of FEATURE_.
Both INPUT_ and FEATURE_ variables passed to cmake script are
equivalent. FEATURE_ has higher priority in case if both are defined.
Fixes: QTBUG-87755
Change-Id: If697a0d62ab839877a3196ea74e631582a570dda
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake considers ON/OFF as booly string values regardless of the case.
Make the value comparison in QtFeature.cmake case-independent.
It's now possible to build Qt with '-DFEATURE_gui=off'.
Fixes: QTBUG-87948
Change-Id: I3d948e8219ad9728414803c8c4cd756034073b46
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Very simple AUTODETECT expressions worked fine, but expressions with
parentheses, for example, were not correctly evaluated.
Change-Id: Ibec4fa55474e149a701f861838fdea41d31beca0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This file provides common feature-functionality is supposed to be
included by QtFeature.cmake and QtProcessConfigureArgs.cmake.
Change-Id: Ifb483c2a9c4014d240c2a4d6ff07b5c0ceee9c3a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There was an inconsistency where configuring qtbase on Apple Silicon
with the following command line produced different results rom the
second variant.
$ cmake ../qtbase -DCMAKE_OSX_ARCHITECTURES=arm64
vs
$ CMAKE_OSX_ARCHITECTURES=arm64 cmake ../qtbase
That happened because the CMAKE_OSX_ARCHITECTURES variables was not
passed to project-based try_compile calls. This resulted in compile
tests like SIMD avx to succeeded on Apple silicon, which shouldn't.
To address that, always pass the architecture on macOS if it's
specified.
Change-Id: Ia12e86230cc6e5e11f387e3cbb273d90646ef2e3
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
qdevice.pri should embed info about the Android SDK, NDK, host,
platform api level and ABI.
The machine tuple test should not be run for uikit and Android
platforms.
Sysroot should also not be prepended for uikit and Android
platforms, otherwise it breaks Qt module include paths.
Task-number: QTBUG-85399
Task-number: QTBUG-82581
Change-Id: Ic48c88f6ab15d75c2ebc323c8d7a3b7e5596f3c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Show a status message when we run syncqt for a module (gives a bit
more insight into why the configuration seems to stall for a moment).
Remove some uninformative messages about generating config.h files
and Depends headers, etc.
Change-Id: I5ff2774b9cf5d92ddde564dc09f4197c2835ee4a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This adds the CMake equivalent to the classical -device-option key=value
configure argument:
-DQT_QMAKE_DEVICE_OPTIONS=key1=value1[;keyN=valueN]
The keys and values get dumped verbatim into qdevice.pri.
This patch also ports the machineTuple configure test. Its result is
written into qdevice.pri as value for the GCC_MACHINE_DUMP variable.
Change-Id: I29f2323fd87639fafaed99ec7446c7ee75504705
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The plugin-manifests feature has the "negative" CONFIG value
"no_plugin_manifest". On negation, we're supposed to strip off the
leading "no_" instead of adding another one.
Change-Id: Id2c66da41f22881272d5b923f12b85d9fcc2c9d0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously we checked the LINK_LIBRARIES property of the main module
target, but we should instead use the values of
INTERFACE_LINK_LIBRARIES set on the FooPrivate module.
Because both versionless targets and private targets are interface
libraries, we need to properly differentiate between them when
following versionless targets to their main associated target.
To do that, instead of using string comparison, export an additional
private _qt_is_versionless_target property, and query that.
Also make sure to set and export the _qt_config_module_name property
on the FooPrivate targets.
Also make sure to APPEND to EXPORT_PROPERTIES rather than override
(looking at you QtFeature.cmake).
Task-number: QTBUG-75666
Change-Id: Ia3261e218840e9f5217ab49755e8c876560e294d
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Consider a negated feature config value like the following:
qt_feature_config("foo" QMAKE_PUBLIC_QT_CONFIG NEGATE)
If this feature was disabled, it would turn up in both,
enabled_features and disabled_features of module .pri files.
Also, QT_CONFIG would contain foo.
Expected however is that QT_CONFIG contains no-foo, and only
disabled_features contains foo.
Fix this by prepending a "no_" prefix to the value, similar to the
"no-" prefix in the qmake build. The qt_correct_config function was
adjusted to recognize "no_foo" and translate it to the qmakeish
"no-foo" config value.
Config values that start with "no_" but do not correspond to a feature
are left untouched. You can still have values like
"no_valley_too_deep" or "no_mountain_too_high".
Change-Id: I23d8b18c84e04ea6dfa25cc6ccd8f7e86211b144
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
