QT_VERSION is now at least QT_VERSION_CHECK(6, 3, 0), so remove all
checks against Qt 6.0.0 or earlier. They are superfluous. Tidied up in
some places in the process, particularly #include order.
Change-Id: I2636b2fd13be5b976f5b043ef2f8cddc038a72a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Needed for subsequent change that will check and error out if the
version is lower than 3.16. We do that to ensure all policies
introduced by CMake up to version 3.16 have their behavior set to
NEW.
Pick-to: 6.2
Task-number: QTBUG-95018
Change-Id: Ieaf82c10987dd797d86a3fd4a986a67e72de486a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Having logging in the test's log widget is nice, but we don't want
to silence the normal logging, as that might confuse someone who
expects to see normal log messages, not knowing there's a dedicated
log widget in the test.
Pick-to: 6.2
Change-Id: I7828f740cfb8cc2eae8da98b9b8facd4a57fa37b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This amends 9a4c98e556.
Change-Id: Ief86d141efa8f87d624c6ba935cb4d9c0b2ead0f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
More information about monitor in xrandr 1.5, see
https://keithp.com/blogs/MST-monitors/
Since this change, screen is logical instead of physical.
If xrandr 1.5 and later is installed, Qt screen info will get
from xrandr monitor object instead of xrandr output if only have
1.2 to 1.4.
Users can manipulate monitor as they want, for example, a
combination for two physical screens, half of one screen and etc.
Didn't have chance to access MST monitors, but it should work
if xrandr monitor object was created automatically.
[ChangeLog][xcb] Qt screen info will get from xrandr monitor
object if 1.5 is installed.
Fixes: QTBUG-65457
Change-Id: Iad339cc0d4293b2403b4ef6bf6eb770feb3e685f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add minimal examples which demonstrates how exec() works
on Qt for WebAssembly and how to implement main() without
calling QApplication::exec().
Change-Id: I44f1d16af19c538380cc56faf3f0f4cc9d66cf11
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tests can now be built with qt-cmake-standalone-test.
Change-Id: I098340a9f755806061de281fbc25cb00c61f33f0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For mobile platforms. Makes it quite a bit easier to follow on the
updates when I'm not tethered to my PC with ADB.
Change-Id: Icba03470e6082b6e47e31c9ead6df074407d3172
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Make it return bool since the TriState was really only used signify that
the property was unsupported but there is already a separate way to
check if it's supported. More importantly there is no different set of
actions available to a user if they're in the Unknown or False state.
Because of the change to bool, we also rename the property to have an
'is'-prefix.
Change-Id: Iaaaad5ac31e663c36e00223bf5b0e719f412fc69
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This patch adds the API, with no supporting backends
Task-number: QTBUG-93848
Change-Id: I50454717f928819e1b990df91872675e842f9987
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Supported on OpenGL (and ES) 3.0+ and everywhere else.
Can also be a render target, targeting a single slice at a time.
Can be mipmapped, cannot be multisample.
Reading back a given slice from a 3D texture is left as a future
exercise, for now it is documented to be not supported.
Upload is going to be limited to one slice in one upload entry,
just like we specify one face or one miplevel for cubemap and
mipmapped textures.
This also involves some welcome hardening of how texture subresources
are described internally: as we no longer can count on a layer index
between 0..5 (as is the case with cubemaps), simply arrays with
MAX_LAYER==6 are no longer sufficient. Switch to sufficiently dynamic
data structures where applicable.
On Vulkan rendering to a slice needs Vulkan 1.1 (and 1.1 enabled on the
VkInstance).
Task-number: QTBUG-89703
Change-Id: Ide6c20124ec9201d94ffc339dd479cd1ece777b0
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The initial approach for providing public access to native
interfaces via T::nativeInteface<I>() was based on the template
not being defined, and then having explicit instantiations of
the supported types in a source file, so that the accessors
were exported and available to the user.
This worked fine for "simple" types such as QOpenGLContext
and QOffscreenSurface, but presented a problem in the context
of classes with subclasses, such as Q{Core,Gui}Application.
To ensure that a native interface for QCoreApplication was
accessible both from QCoreApplication and its subclasses,
while at the same time preventing a native interface for
QGuiApplication to be accessible for QCoreApplication, the
nativeInterface() template function had to be declared in
each subclass. Which in turn meant specializing each native
interface once for each subclass it was available in.
This quickly became tedious to manage, and the requirements
for exposing a new native interface wasn't very clear with
all these template specializations and explicit instantiations
spread around.
To improve on this situation, while also squashing a few
other birds at the same time, we change the approach to
use type erasure. The definition of T::nativeInteface<I>()
is now inline, passing on the requested interface to a per
type (T, not I) helper function, with the interface type
flattened to a std::type_info.
The type_info requested by the user is then compared to the
available types in a single per-type (T) "switch statement",
which is a lot easier to follow for someone trying to trace
the logic of how a native interface is resolved.
We can safely rely on type_info being stable between the user
application and the Qt library as a result of exporting the
type info for each native interface, by explicitly ensuring
they have a key function. This is the same mechanism that
ensures we can safely dynamic_cast these interfaces, even
across library boundaries.
The use of a free standing templated helper function instead
of a member function in the type T, is to avoid shadowing issues,
and to not pollute the class namespace of T with the helper
function.
Since we are already changing the plumbing for how a user
resolves a native interface for a type T, we take the opportunity
to add a few extra safeguards to the machinery.
First, we add a static assert in the T::nativeInteface<I>()
definition, that ensures that only compatible interfaces,
as declared by the interface themselves, are allowed.
This ensures a compile time error when an incompatible
interface is requested, which improves on the link time
errors we had prior to this patch, and also offsets the
one downside of type erasure, namely that errors are only
caught at runtime.
Secondly, each interface meant for public consumption through
T::nativeInteface<I>() is declared with a revision, which
is checked when requesting the interface. This allows us
to bump the revision when we make breaking changes to the
interface that would have otherwise been binary incompatible.
Since the user will never see this interface due to the
revision check, they will not end up calling methods that
have been removed or renamed.
One advantage of moving to a type-erased approach for the
plumbing is that we're not longer exposing the native
interface types as part of the T::nativeInteface symbols.
This means that if we ever want to rename a native interface,
the only exported symbol that the user code relies on is
the type info. Renaming is then possible by just exporting
the type info for the old interface, but leaving it empty.
Since no class in Qt implements the old native interface,
the user will just get a nullptr back, similarly to bumping
the revision of an interface.
Change-Id: Ie50d8fb536aafe2836370caacb22afbcfaf1712a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When cross compiling from a case sensitive file system, casing
matters, and mingw headers and import libraries consistently
use lowercase.
This was uncovered by d385158d5213ef568b7629e2aa4a818016bbffac;
prior to that, the schannel TLS plugin didn't end up built (at
least when cross compiling).
Fix other similar cases that can be found by grepping the repo.
Change-Id: Ia696e17b7aaa979d7b7f5b0801383f338a8b585b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
ScreenGadget visualizes virtual desktop screen layout,
in device independent and native pixels.
This can be used to debug the (sometimes surprising)
device independent screen geometry resulting from Qt
applying a scale factor.
Change-Id: I5b18e0fc9a54ba3e14d648794429b2eeadd25748
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Display active environment variables. Reorder the
labels with device independent values to the left
and native values to the right. Display the Qt scale
factor.
Change-Id: If95c252b06eff5abd91a25847777246effe94be2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The use of "Country" is misleading as some entries in the enumeration
are not countries (eg, HongKong), for all that most are. The Unicode
Consortium's Common Locale Data Repository (CLDR, from which QLocale's
data is taken) calls these territories, so introduce territory-based
names and prepare to deprecate the country-based ones in due course.
[ChangeLog][QtCore][QLocale] QLocale now has Territory as an alias for
its Country enumeration, and associated territory-based names to match
its country-named methods, to better match the usage in relevant
standards. The country-based names shall in due course be deprecated
in favor of the territory-based names.
Fixes: QTBUG-91686
Change-Id: Ia1ae1ad7323867016186fb775c9600cd5113aa42
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It turns out QTextStream on Android isn't as easily visible as it is
when going through qDebug (where it can easily be seen with
`adb logcat -v brief libqnetworkinformation_<arch>.so:* -s`)
Change-Id: I3b495d7a3d331fda6cfe602c461107dd1d0b3faf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit 677797929d8080199990d741773832f80a654265)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Since the old code is now fully integrated in QNetworkInformation backends
Change-Id: Ia843d17bb3c98333e8d68752e25722b5860f48e0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(cherry picked from commit 7860b9e6ffece207d054ac0c321bc3c5b983708f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
For Windows. Based on the code I wrote for QNetworkStatusMonitor.
It also renames the netlistmgr feature, avoiding the abbreviation.
Locally my MinGW fails the networklistmanager feature test so it may
not be supported on MinGW, likely leaving it without a backend at all.
Change-Id: I13bbe4127edc2a9c0bb91602c95f1cb206a85a69
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add QRhi APIs to retrieve and reload the contents of the "pipeline
cache".
The only API where there is a true pipeline cache is object is Vulkan
(VkPipelineCache). For OpenGL, the other backend where we support this,
it is simulated with program binaries. The Qt 5 style OpenGL program
binary disk cache continues to work like before, but one has now the
option to do things in a more modern, graphics API agnostic way, that
leads to generating a single blob instead of a large set of files in
some system location, allowing easier "pre-baking" of the cache content.
It is expected that Qt Quick exposes the two new functions in form
if QSG_RHI_ environment variables, thus allowing easy testing and
cache file generation.
As an example for the performance improvements this can give, consider
Vulkan, where we do not have any existing persistent caching mechanism
in place:
Running BenchmarkDemoQt6.exe --scene flythrough --mode demo creates 18
QRhiGraphicsPipeline objects from Qt Quick and Qt Quick 3D.
The total time spent in QRhiGraphicsPipeline::create() during application
startup for these 18 pipelines is 35-40 ms on a given Windows (NVIDIA)
system.
When exporting the pipeline cache contents to a file, and then, in a
subsequent run, reloading the cache contents, this is reduced to 5-7 ms
on the same system, meaning we get a 6-7x improvement.
The generated data is always specific to a given Qt version, RHI
backend, graphics device, and driver version. Much of the implementation
consists of adding and verifying the appropriate header to the blobs
retrieved from the driver, to allow gracefully ignoring data that was
generated with a device or driver that differs from the one used at
run time. This should provide robustness, even if the Vulkan or OpenGL
implementation is for some reason not prepared to identity and reject
incompatible cache/program blobs.
Fixes: QTBUG-90398
Change-Id: I67b197f393562434f372c7b7377f638abab85cb3
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Instead, have a static function in QRhiVulkanInitParams then Qt Quick
and anyone else who creates a QVulkanInstance that is then used in
combination with QRhi can query.
Change-Id: I046e0d84541fc00f5487a7527c97be262221527f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Just to avoid validation warnings on systems where the sampling
a D32 texture with linear filtering is not supported.
This is likely not a problem elsewhere: Qt Quick 3D for example
samples the depth texture only with Nearest filtering already.
Fixes: QTBUG-89761
Pick-to: 6.0
Change-Id: I80bf5b7ecfcb3365f4010daa17f2ef00bb206b74
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Even though there is no D3D-specific logic in the windows platform
plugin, meaning a QWindow with either OpenGLSurface or VulkanSurface
(or anything really) is DXGI/D3D-compatible, it now looks like it is
beneficial, and more future proof, if there is a dedicated surface
type.
As the linked report shows, there are OpenGL-specific workarounds
accumulated in the platform plugin, while not being clear if these
are relevant to non-OpenGL content, or if they are relevant at all
still. (and some of these can be difficult/impossible to retest and
verify in practice)
When D3D-based windows use the same surface type, all these are
active for those windows as well, while Vulkan-based windows have
their own type and so some of these old workarounds are not active
for those. To reduce confusion, having a dedicated surface type for
D3D as well allows the logic to skip the old OpenGL workarounds,
giving us (and users) a more clear overall behavior when it comes
to OpenGL vs. Vulkan vs. D3D.
The change is compatible with any existing code in other modules
because any code that uses OpenGLSurface for D3D will continue to
work, using the new type can be introduced incrementally.
Task-number: QTBUG-89715
Change-Id: Ieba86a580bf5a3636730952184dc3a3ab7669b26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The windows library user32 is no longer a known library for qmake; add
it explicitly.
Pick-to: 6.0
Change-Id: I61f44e8a2cbccbabbdc5d58bd2615b431097aafd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QEventPoint instead of TouchPoint: we have source compatibility for that,
but we can use the new type to avoid the deprecation warnings.
Some position accessors have been renamed too.
Change-Id: I5bfe5bc853931127a883d2bd61fab122495fd427
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Q_MOVABLE_TYPE was conceived before C++ had move semantics. Now, with
move semantics, its name is misleading. Q_RELOCATABLE_TYPE was
introduced as a synonym to Q_MOVABLE_TYPE. Usage of Q_MOVABLE_TYPE
is discouraged now. This patch replaces all usages of Q_MOVABLE_TYPE
by Q_RELOCATABLE_TYPE in QtBase. As the two are synonymous, this
patch should have no impact on users.
Pick-to: 6.0
Change-Id: Ie653984363198c1aeb1f70f8e0fa189aae38eb5c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
It's been deprecated since Qt 4.1.
Task-number: QTBUG-85816
Change-Id: Iafc6340716556f54fc5472c60035bb57461b842f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Move the existing “kitchen sink” test out of the way,
and rename it to “kitchensink”
Change-Id: I121260e640bb2810a94f8112fcea212e97055fb3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's no longer used; the only calls to QApplicationPrivate::desktop
pass the default nullptr for QScreen, so all we need is a Qt::Desktop
type toplevel widget.
Include changes documentation about both the class and QApplication::desktop
being gone in Qt 6.
Change-Id: I22d6e93cabc6aaaefffe5e96942886a2ef4e0609
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In order to prevent too much voodoo in backends like D3D11, the input
layout is expected to specify the slice index for vecX that are part of
an unrolled matrix.
Also deoptimize the instancing manual test to exercise a matrix too
instead of just vectors.
Change-Id: If2dcbcbc483645ce2420b2f87dda765b95da6e80
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The original restriction to UniformBuffer was due to the GL backend
where there is no GL buffer object for QRhiBuffers with usage
UniformBuffer. However, we can still implement this for cases when
there is a true GL buffer object underneath. With other backends it
should all work as-is already.
This becomes useful when one has buffers with usage Vertex that need
full updates every frame. (f.ex. instance data)
Unfortunately this involves renaming the function. But while at it, add
an autotest case as well.
Change-Id: Iff59e4509a8bae06654cc92fe8428bd79eb012fb
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The qsb files seem to be out of date for those two.
Change-Id: Id832e872667cac4d364e13c440011109a6dbdc7f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Draw 25000 cubes while doing a uniform buffer update for each.
Change-Id: I2216641c8bf7c6ea147fe3edd679317b472e1f04
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We were already using the 'native' nomenclature when referring to these
kinds of APIs, e.g. when talking about native handles, or the existing
QPlatformNativeInterface on a QPA level. Using 'native' for the user
facing APIs also distinguishes them from the 'platform' backend layer
in QPA and elsewhere.
Change-Id: I0f3273265904f0f19c0b6d62471f8820d3c3232e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Utility for visualizing and debugging high-dpi rendering
using QPainter, at different (fractional) scale factors.
In addition contains prototype code for mitigating
painting artifacts such as drawing outside the clip
rect when scaling.
Change-Id: I44f39315ad9674790d51413dddf41e3a51043da6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
DprGadget displays the devicePixelRatio for the current
screen using a large friendly font, as well as the
platform and environment inputs used for determining
the DPR.
Change-Id: Id619edad181eb7717f18eb98af341d6582a843a1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As OpenGL ES and Vulkan ruin the day with the spec mandated minimum
value for max threads per threadgroup being only 128, clients need
a way to decide if their compute shader (local_size_*) is suitable
for use at run time.
Change-Id: I72b4fc97032406340623add82ea4d9544ebe9fdc
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It has been in Qt for some years now and 6.0 marks a good point to
enable it by default. The exception is connectToHostEncrypted where we
still require the users to enable it explicitly since there's no logical
way to disable it.
[ChangeLog][QtNetwork][QNetworkAccessManager] HTTP/2 is now enabled by
default.
Fixes: QTBUG-85902
Change-Id: Ia029a045727cc593d77df9eb3a5888522ad19199
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a source incompatible change for widget implementors.
Leaving the old enterEvent as a virtual overload is problematic due to
shadowing. Best to make a clean cut, widget reimplementors will get a compile
time warning if they mark their override as such, or if they try to call the
parent class implementation.
Addresses ### Qt 6 comment.
[ChangeLog][QtWidgets][QWidget] The virtual enterEvent handler now receives
a QEnterEvent, which contains information about mouse position and button
states, rather than a plain QEvent.
Change-Id: I233f594fd79c0c090983b3db8532913d00132fde
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adjusting the QPrinter test case - some use cases no longer exist, or are
already tested in QPageSize and QPageLayout tests.
Adjust examples and manual tests.
Change-Id: I01cbc65f3d8031aea2dac86dd942126ba708b111
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
High-DPI pixmaps are always enabled, and cannot be disabled.
Change-Id: I01a006b404e5431582b64ef812974c1c022b39ae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This attribute is now on by default.
Change-Id: I7c9d2e3445d204d3450758673048d514bc9c850c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The functionality should be available via QWidget::winId(),
and QWidget::createWindowContainer() + QWindow::fromWinId().
Any bugs in this area should be fixed by improving the general
wrapping APIs.
Fixes: QTBUG-83254
Change-Id: I86584a4a8138d17d65a50da39efd58039f10da91
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...now that a recent path enables MultisampleTextures for ES >= 3.1 and
GL 3.x and up.
Just need to make sure the .qsb contains something for OpenGL as well.
While we are at it, make updated .qsb files for all the commonly used
shaders since what we had before was version 4. Bump them to version 5.
Change-Id: If2040f4894e6360d1ebd5daf7e698508e5e6e42e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Follows the QWindow semantics, and is a replacement for creating
a QWidget with a QDesktopScreenWidget as the parent.
We can now remove much of the special handling of QDesktopWidget and
the Qt::Desktop window type, and get rid of QDesktopScreenWidget.
Add a manual test that allows local testing. Our CI environments
only have a single screen, and no multi-head display server setup
which is the primary case where QWidget::setScreen is interesting.
For the more common case of a virtual desktop, QWidget::setScreen
has no real impact (just as QWindow::setScreen doesn't).
Change-Id: Id0099e069d316741bacd8c795c396ccad37be297
Fixes: QTBUG-85483
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QFontDatabase is a singleton and all instances would share
a single, mutex-protected global data pointer. But some functions
were implemented as non-static functions. This caused a lot
of code on the form
QFontDatabase().families(...)
since there was no static access. Other functions were implemented
as static.
To consolidate, we make all functions static. This should be
source-compatible, but not binary compatible.
[ChangeLog][QtGui][Fonts] Some functions in QFontDatabase were in
principle static, but previously not implemented as such. All
member functions have now been made static, so that constructing
objects of QFontDatabase is no longer necessary to access certain
functionality.
Fixes: QTBUG-83284
Change-Id: Ifd8c15016281c71f631b53387402c942cd9c43f6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Don't attempt the remote test if we don't have a remote server.
Don't add error returns from read to byteCounter.
Don't cast from ASCII to QString in URL components.
Don't waste time encoding a path for which it's a no-op
(especially as I recently deleted the method used to do it).
Name the time-out, both for clarity and to give anyone who needs to
debug the test only one line to edit so as to increase the time-out
enough to make debugging practical.
Change-Id: I378aa96c0501f7033ca4abb82734b03b8c807f08
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Two methods that have gone away or been renamed,
an enum that now doesn't support being assigned from int.
QTime should no longer be used as a timer.
Removed a test of deprecated code that's gone away.
Task-number: QTBUG-85700
Change-Id: Idc6d59542625d22b9937084411b54b0d8aa87f00
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Deprecated since 5.0. Renamed a function in a manual test that no
longer needs to say it's Qt5-specific.
Change-Id: I6f2159c702f389d378a0e4d86bd4fe633298b100
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Exercise the touch settings of the native interface.
Task-number: QTBUG-41433
Task-number: QTBUG-48849
Task-number: QTBUG-83252
Change-Id: I5ae95a79c00b55236dbbed9d8549f4fdf5b10b8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The API is available by including qopenglcontext.h as usual,
but scoped in the QPlatformInterface namespace. The namespace
exposes platform specific type-safe interfaces that provide:
a) Factory functions for adopting native contexts, e.g.
QCocoaGLContext::fromNative(nsContext, shareContext);
b) Access to underlying native handles, e.g.
openGLContext->platformInterface<QCocoaGLContext>->nativeContext()
c) Platform specific functionality, e.g.
static QWGLContext::openGLModuleHandle()
openGLContext->platformInterface<QEGLContext>->doSomething();
The platform interfaces live close to the classes they extend,
removing the need for complex indirection and plumbing, and
avoids kitchen-sink modules and APIs such as the extras modules,
QPlatformFunctions, or QPlatformNativeInterface.
In the case of QOpenGLContext these platform APIs are backed
by the platform plugin, so dynamic_cast is used to ensure the
platform plugin supports the requested interface, but this is
and implementation detail. The interface APIs are agnostic
to where the implementation lives, while still being available
to the user as part of the APIs they extend/augment.
The documentation will be restored when the dust settles.
Task-number: QTBUG-80233
Change-Id: Iac612403383991c4b24064332542a6e4bcbb3293
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- stop using deprecated accessors in QTabletEvent and QMouseEvent
- position() and globalPosition() provide high resolution so
we don't need to display hi-res global pos separately
- keep a pointer to the last-seen QPointingDevice instance
rather than copying fields out of it; it will only be deleted
if the platform plugin does that (usually only at exit or
when it's unplugged)
- show seat ID
- show platform-specific device ID
Change-Id: Ic34e1d1256d6956867992db831c2e66bdda7001e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The QPair changes trigger warnings about size_t vs. quint32.
We made offsets and sizes 32-bit in the QRhi API to emphasize that
some of the graphics APIs are using 32-bit sizes still. It's a bit
unfortunate that pairs now generate warnings when the size does not
match. Just cast as needed.
Change-Id: I88504eed8be6f4bdb2205b3671e2c2a9db9fcb1e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QLayout::setMargin(x) call has been deprecated since Qt 5.13.
It was an alias for setContentsMargins(x, x, x, x) so we just
replace it with that.
Change-Id: I1c89eebfe776e0e3c8d0bdc19244bd452db4ef3c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
For historical reasons we use build and release instead of create and
destroy. This becomes confusing now that more modules in Qt start taking
QRhi into use. Migrate to the more familiar naming, so those who have
used QWindow or QOpenGLContext before will find it natural.
Change-Id: I05eb2243ce274c59b03a5f8bcbb2792a4f37120f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When storing a void* pointer to the texture handle, we had
to ensure that the variable would exist until the build phase,
which is error prone and caused errors in QQuickWidget because
we copied the texture ID from the FBO into a local variable
before passing it into QQuickWindow::setRenderTarget().
The reason for using a void* was that we cannot know the width
of the handles in the different backends, but we do know that
they are 64-bit at maximum, so instead of storing potentially
dangling pointers, we just make it a 64-bit integer and cast
it back and forth in the backends.
Task-number: QTBUG-78638
Change-Id: I7951e24351ddb209045ab6197d81eb1290b4da67
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It simplifies the API and reduces surprise to have rotation working by default.
On Android, the manifest specifies which orientations the application has
been designed to support; on iOS, it is controlled via the
UISupportedInterfaceOrientations property list key.
In addition, QWindow::contentOrientation() is another way to give
a hint to the window manager, or on iOS to directly control whether
the window's rotation is locked or not.
Task-number: QTBUG-35427
Task-number: QTBUG-38576
Task-number: QTBUG-44569
Task-number: QTBUG-51012
Task-number: QTBUG-83055
Change-Id: Ieed818497f686399db23813269af322bfdd237af
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
All remaining pieces are gone, configuration included.
Relevant CMakeLists and configure.cmake were regenerated.
Fixes: QTBUG-76502
Change-Id: I667b5da7e3802830d236d50b5e9190c2ee9c19e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- QPainterPath needs an explicit include now
- QTabletEvent::device() is deprecated
Change-Id: I2d1086847ee2cf5ed63e345c7c2d6eb43897f0e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Duplicating the number of classes is a high price to pay to be able to
have some QAction functionality behave differently, or be only available
in widgets applications.
Instead, declare the entire API in QtGui in QAction* classes, and
delegate the implementation of QtWidgets specific functionality to
the private. The creation of the private is then delegated to the
Q(Gui)ApplicationPrivate instance through a virtual factory function.
Change some public APIs that are primarily useful for specialized tools
such as Designer to operate on QObject* rather than QWidget*. APIs that
depend on QtWidgets types have been turned into inline template
functions, so that they are instantiated only at the caller side, where
we can expect the respective types to be fully defined. This way, we
only need to forward declare a few classes in the header, and don't
need to generate any additional code for e.g. language bindings.
Change-Id: Id0b27f9187652ec531a2e8b1b9837e82dc81625c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use range-based for and fix deprecation warnings.
Change-Id: I54152b2598e9e4a7a3cc9db9b7072bbabcef7fcf
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I399b5ea56e9255e775ca1746632f7421519a6616
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
This particular test may serve as sample code in various materials in
the future, therefore it is highly beneficial if it is kept in good shape.
Make it easier to read, more compact, and split up among the natural
boundaries of the functionality (global setup in main, window+swapchain
management in Window, graphics resource setup and draw call recording
in HelloWindow).
Change-Id: I2451d3961a01131dcbffe66baf23d2cf9bfd077f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Use nullptr, range-based for and replace typedef by using.
Fix duplicated setting of option. Replace deprecated API.
Change-Id: I2628e8b41e64e9809b2f405dfd2be6bee18b048c
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This can be used to create custom client side window decorations.
Refactors the xcb implementation to use edges instead of corners and we now use
the last mouse position for `root_x` and `root_y` in the `_NET_WM_MOVERESIZE`
event. Touch has also been changed, so just pick a point that's currently being
pressed.
The workaround for QTBUG-69716 has now been moved to QSizeGrip, as the comment
in the bug report says that it should ideally be fixed at the widget level.
On Windows, we no longer abort when GetSystemMenu returns false. I assume this
code was added to check whether the window didn't have any decorations and not
resize in that case. However, since the point of this patch is to let windows
without native decorations resize/move, it makes most sense to remove the
check.
Adds a manual test, which calls QWindow::startSystemMove and startSystemResize
on touch and mouse events.
[ChangeLog][QtGui] Added API for starting interactive window resize and move
operations handled by the system.
Fixes: QTBUG-73011
Change-Id: I7e47a0b2cff182af71d3d479d6e3746f08ea30aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
They are now version 4, which is hopefully the final format,
relying on nothing but QDataStream.
Except for the qshader autotest which tests all the 1..4 versions
and so needs appropriate test data.
Also unifies the batch file naming.
Change-Id: Iec478be86d14dbec7ffb9d5f9b62c14fca5d7c9e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
What's more, demonstrate two types of rendering to a cubemap:
one by one to each face, and by attaching all faces as color
attachments in one go.
Both are used by Qt Quick 3D in connection with shadows, so this
proves that the same is possible to implement with QRhi.
Task-number: QTBUG-81261
Change-Id: I5c7077224d7cae0dd6ea02ac30a9e6f9f1f0c229
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Uses the two compute shaders from Qt Quick 3D. Demonstrates
and tests both RGBA16F textures and using them (and doing
load/store with mip levels individually) in combination with
compute.
Task-number: QTBUG-81213
Change-Id: I3f0f250d5997a26c857b7c45517684c63b44e58e
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
In order for SE_TabBarTabText to correctly calculate the space available
for the text it needs to get the rectangle of the tab directly instead
of relying on the option's rectangle as this may have been modified
before this point. Therefore we introduce QStyleOptionTabV4 to be able
to store the index as part of the option so it can be queried directly.
[ChangeLog][QtWidgets] Added QStyleOptionTabV4 as a subclass of
QStyleOptionTab so that the tab's index information can be obtained.
Fixes: QTBUG-50637
Change-Id: If705f5069fdd14eeccf06bc63dba4e8d2e704359
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
Every Qt::CursorShape is supported.
Tested in Chrome, Firefox and Safari.
Change-Id: I38c9024dba4af70af789ac84ad7e38f749c847d7
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Turn the Metrics widget into a QTabWidget and add a tab logging
all changed signals of QScreen.
This is useful when for example debugging issues with lock screens and
laptop hibernation.
Task-number: QTBUG-79248
Task-number: QTBUG-76902
Change-Id: Ie86789fe1514cb3333a5f3def7f613f217fa6802
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The new version takes/returns a value that can be unpacked and passed to
other functions without knowing which backend is in use.
The old API will be removed in a later change when dependent modules have
been updated
Task-number: QTBUG-78570
Change-Id: I18d928ceef3cb617c0c509ecccb345551a7990af
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
