Modal dialogs can now tested by just showing or running exec().
Remove connection of accept() from applySettings().
Change-Id: I5e3c0e6405ce5682f39d10a9c06b9d61be10ed3f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
make sure we keep track of when we can load root certs and when we
cannot (we cannot when the developer set the certs explicitly). This is
implemented the same way for QSslSocket already, and needs to be
duplicated because we have 2 methods for setting CA certificates: one in
QSslSocket and one in QSslConfiguration.
In addition, adapt the auto test which checks whether setting a default
QSslConfiguration works: There is no way to set on demand loading
through the API, so it should be enabled by default.
Task-number: QTBUG-29103
Change-Id: I5146128aaa385dfcc0ad1e0ef81a92d9350ec5f2
Reviewed-by: Richard J. Moore <rich@kde.org>
Keep the non-modal file dialog around and delete only on request,
such that one can simulate repeated invocations of show() on
the same dialog for testing native dialogs.
Change-Id: I80d0f1dfafbc02a31be192098121654a01025174
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
This patch allows single selection to be cleared with the normal
control modifier. This affects e.g QTreeView and QListView.
Task-number: QTBUG-8836
Change-Id: I7fd50b987acc3552b36657409568192763257536
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add a command line program allowing to test rename, copy, etc.
Task-number: QTBUG-28246
Change-Id: Ie9667f03b65a874475700ec9ecd91ca2ed32ed97
Reviewed-by: David Faure (KDE) <faure@kde.org>
move QT+=widgets (and printsupport) statements before the install
statements, and de-duplicate some cases.
also move some TARGET assignments to a more conventional place.
Change-Id: I6140d8611680f66c24490e5894e4eb90cae95635
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In SHA 51914375b6 the rubberband
selection was fixed, so it followed the scene-point on mousemove.
However wheelEvent could move the view - but avoid update of the
rubberband (that would not be updated until next mouse-move).
This patch fixes that (and generally improves rubberband behavior)
since QGraphicsViewPrivate::mouseMoveEventHandler is called by
replayLastMouseEvent, which is called from various places,
where we need to update the rubberband (e.g scrollContentsBy).
Change-Id: I1b78c27edaaecea797a2319086d7a11d437d2bd3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There are two ways to register a type: using Q_DECLARE_METATYPE(T) and
using qRegisterMetaType<T>("T"). Doing one thing in one translation
unit and another thing in another TU constitutes an ODR violation,
because the value of QMetaTypeId<T>::Defined will differ in the two
TUs.
By adding the information whether a type was declared with
Q_DECLARE_METATYPE to the typeFlags(), such a use will trigger
the existing binary-incompatibility failure that checks for
equality of the incoming type flags with the stored ones (if any).
I had to encode the type as a defaulted function argument in order
to avoid the linker merging instantiations of the function templates
and therefore rendering the detection moot.
Change-Id: I82017caf300458b411cc8ac2f6653536fac64117
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Manual tests are not supposed to be run by "make check"
Change-Id: I0539b94f5286e89ddad2edf487d4b0d82fc2f374
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Bring Qt 5 on par with Qt 4, prepare for more comprehensive
support later on.
Introduce device independent pixels (dips), device pixels,
and devicePixelRatio. Add high-dpi support to QPainter,
QGLWidget, the cocoa platform plugin, mac and fusion styles.
Dips are similar to CSS pixels, Apple points and
Android density-independent pixels. Device pixels
are pixels in the backing store/physical pixels on screen.
devicePixelRatio is the ratio between them, which is
1.0 on standard displays and 2.0 on "retina" displays.
New API:
QImage::devicePixelRatio() and setDevicePixelRatio()
QPixmap::devicePixelRatio() and setDevicePixelRatio()
QWindow::devicePixelRatio()
QScreen::devicePixelRatio()
QGuiApplicaiton::devicePixelRatio()
Change-Id: If98c3ca9bfdf0e1bdbcf7574cd5b912c9ff63856
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It's again possible for QWindows and widget windows to go into
fullscreen mode on the Mac.
Change-Id: I7b304a135838394ef0392f89be4f225f2949fad3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
We should consider the scene-position when we are expanding
moving a rubberband. If the user does some auto-scroll
(Qt should support that itself, but that is another matter)
then the rubberband should not keep the (old) local position
to calculate the rubberband extension, but instead use the
scene-position that was actually clicked.
Change-Id: I04a2df6a1edae8b3587e1ac2104c7fe4ccfb7762
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If we are reacting on the sectionResized signal and we call
setDefaultSectionSize we should ensure that we are not moving
the mouse-cursor.
This is an improvement of f8f6acb05c
Change-Id: I1adee7821bc8fcc9633f692bfd515f2c458b12c8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patch fixes the manual move of sections when auto scroll is on.
It is done in QAbstractItemView::doAutoScroll by letting the
qheaderView use its parents scrollbars if they are childs of a
QTableView or QTreeView.
Task-number: QTBUG-993
Task-number: QTBUG-1103
Change-Id: I70d999d9a07c3566e42d01cc5ebb47a69a83d9d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Enter handling requires knowledge of the mouse
position. Extend the enter handling of
QWindowSystemInterface to receive the position
(implemented for Windows, XCB and Mac), passing it
on to QEnterEvent. Dispatch QEnterEvent from
widgets code.
Change-Id: I49c07d2b1f46310c877017dd55d4cd7d636bdbce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
a) Use the new Qt5 OpenGL API for testing of GL painting
b) Simplify: Use the higher-level QBaselineTest API instead
of the low-level baselineprotocol API.
Change-Id: Ib5f47f6fe68837dfdc8dc3a74638c5cb0b724614
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This prevents the user of moving the leftmost column.
There will be no API to allow move of the tree-structure.
It is very weird to do that, so it shouldn't be a problem.
In case it is a big problem somewhere it can be hacked with:
QTableView unused;
unused.setVerticalHeader(tree->header());
tree->header()->setParent(tree);
unused.setVerticalHeader(new QHeaderView(Qt::Horizontal));
Task-number: QTBUG-332
Change-Id: I3a251c8d0fd472ec0ad7edb20a7f3e00af7e0da8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fixed menu handling on Cocoa so if a menu is enabled/disabled or made
visible or not then it will keep this in sync with the appropriate
native menu entry.
Change-Id: If269185fcf065fb1b2f60d6ef8c27c107eb4509f
Reviewed-by: Pasi Matilainen <pasi.matilainen@digia.com>
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Adding QCheckBox, QComboBox, QLineEdit etc. into an HBox layout or grid
layout makes the layout look like a snake's trail. Fixed the positioning
of these widgets to make the layouts visually more appealing.
Updated qmacstyle auto-test accordingly.
Task-number: QTBUG-13635
Ammended-by: Gabriel de Dietrich
Change-Id: I89461f9aad68ea8488070ed06257b9b8e7f493c5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
It's necessary to set the fieldGrowthPolicy on the QFormLayout in order
to have expanding fields on the Mac. Geometry formatting with
negative x and y values looks better. Display fewer
decimal digits for double fields.
Change-Id: Icb252c0c3fb7b605253e04c3361beba124570840
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Added a test for QMacCocoaViewContainer which will enable the testing
of the fixes coming
Change-Id: I73e9540bc58411634f0da7d398eca4b7ffafba8e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Shows property values in fields which auto-update when the properties
change.
Change-Id: Ib97566a74cb8d0fff5f85bf97783e89dfb07481f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Remove some subprojects that have missing dependencies or use API that is
non-available on Windows CE.
Change-Id: Iad7118b95a691a433c3f798d56a6a069e5e41917
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When a parent item had its visiblity toggled, then the child item would
not update if the parent item had ItemHasNoContents and
ItemClipsChildrenToShape set. This is a common use case in declarative as
the root item has ItemHasNoContents set.
Task-number: QTBUG-26846
Change-Id: Id6592ebc4ba2caa4331a4a71f7247e40993131b6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
