Expanding on the change fixing QTBUG-24762 with the realization that any
line needs to be drawn in a consistent way regardless of system or
painter clip, not just dashed lines.
Task-number: QTBUG-25036
Change-Id: Ief7ef19cc92c52e7d792500a581a072ba032767e
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
We need to clip lines to the unclipped device rect in the case of
dashing, since otherwise the dashes will be shifted and rendered
differently when partial repaints are done.
Task-number: QTBUG-24762
Change-Id: I3599b54baa552acc20bf8cc2e12f846b45f6019e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I95b8b4b674e85b2b3c374931f6231d60f35be984
Reviewed-by: David Faure <david.faure@kdab.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to do bounds comparison on the actual offset we're going to use
with _mm_load_si128 to read 16 bytes from memory (even though we won't
use the trailing bytes in the end).
Task-number: QTBUG-28324
Change-Id: Id0d6094da796ca67338d8ad225fa6b2f309bbe6e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A 180° rotation results in a TxScale QTransform with negative scaling
factors (x=-1.0 y=-1.0). This is not properly handled by blitter paint
engine yet, so use software rendering fallback in this case.
This rendering issue can be seen when using "-webkit-transform" CSS
property in WebKit with DirectFB QPA platform.
Change-Id: Iee496b6bf0c90ffe36c4235ceaa2c80f296b2ca4
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Use the Qt4CompatiblePainting render hint when painting with QPainter to
treat default constructed QPens as cosmetic still.
The NonCosmeticDefaultPen render hint gets documented as obsolete, since
it was in any case not respected by the raster nor OpenGL paint engine.
Change-Id: I04d910e9700baf7f13a8aac07a3633014bb9283e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Qt 5 is the time to get rid of all the old inconsistencies in the raster
paint engine caused by trying to preserve the old X11 based
coordinate system where (0, 0) is in the center of the top-left pixel
instead of the upper left corner of said pixel. However, this was only
adhered for line drawing and path / rect filling, and not for image or
pixmap drawing and not at all when doing antialiased painting. By
defining the antialiased coordinate system as being the right one and
letting the aliased fill rules follow from that we finally end up with
some consistent behavior that doesn't lead to surprises and workarounds
in application code.
It is still possible for applications to get the old behavior by
setting the QPainter::Qt4CompatiblePainting render hint. This should
make porting easier for the few cases where an application relies on the
aliased fill rules we used to have in Qt 4.
Task-number: QTBUG-27500
Change-Id: If86b95e77d838ec83033d64af86632b9a73c74a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This case has typically required specific work-arounds in other
rendering paths as well.
Task-number: QTBUG-25153
Change-Id: I217e710a30222792ebca3bf297e438d944c32992
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Expecting results were not correct. The test is passing.
Task-number: QTBUG-22362
Change-Id: Ie41c262019f76aace9062d7897d7934dc7437c3a
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
A horizontal line should round up at the same time as a vertical line
with square cap, when rendering at subpixel coordinates. Thus, the
special casing in the cosmetic stroker of offsetting by half a pixel
should be for flat caps instead of for square caps.
Task-number: QTBUG-26013
Change-Id: Ic09249337f814c7de95a17976ec9e651561a744b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Changing it outside of the test function definition to avoid running
empty/inapplicable test functions.
Change-Id: I713560cde7f715696984ed082d682900f5f1bcdd
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
removed printsupport tests for wince as there
is no print support on wince and removed the special
handling for wince from 4.8 on some tests as the dependent
modules are not part of qt base anymore
Change-Id: I4ffb22da11f98beee1013f775cb5ce4b936d3211
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Cached font was used regardless of the format, resulting in incorrect
advance in some cases when default format differed from the cached
format.
Task-number: QTBUG-24188
Change-Id: I39e4156bd9ba743afa7e106e934c90227fbf2b8b
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
These unit tests do not depent on QtWidget.
Change-Id: I95526125c563885c0531da7ebfee06bca9a87b1c
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Be explicit about skipping the test when no default printer is present.
Change-Id: If69b275eb0f490411471ec42798d8aefcc57fd83
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Marked the following tests insignificant due to failures, these need
to be fixed later and then re-enabled:
tst_QPixmap
tst_QClipboard
tst_QWindow
tst_QGuiApplication
tst_QPainter
tst_QPrinterInfo
tst_QPrinter
tst_QOpenGL
tst_QFontDatabse
tst_QFontMetrics
tst_QGlyphRun
tst_QRawFont
Task-number: QTBUG-24128
Change-Id: I39ade8a693c4580b5cd618624e892cdcac21d78c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: I6d69ac96597f27575dd40e4c80c982f06fa88f51
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: If75ae2b8e39f6388f4e84ed4aa2681b5a5917e81
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Commit d52fd497f6 introduced a call path to
QPaintEngineEx::drawStaticTextItem, which has a bug in using the pen's color
instead of the entire brush.
This patch replaces the use of the color with the pen's brush().
Task-number: QTBUG-23450
Change-Id: Ieb3bf352c840ff0d3fb4ac678caf7b13f4f9a8f1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
GCC 4.6 fails to build the test because of narrowing conversion.
Change-Id: I927693789be7f3df7bd1a96c8924fc04716a03f0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Failing tests are marked with CONFIG+=insignificant_test.
tst_QTextLayout currently asserts, so it has been disabled to prevent
destabilization of the CI system.
Change-Id: I7bd836ee14085689c8a0f0ce8e3c80d81a55eb94
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
libstdc++ provides the fenv.h found and for uclibc default toolchains
the bits/c++config.h has _GLIBCXX_HAVE_FENV_H undefined leading to
no import of the uclibc fenv.h
Change-Id: I53173b099f3d8791f527f1ccb60991de57cd19db
Filed: https://bugs.busybox.net/show_bug.cgi?id=4484
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The previous fix a05270f435 is not correct,
QPainterPathPrivate(other) should be QPainterPathPrivate(), as there
is only a default ctor for QPainterPathPrivate and ref is initialized there,
use copy ctor just copies the ref value which makes all detach() calls broken.
Add an unit test for this as well.
Change-Id: I658f0a977664d5ec523af3f8a48c1a866eda6ab0
Reviewed-by: Martin Jones <martin.jones@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qprinter test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: I74cc30dc26b8b83852b3516f8def995eab19cf0f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
