QTableView drew additional grid lines on the top and left side when
the corresponding header was not visible and the ScrollMode was
ScrollPerItem. After 8f2bacea41 they were
also drawn for ScrolPerPixel for consistency. But they are not needed at
all and only create visual artifacts.
Therefore remove the drawing of the additional lines completely.
Fixes: QTBUG-74706
Change-Id: I5c77d53a2eeefab9b9bfe0efea6439f5afede4ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Ctrl+End moves the visual index to the bottom left index. This does not
work correctly when the item in the bottom left is disabled. It should
be fixed with 7863be3115 but does not due
to a typo.
Fix the typo by using the newly calculated visualColumn instead the
initial column.
There are cases where the algorithm still does not work as expected when
there are more disabled items but fixing them would add a lot of
complexity with no (much) gain.
Fixes: QTBUG-72400
Change-Id: Ie90f6b3e41e00f54e826c2b4e7303e85ac1e4115
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QMetaObject::newInstance returns a QObject, thus it's not possible to
create a new instance of a Q_GADGET using this function. Previously, we
returned a non-null QObject pointer for such scenarios, which then
leads to crashes when one tries to use it. Now, we check whether the
meta object inherits QObject's meta object, and error out early
otherwise.
Change-Id: I7b1fb6c8d48b3e98161894be2f281a491963345e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the constructors, destructors in favor of member initialization.
Change-Id: I323826328fb783ea2cd931c0e6aad45a98a2ebeb
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Can be used to make smaller binaries, and possibly speed up ARGB32
rendering on some platforms.
Change-Id: I7647b197ba7a6582187cc9736b7e0d752bd5bee5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Extend the history by a persistent model index list
reflecting the selection.
[ChangeLog][QtWidgets][QFileDialog] The widgets-based dialog now
remembers the selected files when navigating the history
Fixes: QTBUG-71415
Change-Id: I86774439be070c1b922acd0e9a27d029f02f68d3
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
A new 'pointerId' is assigned to the stylus every time it enters
tablet's proximity. But applications expect this ID be constant,
at least during one application run. Therefore, it needs to use
'sourceDevice' instead.
Basically, WinInk doesn't have an ability to distinguich two
different styluses connected to the same tablet. We cannot do
anything about it, it is supported only in WinTab.
Task-number: QTBUG-74700
Change-Id: I8328f1e5102b037b370082e69e965ab68b487882
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
The central loop starts by reading five bytes; but
the loop condition only checked that four were available.
Change-Id: I244cecacabeffbac10ad94081f32847f912d95d9
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk@qt.io>
When installing directories, QINSTALL must not ignore contained hidden
files to be consistent with the old INSTALL_DIR.
Fixes: QTBUG-66835
Change-Id: I3a7c952dcac9732d5b17c5a258f87ca277b388d2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
/GM at one point apparently was set by default for debug builds. However,
nowaways it's officially deprecated and even generates a warning in
Visual Studio 2019; so we don't have to 'unset' it specifically anymore.
Change-Id: I5b9b93c058c2ee8a5e025da43251d3859acbe061
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The comment hints that it's fixing an issue in Visual Studio 2013, which
we don't support anymore.
In all supported Visual Studio Versions -Gm is actually deprecated
anyhow, and not set anymore by default. So I guess it's safe
to remove the special handling here.
Change-Id: I2e8ff85350ba651d9a763aabba7b6494ba88d82e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qprintengine_win.cpp(1117,14): warning: comparison of two values with different enumeration types in switch statement ('QPrint::DuplexMode' and 'QPrinter::DuplexMode') [-Wenum-compare-switch]
case QPrinter::DuplexShortSide:
Change-Id: Ib5028d80ecf7f6bb9eb0562e5c137acfeb709a14
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This patch updates the code from the deprecated QRegExp class to
QRegularExpression.
Task-number: QTBUG-25485
Change-Id: I946790f50c6b14787bca31771de5e3a0d5fefe4c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit bcd2fa484a.
There was a report that this caused infinite recursion on some
systems, so we revert it for now and re-add it later when the
issue has been resolved.
Task-number: QTBUG-74983
Change-Id: I747e0437232d72d7a87eb602b10fa09c7130ce8f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Leads to a huge loss of context for people trying to understand
and maintain that code. Replacing with proper types to ensure
better readability and maintenance.
Change-Id: I9900b743e8b7fe11bcc7db9ce3191c89f8718afc
Reviewed-by: Mike Krus <mike.krus@kdab.com>
to test different h2 modes: "h2c" (clear text with protocol upgrade),
"h2" (encrypted, negotiating via ALPN extension), "h2-direct" (encrypted,
no ALPN), "h2c-direct" (plain text, no protocol upgrade). This patch-set
is an amendment to the recent fix in the protocol handler where we were
crashing in "h2c-direct" mode.
Change-Id: I3ff5ed1396a59b72b59a95f927d404ccd202d0b8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We were using low precision dx/dy for calculating the starting point which
meant we could be off when clipping at high scale factors.
Fixes: QTBUG-60782
Change-Id: I883f9aed1346fdffae070b6316ea808b83519701
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Updated to https://github.com/thiagomacieira/tinycbor commit
ac9369d8ec8511bc7516266ae6b07f7da860c954.
Fabrice Fontaine (1):
fix undefined encode_half in json2cbor
Pedro Oliveira (1):
Fixed minor error in the example code.
Svyatoslav Phirsov (2):
Typo fixed in stdlib fread(...) usage
typo in dumprecursive return type
Thiago Macieira (9):
Install the tinycbor-version.h header.
Update version number for a possible but unlikely 0.5.3 release
Fix#137: off-by-one error in UTF-8 decoding
Update Travis CI to Ubuntu Xenial
Pretty: fix use of uninitialised variable
Validation: fix out-of-bounds access when content ends in a string
Parser: apply the same memory-check update
Tests: remove useless comment
Tests: Catch an earlier QCOMPARE failure in compare()
phirsov (6):
Fix off-by-one causing buffer overflow in open_memstream
Protect macro argument expansion using parentheses
eliminating misleading messages in case .config file not yet created
Run check silently in Travis
Make AppVeyor test suit run silent as in Travis
enhancement #149 implemented: access half-precision floating point data as single float
Change-Id: I9e3d261ad9bf41cfb2b6fffd159088f1cc9b3b02
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test changes the current directory to the test directory
in fromUserInputWithCwd(), but did not restore it, causing:
Totals 898 passed, 0 failed, 1 skipped, 0 blacklisted, 368ms
********* Finished testing of tst_QUrl *********
QTemporaryDir Unable to remove "C:\\TEMP\\tst_qurl-ryVxqu" most likely due to the presence of read-only files.
Restore the old directory at the end to fix this.
Change-Id: I62669868f3c6d97dd38ebac76515428c14b7e1e7
Reviewed-by: David Faure <david.faure@kdab.com>
Move the code returning whether a popup should use the full
screen to QStylePrivate and use for QMenu and QComboBox.
Task-number: QTBUG-73231
Change-Id: I1901ecedfa90edf16329ce3b13ef4abea5ab44e8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The native Windows allows for typing in http[s] URLs directly (without
checking existence). Pass these up.
Fixes: QTBUG-71785
Change-Id: I60237bab596ca3f52e6f513f17544ff94e9080da
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Add a helper for replacing "::" by "." for Python.
Task-number: PYSIDE-797
Change-Id: I017d430b0b8b2ffbbd3300d583603924fee4d479
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Use the language helper for dereferencing pointers and end of line.
Task-number: PYSIDE-797
Change-Id: Icbca9015f2a3e8800ad4a56edf8fef9ee43f4528
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Store the result of QStyleHelper::dpiScaled() or functions dependent on it
in a variable, preparing the addition of a DPI parameter.
Task-number: QTBUG-45055
Change-Id: Ic70d65b590793c29a4b1f7a7a5312dd169517fc5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
...like the install commands before Qt 5.9 did.
This ensures consistent permissions. Also, we can throw away the code
that took care of removing and re-adding the read-only flag on Windows.
This reverts commit a0b5d6e60f with the
addition of preserving permissions when copying directories to properly
install app bundles (QTBUG-74912).
Fixes: QTBUG-74733
Task-number: QTBUG-74912
Change-Id: Iee6d7c5e86787dd3ada5e5e9441209d418100b1f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QNetworkDatagram was introduced together with
these methods in Qt 5.8 (commit 4da2dda2aa)
Change-Id: I454c26ebf6f94988cada8ac9315db1d43a31a595
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current mouse buttons state was being retrieved from WPARAM
for all mouse messages. However, for non-client messages this
parameter contains unrelated information, which resulted in
non-client events reporting incorrect button state. Changing it to
retrieve state using GetAsyncKeyState() for non-client messages,
like in the legacy mouse handler implementation.
Fixes: QTBUG-74649
Change-Id: Ia246164208707072e584dd521697e9d31d3e65ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTimer::singleShot is optimized for zero timeouts when using the API
taking a string method name. This optimization was not used for the API
taking a PMF or functor. This patch adds it, making the various API
calls behave similarly from a performance point of view.
The approach taken here requires a QObject context object. If none is
available, e.g. a nullptr was passed explicitly, or the
QTimer::singleShot(O, Functor) API was used, the optimization could
not easily be applied. This is not only bad from a performance POV,
but also poses as a potential source for heisenbugs: Using the
different API versions of QTimer::singleShot would use different code
paths internally, which then would not ensure the expected slot call
order. This problem actually existed already when mixing the
string-based slot syntax with PMF/functors in the QTimer::singleShot
API.
This patch overcomes this hurdle and fixes all of the above: When we
encounter a 0ms single shot timer, and no QObject context object is
available, we fall back to the main thread, or create a temporary
QObject for any other thread. The updated and extended benchmark
shows that this is still a significant performance improvement
over using a timer:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.48 msecs per iteration (total: 748, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
7.20 msecs per iteration (total: 720, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
6.79 msecs per iteration (total: 679, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
6.92 msecs per iteration (total: 693, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.34 msecs per iteration (total: 735, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.90 msecs per iteration (total: 690, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
7.46 msecs per iteration (total: 747, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
6.70 msecs per iteration (total: 671, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
13.75 msecs per iteration (total: 1,376, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
7.05 msecs per iteration (total: 706, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.70 msecs per iteration (total: 670, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
6.58 msecs per iteration (total: 658, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 20977ms
********* Finished testing of qtimer_vs_qmetaobject *********
Without the change to qtimer.cpp, the results are:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
112.84 msecs per iteration (total: 11,285, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
115.62 msecs per iteration (total: 11,563, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
110.81 msecs per iteration (total: 11,082, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.04 msecs per iteration (total: 704, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 746, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
118.42 msecs per iteration (total: 11,842, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
119.35 msecs per iteration (total: 11,936, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
130.96 msecs per iteration (total: 13,096, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
8.08 msecs per iteration (total: 808, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.79 msecs per iteration (total: 680, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
7.49 msecs per iteration (total: 749, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 153995ms
********* Finished testing of qtimer_vs_qmetaobject *********
Additionally, this patch adds a unit test to verify that the slot call
order for 0ms single shot timers is followed while mixing the various
API versions. It fails without this patch but passes now.
Finally, another test is added to verify that using QTimer::singleShot
before a QCoreApplication was constructed is still working properly.
Change-Id: I0d6211554b6198cb3e527be9ec3adc572b1b54ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Until now, QEasingCurve was not streaming all it's internal state.
Therefore, doing store/reload operation through QDataStream would not
yield the same curve as the original. This patch fixes it.
[ChangeLog][QtCore][QEasingCurve] QEasingCurve now properly streams all
the data needed to QDataStream.
Change-Id: I1619501f5b4237983c8c68e148745a5e58863f55
Fixes: QTBUG-68181
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The current code only tries to load the required functions from
LIBRESOLV_SO (if defined) and resolv, but on FreeBSD they are in libc:
https://www.freebsd.org/cgi/man.cgi?query=res_query&sektion=3&apropos=0&manpath=freebsd
This commit changes the code so that, after failing to load the
non-existent libraries, it attempts to load the functions with dlsym()
using the special handle RTLD_DEFAULT, which searches for the specified
symbol in the loaded libraries.
This is a follow-up to 8eeb5150ed.
Change-Id: I19d90b0ca8703398bf4f5f4edd5ae31e346ef251
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removes handling of missing Q_COMPILER_NULLPTR, Q_COMPILER_AUTODECL,
Q_COMPILER_LAMBDA, Q_COMPILER_VARIADIC_MACROS and
Q_COMPILER_AUTO_FUNCTION.
We haven't supported any compilers without these for a long time.
Change-Id: I3df88206516a25763e2c28b083733780f35a8764
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current code only tries to load the required functions from
LIBRESOLV_SO (if defined) and resolv, but on FreeBSD they are in libc:
https://www.freebsd.org/cgi/man.cgi?query=res_query&sektion=3&apropos=0&manpath=freebsd
This commit changes the code so that, after failing to load the
non-existent libraries, it attempts to load the functions with dlsym()
using the special handle RTLD_DEFAULT, which searches for the specified
symbol in the loaded libraries.
Task-number: QTBUG-74844
Change-Id: If97aaae233cabbfa01c30d26d9a7fb01ec3ff5c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Includes a fixup for 03fadc26e7, which
removed the check on empty transition list, needed when no data are
available. Ensured that such a data-free zone would in fact be
noticed as invalid during init().
Fixed handling of times before the epoch (we still want to consult a
POSIX rule, if that's all that's available) while ensuring we (as
documented) ignore DST for such times.
Fixed handling of large times (milliseconds since epoch outside int
range) when looking up POSIX rules. Gave QTimeZonePrivate a YearRange
enum (to be moved to QTimeZone once this merges up to dev) so as to
eliminate a magic number (and avoid adding another). Moved
year-munging in POSIX rules after the one early return, which doesn't
need the year range.
Added test-cases for the distant past/future (just checking UTC's
offsets; SLES has a minimal version of the UTC data-file that triggers
the bugs fixed here for them).
Fixes: QTBUG-74666
Fixes: QTBUG-74550
Change-Id: Ief7b7e55c62cf11064700934f404b2fc283614e1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Enum class are serialized using the declared size.
[ChangeLog][QtCore][QDataStream] Enumerations can now
be serialized through QDataStream without the need of
manually defining streaming operators.
Change-Id: Iae9a63eb62b5a5615b657766a3c4c66ba4d98d0e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Paolo Dastoli <paolo.dastoli@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows tools that look for matching `foo_entry/exit` pairs in the
trace data to work properly. An unmatched `_entry` would otherwise
confuse them, making them think that the call stack is continuously
increasing.
Change-Id: Idff7f587ea25c46ec86ad623cc82d503db34a194
Reviewed-by: Christoph Sterz <christoph.sterz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Additionally, we also add a Q_TRACE_EXIT which runs a trace point when
the scope is exited, leveraging qScopeGuard behind the scenes.
Q_TRACE_SCOPE uses Q_TRACE_EXIT internally - the difference is that
the _SCOPE version enforces the naming scheme of _entry / _exit for the
tracepoints, whereas Q_TRACE_EXIT can be used generically.
Change-Id: I4a2f5ea09f451fcf664d07fd493b679f7527ac06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
