Now that -l and -fw options are gone, using a combined EXTRA_LIBS
makes no sense anymore and only complicates things.
Change-Id: Ic12bf482f3bed041aff7f0891f008b1f34ae2b4d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's only used in one place, where it's actually not required either.
Change-Id: I5766d2b5f0c1083bbd58a9b9fb07cc67bbd46a94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not a feature that should get propagated to other
configure runs, so simply hardcode support for it.
Change-Id: Ieb1c33243154b3583e91061d3592d7e87c36f402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The regexp were capturing too greedy:
$$replace(c, "^--?(.*)", "\\1") changes --developer-build to
-developer-build. Do not accidentally capture the second dash.
Change-Id: I19586a1678fc3bf3f450ec31f5bd7e71e9514b34
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
qmake tries to use pkg-config when the config.test contains PKG_CONFIG,
which will of course fail without the sysrooted env vars. and unlike in
the old configure, these don't become automatically available by virtue
of the script simply exporting them.
longer-term, the test programs shouldn't mention pkg-config deps
explicitly, as these are redundant with what is specified in the JSON
file. relevant changes are already pending.
Task-number: QTBUG-54403
Change-Id: Ie9d3bbb2e4febffde5fd122d7d0a8b70b8679fcc
Reviewed-by: Liang Qi <liang.qi@qt.io>
don't have extra spaces in the pkg-config calls when no environment
variables are injected.
Change-Id: Ieb14f775b2a04726e8f62114b69d9be7fa662eb0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
using the Makefile target separator to determine the host system is of
course not a terribly good idea. the correct variable to query would be
DIR_SEPARATOR, which always reflects the host. however, a direct os
query is less obscure in this case.
Task-number: QTBUG-54346
Change-Id: I6bc1372a7c9a84a241a97f9f767f046b026411c3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
while the names of the compilers are actually an undocumented internal,
we don't provide an actually working proper way to sequence extra
compiler execution with build-time generated inputs when they are
indirectly listed (as via .qrc files).
Task-number: QTBUG-54299
Change-Id: I269c26512897b72706dc8b769aa47e8157c2a5c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This follows up ab599a3931, which did not
take installation into account.
Task-number: QTBUG-54036
Change-Id: Ic1b3acb8984255dd1ca1c288b7b150814ce9e606
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the tests would inherit MAKEFLAGS, with somewhat predicatble results.
Change-Id: Ia17638f6229d0ae86f5558726850040703d90044
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
libGLES2 (the only user of these libraries) is built dynamically even in
a static qt built when dynamicgl is configured. in this case the static
libraries need not be installed.
amends 2311997.
Change-Id: Ic9bc3937d6ee0d97e0ca7fc96596fa90ebfe8710
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
don't add framework directories (including the respective marker!).
this is consistent with the unix configure code.
Change-Id: I2e187057bc3fe2b35128cd5dc2af57b9f3685d83
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
iphonesimulator_and_iphoneos was renamed to simulator_and_device in 5.7.
Task-number: QTBUG-54163
Change-Id: If4a76f45450edc0f6e8fb3615355613212314300
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If macx is present, osx AND macos should be required.
Change-Id: I5cd9d41270c741dc314720a1119b163dd17fdfd7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
- Adapt to the OS X => macOS rename in Q_OS_ macros/docs, qmake scopes,
file selectors, etc.
- Add new QSysInfo values and MAC_OS_X / __MAC_ / __IPHONE_ values for
macOS 10.12 and iOS 9.1 through 10.0.
- Update prettyProductName with new macOS "Sierra" codename.
Change-Id: Id976530beeafa01b648ebaa16f4a8f0613fcaf75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the assumption stated in b67a0836d is actually invalid - configure sets
build_all without debug_and_release there. debug_and_release does
actually imply build_all, though.
to make things less confusing, don't let configure inject
iphonesimulator_and_iphoneos into all projects, but handle it like
debug_and_release instead.
Change-Id: Ib7acdc63308a538862fc603428f81aba60bca08e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This fixes a long-standing issue for Qt packages, where the
paths detected at configure time do not necessarily match the
paths on the user's machine. Hence they have been stripped
manually from qconfig.pri so far, preventing moc from resolving
some includes.
The same logic in configure is left alone for the time being,
since the paths there are also used to filter paths returned
by pg_config and mysql_config. I expect that this will
eventually be removed too in a bigger refactoring going on
right now in dev.
Asking the compiler for implicit paths only works for non-msvc
builds - that is, gcc, clang and icc fortunately have a
compatible way to retrieve the paths. MSVC works
solely on environment variables, which will be taken into
account by a separate patch.
[ChangeLog][qmake] The implicit compiler directories that
moc needs for resolving include files are now determined
when qmake runs. So far QMAKE_DEFAULT_INCDIR was determined
at configure time, which might be wrong for relocated
installations.
Task-number: QTBUG-52687
Change-Id: If0706e8c56a5aca2b6e777e79e90342c498726f3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Having the debug info in separate files is very helpful, especially on
memory constrained 32bit systems. When the debug info is compiled into
the object files, processes can run out of memory when trying to load
them.
Change-Id: I1808a32e855d6a62e17e1b734c511b31db5f03f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
LIBS_PRIVATE is more correct (these shouldn't be part of the public API),
and additionally, using LIBS_PRIVATE also ensures these libraries come last
on the link command, which fixes builds using -Wl,--as-needed.
Change-Id: I9f2e4e78855a30a53ce9013623597b840a2832bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so far, each module had to do it in its .qmake.conf. by now, all modules
have been adjusted to the expected structure, so we can enable it
centrally.
Change-Id: I16b4e7581e51bfc54e71d2f7f852858ae0b47281
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
don't pretend that these two flags can be set separately - the
configures set them in tandem.
Change-Id: Ib0beae0152de09026d4627fd3ae0feabd9ce1b81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When compiling on Windows to for example Android, we may be using the unix
generator, but the make command may be mingw32-make.
Task-number: QTBUG-53038
Change-Id: If8d1e1bea733cf1b4ed837c423a34ecfb3cafd1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We don't know why it works, but we've been told that it fixes
some builds and we have no reason to think it will break others.
Task-number: QTBUG-52998
Change-Id: Iacaa1fb3c49e4d7aafd4167e591ff3724489872e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
