On macOS the selected text was empty when run together with other tests. Change
QApplication::setActiveWindow() to QWidget::activateWindow() to get keyboard
focus as well. After that the expected temporary file name is selected.
Change-Id: I3b0c2bfca8008cb89b7e666a362beb15a851d8e0
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test was failing because the files it expected to create were not actually
visible on the disk.
This was because 189e9c93d7 made QTemporaryFile
use unnamed files if the file name is not actually requested. Fix by forcing the
temporary file to be made with the requested name.
CI has not caught this because the test executable is marked insignificant_test
on Linux.
Change-Id: Ibe0244fdfcc66acf3be4314da51b4c0b3b520b71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
selectFile() is a no-op if the dialog is visible and
its line edit has focus, which will happen at some
point after show() is called.
In other words this is a race, and the test will pass/fail
depending on the timing of the platform implementation.
Task-number: QTBUG-66536
Change-Id: I03957edb6496d17af7a8ed1d4ca86435375e0d40
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don’t assume that there is an active modal widget
on QApplication::focusChanged(). That signal can also
be emitted on focus clear during dialog destruction.
Task-number: QTBUG-66536
Change-Id: I20c64339c56a52b39c26a7683b62779deba576d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
File system operations like renaming/removing may fail on Windows when
file system watchers are present. Add functions to
QFileSystemModelPrivate to temporarily remove the watchers prior to such
operations and to restore them in case of failure. Use them for
rename/remove (within a feature check for QFileSystemWatcher
and Q_OS_WIN).
Task-number: QTBUG-65683
Change-Id: I90142901892fbf9b1e1206a3397a95ffd3c8f010
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Introduce a special hash modeled on the one used for QFileSystemWatcher
on Windows.
Task-number: QTBUG-31103
Task-number: QTBUG-64147
Change-Id: I69ebabe841716e4957ae3fb04fa5c43d233a3552
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The tests start to show flakyness on Linux in 5.10 (rowCount() check
failing). This seems to point to a race condition between the files
showing up and the file system watchers of QFileSystemModel starting.
To fix this, close the file and wait until it shows up in the directory
before pointing the QFileSystemModel to it. The tests then no longer
rely on the file system watchers.
Change-Id: I39cffb4cacf6843e8e4180efb405345307c78dd8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently on Windows, the Next button's shortcut doesn't work, because
QWizard overrides it with an empty key sequence.
The key sequence should be changed only if isVistaThemeEnabled() returns
true.
Task-number: QTBUG-46894
Change-Id: I54f26388b167973cc8065a867d9e771c1e6a2a72
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Unique begins with a "y" sound, hence a unique is correct.
Change-Id: I9eb6b4d4c9ddab45af931e97c041c24edf163eca
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Has become flaky on CI. Does not fail locally.
Change-Id: I42938849571938db78b16a72c215442a69f7c2d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
setDoubleStep works in the same manner as for setIntStep in that it is
just available for input dialogs getting a double.
[ChangeLog][QtWidgets][QInputDialog] Added setDoubleStep to enable
changing of the step amount for getDouble().
Task-number: QTBUG-17547
Change-Id: I5cabcfceb23324f8045f2b1e49017644418db01a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
show will use the platform's default flags but the test actually checks
for the flags that were set before so we have to use setVisible(true)
instead.
Change-Id: I52c055ec07d6f0dee626626318c875aefdf67484
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In the referenced bug report, dismissing a QFileDialog while the
Qt Virtual Keyboard was in use would result in a crash.
Dismissing a file dialog created with
e.g. QFileDialog::getOpenFileName() causes it to eventually be
destroyed. When this happens, it starts deleting its children. Each
child widget's destructor calls clearFocus(). In clearFocus(), there is
a block of code that emits QWindow::focusChanged(), passing the result
of focusObject() called on that widget's window.
QWidgetWindow::focusObject() could end up using itself as a fallback
focus object if it had no other focus objects (e.g. children) to use
instead, even though it was in the process of being destroyed; as were
all of its children. The Qt Virtual Keyboard plugin would then try to
use the focus object, even though it was in an invalid state.
To fix this problem, we return early from QWidgetWindow::focusObject()
if the window is in the process of being destroyed.
Task-number: QTBUG-57193
Change-Id: I137cf9415812ce2e0419c0afe8076ce150f248cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jarkko Koivikko <jarkko.koivikko@code-q.fi>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes the test a lot faster and perhaps more reliable.
Change-Id: I055cfde627c75f71735eabbf01af2a196bd8b00a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Change the check for the unambiguous match to be case insensitive.
Task-number: QTBUG-60466
Change-Id: Iaa019cc803a56b015f45309fb1b3a7a8a3d82ee4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As explained in
https://blogs.kde.org/2009/03/26/how-crash-almost-every-qtkde-application-and-how-fix-it-0
creating dialogs on the stack is a bad idea if the
application or the dialog's parent window can be closed
by means other than user interaction (such as a timer or
an IPC call). Since we cannot know whether Qt is used to
build such an application, we must assume it is, create
the dialog on the heap, and monitor its lifetime with a
QPointer.
Instead of using manual resource management, add a
minimal implementation of QAutoPointer, and use that in
all static get*() functions.
Task-number: QTBUG-54693
Change-Id: I6157dca18608e02be1ea2c2defbc31641defc9d1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch improves the handling of mime type filters in QFileDialog.
The main change is in selectMimeTypeFilter(), which was just falling back
unconditionally on selectNameFilter(). Instead, mime type filters should
have an higher priority than name filters.
This patch also adds a new selectedMimeTypeFilter() method, which is used in the unit test.
Change-Id: Ice8bb08f5ff46e4a942d539f6001424eca878f74
Reviewed-by: David Faure <david.faure@kdab.com>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
