It seems glibc's extrapolation of existing DST-rules cuts off at some
point in the distant future, where the IANA DB gives no end-time for
such rules, leading QTimeZone to keep applying them. This lead to
tst_QDateTime::fromSecsSinceEpoch() not getting an invalid date in one
of its bounds-probing tests, due to a within-bounds datetime getting
glibc's offset and then the out-of-bounds one falling back to the IANA
rule's offset that put it back within the bounds.
This directly affected Australasian zones (which glibc locks into
daylight-saving time in this distant future) which were fixed by using
the IANA DB's offset; but the relevant date is in August so other
zones, north of the equator, that glibc locks into standard time, then
had the reverse problem, so we have to take the minimum of the two
sources' offsets to get all zones on board.
Change-Id: I0c94af2ba108dea31bee46aafa4a8cca8d373a5c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Amend 3c6e9dcc623c9d7281a81174bb3a696e030f30a7 by making sure that
we explicitly move move-only functors into the slot object in the
respective tests, and that failing to do so doesn't compile.
Also add test coverage for mutable lambdas, which work as they do
with connected functors: the connection stores a copy, and calls
don't modify the original functor.
Change-Id: I637e6f407133e2f8f72109b3fe5369a11d19da93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This reverts commit 9958edba41, which
incorrectly tested a move-only functor without actually moving the
functor.
Change-Id: I3707f9f8e5055102f7edfb3e1cb9750978356dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Add missing includes
- Use std::all_of, that also fixes a narrowing conversion warning
(qsizetype).
Change-Id: I0f7f4b91bda4c187b8f8094e3039079c43fbf478
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] Introduced Q_NODISCARD_CTOR which resolves to
[[nodiscard]] attribute for constructors on compilers that support
it, and does nothing on other compilers.
Using [[nodiscard]] attribute on a constructor is a C++20 feature,
however in practice it is supported on most of the compilers that
we use in Qt 6. Clang generates a [-Wunused-value] warning, GCC
and MinGW generate a [-Wunused-result] warnings, and MSVC
generates a C4834 warning.
However, there are some exceptions.
The Integrity compiler provides the following warning:
"tst_qglobal.cpp", line 699: warning #3435-D:
the "nodiscard" attribute doesn't apply to constructors,
destructors, or routines with void return type
[[nodiscard]] explicit Test(int val) : m_val(val) {}
The QNX compiler (QCC 8.3.0) and GCC 9.3.1 on OpenSUSE generate
the [-Wattributes] warning:
tst_qglobal.cpp: In member function
'void tst_QGlobal::nodiscardConstructor()':
tst_qglobal.cpp:699:44: warning: 'nodiscard' attribute applied to
'tst_QGlobal::nodiscardConstructor()::Test::Test(int)' with void
return type [-Wattributes]
[[nodiscard]] explicit Test(int val) : m_val(val) {}
These warnings will lead to build failures when compiled with
-warnings-are-errors flag, so for these compilers the macro
does not do anything.
An attempt to use __attribute__((__warn_unused_result__)) was
also unsuccessful on these compilers, so this patch goes for
an easy solution, and simply checks
__has_cpp_attribute(nodiscard) >= 201907L
to decide if the attribute is supported or not.
This commit also introduces a syntax-only test, and also applies
the new macro to QMutexLocker, because not all platforms in the
CI build and run unit tests.
Fixes: QTBUG-104161
Change-Id: Ib4230661a5ad5e8af0d67b21b034486ebcd67562
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QWeakPointer can do the same, so there's no reason to not allow it for
QPointer.
[ChangeLog][QtCore][QPointer] QPointer<T> can now be (move- and
copy-)constructed from QPointer<X>.
Fixes: QTBUG-112464
Change-Id: I77cf5d39974bf2b3ec849b4afc33e286e864821e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Now the tst_qstring is compiled three times:
- with QT_NO_CAST_FROM_ASCII defined
- with QT_RESTRICTED_CAST_FROM_ASCII defined
- with neither of the above defined
so as to cover more code paths.
Pick-to: 6.5
Task-number: QTBUG-109228
Change-Id: I65eca0f6f6aea66fed6eeda1eb77a50a97210807
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows up on commit b906796af6.
Fix an off-by-one error - I was testing the last days of December 1799
and June 1800.
Change-Id: I79ab622978d35f91e3e1b1b8d00d93b0d4b31c07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use static constexpr int values instead of abusing enum.
[ChangeLog][QtCore][QTimeZone] The MinUtcOffsetSecs and
MaxUtcOffsetSecs constants are now static constexpr members of
QTimeZone, rather than members of an anonymous enum. Their values are
now 16 hours either side of zero, to allow for some historical zones.
Change-Id: I1c3a0f85a2b83b5010f021ca0f5ca5baefbf32e4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
In Qt >= 6.1, < 6.5, a trivially constructible type would have the
NeedsDestruction flag set, but it's dtor pointer would have been null.
In Qt 6.5, the meaning of the NeedsDestruction flag was changed to be
more aligned with what the name suggests, and thus would only be set for
non-trivially destructible types. For QMetaType this was fine, but
QVariant has a check for acceptable metatypes which attempts to verify
whether a QMetaType is usable for QVariant. The check assumes the
semantics of Qt 6.5, and thus fails for metatypes created by older Qt
versions.
To fix this issue, we increment the QMetaType revision field, and only
check the metatype's destruction support if the revision is high enough.
In theory, that allows passing unsuitable metatypes from older Qt
versions to QVariant; however, such code would have been broken in prior
Qt releases already (which didn't attempt the check), and no code that
used to work in any released Qt version will break (as we simply skip a
check that was passing before).
Fixes: QTBUG-113227
Pick-to: 6.5
Change-Id: I12e02bd97d2c410ea1a36efb0ce2389f21d50a30
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Amends 207aae5560 to make it easy to
create human-friendly error messages. Since the functor-accepting member
functions are not removed from the API, the first compile error will be
that there is no suitable overload of the makeSlotObject helper, which.
With the assert helper, the first error message is easier to understand.
Change-Id: I4878ec35a44ddfa5dc9d9e358d81c3fd40389c0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move-only functors must never be passed by value, so fix the
QFunctorSlotObject constructor accordingly.
This then requires adjustments to the various QMetaMethod::invokeMethod
overloads, as those must also perfectly forwad the functor type.
Enable the previously failing test case for move-only functors.
Change-Id: I9c544fd3ddbc5e1da3ca193236291a9f83d86211
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amend 207aae5560, as code checker
complained that we std::move'd a potential lvalue. This warning was
valid if the public API did not accept the functor parameter by value.
Fix this by consistently std::forward'ing the parameters through the
call stack, and add a compile-time test. Writing that test revealed that
the helper API didn't work with free functions, so fix that as well. It
also revealed that QFunctorSlotObject couldn't work with a const
functor, which is also fixed by this change.
We cannot support move-only functors with that change, as it requires
a change to QFunctorSlotObject that breaks the QMetaObject test.
Change-Id: Iafd747baf4cb0213ecedb391ed46b4595388182b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids constructing an object just to copy (later: move) it into a
QVariant.
ChangeLog will be in a follow-up change adding emplace support.
Task-number: QTBUG-112187
Change-Id: I444e580c7d8927d41b3d21d5a521e7c475119e4c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Functions in Qt that take a callback need to support callables with or
without context objects, and member functions of an object. The
implementation of those overloads follows a pattern that ultimately
results in a QSlotObjectBase implementation being created and
passed to an implementation helper that takes care of the logic.
Factor that common pattern into a new helper template in QtPrivate
that returns a suitable QSlotObjectBase after checking that the
functor is compatible with the specified argument types.
Use that new helper template in the implementation of
QCoreApplication::requestPermission and QHostInfo::lookupHost.
The only disadvantage of centralizing this logic is that we cannot print
a more detailed error message indicating which argument types the
caller expects. However, that information is visible from the detailed
compiler errors anyway.
Change-Id: I24cf0b2442217857b96ffc4d2d6c997c4fae34e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These classes depend only on Core, not Gui.
This allows dropping the dependency of tst_qxmlstream and tst_qzip on
QtGui, and prevents a tst_qxmlstream FTBFS when building with
QT_NO_TEXTODFWRITER.
Symbols move from QtGui to QtCore, but the classes are private API, so
not under BC constraints.
The classes are not used outside qtbase, so no other in-tree users
need porting.
Task-number: QTBUG-3897
Change-Id: Ifa148f43ec139d7f9ac1f3893e2fcf4640e3c60c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The expected states are:
- nothing sets theMainThread before main()
- theMainThread is reset when the last QObject (the QCoreApplication in
the test) is destroyed
The GUI version of this test appears to leak a lot of QObjects. By the
time this function runs, theMainThread's QThreadData still has a
refcount of 66 on Linux/XCB. The Windows non-GUI version also
failed. Neither situation was investigated to see why objects are
getting leaked.
Pick-to: 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd17507d9e6ef08743
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QtXml is only DOM and SAX, not QXmlStreamReader/Writer (those are in
QtCore).
Pick-to: 6.5 6.2
Change-Id: I8454d7db90303d347d5b4be94c9f21401d1e273f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
In commit 482a75fef9 the code was changed to return early, but that
missed appending the organization and app names while test mode is
enabled.
Issue spotted by Edward.
Pick-to: 6.5
Change-Id: Ifd220f8990874a173413dcf71d105c04b605c800
Reviewed-by: David Faure <david.faure@kdab.com>
Some unittests set a custom Organization and Application names and then
clears them. Instead used init() method to "reset" those two names to
the original values before each unittest is run.
Pick-to: 6.5
Change-Id: I359f3911dd50a2aecfd8dde22e2d591adc6e224e
Reviewed-by: David Faure <david.faure@kdab.com>
Amend 4d90c4e74a by clarifying why
moving the QSingleShotObject to the receiver's thread is a good
idea. Move that logic into a separate function and use that also
for the string-based connection.
Optimize the implementation by delaying the timer creation until
after we have moved the QSingleShotTimer object to the target
thread, using a queued metacall if needed to create the timer.
This avoids the creation of the timer in the wrong thread and
then the recreation of the timer in the new thread when QObject
handles QEvent::ThreadChange.
To avoid that the timer is created when it has already expired in
real time, use a deadline timer and fire timeout immediately when
it has expired by the time we get the metacall.
Since the timerId might now not be initialized in the constructor,
initialize it to -1.
Augment the crossThreadSingleShotToFunctor test function by
deliberately not starting the thread until the deadline expired.
[ChangeLog][Core][QTimer] Single-shot timers with a string-based
connection are now started in the receiver's thread, not in the
thread that creates the timer.
Task-number: QTBUG-112162
Change-Id: I3fc94c34c21d9f644da41a2e4c2da479980b8580
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MET is an alias for CET, so the test's attempts to detect whether it's
in CET can't distinguish them other than by checking the abbreviation.
Change-Id: Ibb467d9bb2d983ca16302111b54f664a614057c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It turns out that Alaska and The Philippines had historical offsets
exceeding 15 hours, prior to day-transitions to bring their dates in
sync with their respective sides of the international date line.
Change-Id: I48fdf3aa6d8c0bacb368d08316733a10ee11a281
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removing a few unused variables in auto tests that were triggering
`-Wunused-but-set-variable`.
Pick-to: 6.5
Change-Id: I74bd0d7335d8bddeb18687b18c8a8be965f9fa20
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This removes all uses of QDeadlineTimer::t2 member in the .cpp (so it
gets marked [[maybe_unused]]) and greatly simplifies the code.
Change-Id: Ieec322d73c1e40ad95c8fffd17465bd50c1113ea
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
You can't partially specialize a template function, so these
specializations for steady_clock only worked if the Duration parameter
was nanoseconds. This could have been solved with function overloads
instead, but I find the if constexpr code simpler to read.
Pick-to: 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17468bd73fc2fe24
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This matches the work that was done for QElapsedTimer. The
QDeadlineTimer::t2 member is now always 0.
This also removes the last distinction of timer types. Originally I had
intended to use CLOCK_MONOTONIC_COARSE on Linux[1], but that created
more problems than was worth, so I abandoned the idea in 2016.
[1] https://codereview.qt-project.org/c/qt/qtbase/+/159933
Change-Id: Ieec322d73c1e40ad95c8fffd17468b313798ef79
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
This commit deletes the direct, low-level functionality that
QElapsedTimer has carried since it was introduced. Everything now uses
only std::chrono::steady_clock and std::chrono::nanoseconds.
QDeadlineTimer temporarily still uses qt_gettime(), which is moved to
qcore_unix.cpp.
Task-number: QTBUG-110059
Change-Id: Ieec322d73c1e40ad95c8fffd174641a469b1eee5
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid capturing the same property multiple times in a binding by
storing them in the BindingEvaluationState. We store them in a
QVarLengthArray array, as the number of properties involved in a binding
is expected to be rather low, so a linear scan is fine.
Avoiding double capture is a good idea in general, as we would otherwise
needlessly reevaluate bindings multiple times, and also needlessly
allocate memory for further observers, instead of using a binding's
inline observer array.
Even more importantantly, our notification code makes assumptions that
notify will visit bindings only exactly once. Not upholding that
invariant leads to memory corruption and subsequent crashes, as
observers allocated by the binding would get freed, even though we would
still access them later.
Fixes: QTBUG-112822
Pick-to: 6.5 6.2
Change-Id: Icdc1f43fe554df6fa69e881872b2c429d5fa0bbc
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Fixes compiler warnings about narrowing conversions.
Found by compiling with clang and -Wshorten-64-to-32.
Drive-by changes:
- use range-for instead of an iterator based loop
- use strlen("*.") instead of magic number 2
Pick-to: 6.5
Task-number: QTBUG-102461
Change-Id: I0bf2299049c0411ed496468238ca30b69946ffc2
Reviewed-by: David Faure <david.faure@kdab.com>
The classification of local time as ahead of UTC, behind it or equal
to it gets complicated by zones near the prime meridian - some of
which have varied which side of it they nominally are - or the
international date line, which a few zones have crossed.
So, instead of having one classifying variable, split to having three,
one for the distant past (when using local solar mean time), one for
the epoch and one for the distant future.
Change-Id: I7c0da376e1625372086dc51afa815756f0bde442
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zone had a transition at the start of 1900, so QDTP's default date
ends up being 1900-01-01 at 00:02:20 instead of at 00:00:00; and any
parsing of date-time strings that doesn't set the minutes and seconds
consequently ends up "wrong" (about a field that wasn't specified).
Change-Id: If4b9864616fa08bc023a6974dae255f96ca90f83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zone had a transition at the start of 1900, used as default date
by the parser. This leads to the default minutes and seconds being 2
and 20, rather than 0. Since this test is parsing a date-only string,
only check the date of the result, to avoid failing in Cocos.
Pick-to: 6.5
Change-Id: Ifb307eadb747097988bcf0afc6f307835ff2c8ec
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
America/Sao_Paulo was not alone in starting 2008-10-19 with a spring
forward. Include the other affected zones in the check to tune the
expected start-of-day time. See [0] for details.
[0] https://github.com/eggert/tz/blob/main/southamerica
Pick-to: 6.5
Change-Id: If251d8b715090319441790696983273637765d2e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some QDateTime tests get tripped up by a transition at the epoch in
Baja Mexico. For the operator_eq() and time-difference test, simply
using startOfDay() instead of QTime(0, 0) - which was skipped - solves
the problem. For addDays() and fromStringDateFormat(), skip the
affected tests.
Change-Id: I3620f0d1e4b05d9f799662eea96a40c8284de331
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The zones in Baja Mexico had a transition at the epoch.
Change-Id: Ic70e23bcc980bf371e925fcb8fb83ca5ef000c9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We check three sample dates, in different years, so don't compare
their year() to 1970, but to their respective actual years. In the
process, package the arrays iterated for these checks into a constexpr
struct array and reverse them so that, instead of reverse-iterating
and indexing, we can use a ranged-for loop.
Change-Id: I214685346c637875a4ea31125c324851eb4308db
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name final is suboptimal, given that it's also a keyword.
Rename initial at the same time.
The local-time parts of the test are apt to fail if local time
coincides with the zone being tested, as previously noted. Document
known cases of such coincidences, to help someone studying a failure
to know why it happened.
Change-Id: I1f1f302f161373a154066df210e03725b9a5f9ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the test failed, it did so in triplicate.
Pick-to: 6.5
Change-Id: Ia871aed0a5960120a2659a6778c10dccd4b2953a
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's unlikely we will ever use pro2cmake at this project stage,
so it doesn't make any sense to keep the 'special case' markers
in the CMake scripts. Remove them and replace with TODO where
needed.
Change-Id: I84290c20679dabbfdec3c5937ce0428fecb3e5a7
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We sometimes use Objective-C++ code in files with a .cpp extension,
to avoid the churn of adding a foo_mac.mm file. Instead of manually
telling the compiler to build these files in Objective-C++ mode, we
use CMake's intended mechanism, which means genex constructs such as
$<$<COMPILE_LANGUAGE:OBJCXX> will work for these files as well.
Pick-to: 6.5 6.2
Change-Id: If295c3f34f6bee9f4d9f877f519c9c7770665fee
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
