For single config mode (no debug_and_release) extra compilers wouldn't
get added to the vcxproj file.
Single config mode creates a temporary project, and that was incomplete.
Multi config mode, on the other hand, directly operates on the "real
data" and wasn't affected by this problem.
Task-number: QTBUG-69769
Change-Id: I9cd942e43d80adbeac9a3c8fbe1a5766bc9645a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A switch statement using enumeration type midlErrorCheckOption as
condition had an enumeration value from type midlStructMemberAlignOption
as a case label. This had only coincidentally the intended effect, since
the intended value (midlErrorCheckOption::midlEnableCustom) and the
actually used one
(midlStructMemberAlignOption::midlStructMemberAlignOption) have both
the value 0.
Change-Id: I73b337f23e733a1a6fb80517e29365e01838238a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Generated C++ source files with extensions other than .cpp would not get
compiled, because the code ignored all other C++ source extensions like
.cc and .cxx.
Fix this by respecting the value of QMAKE_EXT_CPP and QMAKE_EXT_C.
Task-number: QTBUG-69770
Change-Id: I097dfef6920e353a351c97891cdbfdc9a859815f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We now treat -o foo/bar/baz as a request to generate the output in the
foo/bar directory with baz as the output name, or if foo/bar/baz is already
a directory, in the foo/bar/baz directory with the default output name.
We take care to handle generator specific directory structures, so
that the project directory does not get merged into OUT_PWD. This is
done in runQmake(), before parsing the project file, so that OUT_PWD
will be correct during project parsing. The individual generators are
then passed the filename relative to the final output directory.
Each generator now also makes sure to add the right project suffix
to the output file, so -o foo will result in foo.pro or foo.vcproj,
instead of just foo.
Task-number: QTBUG-44408
Change-Id: I26990cec0c0458bee2b88dbb86322617a85f54b5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the variables are quoted correctly for commands, which is incompatible
with quoting for dependencies under mingw. so insert the paths as
literals, where we can control quoting.
this fixes building in directories with spaces, which i broke in
7c34e0a7b by using different quoting styles for deps and commands in the
first place.
this breaks the hypothetical use case where somebody wants to override
TARGET or DESTDIR (or DESTDIR_TARGET under windows) on the *make*
command line. not sure why anyone would do that - just do it at the
*qmake* level.
we did not get rid of OBJECTS, because that would cause significant
duplication in the makefile (not that it would matter too much, given
the dependency lists ...). this isn't a problem, because these are
short relative paths which are not expected to contain "funny"
characters.
an alternative would have been to change the variables' quoting and
eliminate them from the commands instead, but that would be
backwards-incompatible, because commands are "user-servicable".
for the same reason, we cannot get rid of the variables entirely.
Change-Id: Ic7592c7fc67d8b7d2b64de80808365cd1c3f79d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
under windows, libraries can have a numeric suffix derived from VERSION,
and (under MinGW) a unix-like "lib" prefix - neither of which .prl files
have. therefore, we had to make the back-mapping from the library to the
.prl file reverse-engineer the original TARGET's name. we verify whether
we actually got the right file by comparing the target specified inside
the .prl file with what we started from.
this fixes linking of transitive deps of static deps.
the alternative of changing the .prl naming pattern to avoid the
back-mapping was discarded, as a) it would be backwards incompatible and
b) it would break project-internal -lfoo references to versioned libs.
Change-Id: Ia9b899fe6a5700fee528bd1dacf130caf083cdd6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
add a parameter that indicates whether the passed filename can be only
the basename of a prl file. if so, we can skip the other attempts at
interpreting the file name. that's not only faster, but also clearer.
Change-Id: I6f6da3f4485216021282a08acaefb53e60e7242a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
these characters can appear in file names, but are meta characters in
dependency context. they have different semantics in make commands, so
this required some reshuffling in the windows generator (which just
treated dependencies and commands the same way).
we don't actually escape colons for nmake, because it has magic
treatment of drive letters anyway (and colons cannot appear elsewhere).
also, if a target's filename gets quoted, batch rules will blow up.
therefore, "funny" file names are really only supported as inputs -
which is just enough to make resource embedding work.
Task-number: QTBUG-22863
Task-number: QTBUG-68635
Change-Id: I473b0bf47d045298fd2ae481a29de603a3c1be30
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QMAKE_MANIFEST variable was ignored for VS linkers that support
the /MANIFEST:embed option.
Task-number: QTBUG-59967
Change-Id: I1cdb60ec3a7a5f117942952d4632378ff142daa5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes qmake-generated project files for Visual Studio 2017 for
setups where the Windows 8.1 SDK is not installed.
Task-number: QTBUG-66265
Change-Id: I67712019f7142e40262f171eb23f9f1e6ab3a251
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Removed the '!' from two comments because the functions being
documented are static functions declared and defined in the
.cpp file. They are not public.
Change-Id: Ie3b2c32c64102634b6b2a4c438da191536a426d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
MSVC requires that the C PCH file is compiled (as an object) and linked if
any C file is found, and the same for C++.
Most qmake projects are C++.
If a C++ project has a precompiled header, it is typically of C++ type, and
cannot be compiled as C (for example, it contains or includes classes).
Since there is no easy way to conditionally build the C PCH file only if C
files are found in the project (as done for g++), we need a setting that is
disabled by default.
This amends 30331afda1.
[ChangeLog][Tools][qmake] Introduced precompile_header_c CONFIG option for
MSVC to enable precompiled header for C sources.
Task-number: QTBUG-65103
Change-Id: Id9688a35ee7d9b5e4f5a846b81986cb674bc5f4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This was missed in 8bebded9.
Task-number: QTBUG-63637
Change-Id: I6be472430a9aa8f533def4fd6c14c8dbfe8b6f70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use the writeDefaultVariables method also for the
Win32MakeFileGenerator. Remove the initializations that are already done
in Makefile::writeDefaultVariables.
Change-Id: I590cc5d7031de67dd830e6113849ab080dbf2325
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As the non prefixed variants are deprecated
Change-Id: I2ba09d71b9cea5203b54297a3f2332e6d44fedcf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QRegExp includes can be found in several files where there's not even a
use of the class. This patch aims to avoid needless includes as well as
follow the "include only what you use" moto.
This patch removes a QRegExp include from the QStringList header which
means that there is likely going to be code breaking since QStringList
is used in many places and would get QRegExp in.
[ChangeLog][Potentially Source-Incompatible Changes] qstringlist.h no
longer includes qregexp.h.
Change-Id: I32847532f16e419d4cb735ddc11a26551127e923
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
It was already done correctly in the GCC generators, but lacked in MSVC.
Task-number: QTBUG-11117
Change-Id: I5e6c2e4802dbe33c0f15c46a227a08c3f0cc5707
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The $${TARGET}_manifest.bak file was not removed on "nmake clean".
Task-number: QTBUG-59827
Change-Id: Ia5b636f4917f3e7a2df8d753824b72e63d278005
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If these rules are not added to the solution, Visual Studio will
complain, that the project has to be deployed before it can be run.
Change-Id: I6d3fbc949c85b11a92f78e13e2f6a1b92a5cfdc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If several Makefiles are used in the same directory (for example, for
multiple projects in the same directory or different build configurations),
they all reference the same object_script, which is obviously wrong.
Change-Id: I9b499ceb6b6bd6058f54b452fa44bfb2313eec26
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This was already done on unix, but not for MinGW.
If the archive already exists, it is appended rather than replaced.
This can cause invalid references when whole-archive linking is used
and some object file that was already linked was deleted.
Change-Id: Ie265371f197d996d57002b248043736544ee641e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
adding shared install paths to QMAKE_{INCDIR,LIBDIR} in the spec has the
tiny side effect that they are searched _first_, which is generally a
really bad idea - they should be _last_.
for that purpose, make QMAKE_{INCDIR,LIBDIR}_POST live up to their names
(i.e., search them actually last) and migrate all affected specs to use
them.
Task-number: QTBUG-40825
Change-Id: Ie0de81c3cc49e193186d2fedd7d6c77590c8ef79
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Every /Zc:XXX option qmake doesn't know about yields a "WARNING: Could
not parse Compiler option '-Zc:XXX'; added to AdditionalOptions."
Put all /Zc:XXX options we don't handle into AdditionalOptions without
printing a warning. There's no point in making all options known to
qmake and updating them for every MSVC release.
Change-Id: I319e027791a7b0a29d139ee3074ab1aed8ce8a63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As the directory installation command also works with files as a source
we can unify the external commands, resulting in simpler command lines.
Change-Id: I65013626eedbdb3ce1c77ed230d46edd1603b986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The same as for other visual studio versions use "x86" as arch instead
of win32. arch is used to determine library paths and these use x86 and
not win32.
As compilerArch is not used in MSVC 2017 it can be removed.
Task-number: QTBUG-60530
Change-Id: I47157eb1d7ae9d913461210d34858ffb37c81586
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Similar to the two parent commits, this patchs preserves the time stamps
of files we install as a result of recursive directory copying.
Change-Id: Id5931a467196d5cd67acfa0deffc2488af8a3669
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As for the formatting code, de-duplicate the parsing code by only
parsing char*s, converting QChars to Latin-1 first in a small buffer.
The QUuid(const char*) ctor performed no length checking, relying
instead on the checks performed within _q_uuidFromHex(), which
includes an implicit check for premature end (because NUL is not
a valid token for the parser).
The (QString) and (QByteArray) ctors did perform length checking.
To the extent possible, this is removed, since it is handled by
_q_uuidFromHex(). Failure cases need not be optimized. Only the
QLatin1String overload needs to do some checking, because views in
general are not NUL-terminated. The QStringView overload can just
append a NUL when it converts to Latin-1.
The only check I added to _q_uuidFromHex() is that for src ==
nullptr. It would otherwise be duplicated in several callers.
While touching the internal functions, port to passing and returning
by value.
Saves 1.6KiB in text size on optimized GCC 6.1 Linux AMD64 builds,
even though we added new API.
Port some users to the new functions. Expand fromString() test.
[ChangeLog][QtCore][QUuid] Added fromString(QStringView/QLatin1String).
Change-Id: I519339419129550c86e0ea80514865cd6a768f5d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Similar to the parent commit, this patch adds a unified code path in
qmake itself for installing program files while preserving their
original last modification timestamp.
Change-Id: I7b7dcfa6228c2bfd48ea6036549398bb6f90032f
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Due to that uninitialized variable /DEBUG:FASTLINK ended up in vcxproj
files for VS < 2015. However, that option is supported by VS >= 2015
only.
Task-number: QTBUG-59630
Change-Id: I34d9eef1a3bf2262bac48962938afe84eb7de934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adding the /utf8 compiler flag resulted in undefining all preprocessor
symbols for VS project files, because the ingenious compiler option
parsing logic checked for a 'u' prefix, and "utf8" obviously matched.
The /utf8 flag is added to the additional options, because there doesn't
seem to be an XML tag for that.
Task-number: QTBUG-59431
Change-Id: I762fcdcf6caf0606b40633861e265df5edb4a9c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Call sites of NmakeMakefileGenerator::writeResponseFileFiles expect that
the output is terminated with '\n'. Do not bail out if files is empty.
Task-number: QTBUG-59305
Change-Id: Id3fef8dbc506dad1868e6b352119f5f27b50a368
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Linking with too many object files could lead to "LNK1170: line in
command file contains 131071 or more characters". Do not write all .obj
files into one line but respect a limit of 1000 characters. If the limit
is reached the object files are separated by newlines instead of spaces.
Task-number: QTBUG-58710
Change-Id: Ibae1f737d6b614a9624b4e00cdd21d3722d341e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
in particular, -before (just for symmetry, as it's the default), -early
(the actual objective), and -late (for symmetry again).
Change-Id: I274303582a348b052c3e5106ff360ab4fd7d4ee2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When generating the Visual Studio project XML, the filter "Root Files"
was not being output. Specifically, this means that even if RC_FILE was
specified, it would not be included properly as a resource compilation
target in the resultant Visual Studio project file.
This is essentially a rather belated cherry-pick of qt/d6de960b7f.
Task-number: QTBUG-57914
Change-Id: I7d03dc818df0cf36608012f1a71a3a476d8a9ff7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
now that configureapp does not use it any more, qmake is the only
remaining user. and the license headers already claimed that this code
is part of qmake ...
Change-Id: I9b8a16f8f2b432d2b1143efbdd1f0042305ccc0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before VS 2013 ToolsVersion contained a .NET version
number (e.g. "4.0"). Since VS 2013 ToolsVersion is the same as the
Visual Studio version number (e.g. "12.0"), which is also the default.
We always wrote "4.0" (except in one special case which used
"14.0"). This doesn't bother Visual Studio itself, but other tools
like PVS-Studio.
Remove the ToolsVersion attribute from generated VS projects for VS
2013 and newer.
Task-number: QTBUG-57694
Change-Id: I7a3bc4534c492e9540f6b968bee8a969980df63f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change dcd2f829 introduced fake files with the extension .cbt for custom
build tools that generate code from C++ source inputs. The moc_predefs.h
header file falls into this category, because it is generated from
dummy.cpp.
It turns out that these fake files have to exist. Otherwise the
custom build step is executed on every build. That means re-moccing all
mocables on every build.
Fix this by actually creating the fake .cbt files with some
explanatory comment in them.
Task-number: QTBUG-57695
Change-Id: I251294334425d9914677787d8ba6da1169b4cca5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This tag was never spelled "PlatformToolSet". The correct spelling
is "PlatformToolset" (lower case s). VS itself can load qmake-generated
projects despite this misspelling, but tools like PVS-Studio are
bothered by it.
Task-number: QTBUG-57435
Task-number: QTBUG-57694
Change-Id: Ib70e8561f1827e195194bcf518445b2909a8d8c0
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
eliminating everying TARGET-related was a nice try, but in the real
world (e.g., qttranslations), extra compilers are activated by
PRE_TARGETDEPS, which of course doesn't work when TARGET is entirely
gone.
so instead, let it act as a phony target. this is consistent with the
unix generator.
supersedes 0810d48bc in amending af2847260.
Task-number: QTBUG-57423
Change-Id: I3d2ecc4ff42b37ffe5f71f5c20d17c06b31f4da2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
For QMAKE_EXTRA_COMPILERS with inputs that are "buildable" (e.g. C++
sources) the custom build step is added to the output file. From Visual
Studio's point of view this looks like a circular dependency (e.g.
foo.moc generates foo.moc). Usually this just prints a warning that can
be ignored. But this circular dependency also breaks dependencies
between custom build steps. This became noticeable when the generation of
moc_predefs.h was added. Generating moc_predefs.h must be done before
any moc custom build step is executed.
This patch fixes the issue by using fake files (output file plus suffix
".cbt" for "custom build tool") that act as dummy inputs for the custom
build tools.
Task-number: QTBUG-16904
Task-number: QTBUG-57196
Change-Id: I4711e44a0551046d215db151fa0312af8a9177a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
it's wrong to use the escape function for makefiles, as the command
goes directly to a popen() call.
Task-number: QTBUG-57343
Change-Id: I34a8e4d8fb406303c593e7c1e24019e0f756e7f8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The values of this hash are strings, not lists of strings.
Enforce this by using the proper type instead of just using a comment.
Change-Id: Id8a13acdceb8f9f8a9a8eaa04e790b1e6cd5faa7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
of course, we should stub out everything related to TARGET - only the
generic "all" and "first" targets including their deps should be
emitted.
amends af2847260.
Change-Id: I8ed7a550b8022c69328d2e16dbd078928d176964
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
actually pack the extra compilers' input files, not the variable names.
unlike on unix, we don't create an actual distdir, so the package is
still going to be rather broken.
Change-Id: If0a15bbe9db95aebd88c2a21ca3c0f787ce5c7e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Replace which_dotnet_version with a simple function that converts the
value of MSVC_VER to its corresponding enum value in the VS project
generator.
This reduces the maintenance burden when adding support for a new VS
version, because we do not need to update the registry keys in
which_dotnet_version anymore.
The which_dotnet_version function implemented the following logic:
- find all installed VS versions via registry
- select the "best matching one"
- if there is no best match, select the VS that's in PATH
- create a project for that VS installation
The usefulness of this whole stunt is questionable as the VS version of
Qt's mkspec must match the version of a project using that Qt anyway.
Change-Id: I9fb9a099ee5ddb5fc4c450be4f68f41f2b406b9a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On the way to get rid of this function.
Have one place to determine the VS version instead of calling
this function over and over again (even though all calls but
the first are cheap).
Change-Id: Ic42a65df5a9bbe289f4813e4db85000dba15e672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make qmake understand the /DEBUG:FASTLINK option in QMAKE_LFLAGS, and
write the corresponding value correctly to VS 2015 project files.
Task-number: QTBUG-55591
Change-Id: I670375ed1523a5ab96bb3cce28635785564edba8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit 3d3d65f5 separated the PDB files for compiling and linking. Only
the PDB file the linker produces would be installed. However, this does
not work for static libraries as the LIB tool does not create a PDB file
from the compiler's PDB file. This patch turns the separation between
PDB files off for static libraries.
Task-number: QTBUG-56594
Change-Id: I08dcb7889c67b2f6370efa1ee19be8558355bbc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
With the removal of Windows CE support(52623d6d) the logic of these
checks have changed, as it was always true for non Windows CE builds
before.
This did not affect WinRT, as those mkspecs define VCPROJ_ARCH
explicitly in their qmake.conf.
Task-number: QTBUG-55753
Change-Id: Ie2eddf197c17fcbf7343b444cfe8940a332a545c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
The default ctor was also empty - removed, too.
Change-Id: I714db524f681f1fc250d21926245757e97351e87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Has a few too many fields for defining a member-swap
(which would be required to mark it shared).
Change-Id: Iecbeec9e60a9884cb4a984c58cb192918cef799d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I7e4b6d7f604020dd5e6da81f7a046202c8b78e09
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I9431311d24da802f147ce10e475936838bb85d41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Visual Studio automatically defines _WINDLL when building a DLL,
regardless of project settings
(https://msdn.microsoft.com/en-us/library/8x480de8.aspx). This define
is therefore widely used to detect DLL vs. static library or executable
build target on Windows.
For makefiles, _WINDLL need to be manually defined, which QMake failed
to do so far.
Task-number: QTBUG-55183
Change-Id: Ic62201666c44e730e6881706d568ce9eaf22b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
A bug in the Windows C Runtime causes text mode pipes to drop newlines
sometimes. This bug was hidden because of another bug in rcc which
caused newlines to be redundantly duplicated. When the latter bug was
fixed (commit 53d5811b) the former bug was exposed, causing invalid
vcxproj files to be generated. The Windows bug is described here:
https://connect.microsoft.com/VisualStudio/feedback/details/1902345
The workaround is to avoid text mode, and do the conversion of "\r\n"
to "\n" ourselves (which we were already doing anyway).
Change-Id: I792599a4cd7822f109fa921f02207fb1b144b1d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The two PDB files that the MSVC compiler and linker create are supposed
to be handled differently and should not share the same file path.
Using the same file path for both can result in corrupted PDB files and
longer build times.
Use $${TARGET}.vc.pdb in the OBJECTS_DIR for the compiler and
$${TARGET}.pdb (the default) for the linker.
Task-number: QTBUG-53895
Change-Id: I31f06d4a674a3aa2afe5b30499bae820e5caf2c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this introduces an ambiguity, so some char* arguments need explicit
QString construction now.
Change-Id: Ic3919a1fa9419bbb3b57dd1aa7eb95643ee59e53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
While previous SDKs used the form "CE_SDK (CE_ARCH)" in their
configuration/platform names, this is not true fo the Toradex SDK.
Inside Visual Studio the platform is only called "Toradex_CE800"
instead of "Toradex_CE800 (ARMV7)".
In order not to break other SDKs CE_PLATFORMNAME is introduced and
used in the wince80colibri-armv7-msvc2012 mkspec. If the variable
is set qmake uses it as the platform name in its vcproj generator.
Change-Id: Icb501bf6446a9f617745a0d2c7a80b240680b043
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Port the last four remaining Q_FOREACH users in qmake
and uic to C++11 range-for and mark all qtbase tools
(incl. qmake) as Q_FOREACH-free, using QT_NO_FOREACH.
Change-Id: Ief4e5877269e7a853e4cf05e58861a448e822d3d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This fix repairs the mechanism to deploy Qt dlls as well as C++ runtime
to a wince target in Visual Studio.
Do this by adding a deploy section in the Visual Studio solution and
adding the C++ runtime from the mkspec to the files deployed to the target.
Deploy target path is set to what the wizard of Visual Studio defaults to.
Before, the c++ runtime was only deployed for executables which were built
as part of Qt.
Task-number: QTBUG-50924
Change-Id: I478010dc16e35c68578281895aa3ae14b5c96bb4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
we can rely on the super class to get it right.
as a "side effect", we won't try to install .pdb files for aux projects
anymore - the duplicated conditional was incomplete.
Change-Id: I9b66f32ab50ed2a1d4e6e03a9d205686a4b4a981
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
They prevent move special member functions from
being synthesized by the compiler.
Change-Id: I90c4a6e286734ef3906ee833826bd3bfbdad3874
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Java-style iterators are slower than STL-style ones, so
they should not be used in library code.
Replaced them with C++11 range-for, STL iterators or, in
one case, qDeleteAll().
In one case, avoid a double hash lookup by using erase(it)
instead of remove(it.key()), which we can now do without
detaching, due to the new erase() taking const_iterator.
Change-Id: I96174657fed70f76120b2c9d8190b4e70d5d8179
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
In VcprojGenerator::collectDependencies(), a temporary QLinkedList
is created, then iterated over. There's no reason to use a node-
based container here: no references are taken, no erases happen,
esp. not in the middle...
Port to QVector instead and reserve it, since the maximum size is
known ahead of time, and the lifetime of the container is very
short.
Since the loop iterating over the linked list needed touching
anyway, port directly to C++11 range-for.
Change-Id: Ic5dfeebcd9da37c214f54abc6025a0a2b8fa3b5d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
(or trivially marked const) ... by replacing them
with C++11 range-for loops.
Change-Id: I1522e220a57ecb1c5ee0d4281233b3c3931a2ff8
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
To avoid detaches of these mutable Qt containers,
wrap the container in qAsConst().
Change-Id: If086bea06fe26232a7bb99fad8b09fce4dc74c27
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
This is the simplest of the patch series: Q_FOREACH took a
copy, so we do, too. Except we don't, since we're just
catching the return value that comes out of the function
(RVO). We can't feed the rvalues into range-for, because
they are non-const and would thus detach.
Change-Id: I5834620bf82f3442da7b2838363d351a0fb960a0
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
The functions QMakeProject::values(), QMakeMetaInfo::values()
and QHashIterator::value() all return by const-reference,
so they can be passed to range-for without further changes.
Change-Id: Ic3b39ed8ff8cd7a6f287f1aa9d61a1acd67d7aaa
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... iterate over the container itself instead. Avoids
temporary QList creation as well as the lookup cost
when actually calling value(key).
Change-Id: Icac867c30e63863cfa44a382eedd4d6df2070a59
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QFileInfo::exists(f) is somewhat faster than the version which creates an temporary object.
Change-Id: I5f931a86d9dfad57d99efe04ca115422de43def9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When building QNX on MS-Windows, make magically adds the Msys root as
prefix to variables whose values look like paths; this applies to both
environment variables and variables given values on the command-line.
When we don't actually want to install under the Msys root, this is
unwelcome "help". So (for MinGW's make) support a magic prefix of our
own, @msyshack@, that'll make a path value for INSTALL_ROOT not look
like a path to make; we can then strip it off when we come to use it.
Change-Id: I951ad3c8fe3e5cfb49e6e361d7fff779f3a9d716
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Having a precompiled header file without file extension (or without
common file extension) led to an incorrectly generated Visual
Studio project file. The custom build step for automatically
generating the corresponding source file was missing.
Remove the file extension check that apparently was yet another
feeble attempt of runtime optimization.
Task-number: QTBUG-50442
Change-Id: I0552f94be12cbb70e2f32c242c7364699979bd81
Reviewed-by: Karsten Heimrich <karsten.heimrich@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Previously the hardware and camera button handler were guarded inside a
Q_OS_WINPHONE which does not apply to Windows 10.
Instead use WINAPI_PARTITION_FAMILY like on other places, this covers
Windows Phone 8.1 as well as Windows 10.
To find windows.phone.ui.input.h at build time the Mobile Extension
directory needs to be added to the include paths inside qmake. On
runtime we need to check whether we have hardware buttons or not. In
case they exist, register the handlers, otherwise skip registration.
Skipping also helps to keep WACK succeeding.
Task-number: QTBUG-50427
Change-Id: Ibeae15dbde12553cebd2b73b1a40b754c014f426
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
