don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Update the flightinfo example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: I2395b37170565e922500e675210c400e90ae0f73
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the legacy grabber example to use the new QRegularExpression
class in place of the deprecated QRegExp.
Change-Id: I1d1871b7e82cdb214fdd8ad55a606d5e7682fab1
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the arthur code sample to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Ic7efd4466b4c0fa50170b80ebb22fcb3624399ce
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the codecs example to use the new QRegularExpression class in
place of the deprecated QRegExp.
Change-Id: Ibd60b7256071f8166c4bf38e6a40935494c3cf3f
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the settingseditor example to use the new QRegularExpression
class in place of the deprecated QRegExp.
Change-Id: I07e34bf916bdde161c4253fca70b853061cd589b
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the stylesheet example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: I7061b8fd462ff012cb67bfdade656b3bfe442dd8
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the classwizard example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: I125664549e249c4156f8c664fac7648f1c41f9d5
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the licensewizard example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Ib6e0ee9ec802e83540b1c37846b99378395fe0ec
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
The example has already been ported to QRegularExpression however part
of the documentation still referred to the QRegExp class. This patch
updates the documentation to match the new version of the code.
Change-Id: Id433d0b28deae0c4f702c0c54d2704174f8c7689
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the addressbook tutorial to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Ibea9252ab8fe1d12e6fc862fa70229ca6efe0804
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Update the network-chat example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Idcd3dc5b3e9b520b2eeef9565d50195cc8dffd06
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the code was broken since 5.0, as it still hardcoded the version number
4 for the plugin basenames.
wince is not supported any more, so there is no point in trying to
restore the code to function.
at a later point, we'll make QTPLUGIN universal enough to cover both
static and dynamic deployment.
Change-Id: I0911ce4aff7a799dd471d6218e046f13dca6d49e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We can use QOverload since Qt 5.7 (it depends on Q_COMPILER_VARIADIC_TEMPLATES
which is required since Qt 5.7).
Use it in the examples to show the best practice.
qOverload currently can't be used because it requires c++14.
Change-Id: I94a3c0db9d551fe169fa3d19c07ec0b329d5946c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Update URLs in jennifer.xbel and remove frank.xbel, which
has too many outdated URLs
Change-Id: I8cbc1e3988f45230f849e68202780c76cf4353d9
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
xcode variable expansion should be done exactly when xcode is used.
Change-Id: Icea8cb7bf9a51811052789bd66354b1b165127d6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a vestige from an earlier version of the watchos introduction.
amends 57378a108.
Change-Id: I7d15149b94d12d84e041079b563175bd4e385d50
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A separate flag is no longer needed now that simulator and device builds
are not exclusive any more (*) - both 'simulator' and 'device' being set
at the same time is a sufficient indication (uikit/default_pre.prf sets
this up according to the simulator_and_device feature and the
QMAKE_MAC_SDK variable).
(*) xcodebuild mode actually still uses exclusive builds, but this is
activated locally in uikit/default_post.prf, and uikit/xcodebuild.prf
implements the actual build passes manually anyway, so this change does
not affect it.
Change-Id: Idf173a7bfeb984498d3a49ed6b8d1a16da6c2089
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the opengl feature is defined in the gui module.
Change-Id: Ibf63395729540092ca82ee4ffc4e2ff4971c2a29
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Protection against short reads was already half implemented,
blockSize was being sent by the server but never used by the client.
Also, blockSize was bumped to quint32: If you're in a position where
short reads can happen then quint16 is probably not enough to hold the
size of your data. On Linux I could only reproduce short reads for
messages > 500K.
Change-Id: I191a3d781da1d8a119debbdafae641c8340a1da2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This example uses QProcess which is not available on UIKit platforms.
Change-Id: I126d20369ccf307579a60956de7769e92e17548a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
